| Categories: | |
![]() | Apex APEXi AVC-R (Boost Controllers) -420-A004 | |
| Acutator Valve Controller Type-R. | DISCONTINUED |
![]() | Blitz A/F Box (Boost Controllers) -15063 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
![]() | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | |
| High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
![]() | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | |
| High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
![]() | Blitz External Voltage Input Harness (Boost Controllers) -15053 | |
| Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | € 24.36 |
![]() | Blitz Press Sensor Set (Boost Controllers) -19211 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | € 67.66 |
![]() | Blitz Remote Switch (Boost Controllers) -15045 | |
| DISCONTINUED |
![]() | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | |
| Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-Color Spec S (Boost Controllers) -15080 | |
| Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec R (Boost Controllers) -15078 | |
| Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec S (Boost Controllers) -15073 | |
| Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC Type R (Boost Controllers) -15039 | |
| High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S (Boost Controllers) -15040 | |
| High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S PLUS (Boost Controllers) -15044 | |
| High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | DISCONTINUED |
![]() | Blitz SBC-DC (Boost Controllers) -15060 | |
| DISCONTINUED |
![]() | Blitz SBC-iD III (Boost Controllers) -15085 | |
| Twin sequential solenoid. | DISCONTINUED |
![]() | Blitz Temp Sensor Set (Boost Controllers) -19210 | |
| Optional part for use with SBC i-Color. One set per SBC i-Color. | € 67.66 |
![]() | Blitz Wireless Remote Switch (Boost Controllers) -15042 | |
| Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
![]() | HKS EVC (Old) (Boost Controllers) -45003-AK001 | |
| 4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | |
| 4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
![]() | HKS EVC Display Stand (Boost Controllers) -53002-AK001 | |
| For use with display of HKS EVC. | € 7.38 |
![]() | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | |
| Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | € 73.81 |
![]() | HKS EVC EZ II (Boost Controllers) -45003-AK002 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC V (Boost Controllers) -45003-AK005 | |
| 5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC VI (Boost Controllers) -45003-AK010 | |
| 6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
![]() | HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | |
| DISCONTINUED |
![]() | HKS EVC VI-IR (Boost Controllers) -45003-AK011 | |
| 2.2 inch full colour TFT screen. | DISCONTINUED |
![]() | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | |
| 2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | DISCONTINUED |
![]() | HKS EVC VII (Boost Controllers) -45003-AK013 | |
| 7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | € 319.85 |
![]() | HKS EVC VII Option Parts (Boost Controllers) -45999-AK029 | |
| Option/Repair parts for use with HKS EVC VII. | € 20.18 |
![]() | HKS EVC-S (Boost Controllers) -45003-AK009 | |
| DISCONTINUED |
![]() | HKS EVC-S2 (Boost Controllers) -45003-AK015 | |
| The simple-to-operate boost controller EVC-S has evolved with a color LCD for excellent visibility. The display area is doubled compared to the previous EVC-S. A variety of displays that utilize dot displays enable intuitive operation and improve operability. Displays the function of each button during setup (button information display) and supports modification operations. Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D) making it easy to select boost according to the conditions. New features include circuit mode and scramble mode (Controlled by switching between two of the four boost settings) (Scramble mode is switched according to the set time). Added overtime setting to warning function - Warning control will not start unless the warning value has exceeded a set time, so the range of adjustment for warning control has been expanded. The maximum control boost is 250kPa and supports a wide range of boost control. Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting. | € 245.06 |
![]() | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | |
| DISCONTINUED |
![]() | TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | |
| For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | |
| For use of Profec E-01 pressure sensor with e-Manage. | € 9.99 |
![]() | TRUST GReddy Profec (Boost Controllers) -15500214 | |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | € 258.74 |
![]() | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | |
| DISCONTINUED |
![]() | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | |
| Can be used in conjunction with Trust e-Manage. | DISCONTINUED |
![]() | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | |
| Repair /service part for Profec (OLED screen). | € 10.01 |
![]() | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | |
| DISCONTINUED |
![]() | TRUST GReddy Profec White (Boost Controllers) -15500219 | |
| Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
![]() | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | |
| For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
![]() | Apex APEXi AFC Neo (Engine Management) -401-A018 (Old: 401-A017) | |
| Colour Display Airflow Converter. Does not include APEXi General Purpose Stand. | DISCONTINUED |
![]() | Apex APEXi EL FC Commander More Info (Engine Management) -415-A030 | |
| APEXi Power FC (Full Computer) control unit. EL backlit version. For use with APEXi Power FC. If purchasing separately from Power FC, please supply Power FC serial number. | € 234.11 |
![]() | Apex APEXi FC Commander More Info (Engine Management) -415-N001 | |
| APEXi Power FC (Full Computer) control unit. For use with APEXi Power FC. If purchasing separately from Power FC, please supply Power FC serial number. | DISCONTINUED |
![]() | Apex APEXi Power FC More Info (Engine Management) -4E14N02Z | |
| DISCONTINUED |
![]() | Apex APEXi Power FC (Special Edition) More Info (Engine Management) -(GL)ELEMAPXPFCSPL05 | |
| Special consignment model. FC Commander not included. | DISCONTINUED |
![]() | Apex APEXi Power FC Boost Controller Kit More Info (Engine Management) -415-A001 | |
| Optional kit designed to control boost through the Power FC. Simple connection to the Power FC allows the user to access a full self-learning boost controller. The Power FC allows up to 4 different boost presets for any stage of driving. The high grade solenoid valve is the same one used in our Super AVC-R boost controller. As with the S-AVCR, the Boost control kit allows increased boost response and boost stability at high RPM. If purchasing separately from Power FC, please supply Power FC serial number. | € 234.11 |
![]() | Apex APEXi Power FC Idle D-Kit (Engine Management) -499-X001 / 49C-A002 | |
| For Power FC to use mass air pressure sensor reading as opposed to air flow meter at idle. | DISCONTINUED |
![]() | Apex APEXi Power FC Pro Spec.CPU More Info (Engine Management) -CA181PRO | |
| For Drag. | DISCONTINUED |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | |
| Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz R-FIT (Engine Management) -15120 | |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | € 25.71 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | € 25.71 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Type II for Turbo (Engine Management) -16401306 | |
| For use with Trust GReddy e-Manage Ultimate. -99~3.0kPa. | € 71.72 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | |
| For use with Trust GReddy e-Manage Ultimate. | € 44.66 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | € 25.71 |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | € 314.62 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | € 162.39 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | |
| DISCONTINUED |
![]() | Bee-R Rev Limiter (Other Controllers) -(GL)ELOTBESKY01 | |
| € 166.94 |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | € 121.79 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | |
| Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | € 22.33 |
![]() | Blitz E-ESC (Other Controllers) -16087 | |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | HKS SLD (Other Controllers) -4502-RA002 | |
| Speed Limit Defencer. | € 71.84 |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | € 87.96 |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | |
| € 71.72 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | |
| € 112.32 |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Retractor Half Unit RHU-M (Other Controllers) -RHU-M | |
| Allows adjustment of headlight from closed to 80% open from the driver's seat on applicable vehicles. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | |
| Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | € 172.13 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | |
| DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | € 18.24 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | |
| DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | |
| For use with Okachan Water Temp oC. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP (Performance Meters) -405-A012 | |
| The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. This new aesthetically pleasing model was crafted to match the likes of other highly popular APEXi electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of APEXi's line up. The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km/h b 0 times, user defined Mid Range Acceleration, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For acceleration and timing accuracy.), and Vehicle weight input. One of the most exiting of the new features is the option to utilize the revolutionary APEXi G-Sensor (Sold separately.). The G Sensor allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G on the race track, or used in an array of new features including: Highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, Horse Power Calculation, and Loss Power Calculation. By taking advantage of the optional G Sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel-spin. Using the G Sensor modifies the speed sensor signal, compensating for wheel-spin and producing impeccably accurate acceleration times. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP G-Sensor (Performance Meters) -430-A013 | |
| An added feature to the Rev Speed Meter GP, the G-Sensor unit allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G's on the race track, or used in an array of new features including: highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, horse power calculation, and loss power calculation. By taking advantage of the optional G-sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel spin. The G-sensor modifies the speed sensor signal, compensating for wheel spin and producing impeccably accurate times. For use with APEXi Rev/Speed Meter GP (Sold separately). | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP Shift Lamp (Performance Meters) -430-A011 | |
| With the optional shift indicator light, you can easily incorporate shift points into an A'PEXi Rev Speed Meter-GP (Sold separately). | DISCONTINUED |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | |
| DISCONTINUED |
![]() | ARK Design Meter Stand (Performance Meters) -01-0106X-L | |
| DISCONTINUED |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | |
| DISCONTINUED |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | |
| DISCONTINUED |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | |
| Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | € 509.30 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | |
| For use with HKS A/F Knock Amp 2/3. | € 139.81 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | |
| For use with HKS A/F Knock Amp 2/3. | € 52.16 |
![]() | HKS CAC Cute (Performance Meters) -44007-AK002 | |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | € 164.97 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | |
| DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | |
| € 65.20 |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | |
| Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | € 596.77 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | |
| Part included with A/F Device (repair part). | € 304.47 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | |
| Part included with A/F Device (repair part). | € 109.61 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | |
| Part included with A/F Device (repair part). | € 17.05 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | |
| DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Intelligent Informeter (Performance Meters) -16001601 / 16001600 | |
| D46×W100×H20 mm. Black or white - please specify when ordering. | DISCONTINUED |
![]() | TRUST GReddy Intelligent Informeter Nissan NON-OBD Harness (Performance Meters) -16401700 | |
| For use with Old type Nissan coupler equipped vehicles. | DISCONTINUED |
![]() | TRUST GReddy Intelligent Informeter Sensor Adapter (NON OBD) (Performance Meters) -16401705 | |
| Option part for use with TRUST Intelligent Informeter TOUCH (Ver1.05 and above) and Nissan NON-OBD Harness. For use with sensor sets (sold separately). Not suitable for use in conjunction with TRUST Serial Signal Harness. | DISCONTINUED |
![]() | TRUST GReddy Intelligent Informeter Sensor and Harness Set (Performance Meters) -16401800 | |
| For use with TRUST Intelligent Informeter Sensor Adapter. | € 73.07 |
![]() | TRUST GReddy Intelligent Informeter TOUCH (Performance Meters) -16001604 | |
| D75×W107×H16 mm. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | |
| For NA and Turbo. | DISCONTINUED |
![]() | Apex APEXi Auto Timer Harness (Turbo Timers) -416-N002 | |
| Discontinued. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | HKS Turbo Timer Harness (Turbo Timers) -4103-RN002 | |
| Turbo Timer Harness makes it easy and safe to install HKS Turbo Timers. Take out the key switch wiring connector and connect the HKS Turbo Timer Harness for easy and reliable connection. For use with HKS Turbo Timer Type 0/Type 1/X. | € 11.81 |
![]() | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | |
| DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | |
| DISCONTINUED |
![]() | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | |
| 10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | € 53.64 |
![]() | PIVOT ATT (Turbo Timers) -ATT | |
| Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | |
| DISCONTINUED |
![]() | PIVOT SAT (Turbo Timers) -SAT | |
| Security Auto Timer. | DISCONTINUED |
![]() | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT TTX (Turbo Timers) -TTX | |
| Ultra compact design. | DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | |
| DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | |
| Separate type. | DISCONTINUED |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | |
| DISCONTINUED |
![]() | FET QRS III (Boss Kits) -FQS005 | |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | € 172.84 |
![]() | FET QRS III Steering Plate (Boss Kits) -FQS006 | |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | |
| € 15.99 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | |
| DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | |
| For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | € 232.57 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | € 31.87 |
![]() | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | € 198.99 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | € 43.67 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | € 59.36 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | € 214.85 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | € 270.03 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | € 198.43 |
![]() | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | € 117.48 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | € 226.42 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | € 154.00 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | |
| Steering wheel quick release system for competition cars. | € 203.60 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | € 302.01 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | € 17.84 |
![]() | NISMO 260 km/h Speedometer (Clusters and Cluster Gauges) -24820-RN520 | |
| DISCONTINUED |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | |
| Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | |
| DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | |
| DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | |
| € 1494.69 |
![]() | BRIDE Dress Up Floor Mat (Floor Mats) -FN001A (Old: 1801(1)) | |
| € 156.24 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | € 46.96 |
![]() | Bee-R Meter Hood (Gauge Mounts) -(GL)INGMBEES1301 | |
| € 178.07 |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | |
| € 16.73 |
![]() | BORDER Hood Meter Panel (Carbon) (Gauge Mounts) -ME.FU.S13-Carbon52 | |
| Hood type, mounted above main instruments. | DISCONTINUED |
![]() | BORDER Hood Meter Panel (FRP) (Gauge Mounts) -ME.FU.S13-FRP52 | |
| Hood type, mounted above main instruments. | € 200.68 |
![]() | BORDER TRI-EYE Meter Panel (Inner Type) (Gauge Mounts) -ME.3R.S13 | |
| Inner glove box type. Gauges offset for ease of reading by driver. Glove box can be opened and closed. Right hand drive models only. Gauges sold separaetly. | € 139.94 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | |
| On dash type. | € 115.95 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | GR 3 Gauge Meter Panel (Gauge Mounts) -(GL)INGMGRS1301 | |
| Holds 3 x 60mm gauges. Includes double sided tape and tapping screws. | € 62.37 |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | |
| € 11.69 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | |
| € 7.81 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | |
| € 31.68 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | |
| DISCONTINUED |
![]() | KSP Engineering Attain 60mm Triple Meter Panel (Gauge Mounts) -KS-4496 | |
| € 177.76 |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Double) (Gauge Mounts) -16020011 | |
| 60mm, RHD only. | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | |
| DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | |
| Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | |
| € 65.20 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | CUSCO Spin Turn Knob (Hand Brake Accessories) -220 014 AR | |
| Push button to elminate hand brake lock and pull out to lock. Aluminium. | € 17.96 |
![]() | NISMO Racing Harness (Harnesses) -86844-RR010 | |
| 4 point. Rotary buckle. Includes 4 eye bolts. Made by WILLANS. As used in NISMO Super GT (GT500) race car. FMVSS209/FIA compliant. | DISCONTINUED |
![]() | NISMO Racing Harness Competition Model (Harnesses) -86844-RR030 | |
| 6 point. Rotary buckle. Includes 6 eye bolts (7/16 UNF, bolt length23mm). 2 inch belts. Made by SABELT. As used in NISMO Super GT and WEC race cars. FIA8853-2016/FIA compliant. | € 415.19 |
![]() | NISMO Racing Harness GT500 (Harnesses) -86844-RR020 | |
| 6 point. Billet aluminium special rotary buckle. Includes 6 eye bolts (7/16 UNF, bolt length23mm). 2 inch belts. Made by SABELT. As supplied to only several NISMO Super GT and WEC race race teams. FIA8853-2016/FIA compliant. | € 1660.77 |
![]() | NISMO Sports Harness (Harnesses) -86844-RR040 | |
| Four point sport harness is for drivers who want to enjoy serious circuit runs. This harness can be attached without extensive modifications, with an aluminium adjuster designed for easy use. Shoulder belts have original NISMO logo patches, the same ones as the used on NISMO Racing Harnesses. Made by Sabelt. 3 inch belts (Red). FIA 8854/98 compliant. | € 348.76 |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | |
| € 495.65 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | |
| DISCONTINUED |
![]() | Project μ (Mu) Shoulder Pads (Harnesses) -ACC-SP01 | |
| Seat belt pad. Pair of 2. | € 40.97 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | |
| € 107.95 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | |
| € 113.49 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | |
| DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | € 237.58 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | € 353.53 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | |
| Set of 2. | € 18.82 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | |
| 4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | € 473.32 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | € 370.91 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | € 476.24 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | |
| Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -16500101 | |
| Pair. | DISCONTINUED |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | |
| 4 x 4 point harness. | DISCONTINUED |
![]() | Bee-R Carbon Door Lining (Interior Linings/Skins) -(GL)INILBEES1301 | |
| Interior door cards. | € 297.65 |
![]() | NISMO Racing Fashion Lighter (Red) (Other) -25335-RN030 | |
| Cigarette lighter. Includes sticker set. | DISCONTINUED |
![]() | OKUYAMA CARBING Driver Foot Rest (Other) -313 111 0 | |
| € 70.06 |
![]() | OKUYAMA DASH Heel Adjust Plate (Other) -315 111 0 | |
| Driver's side floor plate. RHD vehicles only. | € 79.47 |
![]() | OKUYAMA CARBING Passenger Plate More Info (Other) -420 001 0 | |
| 3mm aluminium. Attatched to floor carpet by velcro tape. | € 105.61 |
![]() | NEOPLOT Foot Rest Bar NEO (Pedals) -NP72250 | |
| Adjustable foot position. Right hand drive models only. | DISCONTINUED |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | € 44.63 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | |
| € 31.55 |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | |
| DISCONTINUED |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | € 59.66 |
![]() | Prodrive Competition Seat (Seats) -55660011 | |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
![]() | ARC Titan Shift Knob (Round) (Shift Knobs) -19002-AA029 | |
| Titanium shift knob. 45mm diameter. | € 134.34 |
![]() | NISMO Aluminium Shift Knob (Black Alumite) (Shift Knobs) -C2865-1EA01 (32865-RN005) | |
| € 44.90 |
![]() | NISMO Aluminium Shift Knob (Carbon) (Shift Knobs) -C2865-1EA07 (32865-RN009) | |
| € 61.02 |
![]() | NISMO Aluminium Shift Knob (Chrome) (Shift Knobs) -C2865-1EA00 (32865-RN004) | |
| € 37.67 |
![]() | NISMO Duracon Shift Knob (Shift Knobs) -C2865-1EA04 (32865-RN006) | |
€ 39.92 |
![]() | NISMO GT Shift Knob (Titanium) (Shift Knobs) -32865-RN017-10 | |
| Shift knob as used in the Super GT Series GT-500 racecars. Made from titanium for its sleek feel, this shift knob is a perfect fit to any palm giving you superlative grip. Engraved current NISMO logo. Height: 63mm, diameter 37mm. | € 114.41 |
![]() | NISMO GT Shift Knob (Titanium) (Old Version) (Shift Knobs) -32865-RN013 | |
| Shift knob as used in the Super GT Series GT-500 racecars. Made from titanium for its sleek feel, this shift knob is a perfect fit to any palm giving you superlative grip. Embossed with NISMO logo. Height: 63mm, diameter 37mm. Weight: 210g. | DISCONTINUED |
![]() | NISMO GT Shift Knob (Urethane) (Shift Knobs) -32865-RN018-10 | |
| Shift knob as used in the Super GT Series GT-500 racecars. Made from shock absorbing urethane, this shift knob is a perfect fit to any palm giving you superlative grip. Engraved current NISMO logo. Height: 63mm, diameter 37mm. | DISCONTINUED |
![]() | NISMO GT Shift Knob (Urethane) (Old Version) (Shift Knobs) -32865-RN011 | |
| Shift knob as used in the Super GT Series GT-500 racecars. Made from shock absorbing urethane, this shift knob is a perfect fit to any palm giving you superlative grip. Embossed with NISMO logo. Height: 63mm, diameter 37mm. Weight: 130g. | DISCONTINUED |
![]() | NISMO Leather Shift Knob (Shift Knobs) -32865-RN003 | |
| DISCONTINUED |
![]() | NISMO Titanium Shift Knob (Shift Knobs) -C2865-1EA06 (32865-RN008) | |
| Billet Titanium. | DISCONTINUED |
![]() | TRUST GREX Shift Knob (Shift Knobs) -14520501 | |
| DISCONTINUED |
![]() | TRUST GReddy Shift Knob A Type More Info (Shift Knobs) -14500571 (GSK-A01) | |
| Height adjustable aluminium shift knob. Includes 5 types of shift pattern sticker. | € 47.67 |
![]() | TRUST GREX Type SH Shift Knob (Shift Knobs) -14520530 | |
| Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
![]() | TRUST GREX Type SL Shift Knob (Shift Knobs) -14520531 | |
| Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
![]() | C's Short Stroke Shift (Shifter Kits) -111080 | |
| DISCONTINUED |
![]() | IKEYA FORMULA Sequen Shifter (Shifter Kits) -IFBJ01000 | |
| Changes the normal shift pattern to sequential "I" (forwards and backwards) pattern. Full bolt on installation. Shift Indicator sold separately. | € 841.46 |
![]() | IKEYA FORMULA Sequen Shifter Boot (Shifter Kits) -(GL)IFBJ01000-BOOT | |
|   | € 64.15 |
![]() | IKEYA FORMULA Sequen Shifter Indicator (Shifter Kits) -(GL)IFBJ01000-SHIFT-S | |
| Option part for use with IKEYA FORMULA Sequen Shifter. Displays current gear. | € 138.71 |
![]() | NISMO Solid Shifter Kit (Shifter Kits) -32839-RN540 | |
| Decreased deflection (compared to standard shift lever) through the use of hardened inner rubber. Lever length reduced by approx 7.5mm, providing a 10% shorter stroke. Changes the soft feel of the standard shift lever to a much more precise, fast feeling. While the goal was to make for a quicker shift, NISMO avoided going as far as the "Quick Shift" in this model in order to avoid the tigh feeling that can be sometimes experienced. Unlike the quick shift, the lever ratio has not been changed, so the transmission synchros are not effected while moderately fast shifting is possible. Installation is simple, as it is a replacement of the standard item. | € 87.71 |
![]() | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
![]() | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | |
| D shape steering wheel. | € 442.87 |
![]() | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | |
| Round shape steering wheel. | € 522.84 |
![]() | MOMO MOD.08 (Steering Wheels) -M-58 | |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | € 145.84 |
![]() | Nardi Personal Blitz (Steering Wheels) -P071 | |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
![]() | Nardi Personal Blitz Leather (Steering Wheels) -P075 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | € 215.90 |
![]() | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | € 271.87 |
![]() | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | € 219.59 |
![]() | Nardi Personal Neo Grinta (Steering Wheels) -P024 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | € 261.42 |
![]() | Nardi Personal Pole Position (Steering Wheels) -P002 | |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | € 198.68 |
![]() | Nardi Classic Punching Leather (Steering Wheels) -N005 | |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | € 198.68 |
![]() | Nardi Classic Smooth Leather (Steering Wheels) -N111 | |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | € 271.87 |
![]() | Nardi Classic Suede Leather (Steering Wheels) -N115 | |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | € 198.68 |
![]() | Nardi Personal Trophy (Steering Wheels) -P051 | |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | € 235.28 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | € 198.68 |
![]() | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | |
| Steering boss (hub) kit is required for installation (Sold separately). | € 338.30 |
![]() | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | € 339.84 |
![]() | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | € 287.56 |
![]() | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | |
| Steering boss (hub) kit is required for installation (Sold separately). | € 261.42 |
![]() | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | € 37.09 |
![]() | Apex APEXi Power Intake Kit More Info (Air Filters) -507-N003 | |
| Air filter with minimal air-flow restriction. Dual funnel filter system minimizes intake turbulence. Vehicle specific kits include adapters and other fitting parts. The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spotsb within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is touble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. | € 80.58 |
![]() | Blitz Advance Power Cleaner More Info (Air Filters) -42010 | |
| Superceding the BLITZ Sonic Power Cleaner, the new Blitz Advance Power Cleaner uses a stainless steel mesh filter that produces high inhalation efficiency and racy intake sound. Cooling shield with large diameter funnel shields radiant heat from the engine bay, preventing heat soak of the filter. By suppressing the rise in the temperature of the filter, high filling efficiency is maintainted providing a stable suction temperature. With the variable shield structure, it is possible to secure a large amount of air around the filter, and it is effective for instantaneous increase of intake air. Large diameter funnels efficiently supply a large amount of air, achieving high suction efficiency. Cooling shield made of aluminum, with blue anodized lock plate. | DISCONTINUED |
![]() | Blitz Cleaner R-FIT Set (Air Filters) -34010 | |
| SUS Power Air Cleaner (Blue) and R-FIT Set. | € 194.86 |
![]() | Blitz Sonic Power Air Cleaner (Air Filters) -58010 | |
| DISCONTINUED |
![]() | Blitz SUS Power Air Cleaner More Info (Air Filters) -26010 | |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | DISCONTINUED |
![]() | Blitz SUS Power Core Type LM More Info (Air Filters) -56010 | |
| Filter colour: blue. | DISCONTINUED |
![]() | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59010 | |
| Filter colour: red. | DISCONTINUED |
![]() | HKS Super Power Flow (Old) (Air Filters) -1504-SN002 | |
| DISCONTINUED |
![]() | TRUST GReddy AIRINX B-Type (Air Filters) -12521001 | |
| Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | DISCONTINUED |
![]() | Apex APEXi Power Intake Filter More Info (Air Filters (Panel/OEM) Type) -503-N101 | |
| Factory replacement filter featuring: Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt. Dry-type filter element requires no oiling, and will not foul air flow sensors. Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed. Easy intallation, cleaning, and maintenance. | € 29.25 |
![]() | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -SN-24B 59515 | |
| Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | € 24.76 |
![]() | HKS Super Air Filter More Info (Air Filters (Panel/OEM) Type) -70017-AN101 | |
| New standard (stock) replacement type air filter utilizing newly developed dry non-woven fabric filter. High dust collection capacity and low resistance are implemented together at a high level. | € 23.40 |
![]() | TRUST GReddy AIRINX GT (Air Filters (Panel/OEM) Type) -12522501 (NS-1GT) | |
| High performance standard replacement (drop in) air cleaner/filter. Special high performance dry type fiber filter drastically improves intake efficiency. High rigidity and durability are achieved by using a steel net laminate structure. Rubber frame provides excellent sealing performance, keeping dust out. High performance and high quality, at a reasonable price. Direct swap for the genuine (stock) air filter, and can be easily replaced. | € 28.45 |
![]() | TRUST GRACER AIRINX II (Air Filters (Panel/OEM) Type) -12520001 (NS-1) | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | |
| DISCONTINUED |
![]() | Blitz Super Sound Blow Off Valve BR (Blow Off Valves and Kits) -70610 | |
| Vehicle specific kit. Super Sound Blow Off Valve BR (Blow Response). High quality aluminum die-cast body. High precision CNC machining optimizes the clearances, achieving smooth and responsive piston movement. The piston itself has a coating to improve corrosion resistance, as well as providing excellent lubrication performance even in tight clearances. Special black coating and anodized red highlights are resistant to corrosion and ideal for dressing up the engine room. Revision of the venturi design of the funnel has increased the flow rate by 17%, while creating a sharper, more powerful opening sound than the previous model. | € 161.22 |
![]() | Blitz Super Sound Blow Off Valve DD Kit (Blow Off Valves and Kits) -70010 | |
| DISCONTINUED |
![]() | Blitz Super Sound Blow Off Valve VD Kit More Info (Blow Off Valves and Kits) -70110 | |
| Vehicle specific kit. Venturi Drive valve. Employs the dual drive mechanism from the previous Super Sound Blow Off Valve DD. Funnel is venturi shaped to create sharp, dynamic sound. High quality die cast aluminium. Dissipates heat effectively through the ribs on the main body and funnel. 36mm big valve (with rubber) ensures sealing even in high boost applications. Piston is coated with special lubricating agent to prevent dirt/dust from damaging the piston. | DISCONTINUED |
![]() | HKS Super SQV Kit (Blow Off Valves and Kits) -1421-SN001 | |
| DISCONTINUED |
![]() | SARD R2D2 Blow Off Valve Kit (Blow Off Valves and Kits) -66121 | |
| Racing Blow Off Twin Drive Type-2 (Angle Type). | DISCONTINUED |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | |
| DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | |
| Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV2 (Blow Off Valves and Kits) -11501672 | |
| Universal. Blow off valve unit only. GReddy Blow Off Valve FV2 inherits the floating valve structure that was popular in the previous model, while being improved with a more sophisticated design providing better maintainability and reliability. A fidget spinner is used to adjust the spring preload without tools and the hose union direction of the top cover can be adjusted 360° without tools. Can directly replace GReddy Blow Off Valve Type RS, RZ, and FV as the mounting flange and opening have the same dimensions. | € 161.00 |
![]() | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | |
| Universal. Blow off valve unit only. | € 148.79 |
![]() | TRUST GReddy Blow Off Valve Type S Adapter Set (Blow Off Valves and Kits) -11521000 | |
| Vehicle specific kit. | DISCONTINUED |
![]() | ARC Super Induction Box (Induction Boxes and Ducts) - | |
| Includes filter(s). | DISCONTINUED |
![]() | D.Speed Intake Pipe (Piping) -(GL)INPI-DSP-S13G-01 | |
| € 123.70 |
![]() | East Bear Intercooler Piping Kit Version 2 (Piping) -(GL)EBINIPS13D002 | |
| Piping for use with front mounted R32 or R33 Nissan Skyline GT-R intercooler core (not included). | DISCONTINUED |
![]() | ARC Super Induction Box Replacement Filter (Replacement Filters) -19001-20089 | |
| Replacement filter for ARC Super Induction Box. | € 57.20 |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | € 461.32 |
![]() | TOMEI EXPreme Ti Titanium Cat Straight Pipe (Catalytic Converters / Straight Pipes) -431103 | |
| € 200.52 |
![]() | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A001 | |
| The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | |
| DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | |
| DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | € 38.07 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | € 205.81 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | |
| € 12.73 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | € 10.43 |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | |
| Universal gear oil cooler kit. | € 627.40 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | |
| Universal differential oil cooler kit. | € 758.11 |
![]() | ARC Intercooler Kit (Standard Replacement Type) (Intercoolers) -M075S13G03 | |
| DISCONTINUED |
![]() | HKS R TYPE Intercooler Kit (Intercoolers) -1301-RN084 | |
| R TYPE is designed for circuit use; ideal to use with a stock replacement type turbine to wastegate type large size turbine. This intercooler derives better turbine performance regardless the engine rpm during driving on a straight track and acceleration after cornering. The weight is approximately 25% lighter than a conventional product. Core features: 1. Inner Fins (triangular straight type) - Triangular straight type for less air flow pressure loss. 2. Outer Fins (triangular louver type) - Like S TYPE, triangular louver type for outer fins. Aluminium polished piping type kits available for some models. | DISCONTINUED |
![]() | HKS S TYPE Intercooler Kit (Intercoolers) -1301-RN086 | |
| S TYPE is designed for street use; ideal for stock vehicles, lightly tuned vehicles, and for vehicles with stock replacement type turbines. The engine response under street driving and performance at a mid to high speed range are well-balanced. Core features: Inner fins 1. Short type - We have adopted short type that the pitch is optimized for fin shape, for small and light to improve the cooling efficiency. 2. Triangular straight type - We adopted triangular straight type for less pressure loss of air flow. Outer Fins (triangular louver type) - Cooling efficiency improved with louver because of the shorter length and angle of the fin. - Wide surface of louver make it more efficient in cooling. Aluminium polished piping type kits available for some models. | DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit (Intercoolers) -12020001 | |
| Recommended for sports turbine~full tune applications. Lightweight intercooler core (tube type, offset inner fin) design focused on cooling efficiency, maximizing filling efficiency (reduced pressure loss), in high power/high boost. - SPEC-R HG: Mirror finish side tanks, buff finish aluminium piping. - SPEC-R: barrel finish tanks and aluminium piping. Cores are CCP treated for increased corrosion resistance. | DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit SPEC-R HG (Intercoolers) -12020401 | |
| DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit SPEC-V (Intercoolers) -12020400 | |
| DISCONTINUED |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Kit (Oil Filter Relocation Type) (Oil Coolers) -12024401 | |
| Oil cooler and filter relocation kit. | DISCONTINUED |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | € 23.00 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | |
| 1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | |
| 1 piece. | DISCONTINUED |
![]() | TRUST Gear Oil Pump (Other) -12004820 | |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | € 250.96 |
![]() | TRUST GReddy Oil Element Relocation Kit (Other) -12024900 | |
| Oil filter relocation kit. | DISCONTINUED |
![]() | TRUST GReddy Washer Tank (Other) -13506101 | |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | € 27.68 |
![]() | Apex APEXi GT-Spec Radiator Cap (Radiator Caps) -591-A001 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | HKS Radiator Cap More Info (Radiator Caps) -15009-AK004 | |
| Silicone rubber seal improves sealing properties. This radiator cap can support the reliable cooling performance under severe driving conditions. | € 19.25 |
![]() | NISMO Racing Radiator Cap (Radiator Caps) -21430-RS013 (Old: 21430-RS012) | |
| 45mm. 1.3 kg/cm2 (0.13Mpa). Silicone gum seal. | € 21.77 |
![]() | TRUST GReddy Radiator Cap (Radiator Caps) -13901002 | |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | € 19.07 |
![]() | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901000 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | APP Radiator Hose System (Radiator Pipes and Hoses) -NZ006D-UR | |
| Stainless mesh braided radiator hose. Billet aluminium mechanical clamp fittings. Reduces chances of hose breakage and coolant leaks, especially under harsh operating conditions (high engine rpm etc). | € 97.55 |
![]() | SAMCO Sport Coolant Hose Kit (Radiator Pipes and Hoses) -40TCS85/C | |
| Handmade silicon hoses, trusted in motorsports applications globally. Laminated structure and layered fibres within the silicon boasts outstanding strength, suppressing heat expansion. The material use is more resilient to corrosion and deterioration. Multiple colour options available. | € 105.06 |
![]() | ARC Radiator Hood Panel (Radiator Shrouds (Hoods)) -SHPRPS1304 | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Radiator Cooling Plate (Radiator Shrouds (Hoods)) -421 014 0 | |
| Attached to the upper part of the radiator and the upper part of the front grill, the radiator cooling plate closes the gap between the main radiator body and the front grill. This increases the volume of air flowing through the radiator, increasing cooling efficiency. It also provides an aesthetically pleasing touch to the engine bay. | € 84.70 |
![]() | KOYO Type-R Radiator (Radiators) -(021)KA020172 | |
| Copper 3 row core (41 or 49mm wide depending on application). Brass tanks. Named Type-R for "Racing", this radiator type adopts KOYO's 3 row core with excellent thermal conductivity. Suitable for highly tuned engines. | € 334.31 |
![]() | KOYO Type-S Radiator (Radiators) -(020)PA020172 | |
| Copper 2 row core (27 or 32mm wide depending on application). Brass tanks. Increased capacity for light tune engines. Easy, bolt on installation (replacing standard radiator), this product represents excellent cost performance. | € 167.00 |
![]() | KOYO Type-Z Radiator (Radiators) -(022)KL020172 | |
| Aluminium 2 row 53mm (wide) core. All aluminium type. Top level cooling performance while still being light weight. With heat dissipation up up to 35% greater than standard radiators, it is perfect for high power, full tune engines. | € 349.38 |
![]() | SARD Sports Radiator (Radiators) -29119 | |
| Low cost, high performance brass radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). | DISCONTINUED |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | € 89.80 |
![]() | Billion Super Thermo (Thermostats) -BSN-03 | |
| Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | € 44.93 |
![]() | SARD Cooling Thermo (Thermostats) -19422 | |
| Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | € 39.06 |
![]() | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | |
| Universal transmission oil cooler kit. | € 810.39 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | |
| Universal compact transmission oil/power steering fluid cooler. | € 313.70 |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | |
| Universal transmission or differential oil cooler kit. | € 512.38 |
![]() | Power Enterprise Super Kevlar II Timing Belt (Belts and Chains) -BN111 | |
| Stretch resistant - Maintains long-term performance. Significant improvements against belt tooth failure and cut resistance. Drives camshafts accurately. | DISCONTINUED |
![]() | Power Enterprise Super Kevlar V Belt (Belts and Chains) -4PK855-Blue | |
| Compared to standard belts, Power Enterprise Super Kevlar V Belts are: 4 times more heat resistant. 3 times more resistant to slip. 2 times less abrasive. | DISCONTINUED |
![]() | TRUST GReddy Heavy Duty Timing Belt (Belts and Chains) -13524502 | |
| Extreme Timing Belt. Engineered to increase heat-resistance, flexibility and durability, TRUST GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consistent and last longer. | DISCONTINUED |
![]() | JUN Strengthened Valve Guide (Camshaft and Valvetrain Parts) -1008M-N001 | |
| Heavy duty racing valve guide set. | € 154.51 |
![]() | JUN Titanium Valve Retainers (Type 1) (Camshaft and Valvetrain Parts) -1005M-N002 | |
|   | € 230.05 |
![]() | JUN Titanium Valve Retainers (Type 2) (Camshaft and Valvetrain Parts) -1005M-N202 | |
| Treated surface for better wear resistance. | € 303.24 |
![]() | Real Speed Engineering Solid Lifters (Camshaft and Valvetrain Parts) -RA307A-NS11A | |
| € 132.86 |
![]() | Real Speed Engineering Valve Springs (Camshaft and Valvetrain Parts) -RA304A-NS11A | |
|   | € 110.72 |
![]() | TOMEI Shim Set for clearance measurement (Camshaft and Valvetrain Parts) -163012 x 2 | |
| Test shim set. | € 104.51 |
![]() | TOMEI Solid Lifter (Camshaft and Valvetrain Parts) -163007 | |
| € 173.40 |
![]() | TOMEI Valve Springs (Camshaft and Valvetrain Parts) -13203R410 | |
| € 139.63 |
![]() | JUN Cam Slide Sprocket (Camshaft Pulleys and Sprockets) -1006M-N002 | |
| Adjust the best valve timing when you change camshaft and/or do engine tuning. Able to correct off valve timing according to resurfacing cylinder head when overhaul. JUN Cam Slide Sprockets have marks for every 4 degrees of crank duration (Majority of applications). | DISCONTINUED |
![]() | TOMEI Adjust Pulley (Camshaft Pulleys and Sprockets) -152008 | |
| Adjustable Cam Gear. | DISCONTINUED |
![]() | HKS Camshaft (Camshafts and Camshaft Kits) -2202-RN101 | |
| DISCONTINUED |
![]() | JUN Camshaft (Camshafts and Camshaft Kits) -1004M-N030 | |
| € 215.90 |
![]() | Real Speed Engineering SPEC-S Camshaft (Camshafts and Camshaft Kits) -RA301D-NS11A | |
| € 160.54 |
![]() | Real Speed Engineering SPEC-R Camshaft (Camshafts and Camshaft Kits) -RA301C-NS11A | |
| € 160.54 |
![]() | Real Speed Engineering SPEC-S Camshaft Set (Camshafts and Camshaft Kits) -RA301B-NS11A | |
| € 321.08 |
![]() | Real Speed Engineering SPEC-R Camshaft Set (Camshafts and Camshaft Kits) -RA301A-NS11A | |
| € 321.08 |
![]() | TOMEI PROCAM Camshaft (Camshafts and Camshaft Kits) -1441256085 | |
| DISCONTINUED |
![]() | TOMEI PONCAM Camshaft and Pulley Kit (Camshafts and Camshaft Kits) -143025 + 153020 | |
| PONCAM Intake and exhaust camshafts. | DISCONTINUED |
![]() | TOMEI PROCAM Camshaft and Pulley Kit (Camshafts and Camshaft Kits) -IN + EX + 153020 | |
| PROCAM Intake and exhaust camshafts and pulleys. | DISCONTINUED |
![]() | TOMEI PONCAM Camshaft Kit (Camshafts and Camshaft Kits) -143025 | |
| PONCAM Intake and exhaust camshafts. | DISCONTINUED |
![]() | TOMEI Forged H-Beam Conrod Kit (Connecting Rods and Parts) -1241003201 | |
| DISCONTINUED |
![]() | TRUST GReddy Connecting Rod Bolt Set (Connecting Rods and Parts) -13900511 x 8 | |
| For use with TRUST H Cross section billet type connecting rods. | DISCONTINUED |
![]() | TRUST GReddy Connecting Rod Set (Connecting Rods and Parts) -13525400 | |
| DISCONTINUED |
![]() | TOMEI CA20 Forged Full Counter Weight Crankshaft (Crankshafts) -121018 | |
| DISCONTINUED |
![]() | NISMO Engine Mount (Engine Mounts) -11210-RS520 | |
€ 70.12 |
![]() | HPI Stainless Exhaust Manifold (Exhaust Manifolds (Turbo)) -HPEX-CA18TA42 | |
| SUS304. | € 697.52 |
![]() | Kazama F-1 Manifold (Exhaust Manifolds (Turbo)) -(GL)ENEMKAZS1301 | |
| DISCONTINUED |
![]() | TRUST GReddy Sus. Turbo Ex. Manifold (Exhaust Manifolds (Turbo)) -10521055 | |
| Stainless steel turbo exhaust manifold. Design layout with runners as close equal length within the space constraints of the of the engine bay, optimising turbo efficiency. Main pipe diameter and the waist gate line diameter are designed to efficiently spool the turbo. | € 909.73 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | |
| DISCONTINUED |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | |
| DISCONTINUED |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | |
| DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | |
| DISCONTINUED |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | |
| DISCONTINUED |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | |
| € 3.94 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | |
| € 189.76 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | € 53.24 |
![]() | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | € 139.63 |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | € 88.45 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | € 79.96 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | € 153.16 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | € 36.11 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | € 115.33 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | € 87.04 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | |
| € 276.80 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | |
| Mount bracket. | € 32.11 |
![]() | HKS Head Gasket More Info (Gaskets) -2301-RN043 | |
| Head gasket that ensures that contact surface pressure is spread as evenly as possible, adapts quickly to the ever changing gaps that can appear in the contact surface in order to maintain a good seal, with good pressure. | DISCONTINUED |
![]() | TOMEI Head Gasket (Gaskets) -11044R471G | |
| DISCONTINUED |
![]() | TRUST GReddy Metal Head Gasket (Gaskets) -13521316 | |
| DISCONTINUED |
![]() | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900537 | |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | € 110.29 |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | |
| Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | € 88.08 |
![]() | HKS Twin Power Harness (Ignition System Parts) -4399-SN003 | |
| Car specific harness. | DISCONTINUED |
![]() | HKS Twin Power TYPE-DLI (Ignition System Parts) -43001-AK001 | |
| Twin Power high performance ignition system. High powered tuned engines can cause ingnition system issues. The Twin Power can solve all these problems and maximiz potential engine power. Full transistor type: Long duration of discharge to obtain stable combustion at a low RPM. CDI System: Fast initial rise of current discharge so it has strong ignition energy which is good for high RPM. | DISCONTINUED |
![]() | OKADA Projects Plasma Booster (Ignition System Parts) -SB214500B | |
| High power amplifier which drastically boosts ignition coil current. With an increase in spark current, the ignition process is faster and it also creates a faster burn, thus leading to more horsepower and torque. Complete ignition decreases the incidence of "hot spots" in the combustion chamber and lowers the risk of detonation. Simple installation, only 2 wires on distributor type ignition. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Compatible with OBD-II (On-Board-Diagnostics). | € 232.51 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | |
| DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | |
| DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | |
| DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | |
| DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SplitFire Ground Wire (Ignition System Parts) -GWN-001 | |
| The high performance electric flow system. | DISCONTINUED |
![]() | SplitFire Super Direct Ignition System More Info (Ignition System Parts) -SPI-DIS-LD1 | |
| Replaces standard coil and ignition wiring with a direct coil on plug system (direct from ECU) for stable and maximum energy supply to the spark plugs across the rpm range. | DISCONTINUED |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | |
| DISCONTINUED |
![]() | NISMO 555cc Injector (Injectors) -16600-RR420 | |
| NISMO injectors the same shape as standard injectors, installation is as simple as replacing the existing injectors. | DISCONTINUED |
![]() | NISMO 600cc Injector (Injectors) -16600-RRR60 | |
| NISMO injectors the same shape as standard injectors, installation is as simple as replacing the existing injectors. | DISCONTINUED |
![]() | SARD 1000cc Injector (Injectors) -63518 | |
| DISCONTINUED |
![]() | SARD 534cc Injector (Injectors) -63501 | |
| DISCONTINUED |
![]() | SARD 650cc Injector (Injectors) -63563 | |
| DISCONTINUED |
![]() | SARD 660cc Injector (Injectors) -63502 | |
| DISCONTINUED |
![]() | SARD 700cc Injector (Injectors) -63500 | |
| DISCONTINUED |
![]() | SARD 800cc Injector (Injectors) -63566 | |
| DISCONTINUED |
![]() | CUSCO Oil Catch Tank More Info (Oil Breather Tanks) -220 009 A | |
| Car specific kit. | € 62.25 |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | |
| Universal kit. 1000ml. | € 90.42 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | |
| Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | |
| Hose for use with TRUST GReddy Breather Tanks. | € 10.64 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | |
| Universal kit. 680ml. | € 85.19 |
![]() | NISMO Oil Filter (Oil Filters) -15208-RN021 | |
| 21% less pressure loss, 24% increase in filtration, 10% less flow resistance and 37% increased life. | € 13.47 |
![]() | NISMO Veruspeed Oil Filter (Oil Filters) -15208-RN020 | |
| 21% less pressure loss, 24% increase in filtration, 10% less flow resistance and 37% increased life. | DISCONTINUED |
![]() | SARD Sports MAG+ Oil Filter (Oil Filters) -SMF02 | |
| € 19.84 |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 0W-20 SL/CF. 4 litres. | € 65.82 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 5W-30 SL/CF. 4 litres. | € 65.82 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 10W-40 SL/CF. 4 litres. | € 65.82 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 15W-50 SL/CF. 4 litres. | € 65.82 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | |
| Power steering fluid tank. | DISCONTINUED |
![]() | NAPREC Crankshaft Socket (Other) -(GL)ENOTNAPSR01 | |
| Increase work efficiency during engine assembly/disassembly. | € 61.02 |
![]() | TODA High Power Profile Piston Kit (Piston Kits and Parts) -13010-CA1-8T0 | |
| Forged piston kit. | DISCONTINUED |
![]() | TOMEI Forged Piston Kit (Piston Kits and Parts) -1141840012 | |
| Kit includes pistons, piston rings, pins and circlips. | € 564.66 |
![]() | TOMEI Forged Piston Kit CA18DET Repair Parts (Piston Kits and Parts) -1141840014 | |
| Parts for repair/overhaul of TOMEI Forged Piston Kit. | € 162.94 |
![]() | TRUST GReddy Forged Piston Set (Piston Kits and Parts) -13525800 | |
| DISCONTINUED |
![]() | JUN Reinforced Head Bolts (Reinforced Bolts) -1027M-N009 | |
| € 127.02 |
![]() | HKS Super Fire Racing M (Spark Plugs) -50003-M35 | |
| M Series. Improved ignition performance, durability and anticarbon build-up. The Ultimate sparkspark plug for increasing performance of tuned or stock engines. Iridium and platinum spark plug. | € 12.18 |
![]() | HKS Super Fire Racing Pro (Spark Plugs) -5408-R40 | |
| Centre electrode: Iridium 0.4mm. Tip: Platinum 0.8mm. | DISCONTINUED |
![]() | HKS Super Fire Racing S (Spark Plugs) -5408-S30 | |
| S Series. Iridium spark plug. | DISCONTINUED |
![]() | NISMO Racing Spark Plug (Spark Plugs) -22401-RS238-7 | |
| Used in N1 racing. Better ignition performance and reduced electric discharge voltages. Made by NGK. | € 19.87 |
![]() | TRUST GReddy Racing Plug (Iridium Tune) (Spark Plugs) -13000066 | |
| These spark plugs are designed standard to highly modified engines. The center electrode on these plugs are iridium alloy, which provide stronger spark even at lower voltage, beneficial for creating power and response. 0.6mm high refraction iridium alloy center electrode. Nickel “project type” ground electrode. NA engines can expect an increase across the rpm range, and turbo engines can expect lower end torque. Sold individually (Single unit). | DISCONTINUED |
![]() | TRUST GReddy Racing Plug PRO (Spark Plugs) -13000107 | |
| Iridium center electrode and platinum outer electrode. Sold individually (Single unit). | DISCONTINUED |
![]() | TRUST GReddy Racing Plug PRO (Platinum) (Spark Plugs) -13000118 | |
| Designed to dissipate extra heat created by increased horsepower engines. This plug type has high durability for wide range of high heat conditions. 0.8mm platinum center electrode and nickel outer electrode. Sold individually (Single unit). | € 14.33 |
![]() | TOMEI CA20KIT for Turbo (Stroker Kits) -221015 | |
| DISCONTINUED |
![]() | TOMEI Special Flywheel (Stroker Kits) -12310R410 | |
| DISCONTINUED |
![]() | TRUST GReddy Turbo Kit (Wastegate Type) (Turbocharger Kits) -11520001 | |
| Full external wategate type turbocharger kit. High grade product for customer who wants ideal engine tuning. Using a special stainless steel exhaust manifold and intake piping to suit the redesigned layout. Piping modifications are not necessary (some models may require slight adjustments). This kit is intended for full-fledged engine tuning for use in conjunction computer tuning, high-performance intercooler, and other supporting engine parts (Not included). | DISCONTINUED |
![]() | HPI Turbo Outlet (Turbocharger Outlets and Parts) -HPTO-S13 | |
| € 175.43 |
![]() | HPI Wastegater Type Turbo Outlet (Turbocharger Outlets and Parts) -HPTW-S13 | |
| € 180.65 |
![]() | HKS Actuator Upgrade Kit (Wastegates and Actuators) -1430-RN003 | |
| DISCONTINUED |
![]() | NISMO Clutch Hose (Clutch Hoses) -46211-RS520 | |
| Steel braided hose. | € 36.60 |
![]() | OS Giken Super Single (Aluminium Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SSA-OHA | |
| € 233.12 |
![]() | OS Giken Super Single (Press Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SS-OHA | |
| € 233.12 |
![]() | OS Giken TS2B Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2B-OHA | |
€ 336.77 |
![]() | OS Giken TS2BD Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2BD-OHA | |
€ 359.83 |
![]() | NISMO Big Operating Cylinder (Clutch Parts) -30620-RS520 | |
| Oversize slave/release cylinder. Reduces pedal load when using a sports clutch, improves half engaged clutch operating characteristics, and provide proper clutch connection position. 13/16inch (20.54mm) diameter (Std: 3/4inch, 19.05mm). Reduces pedal pressure by as much as 14% compared to standard part. Not suitable for use with NISMO Sports Clutch Kits (Not enough stroke). | € 71.35 |
![]() | NISMO Heavy Duty Clutch Pedal Bracket (Clutch Parts) -46550-RS520 | |
| Provides more rigid feel from less flex compared to standard, often experienced during Competitive driving while using heavy duty clutches or multiplate clutches. . | DISCONTINUED |
![]() | NISMO Heavy Duty Release Pivot (Clutch Parts) -30537-RS540 | |
| Chromoly steel pivot designed to withstand the increased load when using heavy duty clutch covers and multiplate clutches. 30% stronger than standard carbon steel pivots. | € 21.41 |
![]() | CUSCO Clutch Cover (Clutches) -00C 022 B006 | |
| DISCONTINUED |
![]() | CUSCO Copper Disc (Clutches) -00C 022 R220 | |
| Copper clutch disc. | € 137.78 |
![]() | CUSCO Metal Disc (Clutches) -00C 022 C202N | |
| Metal clutch disc. | € 127.94 |
![]() | ORC Metal Series ORC-409 (Clutches) -ORC-409-03N | |
| Single Plate Clutch. ~420N/m(43kgf/m). | € 522.84 |
![]() | OS Giken Release Sleeve Bearing Set (Clutches) -(GL)DTCLOSG-S13G-TS2B-FITKIT | |
| For fitting of OS Giken multi plate clutches (Where not included). | € 40.60 |
![]() | OS Giken Super Single (Clutches) -(GL)DTCLOSG-S13G-SSP | |
| The Super Single clutch kit was designed to provide power holding performance for your simple bolt on equipped vehicle. This kit should also be able to handle the heat capacity requirements of track and aggressive use. For a balance of performance and longevity, this clutch is ideal for applications with less than 400 lb/ft (540 N/m, 55 kg/m) of torque. | € 491.10 |
![]() | OS Giken TS2B More Info (Clutches) -(GL)DTCLOSG-S13G-TS2B | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. 204mm discs. 9,800N/m (1,000kgf/m). For applications with less than 550 lb/ft (745 N/m, 76 kg/m) of torque. | € 742.73 |
![]() | OS Giken TS2BD More Info (Clutches) -(GL)DTCLOSG-S13G-TS2BD | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. Damper type 204mm discs. 9,800N/m (1,000kgf/m). For applications with less than 550 lb/ft (745 N/m, 76 kg/m) of torque. | € 826.69 |
![]() | TODA Non Asbestos Clutch Disc (Clutches) -22200-CA1-80N | |
| DISCONTINUED |
![]() | CUSCO LSD Type MZ More Info (Differentials) -LSD 264 E | |
| LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | € 703.67 |
![]() | CUSCO LSD Type MZ Spec F More Info (Differentials) -LSD 264 ET | |
| Flat Friction Disc Type (For smoother/milder actuation). LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | € 639.70 |
![]() | CUSCO LSD Type RS More Info (Differentials) -LSD 264 F | |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | € 703.67 |
![]() | CUSCO LSD Type RS Spec F More Info (Differentials) -LSD 264 FT | |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | € 639.70 |
![]() | KAAZ LSD (Differentials) -SBN2635 | |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | € 517.61 |
![]() | NISMO GT LSD (Differentials) -38420-RS015-C | |
| Cam angle (Drive/Coast degrees) - 1.5 Way: 55/1, 2 Way: 55/45. | € 522.84 |
![]() | NISMO GT LSD Pro (Differentials) -38420-RSS15-C5 | |
| Selective intial torque (3 settings). Cam angle (Drive/Coast degrees) - 1.5 Way: 55/1, 2 Way: 55/45. | € 627.40 |
![]() | NISMO GT LSD Pro TT-model (Differentials) -38420-RSS17-C5 | |
| Time Trial model. Cam angle (Drive/Coast degrees) - 1.5 Way: 45/1, 2 Way: 45/45. | DISCONTINUED |
![]() | CUSCO Super Lightweight Chromoly Flywheel (Flywheels) -220 023 CA | |
| DISCONTINUED |
![]() | JUN Light Weight Flywheel (STD) (Flywheels) -2001M-N009 | |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | € 240.50 |
![]() | JUN Light Weight Ultralight Flywheel (HS) (Flywheels) -2010M-N009 | |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | € 209.13 |
![]() | TODA Ultra Light Weight CrMo Flywheel (Flywheels) -22100-CA1-800 | |
| Lightweight chromoly steel flywheel. | € 212.21 |
![]() | NISMO Competition Oil (Oils (Drivetrain)) -KLD75-RS411 x 6 | |
| € 178.26 |
![]() | NISMO LSD Oil (Oils (Drivetrain)) -KLD80-RN911 x 6 | |
| € 71.04 |
![]() | HKS Shift Return Spring Kit (Other) -27006-AN001 | |
| Set of 2 x inner spring, 2 x soft spring, 2 x hard spring and 2 x plug. 4 stiffness combinations (150%, 210%, 300%, 350% compared to standard). | DISCONTINUED |
![]() | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -220 311 A28 | |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | € 145.90 |
![]() | CUSCO BCS More Info (Brake Cylinder Stoppers) -220 561 A | |
| Brake cylinder stopper (BCS). Suppresses bulkhead deflection that occurs when applying brakes by reinforcing the brake master cylinder. Provides for more direct braking feel. For right hand drive models. | € 39.67 |
![]() | Garage Vary Universal Brake Duct Spoiler (Brake Ducts and Ducting) -30-4002 | |
| Universal brake duct cooling air guides. Require modifications for fitting. | € 67.23 |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | € 21.53 |
![]() | DIXCEL HD Disc Rotor (Brake Rotors) -HD 321 2007 | |
| Heated Disc Rotor. Pair of 2. | € 141.84 |
![]() | DIXCEL HS Disc Rotor (Brake Rotors) -HS 321 2007 | |
| Heated Slit Disc Rotor. Pair of 2. | € 200.89 |
![]() | DIXCEL PD Disc Rotor (Brake Rotors) -PD 321 2007 | |
| Standard type, plain disc rotor with enhance corrosion resistance (rust prevention). High quality but reasonably priced, ideal for those who want a little more performance than standard disc rotors. Pair of 2. | € 98.79 |
![]() | DIXCEL SD Disc Rotor (Brake Rotors) -SD 321 2007 | |
| Slit type disc rotor. 20% improved braking performance for greater stability. Pair of 2. | € 154.64 |
![]() | Kazama Member Bush Rigid Collar (Bushes and Collars) -(GL)SHBUKAZNIS01 | |
|   | € 67.41 |
![]() | KSP Engineering ATTAIN Rear Member Rigid Collar (Bushes and Collars) -KS-610 | |
| Aluminium rear member collars. | € 69.51 |
![]() | NISMO Rear Suspension Mount Bush Kit (Bushes and Collars) -55400-RS590 | |
| Rear subframe bush set. | € 105.18 |
![]() | SunLine Racing Rear Member Collar (Bushes and Collars) -(GL)SHBUSULNIS03 | |
|   | € 80.58 |
![]() | SunLine Racing Rear Member Rigid Adapter (Bushes and Collars) -(GL)SHBUSULNIS01 | |
| € 108.26 |
![]() | TOMEI SSB (Bushes and Collars) -681001 | |
| Sports steering bush. Replacement for standard bushes that have deteriorated over time and to improve the rigidity of the steering system. | € 89.80 |
![]() | URAS Pineapple (Bushes and Collars) -(GL)SHBUS1301 | |
| € 65.39 |
![]() | URAS Super Pineapple (Bushes and Collars) -(GL)SHBUS1302 | |
| € 78.24 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | |
| Performance damper unit only. | DISCONTINUED |
![]() | CUSCO Pillar Side Bar (Chassis Bars) -221 495 A | |
| € 126.22 |
![]() | CUSCO Tension Rod Bar (Chassis Bars) -220 485 A | |
| Made from 22mm steel pipe that enhances chassis stiffness, rigidity and stabilizes alignment. More effective when used with the Cusco Pillowball Tension Rod kit (Sold separately), where further stability can be achieved when the vehicle is under extreme drag/dive (acceleration/braking). | € 45.03 |
![]() | Do Luck Rear Cross Bar (Chassis Bars) -90010 | |
|   | € 204.21 |
![]() | NAGISA Auto Gachiri Support (Chassis Bars) -0001S13 | |
| Inner fender braces. Patent approved, 3D CAD designed. Steel. | € 128.80 |
![]() | NAGISA Auto Shyakitt Brace (Chassis Bars) -0002S13 | |
| Front strut tower and bulkhead braces. | € 121.73 |
![]() | NEXT Butterfly Bar (Chassis Bars) -(GL)SUCBNX180SX04 | |
| € 225.31 |
![]() | NEXT Miracle Cross Bar (Chassis Bars) -(GL)SUCBNX180SX01 | |
| € 480.39 |
![]() | NEXT Option Part Set (Chassis Bars) -(GL)SUCBNX180SX03 | |
| € 412.61 |
![]() | NEXT Paralell Bar (Chassis Bars) -(GL)SUCBNX180SX05 | |
| € 121.97 |
![]() | NISMO Power Brace System 2 (Chassis Bars) -54480-RSS30 | |
| The left and right brackets have been molded with the bar to create a box reinforcement. This structure provides greater chassis and steering rigidity, which improves steering response and makes driving more stable. It also prevents the changes in alignment that can come from lack of rigidity in high-load situations such as circuit racing. The tension rod brackets which form the base of the structure have the same shape as the standard parts, so the installation points are still the same. It can be used with NISMO tension rods or pillow-type tension rods from other manufacturers (for maximum effectiveness, use together with the NISMO suspension link set series). | € 188.22 |
![]() | URAS Nomu No Hokubune (Chassis Bars) -(GL)SUCBURAS1301 | |
|   | € 73.20 |
![]() | URAS Tokujaws (Rear Cross Bar) (Chassis Bars) -(GL)SHCBURSIL01 | |
| DISCONTINUED |
![]() | Apex APEXi N1 Evolution Damper (Coilover Kits) -266AN006 | |
| The N1 Evolution is the newest generation of the track engineered flag ship N1 suspension. All N1 dampers feature large piston, monotube design using a threaded base for height adjustments without compromising shock or spring travel. Features: - 25-Way damping force adjustment to adapt to a variety of driving conditions. - Monotube design with 46mm. diameter piston. - Adjustable lower case design that allows ride height to be adjusted without affecting preload. - Standardized 65mm. (ID) spring allows the use of a wide variety of readily available springs. - Front strut- type setups include camber adjustment plates that utilize premium quality pillow-ball spherical bearings to minimize deflection, binding, and noise. - GT race quality damper fluid that can withstand high temperatures and prevent damping force degradation. - 100% Made in Japan, with precision Japanese components. | € 1966.14 |
![]() | Blitz Damper ZZ-R (Coilover Kits) -92419 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | € 774.04 |
![]() | Blitz Damper ZZ-R Spec DSC PLUS (Coilover Kits) -98419 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with (up to) 96 levels of electronically controlled damper adjustment. Equipped with G sensor and new motors. | € 1230.96 |
![]() | CUSCO Zero-2R (Coilover Kits) -SHCOCSS13001 | |
| DISCONTINUED |
![]() | GP Sports G-MASTER Pros Suspension Kit (Coilover Kits) -503101 | |
| DG-5 collaboration model for circuit use. | DISCONTINUED |
![]() | GP Sports G-MASTER Suspension Kit (Coilover Kits) -501101S | |
| DISCONTINUED |
![]() | HKS HIPERMAX D' (Coilover Kits) -80015-AN003 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX D' NOB Spec (Coilover Kits) -80015-AN101 | |
| Full set. Developed with Nobiteru Taniguchi (D1 Champion and development driver). | € 1370.20 |
![]() | HKS HIPERMAX D' NOB Spec (Old Version) (Coilover Kits) -80015-AN005 | |
| Full set. Developed with Nobiteru Taniguchi (D1 Champion and development driver). | DISCONTINUED |
![]() | HKS HIPERMAX Drag (Coilover Kits) -80040-AN011 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX II (Coilover Kits) -1760-SN003 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX III (Coilover Kits) -80140-AN001 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX Performer (Coilover Kits) -80090-AN003 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX Pro (Coilover Kits) -1750-SN003 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX Pro Pfr (Coilover Kits) -80100-AN003 | |
| Full set. | DISCONTINUED |
![]() | JIC Magic FLT-2 (Coilover Kits) -F2PRS13 | |
| € 991.07 |
![]() | JIC Magic FLT-A2 (Coilover Kits) -A2PRS13 | |
| Adjustable height. 15 way adjustable damper. | DISCONTINUED |
![]() | JIC Magic FLT-FAS (Coilover Kits) -FSPRS13 | |
| Twin tube. Adjustable height. 10 way adjustable damper. | € 700.29 |
![]() | JIC Magic FLT-TAR (Coilover Kits) -A2PRS13 | |
| Adjustable height. 15 way adjustable damper. | € 791.63 |
![]() | JIC Magic SA-1 (Coilover Kits) -SAPRS13 | |
| Adjustable height. 5 way adjustable damper. | € 852.53 |
![]() | TANABE SUSTEC PRO FIVE (Coilover Kits) -FVS13K | |
| Low Down. Suitable for use with TANABE TEAS. | DISCONTINUED |
![]() | TANABE TEAS (Coilover Kits) - | |
| TANABE Electric Active Suspension. | DISCONTINUED |
![]() | TEIN EDFC (Coilover Kits) -EDK04-K4469 + EDK05-12140 + EDK06-K4474 | |
| Electronic Damper Force Controller. For use with TEIN suspension compatible with EDFC. | DISCONTINUED |
![]() | TEIN EDFC 5 (Coilover Kits) -EDK04-R6655 + EDK05-12140 + EDK06-K4474 | |
| Automatic and flexible adjustment with new Jerk-Reactive control for enhanced driving experience. EDFC5 utilizes jerk-reactive adjustment feature, which is developed as a part of industry-academia collaboration with Prof. Dai Watanabe of Shibaura Institute of Technology, successfully combining both sharp handling and comfortable ride, to automatically provide most desirable driving behavior for all drivers. AI (learning function) helps to realize suitable driving feel, without sense of discomfort, for all sorts of situations. In addition, EDFC5 employs new approach to control motors to reduce operating sound, to maintain quietness like original parts/components. Controller screen uses VA panel, as opposed to HTN panel used in previous models, for better looking and easy-to-read display. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | € 523.11 |
![]() | TEIN EDFC 5 and GPS Kit (Coilover Kits) -EDK04-R6655 + EDK05-12140 + EDK06-K4474 + EDK07-P8022 | |
| Automatic and flexible adjustment with new Jerk-Reactive control for enhanced driving experience. EDFC5 utilizes jerk-reactive adjustment feature, which is developed as a part of industry-academia collaboration with Prof. Dai Watanabe of Shibaura Institute of Technology, successfully combining both sharp handling and comfortable ride, to automatically provide most desirable driving behavior for all drivers. AI (learning function) helps to realize suitable driving feel, without sense of discomfort, for all sorts of situations. In addition, EDFC5 employs new approach to control motors to reduce operating sound, to maintain quietness like original parts/components. Controller screen uses VA panel, as opposed to HTN panel used in previous models, for better looking and easy-to-read display. GPS kit allows longitudinal and lateral G-actuated and speed-sensitive automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | € 585.85 |
![]() | TEIN EDFC Active (Coilover Kits) -EDK04-P8021 + EDK05-12140 + EDK06-K4474 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal G-actuated automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN EDFC Active and GPS Kit (Coilover Kits) -EDK04-P8021 + EDK05-12140 + EDK06-K4474 + EDK07-P8022 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor and optional GPS kit allows longitudinal G-actuated and speed-sensitive automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN EDFC Active PRO and GPS Kit (Coilover Kits) -EDK04-Q0349 + EDK05-12140 + EDK06-K4474 + EDK07-P8022 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor and optional GPS kit allows longitudinal and lateral G-actuated and speed-sensitive automatic adjustment of damping force while driving. PRO features: individual adjustment of 4 shock absorbers, vehicle speed pulse input and 2 additional input ports. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | € 465.60 |
![]() | TEIN EDFC ActivePRO (Coilover Kits) -EDK04-Q0349 + EDK05-12140 + EDK06-K4474 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal and lateral G-actuated automatic adjustment of damping force while driving. PRO features: individual adjustment of 4 shock absorbers, vehicle speed pulse input and 2 additional input ports. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | € 418.54 |
![]() | TEIN EDFC II (Coilover Kits) -EDK04-P9669 + EDK05-12140 + EDK06-K4474 | |
| Electronic Damper Force Controller II. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN FLEX Z (Coilover Kits) -VSN20-C1SS4 | |
| Full-spec high-quality damper at a smashing low price. Twin tube. Full length and damping force adjustable. | € 836.56 |
![]() | TEIN MONO FLEX (Coilover Kits) -GSN20-F1SS1 | |
| DISCONTINUED |
![]() | TEIN MONO RACING (Coilover Kits) -VSN20-K1LS4 | |
| Sports shock absorber with customizable settings, reflecting customer feedback on TEIN's flagship products. Mono tube. Full length and damping force adjustable. MONO RACING is developed to satisfy the drivers who frequently take their cars for a spin at the race tracks. Based on the settings of the high-end model SUPER RACING and on a wealth of data gained through participation in various motorsports, spring rates and damping force for MONO RACING are determined to be most suitable for sports driving. | € 1448.65 |
![]() | TEIN MONO Sport (Coilover Kits) -GSN20-71SS4 | |
| € 1312.89 |
![]() | TEIN Super Drift (Coilover Kits) -GSN20-D1SS1 | |
| DISCONTINUED |
![]() | TEIN Super Street (Coilover Kits) -GSN20-A1SS2 | |
| DISCONTINUED |
![]() | TEIN Type FLEX (Coilover Kits) -DSN20-71SS2 | |
| DISCONTINUED |
![]() | TEIN Type HE (Coilover Kits) -SHCOTES13002 | |
| DISCONTINUED |
![]() | GT-1 Motorsports Rear Side Wire Kit (Other) -BR-0005 | |
| For use with vehicles with hand brake (side brake) converted to inner drum type (Nissan HCR32 or ECR33 types only). Not suitable for Z32, GTS-4 or GT-R type inner drums. | € 126.09 |
![]() | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | |
|   | € 12.30 |
![]() | PROVA Resevoir Tank Cover (Other) -90000JL0200 | |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
![]() | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | |
| Mechanical lifter kit. | € 2034.44 |
![]() | TOMEI HICAS Lock (Other) -56000S210 | |
| € 60.34 |
![]() | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | € 16.73 |
![]() | BORDER HICAS Rod (Rods and Control Arms) -SU.RT.N1 | |
| € 198.68 |
![]() | BORDER Pillowball Tension Rods (Rods and Control Arms) -SU.PT.Z32-2 | |
| € 182.99 |
![]() | CUSCO Adjustable Rear Upper Arms (Rods and Control Arms) -220 474 L | |
| € 157.47 |
![]() | CUSCO Adjustable Rear Upper Arms - For Drift (Rods and Control Arms) -223 474 LD | |
| € 172.23 |
![]() | CUSCO Adjustable Toe Control Rods (Rods and Control Arms) -220 474 E | |
| € 142.70 |
![]() | CUSCO Adjustable Toe Control Rods - For Drift (Rods and Control Arms) -223 474 ED | |
| Rear Toe Control Arms - For Drift. | € 180.35 |
![]() | CUSCO Drift Angle Kit (Rods and Control Arms) -223 463 F | |
| Lightweight, high strength billet aluminum uprights and high strength arms. Similar to the upright used on GT race cars, the shim adjustment mechanism is so settings are easily reproducable. By using pillow balls for each part, alignment change is suppressed and high controllability and quick movement is achieved. Competition use. | € 1829.92 |
![]() | CUSCO Pillow Ball Tension Rods (Rods and Control Arms) -220 473 AS | |
| Castor rods. | € 155.74 |
![]() | IKEYA FORMULA Adjuster Rear Lower Arm (Rods and Control Arms) -IFAO16001 | |
|   | € 461.63 |
![]() | IKEYA FORMULA Rear Camber Adjuster Upper Arms (Rods and Control Arms) -IFAG08001 | |
| € 276.61 |
![]() | IKEYA FORMULA Rear Toe Adjust Rods (Rods and Control Arms) -IFAH09001 | |
|   | € 172.41 |
![]() | IKEYA FORMULA Roll Center Adjuster Pillow Lower Arm Kit (Rods and Control Arms) -IFAF07011 | |
| Lower arm and pillowball tension rod kit. | € 596.03 |
![]() | IKEYA FORMULA Tension Rods (Rods and Control Arms) -IFAD05001 | |
| € 252.44 |
![]() | IKEYA FORMULA Tie Rod Ends (Rods and Control Arms) -IFAN15001 | |
|   | € 202.98 |
![]() | IKEYA FORMULA Tie Rod Kit (Rods and Control Arms) -IFAF05001 | |
| Tie rods and tie rod ends. | € 244.26 |
![]() | IKEYA FORMULA Tie Rods (Rods and Control Arms) -IFAC04001 | |
|   | € 94.29 |
![]() | IKEYA FORMULA Traction Adjuster Rods (Rods and Control Arms) -IFAM14001 | |
| € 178.44 |
![]() | JIC Magic Performance T Rod (Rods and Control Arms) -PTRS13 | |
|   | € 96.63 |
![]() | JIC Magic Pillow Tension Rods (Rods and Control Arms) -PTS13AJ | |
| Castor rods. | € 165.65 |
![]() | JIC Magic Traction Rods (Rods and Control Arms) -TRAS13B | |
| DISCONTINUED |
![]() | Kazama Pillowball Tension Rods (Rods and Control Arms) -01401101 | |
| DISCONTINUED |
![]() | Kazama Super Tie Rod Ends (Rods and Control Arms) -(GL)SHRCKAS14A02 | |
| DISCONTINUED |
![]() | Kazama Super Tie Rods (Rods and Control Arms) -01404101 | |
| Heavy duty item which alleviates bending or breakage experienced by the standard tie rods. Spinning with steering at full lock while drifting, causes heavy load on the tie rod, and the probability of damage will increase. The screw part has the same degree of accuracy as normal, with full compatibility with tie rod end. | € 96.63 |
![]() | ORIGIN Front High Angle Pillow Tension Rod (Rods and Control Arms) -FW-FTER-N0001-SET | |
| Castor adjustment rod. | € 119.94 |
![]() | ORIGIN Front High Angle Pillow Tension Rod (Offset Design) (Rods and Control Arms) -FW-FTER-N0003-SET | |
| Castor adjustment rod. | € 132.86 |
![]() | ORIGIN Front Lower Arm with Tension Rod (Rods and Control Arms) -FW-FLA-N0001-SET | |
| € 449.33 |
![]() | ORIGIN Front Lower Arm with Tension Rod Ver 2 (Rods and Control Arms) -FW-FLA-N0005-SET | |
| Revised tension rod attachment point, reducing inteference with wheel at extreme steering angles. | € 462.25 |
![]() | ORIGIN Pillow Rear Toe Control Rod (Rods and Control Arms) -FW-RTCA-N0002-SET | |
| For correction of toe angle, caused by changes to vehicle ride height. | € 107.03 |
![]() | ORIGIN Pillow Rear Traction Rod (Rods and Control Arms) -FW-RTR-N0001-SET | |
| Suppresses toe change, stabilising the behaviour of the rear end. | € 107.03 |
![]() | ORIGIN Pillow Rear Upper Arm (Rods and Control Arms) -FW-RUA-N0001-SET | |
| Camber adjustement arm. | € 139.32 |
| ORIGIN Silicone Tie Rod Boot (Rods and Control Arms) -FW-FSB-N0001-SET | ||
| Silicone heavy duty tie rod boots. | € 58.59 |
![]() | ORIGIN Tie Rod (Heavy Duty Adjustable) (Rods and Control Arms) -FW-FTR-N0001-SET | |
| € 86.05 |
![]() | ORIGIN Tie Rod End (High Angle Type) (Rods and Control Arms) -FW-FTRE-N0001-SET | |
| Highly moveable, small diameter ball joint suitable for vehicles with high steering angle. | € 65.05 |
![]() | SILK ROAD Front Tension Rods (Rods and Control Arms) -2AG-G08 | |
| € 125.48 |
![]() | SILK ROAD HICAS Canceller (Rods and Control Arms) -2AU-I04 | |
| € 94.11 |
![]() | SILK ROAD HICAS Canceller Return Pipe (Rods and Control Arms) -(GL)2AU-I04-RP | |
| DISCONTINUED |
![]() | SILK ROAD Rear Toe Rods (Rods and Control Arms) -2AG-G03 | |
| € 146.39 |
![]() | SILK ROAD Rear Upper Arms (Rods and Control Arms) -2AGJ-G02 | |
| € 167.31 |
![]() | SILK ROAD Rear Upper Links (Rods and Control Arms) -2AG-G01 | |
| € 130.71 |
![]() | TEIN Pillowball Tension Rods (Rods and Control Arms) -PTN20-11S00 | |
| Castor rods. | DISCONTINUED |
![]() | TEIN Tie Rod Ends (Rods and Control Arms) -TRS01-NS2020 | |
| € 69.04 |
![]() | TEIN Tie Rods (Rods and Control Arms) -TRS01-NS2010 | |
| € 71.97 |
![]() | URAS Futokusuru (Rods and Control Arms) -0105002-Nissan | |
| Heavy duty tie rod adapter. Prevents pending of tie rods (even heavy duty types). Strengthens the screw part of tie rods, often the wek point of even aftermarket heavy duty tie rods. Length: 100mm, thickness: 25mm, thread pitch: M14 x 1.5. | € 47.98 |
![]() | URAS Happy End (Rods and Control Arms) -0105002 | |
| Inverse joint type heavy duty tie rod ends. For use with M14 x 1.5 tie rods or M12 x 1.25 Taper Knuckle. | € 76.89 |
![]() | URAS Super Strengthened Tie Rods (Rods and Control Arms) -(GL)SHRAURS1301 | |
| Strengthened and increased steering angle. | € 85.50 |
![]() | URAS Tie Rod Extension (Rods and Control Arms) -01060 | |
| "Tsukitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | € 52.71 |
![]() | URAS Tie Rod Extension (Short) (Rods and Control Arms) -0105001 | |
| "Cyoitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | DISCONTINUED |
![]() | CUSCO Strut Tower Bar Type 40 (Strut Tower Bars) -220 526 A | |
| 40mm Aluminium shaft. Center Bar: Engineered inside and out, the stylish 40mm cross section made of lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex. Brackets: The aluminum end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | € 91.16 |
![]() | CUSCO Strut Tower Bar Type AS (Strut Tower Bars) -220 510 A | |
| Aluminum Circular Shaft. Center Bar: The most simple and lightweight aluminum shaft bar made hollow for lightweight and rigid characteristics. Brackets: The steel end plate brakets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. | € 61.45 |
![]() | CUSCO Strut Tower Bar Type CB (Strut Tower Bars) -220 551 A | |
| 40mm Carbon Fiber. Center Bar: The most lightweight and rigid strut bar available, made from 100% layered carbon fiber for extreme lightness and unmatched strength. Brackets: The steel end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | € 109.61 |
![]() | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -220 535 A | |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | € 77.32 |
![]() | CUSCO Strut Tower Bar Type OS-T (Strut Tower Bars) -220 544 A | |
| V style 3 point brace. Third Point Add-On Bar. Bolt-on a third point to pre-existing Cusco strut tower bars (sold separately) for added rigidity, direct contact with the chassis. Bars: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Fitment: Applies to Type 40, Type CB, Type OS, and Type AS Cusco rear strut tower bars. | € 63.48 |
![]() | CUSCO Pillow Ball Upper Mounts (Upper Mounts) -220 410 S | |
| These upper mounts replace the flimsy factory rubber for a more solid and direct road surface input to the driver as well as keeping alignment specs to the static position during hard cornering. The solid state of the mounts translates the road irregularities to be fully absorbed by the suspension rather than rubber components. This enables improved steering control of the vehicle. CUSCO offers several types of mounts, (camber adjust, fixed, center lock, gravel spec) depending on your vehicle application. All mounts use 6mm thick 2017S duralumin plates. Made to cater to many different types of shock absorbers with a full line of custom pillow nuts and collars. Sold in pairs (Left and right). | € 126.22 |
![]() | HKS 2 Way Pillow Ball Upper Mounts (Upper Mounts) -82001-AN001 | |
| € 250.96 |
![]() | HKS Pillow Ball Upper Mounts (Upper Mounts) -1712-RN003 | |
| DISCONTINUED |
![]() | TEIN Pillow Ball Upper Mounts More Info (Upper Mounts) -PAN20-31PFR | |
| Eliminates compliance, for sharper and more direct steering feel. TEIN's pillow ball (spherical bearing) upper mounts are designed specifically for each individual vehicle model. By retaining upper spring and shock absorber position close to standard, TEIN's pillow ball upper mounts keep height change to the minimum and stroke center is maintained. Rubber bushes are replaced with a pillow ball bearings which eliminates the load input compliance, reduces the change of alignment to improve the grip of the tire. *NMB pillow ball bearings are used. Ultra duralumin A2017S-T4 (aircraft grade) is used for upper seats and adjusting plates with anodized aluminum to have maximum strength and durability. High tension material S45C is used for serration bolts. Long bolt design, allows easy mounting and gives enough thread for strut tower bars to be fitted. | € 165.15 |
![]() | KSP Engineering Attain 5 Stud Hub Set (Wheel Hubs/Knuckles) -KS-740 | |
| 4 stud to 5 stud conversion hubs. Pair (Left and right). | € 275.56 |
![]() | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | |
| Inconel 625 complexe alloy steel wheel nuts. | € 32.23 |
![]() | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | € 65.57 |
![]() | NISMO Racing Nut (Wheel Nuts) -40220-RN910 | |
| Lightweight wheel nuts. Made from perforated chromoly steel, these nuts are resistant to heat expansion and super light. Even in extreme racing conditions where heat from the brakes can push the temperature of the nuts to over 120°C, these nuts will hold and not come loose (A problem often found with aluminium/duralumin nuts). The NISMO logo is laser engraved on the nut shaft. Set of 4. Chromoly steel (SCM 435). | € 14.39 |
![]() | NISMO Wheel Nut Set (Wheel Nuts) -40220-RN810 (Old: 40220-RN800) | |
| Made from reliable steel, won't loosen even in the extremely high temperatures of all out racing conditions. Made to a smaller diameter, these nuts were designed to be used for wheels with small nut holes, while reducing weight. Ball seat lug type design helps to keep dirt and moisture out. Being 7 sided, they are effective as a simple anti theft device. Set of 20 wheel nuts and wheel nut adapter. | € 62.13 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | € 81.56 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | € 111.95 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | € 134.15 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | € 110.78 |
![]() | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | |
| € 171.77 |
![]() | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | |
| DISCONTINUED |
![]() | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | € 27.16 |
![]() | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | |
| Chrome molybdenum steel (SCM435) wheel bolts. | € 31.89 |
![]() | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | € 35.00 |
![]() | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | € 27.25 |
![]() | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | € 49.95 |
![]() | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | |
| € 90.42 |
![]() | KSP Engineering Attain Wide Tread Spacer Regular Type (Wheel Spacers) -KS-3531 | |
| R Type. Includes hub centres. Set of two. | € 120.25 |
![]() | SUPER NOW 4 to 5 Hole Conversion Spacer (Wheel Spacers) -(GL)SHWSSNWGEN01 | |
| For 4H/PCD114.3 vehicles only. 27mm thick. Set of 2. | € 103.64 |
![]() | NISMO Long Hub Bolts (Wheel Studs) -40222-RS010 | |
| Material: SCM435 (chrome-molybdenum steel). Surface finish: ZAC-2 (grey)/quenching. Hardness: greater than HRC48. Tempering hardness: HRC26 to 34. | € 29.22 |
![]() | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | |
| € 27.80 |
![]() | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | |
| € 26.82 |
![]() | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | |
| € 37.64 |
![]() | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | |
| Spring type rear hatch/boot lid hooks. | € 29.83 |
![]() | SILK ROAD SECTION Sports Diffuser (Diffusers (Front)) -2AG-O20 | |
| € 301.40 |
![]() | D.Speed Front Combi Lens (Lights (Head, Tail, Indicator)) -(GL)ETHL-DSP-180SX-11 | |
| € 49.27 |
![]() | D.Speed Front Turn Lens (Lights (Head, Tail, Indicator)) -(GL)ETHL-DSP-180SX-01 | |
| € 118.16 |
![]() | D.Speed Side Turn Lens (Lights (Head, Tail, Indicator)) -(GL)ETHL-DSP-180SX-02 | |
| € 72.03 |
![]() | BOMEX Aero Mirror (Mirrors and Mirror Covers) -S13-AM-02FE | |
| Manual adjustment type FRP aero mirrors for weight reduction in aero dynamic form. Unpainted. Pair (Left and right). Requires rivet removal if dismantling before painting. | € 308.78 |
![]() | Garage Vary Universal Turbulator (Other) -30-4001 | |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | € 67.41 |
![]() | KENSTYLE Accent Screws (Other) -(GL)AS01 | |
| Universal dress up accent screws. Ideal for completing the wide fender look. | € 27.06 |
![]() | SARD GT Wing 014 More Info (Spoilers/Wings) -61553-1400 | |
| Universal carbon GT wing with swan neck style stays. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | € 1085.65 |
![]() | SARD GT Wing 015 More Info (Spoilers/Wings) -61556-1610-Type1 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | € 1202.52 |
![]() | NISMO Blank Key (Blank Keys) -KEY01-RN008 | |
| DISCONTINUED |
![]() | CUSCO Offset Number Stay (Exterior Parts) -220 550 L | |
| Bracket for offsetting number plate. | € 21.19 |
![]() | ORIGIN Front EX Canard (Exterior Parts) -W037-SET-carbon | |
| Universal. Pair (Left and right). | € 97.19 |
![]() | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET-carbon | |
| Universal. Pair (Left and right). | € 190.99 |
![]() | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | |
| Universal. Pair (Left and right). | € 127.02 |
![]() | SARD Aero Blade (Exterior Parts) -61967 | |
| Sold individually (1 piece). | € 19.84 |
![]() | SARD Front Bumper Canard (Exterior Parts) -61965 | |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
![]() | SARD Front Under Flap (Exterior Parts) -61966 | |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
![]() | Super Made 180SX Fixed Light Set (Exterior Parts) -(GL)OTEPSM18001 | |
| € 412.61 |
![]() | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | € 37.77 |
![]() | URAS Crystal Position Lens (Exterior Parts) -01116-1 | |
| Pair (Left and right). | DISCONTINUED |
![]() | URAS Crystal Side Winker (Exterior Parts) -01116-2 | |
| Crystal side indicators. Pair (Left and right). | DISCONTINUED |
![]() | URAS Crystal Winker (Exterior Parts) -01116-3 | |
| Crystal indicators. Pair (Left and right). | € 42.44 |
![]() | URAS Euro Tail Lamp (Exterior Parts) -(GL)OTEPURS13H01 | |
| DISCONTINUED |
![]() | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | |
| € 212.58 |
![]() | NISMO Fuel Filler Cap (Fuel Filler Caps) -17251-RN010 | |
| Discontinued. | DISCONTINUED |
![]() | NISMO Fuel Filler Cap (Version 2) (Fuel Filler Caps) -17251-RN011 | |
| Discontinued. | DISCONTINUED |
![]() | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | |
| Gas/Petrol cap cover. | DISCONTINUED |
![]() | Blitz i-Burner Expansion Kit (Globes) -14566 | |
| DISCONTINUED |
![]() | Blitz i-Burner Spark Lights (Globes) -14565 | |
| DISCONTINUED |
![]() | Craft Square Attachment Plates (Mirrors) -(GL)OTMRCFS1301 | |
| Attachment plates for installation of TCA-N1/TCA-F. | DISCONTINUED |
![]() | Craft Square TCA-F (Mirrors) -(GL)OTMRCFSTCAGEN02 | |
| Touring Competition Mirror. Lightweight, rigid mirrors made from carbon composite. The locking mechanism provides reliability in motorsports applications and on the street. | DISCONTINUED |
![]() | Craft Square TCA-N1 (Mirrors) -(GL)OTMRCFSTCAGEN01 | |
| Touring Competition Mirror. Lightweight, rigid mirrors made from carbon composite. The locking mechanism provides reliability in motorsports applications and on the street. | DISCONTINUED |
![]() | Ganador LED Super Mirror (Mirrors) -LM-04PCL | |
| DISCONTINUED |
![]() | Ganador Super Mirror (Mirrors) -SM-04PCL | |
| DISCONTINUED |
![]() | HKS Billet Oil Filler Cap (Oil Filler Caps) -24003-AN001 | |
| Duralumin. | € 49.95 |
![]() | NISMO Oil Filler Cap (Oil Filler Caps) -15255-RN014 | |
| Aluminium (billet). NISMO logo. Includes heat resistant rubber O-ring. M32x3.5mm. | € 58.74 |
![]() | NISMO Oil Filler Cap (Old) (Oil Filler Caps) -15255-RN012 | |
| Aluminium (billet). NISMO logo, "Nissan Motorsports International" text. Includes heat resistant rubber O-ring. M32x3.5mm. Discontinued. | DISCONTINUED |
![]() | NISMO Oil Filler Cap (Ratchet Type) (Oil Filler Caps) -15255-RN015 (Old: 15255-RN013) | |
| Aluminium Die Cast (OEM cap portion resin). NISMO logo. | € 38.38 |
![]() | TOMEI Oil Filler Cap (Oil Filler Caps) -763006 | |
| € 46.87 |
![]() | TRUST GReddy Oil Filler Cap (Oil Filler Caps) -13921021 / 13921011 | |
| Chrome or chrome blue. | DISCONTINUED |
![]() | TRUST GReddy Oil Filler Cap B-Type More Info (Oil Filler Caps) -13901502 GOC-B02 | |
| Machined from aluminum. Comes with a special tool that is convenient when the cap is hot or when the cap is difficult to remove. Includes O ring/seal. | € 44.66 |
![]() | GP Sports Quick Lifter (Other) -(GL)OTOTGPSS1301 | |
| Easy jack up assist system. | DISCONTINUED |
![]() | TRUST GReddy Cable Ties (Other) -18001742 | |
| GReddy logo cable ties. | € 13.85 |
![]() | HKS Emblem (Stickers and Emblems) -51003-AK027 | |
| Silver. 87 x 35mm. | DISCONTINUED |
![]() | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | € 15.38 |
![]() | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | |
| ABS resin emblem of Tuned by HKS. Size:115mm x 19mm. | € 27.56 |
![]() | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | € 12.06 |
![]() | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | € 12.06 |
![]() | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | € 12.06 |
![]() | HKS Sticker - Metal Logo (Stickers and Emblems) -51003-AK231 | |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | € 12.06 |
![]() | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | € 12.06 |
![]() | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | |
| HKS logo on oil color. | € 12.06 |
![]() | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | |
| Tuned by HKS sticker. Hairline finish. | € 12.06 |
![]() | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | € 12.06 |
![]() | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | |
| Small-sized transcription sticker. | € 12.06 |
![]() | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | |
| ABS plastic emblem with chrome (mekki) finish. | € 23.00 |
![]() | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | |
| High brightness reflective sheet. | € 24.17 |
![]() | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
![]() | NISMO Emblem (Stickers and Emblems) -99993-RN209 | |
| € 8.92 |
![]() | NISMO NISMO Logo Sticker (Stickers and Emblems) -99992-RN225 | |
| € 8.37 |
![]() | NISMO NISMO Logo Sticker Set (Stickers and Emblems) -99992-RN237 | |
| € 7.84 |
![]() | NISMO NISMO URL Sticker Set (Stickers and Emblems) -99992-RN043 | |
| € 16.79 |
![]() | NISMO S-tune Sticker Set (Stickers and Emblems) -99992-RN242 | |
| € 12.73 |
![]() | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | € 8.73 |
![]() | TOMEI 70 Sticker (Stickers and Emblems) -761031 | |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | € 9.53 |
![]() | TOMEI Emblem (Stickers and Emblems) -763000 | |
| 120 x 22mm. | € 17.84 |
![]() | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
![]() | Top Fuel Emblem (Stickers and Emblems) -26735831 | |
| Metal plate emblem with engraved Top Fuel logo. | € 11.99 |
![]() | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | |
|   | € 31.68 |
![]() | Blitz Towing Strap (Tow Hooks/Straps) -13890 | |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | € 19.84 |
![]() | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | € 32.29 |
![]() | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | |
| € 40.07 |
![]() | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | € 39.43 |
![]() | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | € 26.51 |
![]() | NISMO Air Valve Cap Set (Valve Caps) -99927-RN302 (Old: 99927-RN301) | |
| Air valve caps with NISMO logo on their head, protected by a clear glass finish. Aluminium (Black alumite finish). Set of 4. 7.7mm x 0.794mm (thread x pitch). | € 18.88 |
![]() | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC15 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | € 12.82 |
![]() | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | € 26.94 |
![]() | CUSCO Acrylic Windows (Windows) -220 800 A | |
| Designed to shed weight off of race machines. These acrylic windows are direct factory replacement, and weigh a fraction of the standard factory glass. Designed for competition use. | € 731.97 |
![]() | HPI Racing Acrylic Window (Windows) -(GL)OTWNHPIS1318001 | |
| € 806.40 |
![]() | STOUT Acrylic Window (Windows) -(GL)OTWNSTOS1301 | |
| € 874.67 |
Back | Back to TOP