Other Categories: |
Filter: All brands | Sort: Name | Price Highest First | Price Lowest First |
AutoExe Adjustable Stabilizer Link MSE7605 (Anti Roll (Sway/Stabiliser) Bars) | ITEM DETAILS | |
$ 127.85 |
AutoExe Club Sports SUS Kit MSE7970 (Coilover Kits) | ITEM DETAILS | |
Mono tube, full length height adjustable, fixed rate twin tube dampers. | $ 1423.82 |
AutoExe Floor Cross Bar MSE450 (Chassis Bars) | ITEM DETAILS | |
$ 113.54 |
AutoExe Low Down Spring MSE700 (Springs) | ITEM DETAILS | |
Lowering coil springs that are not too low and not too hard. Spring constant is calculated based on original damping ratio (balance between spring constant and damping force), allowing for natural handling without abrupt harshness. For an even more natural ride, it is recommended to use in these springs with an adjustable stabilizer link that corrects the arm angle of the stabilizer in accordance with the lowered vehicle height. | $ 167.61 |
AutoExe Mastervac Brace MSE495 (Brake Cylinder Stoppers) | ITEM DETAILS | |
Prevents distortion of the bulkhead between brake pedal and master cylinder during heaving braking. Delivers better, and more consistent brake pedal feel. | $ 144.39 |
AutoExe Member Brace Set MSY470 (Chassis Bars) | ITEM DETAILS | |
$ 389.29 |
AutoExe Motion Control Beam MSE4900 (Chassis Bars) | ITEM DETAILS | |
Item that reinforces the body and increases torsional rigidity. Features built in friction type vibration damping damper. | $ 519.69 |
AutoExe Sports Stabilizer MSE7600 (Anti Roll (Sway/Stabiliser) Bars) | ITEM DETAILS | |
$ 162.20 |
AutoExe Sports Tie Rod End MSE7A00 (Rods and Control Arms) | ITEM DETAILS | |
Correct tie rod angle when ride height is lowered to restore steering characteristics. | $ 127.85 |
AutoExe Street Sports SUS.Kit KIJIMA-SPEC MSE7850 (Coilover Kits) | ITEM DETAILS | |
Full length height adjustable, fixed rate twin tube dampers. | $ 986.68 |
AutoExe Strut Tower Bar MSY400 (Strut Tower Bars) | ITEM DETAILS | |
$ 194.64 |
AutoExe Tower Brace Set MSY480 (Old: MSE480) (Strut Tower Bars) | ITEM DETAILS | |
$ 412.19 |
AutoExe Ultimate Sports SUS.Kit MSY7960 (Coilover Kits) | ITEM DETAILS | |
The ultimate coilover setup for the street. Roll rigidity enhanced model. Full length height adjustable, fixed rate mono tube dampers. | $ 1998.34 |
Bee-R Yamaha Performance Damper (GL)SHCBBEEGEN01 (Chassis Bars) | ITEM DETAILS | |
Performance damper unit only. | $ 283.38 |
Blitz Damper ZZ-R 92763 (Coilover Kits) | ITEM DETAILS | |
Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | $ 725.42 |
Blitz Damper ZZ-R Spec-C 93126 (Coilover Kits) | ITEM DETAILS | |
Full length adjustable, single cylinder (monotube) coilover suspension with 2 way, 32 levels damper adjustment and separate tank. | $ 1516.39 |
Blitz Strut Tower Bar 96143 (Strut Tower Bars) | ITEM DETAILS | |
$ 78.59 |
Buddy Club P-1 Racing Nut (GL)SHWN-BUD-P1R-01 (Wheel Nuts) | ITEM DETAILS | |
Inconel 625 complexe alloy steel wheel nuts. | $ 33.33 |
CUSCO Racing Wheel Nut 00B 738 12516B (Wheel Nuts) | ITEM DETAILS | |
Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.81 |
CUSCO Stabiliser Bar 460 311 A28 (Anti Roll (Sway/Stabiliser) Bars) | ITEM DETAILS | |
Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $ 161.06 |
DG-5 Suspension Kit (GL)SHCODG5SE3P01 (Coilover Kits) | ITEM DETAILS | |
Coilover kit that adjusts to all driving styles, for street and track conditions. - 30 Step adjustable damper. - Enhanced strength utilising a 50/60mm diameter cylinder. Read more...- Superior strength steel brackets. - Adjustable upper mounts (Applicable models). - Additional helper/traction spring for improved tractability (Applicable models). - Highest quality Swift 65mm springs. | $ 1875.65 |
ENDLESS BASIC Brake Rotor ER315B x 2 (Brake Rotors) | ITEM DETAILS | |
FC Forged. Pair of 2. 1 piece brake rotors. Ideal for users who wish to use a higher quality brake rotors when replacing standard units. | $ 412.19 |
ENDLESS BASIC SLIT Brake Rotor ER315BS x 2 (Brake Rotors) | ITEM DETAILS | |
FC Forged (Heat treated). 1 (single) piece curving slit (Slotted) brake rotors. Ideal for users who wish to upgrade standard rotors for better stability/cooling performance in hard driving conditions. Read more...Pair of 2 (Left and right). ENDLESS blue high temp painted bell hats. Please note that shape and number of internal vanes varies between specific vehicle models. | $ 194.64 |
ENDLESS Brake Kit (Chibi Roku - 6 POT Compact Mini) EC5BSE3P (Brake Upgrade Kits) | ITEM DETAILS | |
Compact size 6POT caliper ideal for use with cars using standard wheel sizes (16inch etc). The main body is made of lightweight and highly rigid forged aluminum, which not only has excellent durability and heat resistance, but also improves controllability during braking. Read more...This caliper allows you to easily obtain the reliable braking performance and direct pedal touch that the multi-piston caliper brings. For use with standard rotors (Not included). 2 x Caliper, 2 x Stay, 2 x Brake hose, 1 x Brake pad (Set - Left and right, SSM PLUS/TYPE R/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 1259.78 |
ENDLESS Brake Lines (Swivel Racing Type) EB306 (Brake Lines) | ITEM DETAILS | |
Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Read more...Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $ 186.06 |
ENDLESS Brake Lines (Swivel Steel Type) EB306SS (Brake Lines) | ITEM DETAILS | |
Steel and stainless construction ensures durability and excellent reliability. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: Steel. Socket: Stainless. | $ 127.54 |
ENDLESS CC-Rg EP416CRG2 (Brake Pads) | ITEM DETAILS | |
Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Read more...Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 122.77 |
ENDLESS E-SLIT Brake Rotor ER315ES x 2 (Brake Rotors) | ITEM DETAILS | |
FC Forged. Pair of 2. 1 piece E-SLIT type (Slotted) brake rotors. Ideal for users who wish to improve lap times at the circuit and for better compatibility with higher performance brake pads. | $ 519.05 |
ENDLESS MX72 EP416MX72 (Brake Pads) | ITEM DETAILS | |
Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 129.13 |
ENDLESS MX72 PLUS EP416MXPL (Brake Pads) | ITEM DETAILS | |
Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 139.30 |
ENDLESS NEW Type R EP416TRN (Brake Pads) | ITEM DETAILS | |
Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Read more...Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | $ 89.69 |
ENDLESS RF-650 ORF-650500 (Brake Fluids) | ITEM DETAILS | |
Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 22.26 |
ENDLESS SSM PLUS EP416MP (Brake Pads) | ITEM DETAILS | |
Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 129.13 |
ENDLESS SSS EP416SS2 (Brake Pads) | ITEM DETAILS | |
Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 83.33 |
ENDLESS SSY EP416SY2 (Brake Pads) | ITEM DETAILS | |
Super Street Y-Sports. Street. Read more...Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.61 |
ENDLESS System Inch Up Kit (6 POT) EC6XSE3P (Brake Upgrade Kits) | ITEM DETAILS | |
6POT big caliper with excellent cost performance that can accommodate rotors up to 370mm rotors. Caliper body is made from lightweight and highly rigid forged aluminum. Uneven wear of the brake pads is prevented and high controllability is achieved through the use of varying pistons. Read more...These features combined ensure stable braking force even in high-power tuned cars, and is the best match for street-spec sports cars equipped with high-output engines. 2 x Caliper (Alumite Blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/TYPE R/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 1989.69 |
ENDLESS System Inch Up Kit (Chibi Roku - 6 POT Compact Mini) ECZ5XSE3P (Old: EC5XSE3P) (Brake Upgrade Kits) | ITEM DETAILS | |
Compact size 6POT caliper ideal for use with cars using standard wheel sizes (16inch etc). The main body is made of lightweight and highly rigid forged aluminum, which not only has excellent durability and heat resistance, but also improves controllability during braking. Read more...This caliper allows you to easily obtain the reliable braking performance and direct pedal touch that the multi-piston caliper brings. 2 x Caliper (Blue alumite), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/TYPE R/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2016.72 |
ENDLESS System Inch Up Kit (MONO 6 Sports TA) EF6XSE3P (Brake Upgrade Kits) | ITEM DETAILS | |
Updated version of MONO 6 Sports caliper. Using the latest processing technology, the outer brake fluid pipe has been eliminated as an obstruction to the flow path and prevents fluid leakage due to pipe breakage. Weight has been reduced and the stress balance has been improved (rigidity increased by 12%) compared to the original MONO 6 Sports caliper product. Read more...The caliper surface is 3D-cut, which is effective for heat dissipation while looking good. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit*), 1 x Brake pad (Set - Left and right, SSM PLUS/TYPE R/MX72/MX72 PLUS**). * Can be ordered with e-slit type rotors, please specify if required (additional cost). ** Other brake pad compounds available, please specify if required (additional cost). | $ 2530.37 |
ENDLESS System Inch Up Kit (Racing MONO 4) ED4XSE3P (Brake Upgrade Kits) | ITEM DETAILS | |
Low weight and highly rigid forged monoblock 4POT calipers. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (E Slit), 1 x Brake pad. Engraved ENDLESS logo. | $ 2800.70 |
ENDLESS System Kit (Chibi Roku - 6 POT Compact Mini) EC5SSE3P (Brake Upgrade Kits) | ITEM DETAILS | |
Compact size 6POT caliper ideal for use with cars using standard wheel sizes (16inch etc). The main body is made of lightweight and highly rigid forged aluminum, which not only has excellent durability and heat resistance, but also improves controllability during braking. Read more...This caliper allows you to easily obtain the reliable braking performance and direct pedal touch that the multi-piston caliper brings. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size, curving slit) (Standard size), 1 x Brake pad (Set - Left and right, SSM PLUS/TYPE R/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 1638.25 |
ENDLESS W-003 EP416W003 (Brake Pads) | ITEM DETAILS | |
Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 183.19 |
Garage Vary Universal Brake Duct Spoiler 30-4002 (Brake Ducts and Ducting) | ITEM DETAILS | |
Universal brake duct cooling air guides. Require modifications for fitting. | $ 69.52 |
GP Sports G-MASTER Premium Spec Suspension Kit 521303 (Coilover Kits) | ITEM DETAILS | |
DG-5 collaboration model for maximum drivability. | $ 1970.42 |
JIC Magic Rear Toe Control Arms RTASSE3P (Rods and Control Arms) | ITEM DETAILS | |
$ 416.19 |
JIC Magic Traction Rods TRASE3P (Rods and Control Arms) | ITEM DETAILS | |
$ 198.33 |
OHLINS Road & Track Complete Kit (GL)SHCOOHLSE3P01 (Coilover Kits) | ITEM DETAILS | |
$ 1904.30 |
Project μ (Mu) B-SPEC F445-BSP (Brake Pads) | ITEM DETAILS | |
Street Sports. Reliable braking power and fade resistance suitable for sports driving, all at a reasonable price. Read more...Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 75.76 |
Project μ (Mu) BESTOP F445-BESTOP (Brake Pads) | ITEM DETAILS | |
Genuine type. Asbestos free. 0~380°C. Friction coefficient: 0.30~0.38. | $ 41.41 |
Project μ (Mu) D1 Spec R433-D1SP (Brake Pads) | ITEM DETAILS | |
Competition. Asbestos free. 0~380°C. Friction coefficient: 0.50~0.55. | $ 56.68 |
Project μ (Mu) D1 Spec EXTREME R433-D1EX (Brake Pads) | ITEM DETAILS | |
Competition. Carbon metal. 50~550°C. Friction coefficient: 0.48~0.59. | $ 75.76 |
Project μ (Mu) D1 Spec ZERO F445-D1Z (Brake Pads) | ITEM DETAILS | |
Achieves brake control according to pedaling force by reducing changes in effectiveness and touch with respect to temperature. A low mu model that specializes in controllability in extreme conditions during drifting. Competition. Super Graphite Metallic. 0~550°C. Friction coefficient: 0.27~0.34. | $ 75.76 |
Project μ (Mu) FS44 Forged Sports Caliper Kit 4pistons x 4pads FS44-Z102A (Brake Upgrade Kits) | ITEM DETAILS | |
The ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Read more...Caliper size: Total length : 282.8mm / Total width : 156.25mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Includes Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $ 1786.14 |
Project μ (Mu) FS44S Forged Sports Caliper Kit 4pistons x 4pads SLIM FS44S-Z102 (Brake Upgrade Kits) | ITEM DETAILS | |
Slim body greatly reduces caliper interference with wheels, thus making the 4Pistons x 4Pads SLIM model ideal for extreme applications. Maintains the ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Read more...Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 140.2mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Kit includes: Caliper bodies, aluminum brackets, brake pads (NS-C*), 2-piece rotors, Teflon brake lines, pad support springs and other fitting parts. * Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $ 1728.89 |
Project μ (Mu) NS-C F445-NSC (Brake Pads) | ITEM DETAILS | |
Street. Non steel. 0~400°C. Friction coefficient: 0.34~0.38. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $ 66.22 |
Project μ (Mu) RACING 777 F445-R777 (Brake Pads) | ITEM DETAILS | |
Circuit Race. Carbon metal. 300~800°C. Friction coefficient: 0.40~0.55. | $ 123.47 |
Project μ (Mu) RACING 999 F445-R999 (Brake Pads) | ITEM DETAILS | |
Circuit Race. Carbon metal. 200~800°C. Friction coefficient: 0.42~0.59. | $ 123.47 |
Project μ (Mu) RACING-N+ F445-RacingNplus (Brake Pads) | ITEM DETAILS | |
Circuit Race. Super Graphite Metallic. 100~800°C. Friction coefficient: 0.39~0.48. | $ 113.92 |
Project μ (Mu) RACING-N1 F445-RN1 (Brake Pads) | ITEM DETAILS | |
Circuit Race. Carbon metal. 100~800°C. Friction coefficient: 0.33~0.45. | $ 113.92 |
Project μ (Mu) Resevoir Tank Cover ACC-TC03 (Other) | ITEM DETAILS | |
  | $ 12.72 |
Project μ (Mu) SCR PRO GPRZ025 (Brake Rotors) | ITEM DETAILS | |
2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Read more...Bell housings: Super hard aluminium alloy. Suitable for circuit use. Pair of 2 (Left and right). | $ 453.21 |
Project μ (Mu) SCR Pure Plus 6 SPPZ106-S6 (Brake Rotors) | ITEM DETAILS | |
1 piece type. Curved slit (slotted). 6 per side. FC cast iron. Street use. Up to 600°C. Pair of 2 (Left and right). | $ 152.66 |
Project μ (Mu) Type HC-CS F445-CS (Brake Pads) | ITEM DETAILS | |
Hyper Carbon - Circuit Spec. Street Sports. Carbon metal. 50~800°C. Friction coefficient: 0.41~0.50. | $ 113.92 |
Project μ (Mu) Type HC-M1 F445-HCM1 (Brake Pads) | ITEM DETAILS | |
Hyper Carbon M1. The flagship model of the HC series that covers everything from city driving to sports driving. In addition to the linear effect of the pedal control, it exhibits outstanding and stable braking power in the high temperature range. Read more...These pads have been finished with specifications that suppress dust as much as possible among graphite metal materials. Street Sports. Super graphite metallic. 50~800°C. Friction coefficient: 0.41~0.55. | $ 123.47 |
Project μ (Mu) Type HC+ F445-HCPL (Brake Pads) | ITEM DETAILS | |
Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. | $ 113.92 |
Project μ (Mu) Type PS F445-PS (Brake Pads) | ITEM DETAILS | |
Street Sports. Perfect Spec. Providing adequate braking power for street sports driving, while also being low dust and noise. Read more...Brake pedal feel and control performance are high across a wide range of light to heavy vehicle applications. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 99.61 |
RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (GL)SHWNRAYGEN40 (Wheel Nuts) | ITEM DETAILS | |
Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 84.35 |
RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (GL)SHWNRAYGEN05 (Wheel Nuts) | ITEM DETAILS | |
Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 115.77 |
RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (GL)SHWNRAYGEN30 (Wheel Nuts) | ITEM DETAILS | |
Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 138.73 |
RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (GL)SHWNRAYGEN15 (Wheel Nuts) | ITEM DETAILS | |
Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 114.56 |
RAYS FORMULA Series Formula Nut FN-II Set (GL)7414-1215-Orange (Wheel Nuts) | ITEM DETAILS | |
$ 158.70 |
RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) 7413 74130000206BK (Wheel Nuts) | ITEM DETAILS | |
Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 28.08 |
RAYS RACING Series Racing Bolt Set 7413 74130000307BK (Wheel Nuts) | ITEM DETAILS | |
Chrome molybdenum steel (SCM435) wheel bolts. | $ 30.25 |
RAYS RACING Series Racing Lock Nut Set (Open End Type) 7413 74130000251BK (Wheel Nuts) | ITEM DETAILS | |
Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 36.19 |
RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) 7413 74130000012BK (Wheel Nuts) | ITEM DETAILS | |
Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 28.18 |
RAYS RACING Series Racing Nut Set (Open End Type) 7415 74130000224BK (Wheel Nuts) | ITEM DETAILS | |
Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.65 |
ROBERUTA Cup Kit (GL)SHOTROB-GEN-01 (Other) | ITEM DETAILS | |
Mechanical lifter kit. | $ 2103.87 |
RS-R RS-R Down Suspension Coil M056D (Springs) | ITEM DETAILS | |
$ 99.99 |
RS-R Ti2000 Suspension Coil M056TD (Springs) | ITEM DETAILS | |
Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. | $ 156.29 |
TEIN MONO FLEX GSM56-F1SS4 (Coilover Kits) | ITEM DETAILS | |
$ 1263.66 |
TEIN Type FLEX DSM56-61SS4 (Coilover Kits) | ITEM DETAILS | |
$ 1045.09 |
TRUST GReddy Resevoir Tank Cover 18001897 (Other) | ITEM DETAILS | |
Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.30 |
WORK Duralumin Lock & Nut Set (GL)WNWKGEN01 (Wheel Nuts) | ITEM DETAILS | |
$ 93.51 |
AutoExe Sports Suspension Kit MSE7800 (Coilover Kits) | ITEM DETAILS | |
DISCONTINUED |
ENDLESS CC-A EP416CCA (Brake Pads) | ITEM DETAILS | |
Street. Ceramic Carbon Metal. 50~480°C. Average friction coefficient: 0.38~0.45. | DISCONTINUED |
ENDLESS CC-R EP416CCR (Brake Pads) | ITEM DETAILS | |
Winding road/circuit. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | DISCONTINUED |
ENDLESS CC-X EP416CCX (Brake Pads) | ITEM DETAILS | |
Winding road/circuit. Ceramic Carbon Metal. 50~700°C. Average friction coefficient: 0.38~0.50. | DISCONTINUED |
ENDLESS MA22B EP416MA22B (Brake Pads) | ITEM DETAILS | |
Circuit. Hardened Ceramic Metal. 200~800°C. Average friction coefficient: 0.40~0.45. | DISCONTINUED |
ENDLESS MXRS EP416MXRS (Brake Pads) | ITEM DETAILS | |
Street~circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.38~0.47. | DISCONTINUED |
ENDLESS NS97 EP416NS97 (Brake Pads) | ITEM DETAILS | |
Street. Low steel (non-asbestos). 0~500°C. Average friction coefficient: 0.37~0.43. | DISCONTINUED |
ENDLESS SNP EP416SNP (Brake Pads) | ITEM DETAILS | |
Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
ENDLESS SSM EP416SSM (Brake Pads) | ITEM DETAILS | |
Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
ENDLESS System Inch Up Kit (MONO 6 Sports) EF6XSE3P (Brake Upgrade Kits) | ITEM DETAILS | |
2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | DISCONTINUED |
ENDLESS Type R EP416TR (Brake Pads) | ITEM DETAILS | |
Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
JIC Magic Camber Arms CAMSE3 (Rods and Control Arms) | ITEM DETAILS | |
DISCONTINUED |
MOONFACE Super Lap Bump Adjust Tie Rod Ends STE53 (Rods and Control Arms) | ITEM DETAILS | |
DISCONTINUED |
Project μ (Mu) BOOM WAGON F445-BoomWagon (Brake Pads) | ITEM DETAILS | |
A standard model that compensates for shortages in braking force and provides stable performance. Street. Non steel. 0~450°C. Friction coefficient: 0.36~0.43. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | DISCONTINUED |
Project μ (Mu) COMP-B for Gymkhana F445 GYM (Brake Pads) | ITEM DETAILS | |
Compound dedicated to the gymkhana competition, pursuing the pleasure of freely controlling the vehicle. Competition. Carbon metal. Front: 0~450°C. Friction coefficient: 0.38~0.49. Rear: 0~400°C. Friction coefficient: 0.48~0.60. | DISCONTINUED |
Project μ (Mu) COMP-B for Gymkhana (Rear Metal) R433-CompBGymRearMetal (Brake Pads) | ITEM DETAILS | |
Competition. Sintered metal. 0~500°C. Friction coefficient: 0.50~0.62. | DISCONTINUED |
Project μ (Mu) D1 Spec F F445-D1SpecF (Brake Pads) | ITEM DETAILS | |
Maximised controllability during drift, with this specialised model designed for front brakes. Through reduced effect temperature to pedal touch, these pads deliver more linear performance, resulting in greater brake control. Competition. Super Graphite Metallic. 0~550°C. Friction coefficient: 0.29~0.34. | DISCONTINUED |
Project μ (Mu) LEVEL MAX500 F445-LevelMax500 (Brake Pads) | ITEM DETAILS | |
Circuit Sports. Carbon metal. 0~500°C. Friction coefficient: 0.41~0.47. | DISCONTINUED |
Project μ (Mu) LEVEL MAX700 F445-LevelMax700 (Brake Pads) | ITEM DETAILS | |
Circuit Sports. Carbon metal. 50~700°C. Friction coefficient: 0.43~0.51. | DISCONTINUED |
Project μ (Mu) LEVEL MAX900 F445-LevelMax900 (Brake Pads) | ITEM DETAILS | |
Circuit Sports. Carbon + Titanium + Ceramic. 0~900°C. Friction coefficient: 0.40~0.60. | DISCONTINUED |
Project μ (Mu) LEVEL MAX900i F445-LevelMax900i (Brake Pads) | ITEM DETAILS | |
Circuit Sports. Carbon metal. 100~900°C. Friction coefficient: 0.45~0.60. | DISCONTINUED |
Project μ (Mu) M SPEC F445-Mspec (Brake Pads) | ITEM DETAILS | |
Street. Asbestos free. 0~500°C. Friction coefficient: 0.31~0.40. | DISCONTINUED |
Project μ (Mu) NS-ZERO F445-NSZero (Brake Pads) | ITEM DETAILS | |
Street. Asbestos free. 0~400°C. Friction coefficient: 0.32~0.37. | DISCONTINUED |
Project μ (Mu) RACING SINTERED F455-RacingSintered (Brake Pads) | ITEM DETAILS | |
Circuit Race. Sintered metal. 350~1000°C. Friction coefficient: 0.35~0.40. | DISCONTINUED |
Project μ (Mu) Type NR F445-NR (Brake Pads) | ITEM DETAILS | |
Street Sports. Asbestos Free. 0~600°C. Friction coefficient: 0.33~0.43. | DISCONTINUED |
Project μ (Mu) Type NS F445-NS (Brake Pads) | ITEM DETAILS | |
Street. Asbestos free. 0~400°C. Friction coefficient: 0.37~0.42. | DISCONTINUED |
PROVA Resevoir Tank Cover 90000JL0200 (Other) | ITEM DETAILS | |
Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. Read more...The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
RAYS DURA Series Duralumin Lock & Nut Set (GL)SHWNRAYGEN50 (Wheel Nuts) | ITEM DETAILS | |
Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
RAYS FORMULA Series Formula Nut Set (GL)SHWNRAYGEN01 (Wheel Nuts) | ITEM DETAILS | |
DISCONTINUED |
TRUST GReddy Performance Damper Type-S 14042202 (Coilover Kits) | ITEM DETAILS | |
Sports suspension kit suitable for enjoying the circuit, while maintaining ride quality around town on the streets. Linear damping force, supporting the stable driving. A wide range of damping characteristics makes it possible to achieve both supple ride comfort, and sports performance. | DISCONTINUED |