Categories: | |
![]() | Apex APEXi AVC-R (Boost Controllers) -420-A004 | ![]() |
Acutator Valve Controller Type-R. | DISCONTINUED |
![]() | Blitz A/F Box (Boost Controllers) -15063 | ![]() |
Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
![]() | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | ![]() |
High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
![]() | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | ![]() |
High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
![]() | Blitz External Voltage Input Harness (Boost Controllers) -15053 | ![]() |
Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | $36.33 |
![]() | Blitz Press Sensor Set (Boost Controllers) -19211 | ![]() |
Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | $100.91 |
![]() | Blitz Remote Switch (Boost Controllers) -15045 | ![]() |
$29.77 |
![]() | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | ![]() |
Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-Color Spec S (Boost Controllers) -15080 | ![]() |
Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec R (Boost Controllers) -15078 | ![]() |
Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec S (Boost Controllers) -15073 | ![]() |
Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC Type R (Boost Controllers) -15039 | ![]() |
High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S (Boost Controllers) -15040 | ![]() |
High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S PLUS (Boost Controllers) -15044 | ![]() |
High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | $290.61 |
![]() | Blitz SBC-DC (Boost Controllers) -15060 | ![]() |
DISCONTINUED |
![]() | Blitz SBC-iD III (Boost Controllers) -15085 | ![]() |
Twin sequential solenoid. | DISCONTINUED |
![]() | Blitz Temp Sensor Set (Boost Controllers) -19210 | ![]() |
Optional part for use with SBC i-Color. One set per SBC i-Color. | $100.91 |
![]() | Blitz Wireless Remote Switch (Boost Controllers) -15042 | ![]() |
Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
![]() | HKS EVC (Old) (Boost Controllers) -45003-AK001 | ![]() |
4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | ![]() |
4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
![]() | HKS EVC Display Stand (Boost Controllers) -53002-AK001 | ![]() |
For use with display of HKS EVC. | $11.36 |
![]() | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | ![]() |
Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | $113.52 |
![]() | HKS EVC EZ II (Boost Controllers) -45003-AK002 | ![]() |
Discontinued. | DISCONTINUED |
![]() | HKS EVC V (Boost Controllers) -45003-AK005 | ![]() |
5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | ![]() |
Discontinued. | DISCONTINUED |
![]() | HKS EVC VI (Boost Controllers) -45003-AK010 | ![]() |
6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
![]() | HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | ![]() |
DISCONTINUED |
![]() | HKS EVC VI-IR (Boost Controllers) -45003-AK011 | ![]() |
2.2 inch full colour TFT screen. | DISCONTINUED |
![]() | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | ![]() |
2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | $491.92 |
![]() | HKS EVC VII (Boost Controllers) -45003-AK013 | ![]() |
7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | $482.97 |
![]() | HKS EVC-S (Boost Controllers) -45003-AK009 | ![]() |
  | $264.88 |
![]() | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | ![]() |
DISCONTINUED |
![]() | TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | ![]() |
For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | ![]() |
For use of Profec E-01 pressure sensor with e-Manage. | $14.90 |
![]() | TRUST GReddy Profec (Boost Controllers) -15500214 | ![]() |
OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $345.50 |
![]() | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | ![]() |
Can be used in conjunction with Trust e-Manage. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | ![]() |
Repair /service part for Profec (OLED screen). | $12.92 |
![]() | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy Profec White (Boost Controllers) -15500219 | ![]() |
Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
![]() | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | ![]() |
For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
![]() | Apex APEXi AFC Neo (Engine Management) -401-A018 (Old: 401-A017) | ![]() |
Colour Display Airflow Converter. Does not include APEXi General Purpose Stand. | $317.86 |
![]() | Apex APEXi P-NBC (Engine Management) -440-F001 | ![]() |
$511.60 |
![]() | Apex APEXi P-NBC Harness Type-01 (Engine Management) -442-A001 | ![]() |
DISCONTINUED |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | ![]() |
Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz R-FIT (Engine Management) -15120 | ![]() |
Fuel Intensity Tracer. 16 point engine revolution fuel control. | $301.21 |
![]() | FIELD One Touch Connector (Engine Management) -CN-12 | ![]() |
ECU extension harness. Install electronic parts without damaging genuine ECU wiring. | DISCONTINUED |
![]() | HKS F-CON Harness (Engine Management) -4202-RF008 | ![]() |
For use with F-CON SZ, F-CON iS or F-CON V Pro. | $330.97 |
![]() | HKS F-CON SZ (Engine Management) -42011-AK002 | ![]() |
Universal. | $600.39 |
![]() | HKS F-CON V Pro Ver.3.4 + Power Writer Set (Engine Management) -42016-AK002 | ![]() |
For use with vehicles where HKS F-CON Harness (Sold separately) is available. Does not include maps. Requires tuning to suit application vehicle. Startup maps are available for some vehicles. Communications unit is tied to each F-CON V Pro unit (Not suitable for other F-CON V Pro units). Power Writer Software designed for use on computers with Microsoft Windows 7 and later, more than 2GB RAM, More than 1GB of hard disc space, USB port. | $1,715.41 |
![]() | HKS F-CON V Pro Ver.4 + Power Writer Set (Engine Management) -42016-AK001 | ![]() |
For use with vehicles where HKS F-CON Harness (Sold separately) is available. Does not include maps. Requires tuning to suit application vehicle. Startup maps are available for some vehicles. Communications unit is tied to each F-CON V Pro unit (Not suitable for other F-CON V Pro units). Power Writer Software designed for use on computers with Microsoft Windows 7 and later, more than 2GB RAM, More than 1GB of hard disc space, USB port. | DISCONTINUED |
![]() | HKS VALCON Pro (Engine Management) -45011-AF001 | ![]() |
Valtai (Valve Timing) Controller. | DISCONTINUED |
![]() | Power Enterprise CAMCON EX (Engine Management) -CC-EX1-F1 | ![]() |
Cam & AFC & VTEC Controller. | $454.08 |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | ![]() |
For use with Trust GReddy e-Manage - not boost controller. | $412.07 |
![]() | TRUST GReddy e-manage (Engine Management) -15500510 (Old: 15500500) | ![]() |
TRUST Greddy e-manage (Blue). Piggy back engine management system that enables fuel adjustment to effeectively derive power regardless of power, from beginners to high end users. Requires e-manage Harness Kit - Injector and e-manage Harness Kit (Ignition) (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | ![]() |
Option part for use with Trust GReddy e-Manage. | $22.60 |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | ![]() |
Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | $99.29 |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | ![]() |
Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $28.96 |
![]() | TRUST GReddy e-manage Ultimate More Info (Engine Management) -15500501 | ![]() |
Engine Control Unit Manager ULTIMATE. The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. Requires harness kit (vehicle specific harness available for some applications) - Sold separately. | $500.50 |
![]() | TRUST GReddy e-manage Ultimate Exchange Harness (Engine Management) -15901501 | ![]() |
Used to upgrade from e-manage to e-manage Ultimate. | $38.75 |
![]() | TRUST GReddy e-manage Ultimate Injector Adapter 1 (Engine Management) -15901505 | ![]() |
$41.37 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | ![]() |
For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | $104.94 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | ![]() |
For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $36.33 |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit (Engine Management) -15901500 | ![]() |
Universal harness. For applications where no car specific harness is available. 18P, 14P, 12P connectors and wiring set. | $87.18 |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit Type 2 (Engine Management) -15901510 | ![]() |
Universal harness. For applications where no car specific harness is available. With current reverse flow diode. 18P, 14P, 12P connectors and wiring set. | $90.41 |
![]() | TRUST GReddy e-manage Ultimate v-manage Vehicle Specific Harness (Engine Management) -15961503 | ![]() |
Plug and play harness for installation of both e-manage Ultimate and v-manage (Bolt on installation). Includes e-manage Ultimate Injector Adapter 1 (Wired in). Includes v-manage Adapter 1 Dual (Wired in). | $248.23 |
![]() | TRUST GReddy e-manage Ultimate Vehicle Specific Harness (Engine Management) -15921502 | ![]() |
Plug and play harness. | $173.76 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | ![]() |
For use with Trust GReddy e-Manage Ultimate. | $57.92 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | ![]() |
For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $28.96 |
![]() | TRUST GReddy e-manage Vehicle Specific Harness (Engine Management) -15960907 | ![]() |
Plug and play harness. Injector and ignition harnesses not required when using this product with TRUST e-manage. | DISCONTINUED |
![]() | TRUST GReddy Extension Harness More Info (Engine Management) -15911102 | ![]() |
ECU wiring harness extension for splicing in electronic parts, preserving your standard harness. Suitable for GReddy e-manage, GReddy e-manage Ultimate, GReddy v-manage, GReddy f-manage. | DISCONTINUED |
![]() | TRUST GReddy v-manage (Engine Management) -15500551 | ![]() |
Variable Valve Timing Manager. | DISCONTINUED |
![]() | TRUST GReddy v-manage Option Part (Engine Management) -15901607 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy v-manage Vehicle Specific Harness (Engine Management) -15962000 | ![]() |
Plug and play harness for use with TRUST v-manage. | $190.31 |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | ![]() |
Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | ![]() |
Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $249.74 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | ![]() |
Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $242.18 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | ![]() |
Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | ![]() |
DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | ![]() |
DISCONTINUED |
![]() | Bee-R Rev Limiter (Other Controllers) -(GL)ELOTBESUB01 | ![]() |
  | $247.83 |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | ![]() |
Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $178.60 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | ![]() |
Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | ![]() |
VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $33.30 |
![]() | Blitz E-ESC (Other Controllers) -16087 | ![]() |
Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | Do Luck ISC (Other Controllers) -(GL)ENOCDOLIMP01 | ![]() |
Intercooler Spray Controller. | $143.69 |
![]() | HKS SLD (Other Controllers) -4502-RA002 | ![]() |
Speed Limit Defencer. | $110.24 |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | ![]() |
Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | $131.18 |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | ![]() |
$106.96 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | ![]() |
$167.50 |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | ![]() |
Discontinued. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | ![]() |
Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | ![]() |
Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $256.71 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | ![]() |
For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $27.20 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)ELOTYFT01 | ![]() |
DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)ELOTYFT04 | ![]() |
For use with Okachan Water Temp oC. Includes harness. | $33.56 |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)ELOTYFT04 | ![]() |
For use with Okachan Water Temp oC. | $21.09 |
![]() | Apex APEXi Rev/Speed Meter GP (Performance Meters) -405-A012 | ![]() |
The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. This new aesthetically pleasing model was crafted to match the likes of other highly popular APEXi electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of APEXi's line up. The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km/h b 0 times, user defined Mid Range Acceleration, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For acceleration and timing accuracy.), and Vehicle weight input. One of the most exiting of the new features is the option to utilize the revolutionary APEXi G-Sensor (Sold separately.). The G Sensor allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G on the race track, or used in an array of new features including: Highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, Horse Power Calculation, and Loss Power Calculation. By taking advantage of the optional G Sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel-spin. Using the G Sensor modifies the speed sensor signal, compensating for wheel-spin and producing impeccably accurate acceleration times. | $172.55 |
![]() | Apex APEXi Rev/Speed Meter GP G-Sensor (Performance Meters) -430-A013 | ![]() |
An added feature to the Rev Speed Meter GP, the G-Sensor unit allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G's on the race track, or used in an array of new features including: highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, horse power calculation, and loss power calculation. By taking advantage of the optional G-sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel spin. The G-sensor modifies the speed sensor signal, compensating for wheel spin and producing impeccably accurate times. For use with APEXi Rev/Speed Meter GP (Sold separately). | $41.63 |
![]() | Apex APEXi Rev/Speed Meter GP Shift Lamp (Performance Meters) -430-A011 | ![]() |
With the optional shift indicator light, you can easily incorporate shift points into an A'PEXi Rev Speed Meter-GP (Sold separately). | $21.19 |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | ![]() |
$101.16 |
![]() | ARK Design E-Harness (Performance Meters) -01-1000S-01 | ![]() |
ECU Wiring Harness | $164.48 |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | ![]() |
Multi Function Display. | $370.33 |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | ![]() |
$173.05 |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | ![]() |
$81.99 |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | ![]() |
Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | ![]() |
DISCONTINUED |
![]() | Blitz Touch-B.R.A.I.N. (Performance Meters) -15158 | ![]() |
OBD multi monitor that can display up to 50 items of vehicle information by simply connecting to the failure diagnosis connector (OBD). 3.5 inch touch panel type TFT liquid crystal adoption. It is also excellent in expandability. Simple install - simply connect to OBD part with connector. A variety of beautiful graphics. "Racing" emphasizing visibility, "3D" incorporating near future design - 56 kinds of rich display methods such as "Eco" to support econmical driving. For software version 1.30+, "TOYOTA HYBRID" exclusive communication is available - displays data specific to the hybrid vehicles that would not normally be available. Multi-angle display (left, vertical, right) screen switching. Special holder is included as standard equipment for various mounting positions. microSD card slot and USB port enables data linkage/software update with PC. Option features: - Data logging on USB memory/micro SD card, data analysis via Blitz DATA LOGGING SOFT (Free download). . Real time loggin is available with use of Blitz PC Link Cable - sold separately. By connecting Blitz Sensor Junction Box (sold separately), unit can display additional sensor data (sensors sold separately). Includes Universal Monitor Holder. | DISCONTINUED |
![]() | Blitz Touch-B.R.A.I.N. Option Part (Performance Meters) -15162 | ![]() |
$24.22 |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | ![]() |
DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | ![]() |
$742.67 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | ![]() |
For use with HKS A/F Knock Amp 2/3. | $185.67 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | ![]() |
For use with HKS A/F Knock Amp 2/3. | $64.58 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | ![]() |
Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | ![]() |
DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | ![]() |
$80.73 |
![]() | HKS OB-LINK (Performance Meters) -44009-AK001 | ![]() |
Display/monitor car parameters from OB port via Bluetooth to your Android device (Not included, v2.1+). "Carscope" and "OB-BRIDGE" applications available for download from Google Play. | $112.84 |
![]() | HKS OB-LINK Type-001 More Info (Performance Meters) -44009-AK002 | ![]() |
Connects to vehicle's OBD II connector for display of vehicle data on iOS/Android via Bluetooth. "Carscope" and "OB-BRIDGE" applications available for download from iTunes/Google Play. In addition, the information is logged within its internal memory, and can be setup and accessed via the HKS OB LINK Log Manager app (available from iTunes/Google Play). | $157.92 |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | ![]() |
Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | ![]() |
Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | ![]() |
For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $889.99 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | ![]() |
Part included with A/F Device (repair part). | $454.08 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | ![]() |
Part included with A/F Device (repair part). | $163.47 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | ![]() |
Part included with A/F Device (repair part). | $25.43 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | ![]() |
DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | ![]() |
Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | ![]() |
For NA and Turbo. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | ![]() |
Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | ![]() |
Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | ![]() |
Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | ![]() |
Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | ![]() |
Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | ![]() |
Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | ![]() |
Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz Turbo Timer Harness (Turbo Timers) -51301 | ![]() |
DISCONTINUED |
![]() | HKS Turbo Timer Harness (Turbo Timers) -4103-RF002 | ![]() |
Turbo Timer Harness makes it easy and safe to install HKS Turbo Timers. Take out the key switch wiring connector and connect the HKS Turbo Timer Harness for easy and reliable connection. For use with HKS Turbo Timer Type 0/Type 1/X. | $17.92 |
![]() | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | ![]() |
Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | ![]() |
DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | ![]() |
Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | ![]() |
DISCONTINUED |
![]() | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | ![]() |
10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | $82.24 |
![]() | PIVOT ATT (Turbo Timers) -ATT | ![]() |
Auto Turbo Timer. | $78.30 |
![]() | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | ![]() |
Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | ![]() |
DISCONTINUED |
![]() | PIVOT SAT (Turbo Timers) -SAT | ![]() |
Security Auto Timer. | DISCONTINUED |
![]() | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | ![]() |
Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT TTX (Turbo Timers) -TTX | ![]() |
Ultra compact design. | $69.52 |
![]() | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | ![]() |
Separate type. | DISCONTINUED |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | ![]() |
DISCONTINUED |
![]() | HKB Boss Kit (Boss Kits) -OS-238 | ![]() |
Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $87.88 |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | ![]() |
$23.85 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | ![]() |
DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | ![]() |
Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | $72.47 |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | ![]() |
For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | TRUST Greddy x Works Bell Rapfix II (Boss Kits) -70723801 | ![]() |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $313.73 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | ![]() |
Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $249.24 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | ![]() |
Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $65.13 |
![]() | Works Bell Boss Kit (Boss Kits) -(GL)INBKWKBGEN001 | ![]() |
Depending on vehicle, normal, airbag, and/or auto cruise types available. Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $44.49 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | ![]() |
Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $71.09 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | ![]() |
With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $281.44 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | ![]() |
Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $312.35 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | ![]() |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $242.45 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | ![]() |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $337.67 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | ![]() |
Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -(GL)101070-E | ![]() |
Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $200.90 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | ![]() |
Steering wheel quick release system for competition cars. | $266.94 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | ![]() |
Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $285.29 |
![]() | Works Bell Short Boss for Rapfix (Boss Kits) -107S | ![]() |
Short type (low height) boss kit ideal for use with Works Bell Rapfix. | $132.92 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | ![]() |
This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $26.60 |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | ![]() |
Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | ![]() |
DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | ![]() |
DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | ![]() |
$2,229.11 |
![]() | BRIDE Dress Up Floor Mat (Floor Mats) -FF003A | ![]() |
$245.39 |
![]() | HKS Kansai Floor Mat (Floor Mats) -KYF009 | ![]() |
Thick anti flammability material (FMVSS NO.302 test compliant) cut into shape to suit each specific vehicle type. Equipped with hoook holes and anti slip backing. Right hand drive models only. Made in Japan. | $150.81 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | ![]() |
Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $64.81 |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | ![]() |
$24.95 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | ![]() |
On dash type. | $93.57 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | ![]() |
Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | Defi Triple Meter Hood (Gauge Mounts) -DF03301 | ![]() |
$123.84 |
![]() | GR 3 Gauge Meter Panel (Gauge Mounts) -(GL)INGMGRGDA01 | ![]() |
Holds 3 x 60mm gauges. Includes double sided tape and tapping screws. | $93.02 |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | ![]() |
$17.43 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | ![]() |
$11.65 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | ![]() |
$47.24 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | ![]() |
DISCONTINUED |
![]() | Monster Sport Pillar Meter Hood (Gauge Mounts) -6DPM15 | ![]() |
DISCONTINUED |
![]() | OKUYAMA Carbing Carbon Meter Panel (Gauge Mounts) -262 504 0 | ![]() |
Meter hood that emphasize visibility, gathering meters (gauges) neatly without using the audio (DIN) space. Installation is easy for fixing with double-sided tape. | $287.31 |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | ![]() |
DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | ![]() |
DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | ![]() |
DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Double) (Gauge Mounts) -16060022 | ![]() |
60mm, RHD only. | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | ![]() |
DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | ![]() |
Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | ![]() |
$74.49 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | ![]() |
Mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | $21.10 |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | ![]() |
Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | $24.77 |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | ![]() |
$739.19 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | ![]() |
$536.46 |
![]() | Project μ (Mu) Shoulder Pads (Harnesses) -ACC-SP01 | ![]() |
Seat belt pad. Pair of 2. | $61.09 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | ![]() |
$160.99 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | ![]() |
$169.25 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | ![]() |
DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $354.32 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $371.52 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | ![]() |
Set of 2. | $28.07 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | ![]() |
6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | ![]() |
6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | ![]() |
4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | ![]() |
4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | ![]() |
4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | ![]() |
4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | ![]() |
FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $553.15 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | ![]() |
FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $553.15 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | ![]() |
4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | ![]() |
FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $466.46 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | ![]() |
Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | ![]() |
6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | ![]() |
6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | ![]() |
6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | ![]() |
6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | ![]() |
Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -16500101 | ![]() |
Pair. | DISCONTINUED |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | ![]() |
4 x 4 point harness. | DISCONTINUED |
![]() | LAILE Beatrush Floor Panel (Other) -S76016FPS-A | ![]() |
2mm aluminium checker plate flat floor plate. Right hand drive vehicles only. | $154.34 |
![]() | OKUYAMA DASH Heel Adjust Plate (Other) -315 504 0 | ![]() |
Driver's side floor plate. RHD vehicles only. | DISCONTINUED |
![]() | OKUYAMA DASH Navi Foot Rest (Other) -314 502 0 | ![]() |
Navigator's side floor plate. RHD vehicles only. | $85.31 |
![]() | OKUYAMA CARBING Passenger Plate More Info (Other) -420 001 0 | ![]() |
3mm aluminium. Attatched to floor carpet by velcro tape. | $124.76 |
![]() | STi Room Mirror Shield (Other) -STSG05100230 | ![]() |
DISCONTINUED |
![]() | LAILE Beatrush Driver Foot Rest (Pedals) -S46010DR | ![]() |
In motor sports where intense Gs take place, a firmly, well planted left foot is a necessity. Anodized, drilled aluminium reduces chances of slipping. Pedal: Aluminium. Brackets: Steel. Right hand drive models only. | $41.28 |
![]() | NEOPLOT Foot Rest Bar NEO (Pedals) -NP71210 | ![]() |
Adjustable foot position. Right hand drive models only. | $84.49 |
![]() | STi Pedal Pad Set (Pedals) -ST3600055000 | ![]() |
DISCONTINUED |
![]() | BRIDE FG Type Super Seat Rail (Seat Accessories) -F019FG | ![]() |
For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZETA III Type-XL and ZODIA. Also suitable for RECARO SP-G, SPARCO Prodrive, AAR Racing, Cobra and other full bucket seats within size limits of seat rail. Sliding type. | $146.91 |
![]() | BRIDE FX Type Super Seat Rail (Seat Accessories) -F019FX | ![]() |
For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $179.61 |
![]() | BRIDE IG Type Super Seat Rail (Seat Accessories) -F019IG | ![]() |
For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZETA III Type-XL and ZODIA. Also suitable for RECARO SP-G, SPARCO Prodrive, AAR Racing, Cobra and other full bucket seats within size limits of seat rail. Aluminium side brackets. Sliding type. | $162.51 |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | ![]() |
Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $50.96 |
![]() | BRIDE MO Type Super Seat Rail (Seat Accessories) -F019MO | ![]() |
For use with BRIDE reclinable seats. EUROSTER series, DIGO series, edirb 032/054, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Super Low Position (maximum -30mm). Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $163.82 |
![]() | BRIDE RO Type Super Seat Rail (Seat Accessories) -F019RO | ![]() |
For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $144.53 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | ![]() |
$47.06 |
![]() | BRIDE XL Type Super Seat Rail (Seat Accessories) -F019XL | ![]() |
For use with BRIDE ZETA III type-XL seats. Super low position (maximum -30mm). | $203.01 |
![]() | BRIDE YO Type Super Seat Rail (Seat Accessories) -F019YO | ![]() |
For use with BRIDE reclinable seats (BRIX, ERGO, XAX, REVS). Super Low Position (maximum -30mm). | DISCONTINUED |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | ![]() |
DISCONTINUED |
![]() | HKS Kansai Low Position Seat Rail (Seat Accessories) -KIF001 | ![]() |
Optimises seating position of standard seats. Compatible with seat lifter and/or other functions of the standard seats. | $227.59 |
![]() | Prodrive Seat Rail (Seat Accessories) -(GL)INSE-PRD-GDB-01 | ![]() |
$174.29 |
![]() | RECARO Base Frame (Seat Accessories) -2086.524.2 | ![]() |
Seat rails. | $211.90 |
![]() | RECARO Offset Side Adapter Set (Seat Accessories) -1700001J | ![]() |
For use with RECARO Base Frame and full bucket seats. | $74.30 |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | ![]() |
For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $79.81 |
![]() | STi Base Frame Set (Seat Accessories) -640104S220 | ![]() |
For use with STi Full Bucket Seats (RECARO). | DISCONTINUED |
![]() | Prodrive Competition Seat (Seats) -55660011 | ![]() |
Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | $1,335.18 |
![]() | STi Full Bucket Seat (Seats) -640104S200 | ![]() |
DISCONTINUED |
![]() | LAILE Beatrush Alumi Shift Knob Type-EBR (Shift Knobs) -A91212AB-EBR | ![]() |
Billet aluminium shift knob, with alumite finish. Approx 138g. | $53.39 |
![]() | MOONFACE Super Lap Aluminium Shift Knob Ver I (Shift Knobs) -ONA03O | ![]() |
DISCONTINUED |
![]() | MOONFACE Super Lap Aluminium Shift Knob Ver II (Shift Knobs) -ONA03B | ![]() |
DISCONTINUED |
![]() | MOONFACE Super Lap Titanium Shift Knob Ver I (Shift Knobs) -ONT03O | ![]() |
DISCONTINUED |
![]() | MOONFACE Super Lap Titanium Shift Knob Ver I (Polish) (Shift Knobs) -ONT03PO | ![]() |
$224.75 |
![]() | MOONFACE Super Lap Titanium Shift Knob Ver II (Shift Knobs) -ONT03B | ![]() |
DISCONTINUED |
![]() | STi Shift Knob (Shift Knobs) -STS025500180 | ![]() |
Leather, red stitching. | DISCONTINUED |
![]() | STi Shift Knob (Duracon R) (Shift Knobs) -ST35022ST280 | ![]() |
Duracon (R). | DISCONTINUED |
![]() | STi Shift Knob (Duracon) (Shift Knobs) -ST35022ST270 | ![]() |
$79.44 |
![]() | TRUST GREX Shift Knob (Shift Knobs) -14560501 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy Shift Knob A Type More Info (Shift Knobs) -14500572 (GSK-A02) | ![]() |
Height adjustable aluminium shift knob. Includes 5 types of shift pattern sticker. | $63.30 |
![]() | TRUST GREX Type SH Shift Knob (Shift Knobs) -14510530 | ![]() |
Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
![]() | TRUST GREX Type SL Shift Knob (Shift Knobs) -14510531 | ![]() |
Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
![]() | IKEYA FORMULA Sequen Shifter (Shifter Kits) -IFBJ03004 | ![]() |
Changes the normal shift pattern to sequential "I" (forwards and backwards) pattern. Full bolt on installation. Shift Indicator sold separately. | $1,760.36 |
![]() | IKEYA FORMULA Sequen Shifter Boot (Shifter Kits) -(GL)IFBJ03004-BOOT | ![]() |
  | $95.68 |
![]() | IKEYA FORMULA Sequen Shifter Indicator (Shifter Kits) -(GL)IFBJ03004-SHIFT-S | ![]() |
Option part for use with IKEYA FORMULA Sequen Shifter. Displays current gear. | $204.84 |
![]() | PROVA Adjustable Shifter (Shifter Kits) -70000CB0110 | ![]() |
DISCONTINUED |
![]() | STi Gear Shift Lever Assembly (Shifter Kits) -ST350104S000 | ![]() |
Quick shift kit. | $181.36 |
![]() | Works Bell Paddle Shifter Neo (Shifter Kits) -115NEO | ![]() |
Works Bell Paddle shifter kit places specially designed carbon paddles which control up/down shifts on the steering column. Paddle stroke: 7mm. 20mm thick steering boss body (suitable for standard length boss kits). Paddle adjustment range: 15mm (left and right) to match size of steering wheel/hand size. Car specific kits are fully boly on install with no wiring modifications necessary. | $337.67 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | ![]() |
Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TPS-GEN-01 | ![]() |
  | DISCONTINUED |
![]() | TRUST Greddy Sports Steering (Steering Wheels) -16600001 | ![]() |
Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. | $296.30 |
![]() | Apex APEXi Power Intake Kit More Info (Air Filters) -507-F004 | ![]() |
Air filter with minimal air-flow restriction. Dual funnel filter system minimizes intake turbulence. Vehicle specific kits include adapters and other fitting parts. The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spotsb within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is touble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. | $120.17 |
![]() | Blitz Advance Power Cleaner More Info (Air Filters) -42133 | ![]() |
Superceding the BLITZ Sonic Power Cleaner, the new Blitz Advance Power Cleaner uses a stainless steel mesh filter that produces high inhalation efficiency and racy intake sound. Cooling shield with large diameter funnel shields radiant heat from the engine bay, preventing heat soak of the filter. By suppressing the rise in the temperature of the filter, high filling efficiency is maintainted providing a stable suction temperature. With the variable shield structure, it is possible to secure a large amount of air around the filter, and it is effective for instantaneous increase of intake air. Large diameter funnels efficiently supply a large amount of air, achieving high suction efficiency. Cooling shield made of aluminum, with blue anodized lock plate. | $300.15 |
![]() | Blitz Carbon Power Air Cleaner More Info (Air Filters) -35133 | ![]() |
Uses the highly acclaimed stainless mesh filter from SUS Power/Advance Power air cleaners. Conical body with "M" folds maximise the intake area, while balancing dust collecting ability with intake efficiency. The carbon shield deflects surrounding heat, preventing intake air temperature from rising. Being made from carbon, the shield itself emits very little heat. With proper care and maintenance, the stainless mesh filter can be used indefinitely. | $349.32 |
![]() | Blitz Carbon Suction Kit (Air Filters) -27004 | ![]() |
$585.62 |
![]() | Blitz Sonic Power Air Cleaner (Air Filters) -58133 | ![]() |
DISCONTINUED |
![]() | Blitz SUS Power Air Cleaner More Info (Air Filters) -26133 | ![]() |
Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | $192.46 |
![]() | Blitz SUS Power Core Type LM More Info (Air Filters) -56133 | ![]() |
Filter colour: blue. | $123.66 |
![]() | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59133 | ![]() |
Filter colour: red. | $123.66 |
![]() | HKS Racing Suction (Air Filters) -70020-AF101 | ![]() |
The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits. To maximise intake capacity, HKS has carefully revised their HKS Racing Suction Reloaded for each car model, delivering the ultimate intake system to further increase the power. Filters use the new hyper stealth frame, where the opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. | $233.92 |
![]() | HKS Racing Suction Reloaded (Air Filters) -70008-AF003 | ![]() |
DISCONTINUED |
![]() | HKS Super Power Flow (Air Filters) -70019-AF103 | ![]() |
Infamously known as the "invisible filter", the Super Power Flow Filter has further evolved utilising the new hyper stealth frame. Opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. Vehicle specific kits include adapters and other fitting parts. | $144.66 |
![]() | HKS Super Power Flow (Old) (Air Filters) -70004-AF008 | ![]() |
DISCONTINUED |
![]() | HKS Super Power Flow Reloaded (Air Filters) -70019-AF008 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy AIRINX B-Type (Air Filters) -12561006 | ![]() |
Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | $126.37 |
![]() | Apex APEXi Power Intake Filter More Info (Air Filters (Panel/OEM) Type) -503-N101 | ![]() |
Factory replacement filter featuring: Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt. Dry-type filter element requires no oiling, and will not foul air flow sensors. Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed. Easy intallation, cleaning, and maintenance. | $36.23 |
![]() | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -SN-24B 59515 | ![]() |
Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | $34.90 |
![]() | HKS Super Air Filter More Info (Air Filters (Panel/OEM) Type) -70017-AN101 | ![]() |
New standard (stock) replacement type air filter utilizing newly developed dry non-woven fabric filter. High dust collection capacity and low resistance are implemented together at a high level. | $34.90 |
![]() | HKS Super Hybrid Filter More Info (Air Filters (Panel/OEM) Type) -70017-AN001 | ![]() |
3 layered filter, with each layer serving a different function. Well balanced stock replacement type air cleaner for sporty quick engine response while being highly durable. | DISCONTINUED |
![]() | Monster Sport Power Filter PFX300 (Air Filters (Panel/OEM) Type) -ND1 | ![]() |
$47.24 |
![]() | TRUST GReddy AIRINX GT (Air Filters (Panel/OEM) Type) -12522501 (NS-1GT) | ![]() |
High performance standard replacement (drop in) air cleaner/filter. Special high performance dry type fiber filter drastically improves intake efficiency. High rigidity and durability are achieved by using a steel net laminate structure. Rubber frame provides excellent sealing performance, keeping dust out. High performance and high quality, at a reasonable price. Direct swap for the genuine (stock) air filter, and can be easily replaced. | $35.59 |
![]() | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | ![]() |
DISCONTINUED |
![]() | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | ![]() |
DISCONTINUED |
![]() | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | ![]() |
DISCONTINUED |
![]() | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | ![]() |
DISCONTINUED |
![]() | Blitz Super Sound Blow Off Valve BR (Blow Off Valves and Kits) -70681 | ![]() |
Vehicle specific kit. Super Sound Blow Off Valve BR (Blow Response). High quality aluminum die-cast body. High precision CNC machining optimizes the clearances, achieving smooth and responsive piston movement. The piston itself has a coating to improve corrosion resistance, as well as providing excellent lubrication performance even in tight clearances. Special black coating and anodized red highlights are resistant to corrosion and ideal for dressing up the engine room. Revision of the venturi design of the funnel has increased the flow rate by 17%, while creating a sharper, more powerful opening sound than the previous model. | $240.71 |
![]() | Blitz Super Sound Blow Off Valve VD Kit More Info (Blow Off Valves and Kits) -70181 | ![]() |
Vehicle specific kit. Venturi Drive valve. Employs the dual drive mechanism from the previous Super Sound Blow Off Valve DD. Funnel is venturi shaped to create sharp, dynamic sound. High quality die cast aluminium. Dissipates heat effectively through the ribs on the main body and funnel. 36mm big valve (with rubber) ensures sealing even in high boost applications. Piston is coated with special lubricating agent to prevent dirt/dust from damaging the piston. | DISCONTINUED |
![]() | Coto Sports TC Blow Off Valve (Blow Off Valves and Kits) -BOV-S03 | ![]() |
Heavy duty standard replacement blow off valve. Increased valve opening pressure results in response of the turbo is increased significantly, boost starting lower in the rpm range. As a result, the medium and low speed torque is increased. Being replacement of the standard blow off unit, engine stall/idling are not an issue. | $134.94 |
![]() | HKS Super SQV II Kit (Blow Off Valves and Kits) -71004-AF006 | ![]() |
DISCONTINUED |
![]() | HKS Super SQV Kit (Blow Off Valves and Kits) -1421-SF006 | ![]() |
DISCONTINUED |
![]() | PROVA High Pressure Bypass Valve (Blow Off Valves and Kits) -50220BL0010 | ![]() |
DISCONTINUED |
![]() | PROVA High Pressure Bypass Valve 220 (Blow Off Valves and Kits) -50220AH0010 | ![]() |
HP bypass valve. Features a higher spring rate than the OEM part and is constructed to be extremely durable. With a valve opening pressure approximately 20% greater than standard, turbo response is improved while preventing the problems associated with using an atmospheric blow off valve on a mass airflow sensor equipped vehicle. Black alumite finish makes it an excellent dress-up part for the engine bay. | $357.76 |
![]() | SARD R2D2 Blow Off Valve Kit (Blow Off Valves and Kits) -66175 | ![]() |
Racing Blow Off Twin Drive Type-2 (Angle Type). | DISCONTINUED |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | ![]() |
DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve FV Kit More Info (Blow Off Valves and Kits) -11561207 (BFV-610) | ![]() |
Vehicle specific kit. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. | $253.41 |
![]() | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | ![]() |
Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | $179.61 |
![]() | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | ![]() |
Universal. Blow off valve unit only. | $221.90 |
![]() | TRUST GReddy Blow Off Valve Type RS Adapter Set (Blow Off Valves and Kits) -11561110 | ![]() |
Vehicle specific kit. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type S Adapter Set (Blow Off Valves and Kits) -11561001 | ![]() |
Vehicle specific kit. | DISCONTINUED |
![]() | Apex APEXi Aluminium Induction Box (Induction Boxes and Ducts) -517-F001 | ![]() |
$149.52 |
![]() | ARC Super Induction Box (Induction Boxes and Ducts) -IDBGDB03 | ![]() |
Includes filter(s). | DISCONTINUED |
![]() | HKS Kansai Carbon Air Duct (Induction Boxes and Ducts) -KPF006 | ![]() |
Air duct only. | $341.25 |
![]() | HKS Kansai Racing Suction R and Carbon Air Duct Set (Induction Boxes and Ducts) -KPF021 | ![]() |
HKS Racing Suction Kit and Carbon Air Duct Set. | $635.25 |
![]() | PROVA Carbon Intake Duct (Induction Boxes and Ducts) -50010TR0000 | ![]() |
Carbon fiber/fiberglass intake duct replaces the OEM unit and features a wider inlet and smoother internal features for improved airflow. As it uses the same mounting points as the original unit, installation is simple. The beautiful carbon fiber also serves as an accent to any performance engine bay. | DISCONTINUED |
![]() | TRUST GReddy Air Flow Sensor Harness (Other) -11920251 | ![]() |
General purpose air flow sensor coupler harness used when diverting air flow sensor. | $12.38 |
![]() | TRUST GReddy Air Flow Sensor Pipe (Other) -11920250 | ![]() |
Universal air flow sensor adapter for use with custom intake piping. | $82.15 |
![]() | SAMCO Sport Air Intake Pipe Kit (Piping) -40TB1217 | ![]() |
Blue, red, yellow, purple, green, black or orange. | $93.57 |
![]() | SAMCO Sport Induction Hose Kit (Piping) -40TB997 | ![]() |
Blue, red, yellow, purple, green, black or orange. | $428.85 |
![]() | TOMEI Turbo Suction Hose (Piping) -451002 | ![]() |
Specifically designed to reduce the restriction of the intake airflow to the turbo, which improves response and achieves increased power gains. The silicone reinforced structural design prevents the deformation of the hose while under high pressure loads. This also increases durability and reliability whilst optimizing the turbos performance. | $258.60 |
![]() | Zero Sports Air Intake Pipe (Piping) -0413004 | ![]() |
$141.82 |
![]() | ARC Super Induction Box Replacement Filter (Replacement Filters) -19001-20092 | ![]() |
Replacement filter for ARC Super Induction Box. | $78.16 |
![]() | ARC Super Induction Box Replacement Filter Version II (Replacement Filters) -IDBES-D03 | ![]() |
Replacement filter for ARC Super Induction Box. | DISCONTINUED |
![]() | Apex APEXi Super Catalyzer (Catalytic Converters / Straight Pipes) -149-F002 | ![]() |
$1,159.51 |
![]() | HKS Metal Catalyzer (Catalytic Converters / Straight Pipes) -33005-AF002 | ![]() |
Normally at conflict with each other, catalytic converter that achieves high engine output and high emissions standards. Target horsepower: 500~600PS. 150 cell (Except some types). 0.1mm thick fins for better durability. | $843.94 |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | ![]() |
Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | $688.00 |
![]() | SARD Sports Catalyzer (Catalytic Converters / Straight Pipes) -89042 | ![]() |
Sports catalytic converter for high power and high response. Vehicle specific models feature either a 200/180cpsi large metal honeycomb structure cell (withstands 1200°C, made in Japan), heat plate (shield) precision welded into a unit designed to replace the standard unit. | $719.19 |
![]() | Blitz NUR-SPEC R (Exhaust Systems (Cat Back)) -MS3070 | ![]() |
Straight type competition use model ideal for circuit use. Exhaust system with removable silencer to adjust power output and volume. Maximum performnace in closed circuits when silencer is removed, decreased volume with silencer installed for street use. Fully constructed using SUS 304 stainless steel for looks and maximum durability. | $491.23 |
![]() | HKS Super Turbo Muffler (Exhaust Systems (Cat Back)) -31029-AF002 | ![]() |
High-dimensional Super Turbo Muffler. Exhaust Efficiency & Sound Pressure Reduction are implemented together. The turbo engine masters HKS developed the Super Turbo Muffler, prioritising the following 3 characteristics together to develop Super Turbo Muffler: - Effective on stock~high performance vehicles with upgraded turbos. - Performance exhaust that still meets JASMA volume standards. - Unique exhaust sound designed specifically for each engine type. | $743.04 |
![]() | J Speed J-Power Muffler (Exhaust Systems (Cat Back)) -(GL)EXCBJSPWRXA01 | ![]() |
$770.56 |
![]() | TOMEI EXPreme Ti Titanium Muffler (Exhaust Systems (Cat Back)) -440005 | ![]() |
High quality production, for true competition use without any compromises. Only the best grade titanium used. TOMEI have poured their vast exhaust knowledge into the these systems, from the special racing layout design (made as straight as possible) through to the high flow silencer. The EXPREME Ti systems are unrivaled in terms of performance and price. | $1,076.03 |
![]() | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A001 | ![]() |
The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | ![]() |
DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | ![]() |
DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | ![]() |
DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | ![]() |
Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $37.43 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 001 0 | ![]() |
Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $260.71 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | ![]() |
Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | ![]() |
$18.99 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | ![]() |
As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $13.53 |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | ![]() |
Universal gear oil cooler kit. | $700.20 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HDOC-AN610 | ![]() |
Universal differential oil cooler kit. | $608.19 |
![]() | Kinokuni Rear Differential Oil Cooler Kit (Differential Oil Coolers) -KDS-001R | ![]() |
$730.47 |
![]() | Billion Window Duct For Circuit (Ducts and Ducting) -BWD-GDB-001 | ![]() |
$285.93 |
![]() | ARC Intercooler Kit (Front Mount Type) More Info (Intercoolers) -M073GDBF04 | ![]() |
DISCONTINUED |
![]() | ARC Intercooler Kit (Standard Replacement Type) More Info (Intercoolers) -1F094-AA086 | ![]() |
DISCONTINUED |
![]() | Blitz LM Intercooler Kit (Intercoolers) -12345 | ![]() |
DISCONTINUED |
![]() | HKS GT TYPE Intercooler Kit (Intercoolers) -13001-AF001 | ![]() |
Ultimate Cooling Performance. Recommended for drag/race applications. Redesign of the fin shape reduced the weight by 10% of the conventional core maintaining the original performance (most applications). | DISCONTINUED |
![]() | HKS S TYPE Intercooler Kit (Intercoolers) -13001-AF002 | ![]() |
S TYPE is designed for street use; ideal for stock vehicles, lightly tuned vehicles, and for vehicles with stock replacement type turbines. The engine response under street driving and performance at a mid to high speed range are well-balanced. Core features: Inner fins 1. Short type - We have adopted short type that the pitch is optimized for fin shape, for small and light to improve the cooling efficiency. 2. Triangular straight type - We adopted triangular straight type for less pressure loss of air flow. Outer Fins (triangular louver type) - Cooling efficiency improved with louver because of the shorter length and angle of the fin. - Wide surface of louver make it more efficient in cooling. Aluminium polished piping type kits available for some models. | DISCONTINUED |
![]() | SARD Intercooler (Intercoolers) -31460 | ![]() |
Standard replacement type intercooler. 150~200% larger than standard. | DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit (Intercoolers) -12060020 | ![]() |
Recommended for sports turbine~full tune applications. Lightweight intercooler core (tube type, offset inner fin) design focused on cooling efficiency, maximizing filling efficiency (reduced pressure loss), in high power/high boost. - SPEC-R HG: Mirror finish side tanks, buff finish aluminium piping. - SPEC-R: barrel finish tanks and aluminium piping. Cores are CCP treated for increased corrosion resistance. | DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit SPEC-R HG (Intercoolers) -12060405 | ![]() |
$1,141.25 |
![]() | TRUST GReddy Intercooler Kit SPEC-V (Intercoolers) -12060404 | ![]() |
$997.60 |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | ![]() |
Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Kit (Standard Type) (Oil Coolers) -12064605 | ![]() |
$616.81 |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | ![]() |
W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $26.44 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | ![]() |
1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | ![]() |
1 piece. | DISCONTINUED |
![]() | LAILE Beatrush Under Panel (Other) -S560160 | ![]() |
Smooths airflow beneath the car for downforce, while extracting heated air in the engine bay. 2mm aluminium. | $152.46 |
![]() | TRUST Gear Oil Pump (Other) -12004820 | ![]() |
Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $374.27 |
![]() | TRUST GReddy Washer Tank (Other) -13506100 | ![]() |
Universal. 1.5L. Suitable for use with 1 or 2 pumps. GReddy logo. For relocation of washer tank in engine bays with tight clearances. | $43.16 |
![]() | Apex APEXi GT-Spec Radiator Cap (Radiator Caps) -591-A001 | ![]() |
1.3 kg/cm2 (127kPa). | $24.95 |
![]() | HKS Radiator Cap More Info (Radiator Caps) -15009-AK004 | ![]() |
Silicone rubber seal improves sealing properties. This radiator cap can support the reliable cooling performance under severe driving conditions. | $28.71 |
![]() | OKUYAMA Carbing High Pressure Radiator Cap (Radiator Caps) -222 000 0 | ![]() |
Relief pressure 127kpa (1.3kg/cm2). | $21.83 |
![]() | PROVA Sports Radiator Cap (Radiator Caps) -10000SP0020 | ![]() |
This performance radiator cap has its valve pressure set at 127kPa, ensuring the cooling system's maximum performance. By raising the coolant pressure, the coolant's boiling point is raised above that achieved with the standard cap. This gives more headroom in the coolant system under extreme conditions before boiling, which severely hinders cooling ability. The use of corrosion resistant stainless steel and heat resistant soft silicone for the inner passage seal improves sealing performance, resulting in both high durability and performance. Featuring a pressure valve spring made to a tolerance of +/- 0.1kg/cm2, this is a replacement pressure cap with high precision and quality. | $25.69 |
![]() | SARD High Pressure Radiator Cap (Radiator Caps) -61005 | ![]() |
$19.49 |
![]() | STi Radiator Cap (Radiator Caps) -ST4511355000 | ![]() |
1.3 kg/cm2 (127kPa). | $38.71 |
![]() | TRUST GReddy Radiator Cap (Radiator Caps) -13901002 | ![]() |
The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $26.42 |
![]() | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901000 | ![]() |
1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | Billion Super Solid Coolant Line (Radiator Pipes and Hoses) -BWL-22 | ![]() |
  | $124.02 |
![]() | HPI Silicon Radiator Hose (Radiator Pipes and Hoses) -HPSRH-GDBBL | ![]() |
Silicon radiator hoses with HPI logo. | $155.95 |
![]() | Night Pager Water Bypass Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPGDB01 | ![]() |
Stabilises coolant temperature by bypassing the coolant from the heater hose. This bypass function stabilises the rear cylinder temperature where heat easily accummulates, preventing heat soak and over heating. Billet aluminium A5056 adapters. Stainless mesh bypass hose. | $208.78 |
![]() | SARD Radiator Hose (Radiator Pipes and Hoses) -79538U | ![]() |
Silicone. 3 ply. | $82.56 |
![]() | CUSCO Radiator Cooling Plate (Radiator Shrouds (Hoods)) -667 003 AL | ![]() |
Radiator shroud made of light weight aluminium, with blue alumite finish. Includes all parts required for bolt on installation. | $84.03 |
![]() | LAILE Beatrush Radiator Cooling Panel (Radiator Shrouds (Hoods)) -S146016RP | ![]() |
Aluminium (Thickness 1.2mm). | $78.39 |
![]() | Monster Sport Aluminium Radiator Shroud (Radiator Shrouds (Hoods)) -6DM10 | ![]() |
DISCONTINUED |
![]() | Monster Sport Carbon Radiator Shroud (Radiator Shrouds (Hoods)) -6DMA50 | ![]() |
DISCONTINUED |
![]() | OKUYAMA CARBING Radiator Cooling Plate (Radiator Shrouds (Hoods)) -421 041 0 | ![]() |
Attached to the upper part of the radiator and the upper part of the front grill, the radiator cooling plate closes the gap between the main radiator body and the front grill. This increases the volume of air flowing through the radiator, increasing cooling efficiency. It also provides an aesthetically pleasing touch to the engine bay. | $126.32 |
![]() | TRUST GReddy Air Diversion Plate (Radiator Shrouds (Hoods)) -12064200 | ![]() |
DISCONTINUED |
![]() | Zero Sports Cool Radiator (Radiator Shrouds (Hoods)) -0307111 | ![]() |
DISCONTINUED |
![]() | ARC Prestige R Aluminium Radiator (Radiators) -SMC36GDB03 | ![]() |
Aluminium. | DISCONTINUED |
![]() | ARC Radiator (Radiators) -1F094-AA087 | ![]() |
The most efficient single core aluminium radiator. Inner tube uses a micro tube molded by a special manufacturing method. ARC have secured the required strength while keeping weight low. The outer fin has a slit structure that increases the surface area and achieves stable cooling performance, proven in many race applications. | $1,056.77 |
![]() | Blitz Racing Radiator Type ZS (Radiators) -18852 | ![]() |
All polished aluminium model. 42mm wide (2 core). - Low cost, lightweight, all aluminium radiator. Possible by new manufacturing method. - 42mm thick core and large tanks makes for substantial increase in cooling capacity. Designed for use with standard electic fans and shrouds (some models may require some modifications for fitting). - Polished finish on tanks. - 1/8PT sensor attachment hole. - New type outer fin enhances heat dissipation. - Designed specifically for each vehicle type, with optimised tube pitch (angle). - Anodised drain bolt and BLITZ radiator cap are included. | $335.56 |
![]() | HKS Kansai Aluminium Radiator (Radiators) -KWF401 | ![]() |
All aluminum radiator. Includes Kansai Service radiator cap (127kPa). | DISCONTINUED |
![]() | HPI Radiator Evolve (Radiators) -HPARE-GDB | ![]() |
Aluminium. 2 core (wide tube). | $350.88 |
![]() | KOYO Type-F Radiator (Radiators) -KH091672R | ![]() |
Full aluminium (core and tanks). 2 row 48mm (wide) core (8.6mm tube pitch). The new flasghip model of KOYO racing radiators, it is thinner and lighter, yet maintains the high heat dissipation performance of its predessor (Type-Z). Compared to Type-Z: - Better heat disspation due to improved air pressure loss (Approx 35%. - Approx 1kg lighter (dry weight, and 1.5~2kg lighter (with coolant), depending on model. - Less risk of interference with accessories and peripheral auxiliary equipment due to thinner core. - Lower pressure loss possibly reducing the burden on the radiator cooling fan and increase the air flow rate of the cooling fan. | $562.78 |
![]() | KOYO Type-Z Radiator (Radiators) -KL091672 | ![]() |
Aluminium 2 row 53mm (wide) core. All aluminium type. Top level cooling performance while still being light weight. With heat dissipation up up to 35% greater than standard radiators, it is perfect for high power, full tune engines. | DISCONTINUED |
![]() | SARD Racing Radiator (Radiators) -29025 | ![]() |
Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. | DISCONTINUED |
![]() | SARD Racing Radiator and Cooling Thermo Set (Radiators) -29025 + 19408 | ![]() |
Limited time special campaign radiator and thermostat set. SARD Racing Radiator: Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. SARD Cooling Thermo: Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | DISCONTINUED |
![]() | TRUST GReddy Aluminium Radiator (Radiators) -12063700 | ![]() |
2 core (wide tube design). | DISCONTINUED |
![]() | TRUST GReddy Aluminium Radiator TW-R (Radiators) -12063802 | ![]() |
2 core wide tube design provides the same capacity as conventional 3 core designs. Cooling water capacity is more than twice standard, with greater flow. Weight is kept low due to the all aluminium construction. Suitable for street and circuit use. 1/8PT sensor boss. Polished tanks. | $295.56 |
![]() | TRUST Subaru Radiator Fitting Kit (Radiators) -45175FE010 + 45162FE010 + 45162FE000 | ![]() |
$49.81 |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | ![]() |
Aluminium radiator reserve tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $111.36 |
![]() | Billion Super Thermo (Thermostats) -BSSU-30 | ![]() |
Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | $62.65 |
![]() | SARD Cooling Thermo (Thermostats) -19408 | ![]() |
Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | $58.25 |
![]() | Zero Sports Cool Thermo (Thermostats) -0310002 | ![]() |
$73.48 |
![]() | Kinokuni Transmission Oil Cooler Kit (Transmission Oil Coolers) -KMS-001R | ![]() |
$730.47 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | ![]() |
Universal compact transmission oil/power steering fluid cooler. | $467.84 |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | ![]() |
Universal transmission or differential oil cooler kit. | $764.14 |
![]() | Advance High Efficiency Alternator (Alternators) -HE130-012S-GunMetal | ![]() |
High power, low resistance, highly efficient 3 layer coil. 1. Ultra lightweight duralumin pulley. 2. Car specific alternator cases. 3. Mitsubishi/9G 3 layer stator coil. 4. Mitsubishi IC regulator. | $631.81 |
![]() | RH9 150A NEW Hiper Alternator (Alternators) -(GL)ENALRH9-HYPALT-11 | ![]() |
150A / 12V. Mitsubishi/9G 3 layer stator coil. Lightweight duralumin pulley | $820.55 |
![]() | Power Enterprise F1 Black Metal (Conrod) (Bearings) -1101-MF214 | ![]() |
Set. | $182.37 |
![]() | Power Enterprise F1 Black Metal (Main) (Bearings) -1102-MF214 | ![]() |
Set. | $259.05 |
![]() | TOMEI Competition Bearing (Conrod) More Info (Bearings) -127400 | ![]() |
Upper and lower set. | $30.59 |
![]() | TOMEI Competition Bearing (Main) More Info (Bearings) -126400 | ![]() |
Upper and lower set. | $30.59 |
![]() | HKS Fine Tune Timing Belt (Belts and Chains) -24999-AF001 | ![]() |
Designed for use with HKS Slide Cam-Pullies (Sold separately), these belts are optimized for each engine type. Ideal for high power/high rpm applications. Designed to allow stable belt extension even when heat expansion occurs in the engine. Correctly shaped belt teeth reduces chances of slipping in high torque engines at lower belt tension, therefore not compromising belt strength. Teeth rubber are made from H-NBR grade rubber for additional strength. * Materials and/or molding method may vary sightly depending on application. | $173.19 |
![]() | HKS Fine Tune V Belt (Belts and Chains) -24996-AK012 | ![]() |
Using the latest in belt technology, these belts maintain engine condition, while improving engine room appearance. Increased durability at high temperatures which can be found in the engine bay of tuned vehicles. Increased performance in cold weather conditions. Lightweight and good friction tolerance properties, mean that excess tension is not required, while anti-sound properties reduces belt squeal. EPDM (Ethylene Propylene Diene Monomer) Rubber is used in the manufacture of these belts because of: - Better durability and performance in hotter or colder conditions with improved friction tolerance. - Much lighter than previous version of belt. - Short fiber mixture in rib rubber improves the performance over previous version. Compared to standard belts: High temperature durability: 4 times greater. Low temperature durability: 10 times greater. Abrasion resistance: 30% improved. Weight: 17% lighter. Noise: Less. | $39.45 |
![]() | Power Enterprise Super Kevlar II Timing Belt (Belts and Chains) -BF211 | ![]() |
Stretch resistant - Maintains long-term performance. Significant improvements against belt tooth failure and cut resistance. Drives camshafts accurately. | $167.23 |
![]() | Power Enterprise Super Kevlar V Belt (Belts and Chains) -5PK877-Blue | ![]() |
Compared to standard belts, Power Enterprise Super Kevlar V Belts are: 4 times more heat resistant. 3 times more resistant to slip. 2 times less abrasive. | $34.17 |
![]() | STi Timing Belt (Belts and Chains) -ST130284S000 | ![]() |
Heavy duty type. For competition use. EJ20 engines. | $140.35 |
![]() | TODA High Power Timing Belt (Belts and Chains) -06141-EJ2-000 | ![]() |
The additional stresses placed on the original OEM timing belt are considerable when using up-rated valve springs and high lift camshafts in more arduous sports driving conditions. These additional stresses lead to, among other things increased stretch degradation resulting in inaccurate valve timing as well as reduced durability. TODA High Power Timing Belts are designed from high quality materials to give improved durability as well as reduced stretch degradation. Compared to standard belts: Resistance to cutting: approx. 3.5~4 times. Heat resistance: approx. 2.5~3 times. Tooth integrity: approx. 3~4 times. Resistance to abrasion: approx. 2.5 ~ 3 times. | $150.44 |
![]() | TOMEI EJ Timing Belt Guide (Belts and Chains) -191263 | ![]() |
$47.52 |
![]() | TOMEI Heavy Duty Timing Belt (Belts and Chains) -151084 | ![]() |
Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more. | $157.23 |
![]() | JUN Heavy Duty Valve Springs (Camshaft and Valvetrain Parts) -1009M-F002 | ![]() |
$197.23 |
![]() | JUN Strengthened Valve Guide (Camshaft and Valvetrain Parts) -1008M-F001 | ![]() |
Heavy duty racing valve guide set. | $228.42 |
![]() | JUN Titanium Valve Retainers (Type 1) (Camshaft and Valvetrain Parts) -1005M-F004 | ![]() |
$343.08 |
![]() | JUN Titanium Valve Retainers (Type 2) (Camshaft and Valvetrain Parts) -1005M-F204 | ![]() |
Treated surface for better wear resistance. | $452.24 |
![]() | TOMEI Bery Ring Set (Camshaft and Valvetrain Parts) -162010 | ![]() |
Beryllium. | $311.89 |
![]() | TOMEI Exhaust Valve Guide (Camshaft and Valvetrain Parts) -161301 | ![]() |
Phosphor bronze (PBB). | $20.78 |
![]() | TOMEI Inlet Valve Guide (Camshaft and Valvetrain Parts) -161300 | ![]() |
Phosphor bronze (PBB). | $20.78 |
![]() | TOMEI Titanium Valve Spring Retainers (Camshaft and Valvetrain Parts) -163203 | ![]() |
$249.51 |
![]() | TOMEI Valve Guide Set (Camshaft and Valvetrain Parts) -163300 | ![]() |
Phosphor bronze (PBB). | $196.22 |
![]() | TOMEI Valve Springs (Camshaft and Valvetrain Parts) -163027 | ![]() |
$165.03 |
![]() | JUN Cam Slide Sprocket (Camshaft Pulleys and Sprockets) -1006M-F005 + 1006M-F103 + 1006M-F006 + 1006M-F104 | ![]() |
Adjust the best valve timing when you change camshaft and/or do engine tuning. Able to correct off valve timing according to resurfacing cylinder head when overhaul. JUN Cam Slide Sprockets have marks for every 4 degrees of crank duration (Majority of applications). | $976.96 |
![]() | TOMEI Adjust Pulley (Camshaft Pulleys and Sprockets) -152017 | ![]() |
Adjustable Cam Gear. | $164.48 |
![]() | HKS Camshaft (Camshafts and Camshaft Kits) -22002-AF005 | ![]() |
$499.03 |
![]() | JUN Cam Slide Sprocket Option Set (Camshafts and Camshaft Kits) -1033M-F702 | ![]() |
JUN Camshaft Kit option part. | $561.41 |
![]() | JUN Camshaft (Camshafts and Camshaft Kits) -1004M-F011 | ![]() |
$399.96 |
![]() | JUN Stage 1 Camshaft Kit (Camshafts and Camshaft Kits) -1033M-F004 | ![]() |
Intake and exhaust camshafts, and heavy duty valve springs. Camshaft pulleys (where pictured) are an option (Sold separately). | $951.27 |
![]() | JUN Stage 2 Camshaft Kit (Camshafts and Camshaft Kits) -1033M-F005 | ![]() |
Intake and exhaust camshafts, heavy duty valve springs, and Type 1 titanium valve retainers. Camshaft pulleys (where pictured) are an option (Sold separately). | $1,278.76 |
![]() | JUN Stage 2R Camshaft Kit (Camshafts and Camshaft Kits) -1033M-F007 | ![]() |
Intake and exhaust camshafts, heavy duty valve springs, and Type 2 titanium valve retainers. Camshaft pulleys (where pictured) are an option (Sold separately). | $1,380.12 |
![]() | TOMEI PROCAM Camshaft (Camshafts and Camshaft Kits) -142201 | ![]() |
$499.03 |
![]() | TOMEI PONCAM Camshaft Kit (Camshafts and Camshaft Kits) -143060 | ![]() |
PONCAM Intake and exhaust camshafts. | $857.70 |
![]() | HKS Connecting Rod Set (Connecting Rods and Parts) -23004-AF001 | ![]() |
$920.08 |
![]() | JUN Super Connecting Rods (Connecting Rods and Parts) -1002M-F002 | ![]() |
SCM440 I Beam connecting rods. | $1,029.25 |
![]() | TODA I Section Heavy Duty Conrods More Info (Connecting Rods and Parts) -13210-EJ2-5T0-I x 4 | ![]() |
$1,559.46 |
![]() | TOMEI Forged H-Beam Conrod Kit (Connecting Rods and Parts) -125008 | ![]() |
  | $686.16 |
![]() | CUSCO Clear Timing Belt Cover (Covers) -6A1 039 A | ![]() |
$396.29 |
![]() | LAILE Beatrush Pulley Cover (Covers) -S146016PCA | ![]() |
Aluminium. | $45.18 |
![]() | TOMEI EJ22 Forged Billet 4 Counter Weight Crankshaft (Crankshafts) -121034 | ![]() |
$4,359.16 |
![]() | TOMEI EJ22 Forged Full Counter Weight Crankshaft (Crankshafts) -121033 | ![]() |
$1,056.77 |
![]() | CUSCO Heavy Duty Engine Mounts (Engine Mounts) -660 911 SET | ![]() |
Include brackets. | $202.91 |
![]() | CUSCO Heavy Duty Pitching Stopper (Engine Mounts) -6A1 911 PS | ![]() |
Suppresses the forwards and backwards movement of the engine and transmission assembly, improving traction. High quality billet aluminium with metal collar (Engine side, press fitted), and rubber bush (Body/bulkhead side, press fitted). | $85.50 |
![]() | STi Cross Member Cushion Rubber Set (Engine Mounts) -ST410224S030 | ![]() |
$16.51 |
![]() | STi Engine Mount Set (Engine Mounts) -ST4100055110 + ST4100055120 | ![]() |
$57.79 |
![]() | STi Pitching Stopper (Engine Mounts) -ST410404S000 | ![]() |
$26.42 |
![]() | STi Transmission Mount (Engine Mounts) -ST4100055200 | ![]() |
$41.28 |
![]() | 5 Zigen Pro Racer Header (Exhaust Manifolds (NA) / Headers) -BNIEX01-P | ![]() |
SUS304. | $974.66 |
![]() | Fujitsubo Super EX BASIC VERSION (Exhaust Manifolds (Turbo)) -610-63032 | ![]() |
$1,013.65 |
![]() | HKS Stainless Steel Exhaust Manifold (Exhaust Manifolds (Turbo)) -1419-RF001 | ![]() |
Pulls out potential power from turbocharged engine. The best solution to reduce primary exhaust gas pressure and supply smooth exhaust gas. Shape, diameter of pipes and production quality of exhaust manifold between engine and turbine affect performance of turbine. HKS Exhaust Manifolds were developed with know-how and data from long time development experience of turbo technologies. Diameter and bending of pipes is designed for each engine. Welds between flanges and pipes are flattened to reduce friction of exhaust gas. As a result, response of the turbocharger at middle and high rpm range is improved. Both torque and horsepower are also increased. | $693.96 |
![]() | MAXIM WORKS Exhaust Manifold (Exhaust Manifolds (Turbo)) -1100FE056 | ![]() |
$1,486.08 |
![]() | TOMEI EXPreme Exhaust Manifold (Exhaust Manifolds (Turbo)) -193082 | ![]() |
$896.69 |
![]() | TRUST GReddy Sus. Turbo Ex. Manifold (Exhaust Manifolds (Turbo)) -10561002 | ![]() |
Stainless steel turbo exhaust manifold. Design layout with runners as close equal length within the space constraints of the of the engine bay, optimising turbo efficiency. Main pipe diameter and the waist gate line diameter are designed to efficiently spool the turbo. | $638.46 |
![]() | Zero Sports Exhaust Manifold (Exhaust Manifolds (Turbo)) -0514005 | ![]() |
$1,307.20 |
![]() | SARD Jet Pump Killer (Fuel Other) -58303 | ![]() |
Allows for steady fuel flow caused by insufficient capacity of standard jet pump after upgrading to larger capacity fuel pumps. | $109.16 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | ![]() |
$241.99 |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | ![]() |
$195.21 |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | ![]() |
DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | ![]() |
$495.36 |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | ![]() |
$454.08 |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | ![]() |
$5.87 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | ![]() |
$272.91 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | ![]() |
Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $79.39 |
![]() | STi Fuel Pump and Filter Assembly (Fuel Pumps) -ST420214S010 | ![]() |
$366.02 |
![]() | STi Fuel Pump Assembly (Fuel Pumps) -ST420214S000 | ![]() |
$435.73 |
![]() | TOMEI Fuel Pump (Fuel Pumps) -183020 | ![]() |
When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. This 255L/h fuel pump is often adequate to suit most engines for the desired power increase that most end users are after. This pump is quiet, and doesn't require much electrical power. An effective budget performance fuel pump. | $166.04 |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | ![]() |
Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $131.91 |
![]() | HKS Fuel Regulator Adapter (Fuel Regulators) -14007-AK002 | ![]() |
Adapter for connecting AN#6 fitting to standard fuel delivery pipe (rail). Finished in blue alumite. For use with HKS Adjustable Fuel Regulator (Sold separately). Includes O Rings. | DISCONTINUED |
![]() | SARD Fuel Regulator Adapter and Adapter Nipple (Fuel Regulators) -SRA06 69026 + SRB01 69020 | ![]() |
For attachment of SARD fuel regulators to standard fuel delivery pipe. | $45.96 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | ![]() |
52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | ![]() |
Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $119.25 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | ![]() |
Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $228.42 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | ![]() |
Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $51.42 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | ![]() |
0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | ![]() |
50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $150.44 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | ![]() |
33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $103.66 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | ![]() |
$232.36 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | ![]() |
Mount bracket. | $47.88 |
![]() | Apex APEXi Head Gasket (Gaskets) -814-F001 | ![]() |
Provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory headgasket. APEXi recommends replacing the factory headgasket with a metal one before gasket failure causes more damage to the engine. The gaskets are all designed engine specific and provide a complete and secure seal. | $200.90 |
![]() | TOMEI Head Gasket (Gaskets) -1361935071 | ![]() |
$236.21 |
![]() | CUSCO Turbo Heat Shield (Heat Shields and Heat Wrap (Bandages)) -667 045 A | ![]() |
SUS. | $59.08 |
![]() | CUSCO Turbo Heat Shield and Hose Set (Heat Shields and Heat Wrap (Bandages)) -667 045 B | ![]() |
SUS. | $82.47 |
![]() | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900535 | ![]() |
High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | $132.83 |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | ![]() |
Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | ![]() |
Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | ![]() |
Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | CUSCO Direct Ignition Coils (Ignition System Parts) -00B 728 F4 | ![]() |
Heavy duty standard replacement direct ignition coil set. Provides stable spark in high boost/high rpm applications. | $662.77 |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | ![]() |
"CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $131.36 |
![]() | HKS Super Fire Racing Coil (Ignition System Parts) -43005-AF001 | ![]() |
Ignition coils with improved ignition energy. Increased ignition energy improves flame kernel formation and its growth, increasing flame propagation and engine combustion efficiency. Combustion is improved from the moment engine starts. Idling, low to middle rpm range efficiency is improved as well. Increased secondary voltage retains perfect engine combustion even in high rpm and high boost conditions. Features: Direct fit easy installation. Improved combustion in high rpm, high boost. Better engine start, stable low rpm, and idling. Improved ignition for circuit driving and other heavy-duty application. Improved stability, idling stability, response, and combustion efficiency. Provides reliable ignition and improves combustion even in rich fuel mixture like 9.5 A/F. Current limit control prevents ignition coil from damage that might be caused by an overcurrent caused by ECU error. Recommended for use with HKS SUPER FIRE RACING PLUG series (Sold separately). | $506.83 |
![]() | HKS Twin Power TYPE-DLI II (Ignition System Parts) -43001-AF002 | ![]() |
Car specific kit. | DISCONTINUED |
![]() | mature HIGHSPARK Ignition Coil (Ignition System Parts) -(GL)ENIP-MAU-SUB-02 | ![]() |
Specially tuned ignition coils with modified coil design that raises the secondary voltage output. By outputting a high and stable secondary voltage, engine quietness, increased torque and response idle/low rpm, and high output during acceleration. | $297.77 |
![]() | OKADA Projects Plasma Direct (Ignition System Parts) -SD244011R | ![]() |
Ignition coil with a built in high power amplifier. Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Plug and play installation. Compatible with OBD-II (On-Board-Diagnostics). | $701.76 |
![]() | OKADA Projects Plasma Spark (Ignition System Parts) -SP244002R | ![]() |
Plasma Spark is an ignition tuning part that can increase ignition energy by adding a capacitor component (capacitance) to the plug boot that transmits the high voltage generated by the direct ignition coil to the spark plug. Since the capacity discharge current at the beginning of discharge is increased, the torque at low and medium speeds is increased to support comfortable driving. In addition, it is possible to prevent voltage drop in the high speed range and achieve smooth jumping from the middle speed to the high speed range. | $313.73 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | ![]() |
DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | ![]() |
DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type V (Ignition System Parts) -VS-V | ![]() |
DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | ![]() |
DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | ![]() |
DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | ![]() |
Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | ![]() |
Voltage stabiliser. | DISCONTINUED |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | ![]() |
DISCONTINUED |
![]() | HKS 650cc Injector (Injectors) -14002-AF002 | ![]() |
$93.57 |
![]() | HKS 800cc Injector (Injectors) -14002-AF001 | ![]() |
$93.57 |
![]() | HKS Fuel Upgrade Kit (Injectors) -14007-AF003 | ![]() |
$759.55 |
![]() | Power Enterprise 510cc Injector (Injectors) -TH510F | ![]() |
DISCONTINUED |
![]() | Power Enterprise 650cc Injector (Injectors) -TH650F | ![]() |
DISCONTINUED |
![]() | Power Enterprise 800cc Injector (Injectors) -TH800F | ![]() |
DISCONTINUED |
![]() | SARD 650cc Injector (Injectors) -63580 | ![]() |
$115.58 |
![]() | SARD 800cc Injector (Injectors) -63581 | ![]() |
DISCONTINUED |
![]() | SARD Injector Kit (Injectors) -63847 | ![]() |
Kit including injectors and all parts required for bolt installation to standard fuel delivery pipe. | $561.41 |
![]() | SARD Oil Catch Tank (Oil Breather Tanks) -29283 | ![]() |
Oil catch (breather) tank kit. | $115.68 |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | ![]() |
Universal kit. 1000ml. | $93.84 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | ![]() |
Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | ![]() |
Hose for use with TRUST GReddy Breather Tanks. | $15.87 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | ![]() |
Universal kit. 680ml. | $84.49 |
![]() | Blitz Racing Oil Filter (Oil Filters) -18708 (B-8202) | ![]() |
A high-performance oil filter that Blitz has worked on, with a proven track record in filters for air cleaners. Durability above regulation level in JIS impulse durability tests. Designed exclusively for maximizing filtration performance of the filter itself. By increasing the filter strength, it corresponds to the high standard among all load conditions. | $20.92 |
![]() | HKS Oil Filter (Oil Filters) -52009-AK005 | ![]() |
New concept oil filter improves oil pressure drop and flow properties. The oil pressure drop and flow properties are improved by approximately 30% compared to current sports oil filters. The stress on the engine is reduced for better engine response. Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance. HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines. Filter replacement is recommended every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace filters every 3,000 km ~ 5,000km. | DISCONTINUED |
![]() | Monster Sport Power Filter PFX100 High Performance Oil Filter (Oil Filters) -68MT | ![]() |
Power Filter PFX100 is a performance filtered derived from engine development engineers after research and development. Oil pressure drop reduced to approx 15% while exhibiting the same high dirt collection performance as a normal filter. It stabilizes the hydraulic pressure even in the harsh sports driving scene and contributes to engine protection. | $29.72 |
![]() | Monster Sport Power Filter Ti-100 (Oil Filters) -68MM | ![]() |
Titanate Fiber Oil Filter. | DISCONTINUED |
![]() | PROVA Engine Oil Filter (Oil Filters) -10000EP0010 | ![]() |
Uses a density filter and ensures a stable filter paper area. Adjusting filter folds at regular intervals prevents adhesion and bias between filter paper. By creating a smooth oil flow path, efficient and stable filter performance is acheived. | $25.69 |
![]() | PROVA Oil Level Gauge Holder (Oil Other) -93000AH0200 | ![]() |
Level gauge holder prevents the dip stick from working its way out of the holder tube. Also serves as an engine bay accent. Black anodized aluminum. | $26.60 |
![]() | PROVA Oil Separator (Oil Other) -50000TK0012 | ![]() |
DISCONTINUED |
![]() | JUN Baffled Oil Pan (Oil Pans (Sumps) and Baffle Plates) -1035A-F001 | ![]() |
$366.02 |
![]() | TOMEI Baffle Stiffner (Oil Pans (Sumps) and Baffle Plates) -193036 | ![]() |
Stiffen up the crank case and optimize the oil lubrication! | $298.59 |
![]() | JUN High Flow Oil Pump (Oil Pumps) -1013M-F001 | ![]() |
JUN developed high flow oil pumps for the engines which may lack of oil supply when operating at high revolution. Lack of oil becomes a serious problem in tuned engines, so the new gears in the oil pumps increase flowing oil quantity. | $764.14 |
![]() | TOMEI High Performance Oil Pump for EJ (Oil Pumps) -194013 | ![]() |
High volume performance oil pump for EJ20/EJ25 engines. | $998.06 |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEOTS001 | ![]() |
0W-20 SL/CF. 4 litres. | $98.15 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEOTS002 | ![]() |
5W-30 SL/CF. 4 litres. | $98.15 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEOTS003 | ![]() |
10W-40 SL/CF. 4 litres. | $98.15 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEOTS004 | ![]() |
15W-50 SL/CF. 4 litres. | $98.15 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | ![]() |
Power steering fluid tank. | DISCONTINUED |
![]() | HKS Forged Piston Kit (Piston Kits and Parts) -21003-AF002 | ![]() |
$1,114.56 |
![]() | HKS Piston Pin Set (Piston Kits and Parts) -21005-AF001 | ![]() |
Piston pin (and circlip) set for overhaul use. | $198.14 |
![]() | JUN C Series Super Piston Kit (Piston Kits and Parts) -1001M-F004 | ![]() |
JUN designed piston kit, manufactured by Cosworth. Refined shape and piston profile for high rigidity, while being lightweight. High boost, high response, high revolution has been made possible. Special aluminum material, forged by 400 ton press, for greater durability. | $1,247.57 |
![]() | TODA High Power Profile Piston Kit (Piston Kits and Parts) -13030-EJ2-0T0 | ![]() |
Forged piston kit. | $842.11 |
![]() | TOMEI Forged Piston Kit (Piston Kits and Parts) -1183925312 | ![]() |
Kit includes pistons, piston rings, pins and circlips. | $998.06 |
![]() | TOMEI Forged Piston Kit EJ22 Repair Parts (Piston Kits and Parts) -1181625314 | ![]() |
Parts for repair/overhaul of TOMEI Forged Piston Kit. | $258.60 |
![]() | TRUST GReddy Forged Piston Set (Piston Kits and Parts) -13565800 | ![]() |
DISCONTINUED |
![]() | CUSCO Aluminium Pulley Kit (Pulleys) -6A1 733 A | ![]() |
Lightweight pulleys create less stress on the engine, resulting in better acceleration. CUSCO blue lightweight aluminium. | $191.45 |
![]() | LAILE Alternator Pulley (Pulleys) -S96010PB | ![]() |
Duralumin A7075. | DISCONTINUED |
![]() | LAILE Crank Pulley (Pulleys) -S96010PA | ![]() |
Duralumin A7075. | DISCONTINUED |
![]() | NEOPLOT Crank Pulley NEO (Pulleys) -NP10110P | ![]() |
Lightweight crank pulley. Over a third lighter than the standard item. Duralumin with alumite finish. | $194.93 |
![]() | JUN Reinforced Head Bolts (Reinforced Bolts) -1027M-F001 | ![]() |
$672.86 |
![]() | TOMEI Head Stud Set (Reinforced Bolts) -193112 | ![]() |
$304.10 |
![]() | TOMEI Main Bolts (Reinforced Bolts) -193113 | ![]() |
$615.99 |
![]() | HKS EJ20 2.2L Kit (Stroker Kits) -21004-AF002 | ![]() |
Provides torque improvement for the mid speed range of rthe EJ20 engine. Nickel plated 92.5mm forged pistons were specifically designed for this kit while the billet cranshaft increases stroke. Broadens the tuning scope of the standard EJ20 engine. Suitable for use with standard conrods. | $3,898.66 |
![]() | TOMEI EJ22KIT (Stroker Kits) -252007 | ![]() |
$3,103.33 |
![]() | TOMEI EJ22KIT Competition Model (Stroker Kits) -221047 | ![]() |
DISCONTINUED |
![]() | JUN GT Surge Tank (Throttle Bodies and Intake Parts) -2015A-F001 | ![]() |
Intake Plenum. | $2,570.82 |
![]() | TOMEI Impreza 4 Throttle System (Throttle Bodies and Intake Parts) -193046 | ![]() |
Quad throttle intake manifold. The Tomei 4 throttle system incorporates 4 throttle bodies and larger intake plenum for amazing response and increased power. Designed for large power and response of 500HP. Very thin light weight casting manufactured in Japan. Designed with emphasis on equal air distribution. | DISCONTINUED |
![]() | HKS GT II Sports Turbine Kit (Turbocharger Kits) -11004-AF011 | ![]() |
$1,684.22 |
![]() | HKS GT-RS Sports Turbine Kit (Turbocharger Kits) -11004-AF001 | ![]() |
DISCONTINUED |
![]() | TOMEI ARMS Replacement Kit (Turbocharger Kits) -1741S00010 | ![]() |
Overhaul use. Includes all parts required for installation of TOMEI turbocharger(s) to standard setup. | $102.65 |
![]() | TOMEI ARMS Turbine Kit (EJ Single Scroll) (Turbocharger Kits) -173016 | ![]() |
$1,309.95 |
![]() | TRUST GReddy Turbo Kit (Actuator Type) (Turbocharger Kits) -11560005 | ![]() |
Built in actuator type turbo kit for users who are not satisfied with only increasing boost with the standard turbo(s). Utilising the standard exhaust manifold, after bolt on replacement of the standard turbo(s) and adjusting air-fuel ratio and ignition timing, user can feel best combination of power and torque. Kits includes parts required for installation, without need for modification (some parts may require small adjustments) allowing for simple installation. | DISCONTINUED |
![]() | TRUST GReddy Turbo Kit (Wastegate Type) (Turbocharger Kits) -11560006 | ![]() |
Full external wategate type turbocharger kit. High grade product for customer who wants ideal engine tuning. Using a special stainless steel exhaust manifold and intake piping to suit the redesigned layout. Piping modifications are not necessary (some models may require slight adjustments). This kit is intended for full-fledged engine tuning for use in conjunction computer tuning, high-performance intercooler, and other supporting engine parts (Not included). | $2,923.99 |
![]() | HKS Turbine Support Pipe (Turbocharger Outlets and Parts) -14011-AF001 | ![]() |
Turbo support pipe (Up-pipe). Improves efficiency of turbine support pipe, which is installed between exhaust manifold and turbocharger of Subaru Impreza models. Turbine response is improved, and increases horsepower across the entire rpm range. Recommended to use with HKS Stock Replacement Stainless Exhaust Manifold (Sold separately). | $132.55 |
![]() | JUN Turbine Adapter (Turbocharger Outlets and Parts) -5005A-F001 | ![]() |
This adapter is for use of TD05/06 (Wastgate type). Intercooler relocation and piping will need to be made to suit exact turbo/layout. | $374.27 |
![]() | TRUST Subaru Turbine Joint Pipe (Turbocharger Outlets and Parts) -11960000 | ![]() |
Up pipe. | $90.27 |
![]() | Zero Sports Turbine Support Venturi (Turbocharger Outlets and Parts) -0515003 | ![]() |
Turbo support (Up Pipe). | DISCONTINUED |
![]() | JUN Heavy Duty Actuator (Wastegates and Actuators) -2011A-F003 | ![]() |
Uprated turbo actuator which can adjust working pressure from 1.0 to 1.3 kgf/cm2. This turbo actuator will prevent the declining of boost pressure at high rev and boost. Bolt-on installation to standard turbocharger. | $270.15 |
![]() | PROVA Adjustable Actuator (Wastegates and Actuators) -50220BL0020 | ![]() |
$349.50 |
![]() | EXEDY Hyper CARBON-R Overhaul Kit (Clutch Overhaul Kits) -OH60 | ![]() |
$2,046.20 |
![]() | OS Giken GT1CD Overhaul Kit (Clutch Overhaul Kits) -(GL)GT1CD-OHB | ![]() |
$660.48 |
![]() | OS Giken GT2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)GT2CD-OHB | ![]() |
$811.84 |
![]() | OS Giken GTS2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)GTS2CD-OHB | ![]() |
$811.84 |
![]() | OS Giken R3C Overhaul Kit (Clutch Overhaul Kits) -(GL)R3C-OHA | ![]() |
$791.20 |
![]() | OS Giken STR2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)STR2CD-OHA | ![]() |
$516.00 |
![]() | OS Giken TR2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)TR2CD-OHA | ![]() |
$516.00 |
![]() | ATS Wedge Collar (Clutch Parts) -R7A1D-12 (Old: R7A1D-10) | ![]() |
Heavy duty wedge collar. - Reduces chances of dropout caused by violent pedal operation. - Unique lock shape that enables smooth detachment and strong lock while maintaining compatibility with genuine item. - Stability and clutch lock durability maintained since the entire circumference of the bearing is secured. - High wear resistance due to increased surface hardness (nitride treated). - Since the slit portion serves as a guide for operation, reliable removal work can be performed. Included with ATS Carbon Blade Clutches. | $43.76 |
![]() | ATS Carbon NC-PULL Clutch (Twin Plate) (Clutches) -NCS23220 R7A62N-12 (Old: NCZ23220) | ![]() |
NC-PULL (No Conversion-Pull) clutch. Does not require pull->push conversion. For use with standard or standard replacement type clutch covers (Not included). Special pressure plate under the stock clutch cover to assure proper friction and abrasion characteristics. Twin plate rated to ~700PS*. Single plate rated to ~350PS*. * When used with aftermarket clutch covers with clamping force greater than 1100Kg. Recommended for use with new clutch covers. Used clutch covers can still be used as long as distortion/wear is within 0.3mm. For racing applications, ATS recommends using their standard carbon or metal clutches with an ATS clutch cover. | DISCONTINUED |
![]() | EXEDY Single Sports Series Clutch Cover (Clutches) -FC04T | ![]() |
$270.06 |
![]() | EXEDY Single Sports Series Clutch Disc (Clutches) -FD08H | ![]() |
$218.69 |
![]() | EXEDY Single Sports Series Clutch Set (Clutches) -FK01HA | ![]() |
Disc and cover set. Approximately 40% higher clamp load than the standard clutch. | $528.66 |
![]() | EXEDY Single Sports Series Flywheel (Clutches) -FF01 | ![]() |
$349.32 |
![]() | EXEDY Hyper CARBON-D (Twin) (Clutches) -FM012SDMC1 | ![]() |
Damper type discs. Silent type hub. Carbon clutches offer excellent operational feel by reducing inertia. Unique damper design significantly reduces shock torque and gearbox rattle. The highest possible performance with the same ease of use as the original equipment clutch. SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 20 to 30% reduction in inertia vs OEM. Suitable for: Street Modified / Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper CARBON-R (Triple) (Clutches) -FM023SBMC1 | ![]() |
Damperless (centre hub) type discs. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper CARBON-R (Twin) (Clutches) -FM012SBMC1 | ![]() |
Damperless (centre hub) type discs. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper COMPE-D (Twin) (Clutches) -FM012SDL | ![]() |
Lightweight model. Damper type discs. The Compe-D damper absorbs shock torque, protecting the drive system. The combination of a lightweight forged aluminium clutch cover and ultra-light drilled chromium-molybdenum flywheel allows the Compe-D to achieve the lowest possible weight. The centre plate with grooves provides improved disc release for better disengagement at any rpm. The 6-PAD disc design ensures low weight and low inertia, contributing to faster shift response. 20 to 30% reduction in inertia vs OEM. Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper COMPE-R (Twin) (Clutches) -FM012SBL | ![]() |
Lightweight model. Damperless (centre hub) type discs. Lightweight and low inertia drive boss and chromium molybdenum flywheel. Thinner centre plates improve the disengagement under high rotation. Lightweight and low inertia clutch plates with optimized metal button configuration improve shift feel and direct engagement characteristics, reducing shifting time lag. A longer spline hub is utilized, reducing surface pressure on the transmission input shaft teeth subsequently reducing wear on the shaft. Conventional clutch discs disengage by sliding on the input shaft. The centre hub design, improves disengagement response. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper MULTI (Twin) (Clutches) -FM012SD | ![]() |
Self-levelling intermediate plate design reduces gearbox rattle and increases the disengagement performance (PAT.). Unique intermediate plate design increases heat resistance which improves clutch life. 20 to 30% reduction in inertia vs OEM. Suitable for: Street Modified / Track day / Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper SINGLE (Clutches) -FH01SD | ![]() |
Damper type metal disc. Includes flywheel. Durability is improved with the use of a stronger, smaller damper disc, specifically redesigned for the Hyper Single. A lower level of inertia is achieved over the genuine fitment clutch which improves shift response for faster gear changes. 20 to 30% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper SINGLE VF (Clutches) -FH01SDV | ![]() |
Various Friction. Metal and Organic (Ultra Fiber) damper type disc. Includes flywheel. Capable of handling a high torque capacity without sacrificing the feel of a standard clutch. Combination of cerametallic & organic friction facings allows for high heat durability. Unique cushioning plate design reduces pedal effort by 12% vs Hyper Single. 20 to 30% reduction in inertia vs OEM. 225mm disc models rated to 500Nm (approx 370 ft lbf). 200mm disc models rated to 300Nm (approx 220 ft lbf). Suitable for: Street Modified / Track day. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $1,129.05 |
![]() | HKS LA Clutch More Info (Clutches) -26010-AF001 | ![]() |
HKS LA Clutch (Light Action) combines accurate high level power transfer from engine to transmission, while offering easy to use clutch feel which is particularly noticeable when the clutch is half engaged. Suitable for use on the streets or for sports use, LA Clutch is a single plate clutch which can support approximately 450ps (pull type models). HKS LA Clutch is a complete set including clutch disc, cover and flywheel. The newly designed "MG Composite disc" developed to reduce juddering, enables the same driving feel as the stock clutch, yet with the capability of handling more power. The disc damper also reduces impact and strain on drive train parts. Single plate clutch. | $998.06 |
![]() | HKS LA Clutch Twin More Info (Clutches) -26011-AF001 | ![]() |
The tuning expert HKS provides the clutch system for streets and sports use. Capable torque, pedal effort, and semi-engagement range are closely examined for various driving situations. Despite supporting approximately 700ps, the main concept for the Twin Plate LA Clutch remains the same. Using "MG Composite Discs" to reduce judder and achieve better driving feel compare to stock clutch. Disc dampers are used to reduce gear noise and protect the transmission from shock torque. The LA Twin also has a "Pivot Ring" within the pressure plate to offer partial engagement like no other twin plate clutch. Twin plate clutch. | $1,699.81 |
![]() | JUN Single Sports Clutch Kit (Clutches) -2511M-F003 | ![]() |
Lightweight flywheel, clutch disc and heavy duty clutch cover kit. | $764.14 |
![]() | ORC Metal Series ORC-559 (Clutches) -ORC-559-03S | ![]() |
Twin Plate Clutch. ~630N/m(65kgf/m). | $1,575.06 |
![]() | OS Giken Fitting Kit (Clutches) -(GL)DTCLOSG-WRXB-TR2CD-FITKIT | ![]() |
Movement alteration kit. Pull to push conversion kit. For fitting of OS Giken multi plate clutches (Where not included). Push rod, release hook, release sleeve, release bearing and other miscellaneous parts required for fitting. | $275.20 |
![]() | OS Giken Grand Touring (Street Master) GT1CD (Mono Metal Hard) (Clutches) -(GL)DTCLOSG-WRXB-GT1CD | ![]() |
Street Master Hard cover. This is a clutch model designed for those who don't really drive aggressively, yet make a ton of power. A lot of "show car builds with a lot of power" like this clutch as it is designed to be easier to slip and drive everyday. The caveat being increased wear when used in an aggressive manner like track, drift, or autocross. For dual purpose applications, the STR series is highly recommend. Single plate. Damper type 215mm disc. ~430PS. | $1,218.22 |
![]() | OS Giken Grand Touring (Street Master) GT2CD (Twin Metal Hard) (Clutches) -(GL)DTCLOSG-WRXB-GT2CD | ![]() |
Street Master Hard cover. This is a clutch model designed for those who don't really drive aggressively, yet make a ton of power. A lot of "show car builds with a lot of power" like this clutch as it is designed to be easier to slip and drive everyday. The caveat being increased wear when used in an aggressive manner like track, drift, or autocross. For dual purpose applications, the STR series is highly recommend. Twin plate. Damper type 215mm discs. ~700PS. | $1,467.73 |
![]() | OS Giken Grand Touring (Street Master) GTS2CD (Twin Metal Soft) (Clutches) -(GL)DTCLOSG-WRXB-GTS2CD | ![]() |
Street Master Soft cover. This is a clutch model designed for those who don't really drive aggressively, yet make a ton of power. A lot of "show car builds with a lot of power" like this clutch as it is designed to be easier to slip and drive everyday. The caveat being increased wear when used in an aggressive manner like track, drift, or autocross. For dual purpose applications, the STR series is highly recommend. Twin plate. Damper type 215mm discs. ~500PS. | $1,467.73 |
![]() | OS Giken R3C More Info (Clutches) -(GL)DTCLOSG-WRXB-R3C | ![]() |
R series clutch kits are power holding monsters. Often found in professional level drift applications as they handle all the heat and abuse that drift has to offer. Also used in serious drag race applications for its relative ease of use and slip. The center hub is separate from the clutch discs to provide more reliability and integrity to the clutch system. By focusing all the energy through the floating hub, reliability is increased while and clutch hub failures often found in other brands are decreased (at the same amount of torque). Centre hub, aluminium cover. Triple (3) plate. 215mm discs. 10,700N/m (1,100kgf/m). For applications with less than 1100 lb/ft (1491 N/m, 152 kg/m) of torque. | $1,362.24 |
![]() | OS Giken STR2CD (Clutches) -(GL)DTCLOSG-WRXB-STR2CD | ![]() |
STR series clutch is a dual purpose type clutch that a lot of customers love. This clutch is ideal for applications that see occasional track day or autocross use. Really soft in pedal pressure for ease of drive-ability. Not designed for drift use (TS series recommended). Aluminium cover. Twin plate push type. Damper type 215mm discs. | $1,327.84 |
![]() | OS Giken TR2CD More Info (Clutches) -(GL)DTCLOSG-WRXB-TR2CD | ![]() |
TR Series clutch lineup is designed for track or drift dedicated applications. This clutch can handle a lot of abuse while providing a fairly standard pedal pressure. Aluminium cover. Twin plate push type. Damper type 215mm discs. 10,700N/m (1,100kgf/m). For applications with less than 750 lb/ft (1016 N/m, 103 kg/m) of torque. | $1,121.44 |
![]() | STi DCCD Overhaul Kit (Differential Overhaul Kits and Parts) -390004S010 | ![]() |
DISCONTINUED |
![]() | STi LSD Overhaul Kit (Differential Overhaul Kits and Parts) -ST390004S000 | ![]() |
$320.97 |
![]() | CUSCO Diff Cover Fitting Kit (Differential Parts) -(GL)SUB-38354AA020 + 38353AA050 | ![]() |
$10.03 |
![]() | CUSCO Volume Up Diff Cover (Differential Parts) -692 008 AS | ![]() |
$530.22 |
![]() | STi Rear Diff Case Cover (R180) (Differential Parts) -ST383164S010 | ![]() |
DISCONTINUED |
![]() | CUSCO LSD Type MZ More Info (Differentials) -LSD 180 A | ![]() |
LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $770.56 |
![]() | CUSCO LSD Type RS More Info (Differentials) -LSD 180 F | ![]() |
RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $770.56 |
![]() | CUSCO Tarmac Gear (Differentials) -665 020 A | ![]() |
Torque Split F: 35%, R: 65%. | DISCONTINUED |
![]() | KAAZ LSD (Differentials) -DBF2015 | ![]() |
Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $726.53 |
![]() | OS Giken Super Lock LSD Spec-S (Differentials) -D-SUA101081404-S | ![]() |
The OS Super Lock LSD is the culmination of over four years of extensive research and development leading to a revolutionary LSD design. With the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and combined with the patented lock timing system, the Super Lock LSD is able to achieve complete lock in a progressive, smooth, and quiet manner. This translates to quick, repeatable lap times, and performance. | $1,115.02 |
![]() | OS Giken Super Lock LSD Spec-X (Differentials) -D-SUA101081404-X | ![]() |
Full order type. 1.1, 1.5 or 2 way. Lock timing, initial torque can be customised. The OS Super Lock LSD is the culmination of over four years of extensive research and development leading to a revolutionary LSD design. With the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and combined with the patented lock timing system, the Super Lock LSD is able to achieve complete lock in a progressive, smooth, and quiet manner. This translates to quick, repeatable lap times, and performance. | $1,122.81 |
![]() | STi Centre Diff Assembly (Lock) (Differentials) -ST3891355010 | ![]() |
DISCONTINUED |
![]() | STi Centre Viscous LSD (Differentials) -ST3891355000 | ![]() |
DISCONTINUED |
![]() | STi Front Mechanical LSD (Differentials) -ST3841044010 | ![]() |
DISCONTINUED |
![]() | STi Rear Mechanical LSD (Differentials) -ST3841066000 | ![]() |
DISCONTINUED |
![]() | CUSCO Driveshaft Heat Shield (Driveshafts) -6A1 047 R | ![]() |
Reduces chances of drive shaft trouble by blocking heat from exhaust, decreasing the effectiveness of the grease inside the inner joint. In the case where the drive shaft boot is broken, grease is less likely to adhere to the exhaust, preventing secondary problems from arising. | $56.14 |
![]() | Pleasure Racing Service Heavy Duty Driveshaft (Driveshafts) -WSB601 | ![]() |
Billet chromoly. | $898.98 |
![]() | STi Heavy Duty Drive Shaft Assembly (Driveshafts) -283214S000 x 2 | ![]() |
DISCONTINUED |
![]() | JUN Light Weight Flywheel (STD) (Flywheels) -2001M-F002 | ![]() |
The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $327.49 |
![]() | CUSCO Heavy Duty Stabilizer Link (Anti Roll (Sway/Stabiliser) Bars) -667 318 A | ![]() |
$52.47 |
![]() | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -667 311 A21 | ![]() |
Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $144.20 |
![]() | CUSCO BCS More Info (Brake Cylinder Stoppers) -666 561 A | ![]() |
Brake cylinder stopper (BCS). Suppresses bulkhead deflection that occurs when applying brakes by reinforcing the brake master cylinder. Provides for more direct braking feel. For right hand drive models. | $74.49 |
![]() | CUSCO BCS Mount Bracket More Info (Brake Cylinder Stoppers) -667 54B AL | ![]() |
Strut tower bar (brace) mount bracket with integrated brake cylinder stopper (BCS). For use with CUSCO Strut Tower Bars not already equipped with brake cylinder stopper (Sold separately). | $58.89 |
![]() | CUSCO Heavy Duty Brake Pedal Plate (Brake Cylinder Stoppers) -667 486 A | ![]() |
Brake pedal brace. Improves brake pedal touch and controlability. Plate reinforces the bracket, suppressing deflection at time of braking. Suitable for use in conjunction with CUSCO BCS (Sold separately) for even further brake feel. Bolt on installation. | $144.20 |
![]() | Garage Vary Universal Brake Duct Spoiler (Brake Ducts and Ducting) -30-4002 | ![]() |
Universal brake duct cooling air guides. Require modifications for fitting. | $95.68 |
![]() | J Speed Brake Cooling Deflector Kit (Brake Ducts and Ducting) -300006 | ![]() |
$175.21 |
![]() | PROVA Carbon Brake Air Guide (Brake Ducts and Ducting) -80000FD0101 | ![]() |
DISCONTINUED |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | ![]() |
Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $27.06 |
![]() | APP Brake Line System (Brake Lines) -SB008-ST | ![]() |
$157.87 |
![]() | ENDLESS Brake Lines (Swivel Racing Type) (Brake Lines) -EB704 | ![]() |
Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $216.72 |
![]() | Project μ (Mu) Teflon Brake Lines (Brake Lines) -BLF-002AC | ![]() |
Teflon hose, covered with stainless mesh hose, and PVC outer tube. | $182.18 |
![]() | Project μ (Mu) Upgrade Piston Kit (Brake Overhaul Kits) -UGP-S406 | ![]() |
Aluminium alloy, Cashima coated (alumite) pistons and seal kit. | DISCONTINUED |
![]() | DIXCEL RGM type Side Inner Shoe (Brake Pads) -RGM-3650702 | ![]() |
Side (hand brake) inner shoes for gymkhana, dirt trial, rally, drift applications. Through thorough repeated tests with actual cars, the materials used in this inner shoes offer excellent initial braking. Excellent initial braking makes spin turns that you frequently see in gymkhana, dart trials, rallies, drift competitions easy. Non asbestos. | $139.43 |
![]() | ENDLESS CC-A (Brake Pads) -EP351CCA | ![]() |
Street. Ceramic Carbon Metal. 50~480°C. Average friction coefficient: 0.38~0.45. | $127.05 |
![]() | ENDLESS CC-R (Brake Pads) -EP351CCR | ![]() |
Winding road/circuit. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | DISCONTINUED |
![]() | ENDLESS CC-Rg (Brake Pads) -EP351CCRG | ![]() |
Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $177.04 |
![]() | ENDLESS CC-X (Brake Pads) -EP351CCX | ![]() |
Winding road/circuit. Ceramic Carbon Metal. 50~700°C. Average friction coefficient: 0.38~0.50. | DISCONTINUED |
![]() | ENDLESS MX72 (Brake Pads) -EP351MX72 | ![]() |
Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $186.22 |
![]() | ENDLESS NEW Type R (Brake Pads) -EP351TRN | ![]() |
Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | $129.34 |
![]() | ENDLESS NS97 (Brake Pads) -EP351NS97 | ![]() |
Street. Low steel (non-asbestos). 0~500°C. Average friction coefficient: 0.37~0.43. | DISCONTINUED |
![]() | ENDLESS SNP (Brake Pads) -EP351SNP | ![]() |
Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
![]() | ENDLESS SSM (Brake Pads) -EP351SSM | ![]() |
Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | $147.23 |
![]() | ENDLESS SSS (Brake Pads) -EP351SSS | ![]() |
Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $120.17 |
![]() | ENDLESS SSY (Brake Pads) -EP351 SY2 | ![]() |
Super Street Y-Sports. Street. Non asbestos. 0~380°C. Average friction coefficient: 0.38~0.48. | $81.64 |
![]() | ENDLESS Type R (Brake Pads) -EP351TR | ![]() |
Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
![]() | ENDLESS Type SS (Brake Pads) -ES790SS | ![]() |
Competition use side (hand/E) brake shoes. | $114.21 |
![]() | ENDLESS W-003 (Brake Pads) -EP351W003 | ![]() |
Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $264.19 |
![]() | Project μ (Mu) B-SPEC (Brake Pads) -F906-Bspec | ![]() |
Street Sports. Reliable braking power and fade resistance suitable for sports driving, all at a reasonable price. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $123.01 |
![]() | Project μ (Mu) BESTOP (Brake Pads) -F941-BESTOP | ![]() |
Genuine type. Asbestos free. 0~380°C. Friction coefficient: 0.30~0.38. | $59.72 |
![]() | Project μ (Mu) BOOM WAGON (Brake Pads) -F941-BoomWagon | ![]() |
A standard model that compensates for shortages in braking force and provides stable performance. Street. Non steel. 0~450°C. Friction coefficient: 0.36~0.43. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $109.25 |
![]() | Project μ (Mu) CLUBMAN SINTERED (Brake Pads) -F906-ClubmanSintered | ![]() |
Circuit Race. Ideal for clubman racing or amateur endurance racing. Designed for high durability and heat resistance experienced during high load circuit racing. Material: Super alloy sintered. Temperature range: 350~1000°C. Friction coefficient: 0.28~0.35. | $295.01 |
![]() | Project μ (Mu) COMP-B for Gymkhana (Brake Pads) -F906 GYM | ![]() |
Compound dedicated to the gymkhana competition, pursuing the pleasure of freely controlling the vehicle. Competition. Carbon metal. Front: 0~450°C. Friction coefficient: 0.38~0.49. Rear: 0~400°C. Friction coefficient: 0.48~0.60. | $150.53 |
![]() | Project μ (Mu) COMP-B for Gymkhana (Rear Metal) (Brake Pads) -R906-CompBGymRearMetal | ![]() |
Competition. Sintered metal. 0~500°C. Friction coefficient: 0.50~0.62. | DISCONTINUED |
![]() | Project μ (Mu) LEVEL MAX500 (Brake Pads) -F906-LevelMax500 | ![]() |
Circuit Sports. Carbon metal. 0~500°C. Friction coefficient: 0.41~0.47. | DISCONTINUED |
![]() | Project μ (Mu) LEVEL MAX700 (Brake Pads) -F906-LevelMax700 | ![]() |
Circuit Sports. Carbon metal. 50~700°C. Friction coefficient: 0.43~0.51. | DISCONTINUED |
![]() | Project μ (Mu) LEVEL MAX900 (Brake Pads) -F914-LevelMax900 | ![]() |
Discontinued. Circuit Sports. Carbon + Titanium + Ceramic. 0~900°C. Friction coefficient: 0.40~0.60. | DISCONTINUED |
![]() | Project μ (Mu) LEVEL MAX900i (Brake Pads) -F906-LevelMax900i | ![]() |
Circuit Sports. Carbon metal. 100~900°C. Friction coefficient: 0.45~0.60. | DISCONTINUED |
![]() | Project μ (Mu) M SPEC (Brake Pads) -F906-Mspec | ![]() |
Street. Asbestos free. 0~500°C. Friction coefficient: 0.31~0.40. | DISCONTINUED |
![]() | Project μ (Mu) NS-C (Brake Pads) -F906-NSC | ![]() |
Street. Non steel. 0~400°C. Friction coefficient: 0.34~0.38. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $109.25 |
![]() | Project μ (Mu) NS-ZERO (Brake Pads) -F906-NSZero | ![]() |
Street. Asbestos free. 0~400°C. Friction coefficient: 0.32~0.37. | DISCONTINUED |
![]() | Project μ (Mu) RACING 777 (Brake Pads) -F906-R777 | ![]() |
Circuit Race. Carbon metal. 300~800°C. Friction coefficient: 0.40~0.55. | $191.81 |
![]() | Project μ (Mu) RACING 999 (Brake Pads) -F906-R999 | ![]() |
Circuit Race. Carbon metal. 200~800°C. Friction coefficient: 0.42~0.59. | $191.81 |
![]() | Project μ (Mu) RACING SINTERED (Brake Pads) -F906-RacingSintered | ![]() |
Circuit Race. Sintered metal. 350~1000°C. Friction coefficient: 0.35~0.40. | DISCONTINUED |
![]() | Project μ (Mu) RACING-N+ (Brake Pads) -F906-RacingNplus | ![]() |
Circuit Race. Super Graphite Metallic. 100~800°C. Friction coefficient: 0.39~0.48. | $178.05 |
![]() | Project μ (Mu) RACING-N1 (Brake Pads) -F906-RacingN1 | ![]() |
Circuit Race. Carbon metal. 100~800°C. Friction coefficient: 0.33~0.45. | $178.05 |
![]() | Project μ (Mu) Sports Inner SHOE (Brake Pads) -IS900A-SportsInnerShoe | ![]() |
Provides powerful initial braking force for initiation of spin turns and drift. Side (hand) brake pads. Non asbestos. 0~400°C. | DISCONTINUED |
![]() | Project μ (Mu) Type HC+ (Brake Pads) -F914-HC+ | ![]() |
Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. | $164.29 |
![]() | Project μ (Mu) Type HC-CS (Brake Pads) -F906-CS | ![]() |
Hyper Carbon - Circuit Spec. Street Sports. Carbon metal. 50~800°C. Friction coefficient: 0.41~0.50. | $164.29 |
![]() | Project μ (Mu) Type NR (Brake Pads) -F914-NR | ![]() |
Street Sports. Asbestos Free. 0~600°C. Friction coefficient: 0.33~0.43. | DISCONTINUED |
![]() | Project μ (Mu) Type NS (Brake Pads) -F906-NS | ![]() |
Street. Asbestos free. 0~400°C. Friction coefficient: 0.37~0.42. | $109.25 |
![]() | DIXCEL 2 Piece Rotor (Brake Rotors) -FS-32630W72R/73L | ![]() |
Rotors only. | $410.96 |
![]() | DIXCEL 2 Piece Rotor Assembly (Brake Rotors) -FSBS32630W72R/73L | ![]() |
Rotors, bell housings and mounting parts (Assembled). | $698.64 |
![]() | ENDLESS Racing Brake Rotor (Brake Rotors) -ER709-RR x 2 | ![]() |
Pair of 2. ENDLESS blue bell housings. | $1,023.74 |
![]() | Project μ (Mu) SCR (Brake Rotors) -SCRF051 | ![]() |
1 piece type. Straight slit (slotted). 8 per side. High grade alloy FC cast iron. Street and circuit use. Up to 600°C. Pair of 2 (Left and right). | $300.88 |
![]() | Project μ (Mu) SCR PRO (Brake Rotors) -GPRF051 | ![]() |
2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy. Suitable for circuit use. Pair of 2 (Left and right). | $526.18 |
![]() | Project μ (Mu) SCR Pure Plus (Brake Rotors) -SPPF101 | ![]() |
1 piece type. Pair of 2 (Left and right). | $161.45 |
![]() | Project μ (Mu) SCR Pure Plus 6 (Brake Rotors) -SPPF101-S6 | ![]() |
1 piece type. Curved slit (slotted). 6 per side. FC cast iron. Street use. Up to 600°C. Pair of 2 (Left and right). | $211.54 |
![]() | Arai Motorsport Brake Caliper Kit (Brake Upgrade Kits) -(GL)SHBKARMGDBA01 | ![]() |
$6,528.19 |
![]() | ENDLESS Brake Kit (6 POT) (Brake Upgrade Kits) -EC6BGDB | ![]() |
Best cost performance 6POT big caliper. For use with standard rotors. 2 x Caliper, 2 x Stay, 2 x Brake hose, 1 x Brake pad. | $1,964.92 |
![]() | ENDLESS Brake Kit (Chibi Roku - 6 POT Compact Mini) (Brake Upgrade Kits) -EC5BGDB | ![]() |
Compact size 6POT caliper ideal for use with cars using standard wheel sizes (16inch etc). For use with standard rotors. 2 x Caliper, 2 x Stay, 2 x Brake hose, 1 x Brake pad. | $1,923.64 |
![]() | ENDLESS Brake Kit (F and R Set) (Brake Upgrade Kits) -ECBXGDB | ![]() |
Front and rear set. | $3,327.16 |
![]() | ENDLESS Brake Kit (M4) (Brake Upgrade Kits) -EC4BGDB | ![]() |
Reasonably priced, low cost 4POT caliper. Ideally used with S2 rear calipers (Sold separately) for greater brake balance. For use with standard rotors. 2 x Caliper, 2 x Stay, 2 x Brake hose, 1 x Brake pad. | $1,799.80 |
![]() | ENDLESS Brake Kit (MONO 6 Sports) (Brake Upgrade Kits) -EF6BGDB | ![]() |
Utilises standard rotors. 2 x Caliper, 2 x Stay, 2 x Brake hose, 1 x Brake pad. | $2,790.52 |
![]() | ENDLESS Brake Kit (S2) (Brake Upgrade Kits) -EC2BGDB | ![]() |
2POT rear calipers ideal for use when matched with front M4 calipers (Sold separately). For use with standard rotors. 2 x Caliper, 2 x Stay, 2 x Brake hose, 1 x Brake pad. | $1,634.68 |
![]() | ENDLESS System Inch Up Kit (6 POT) (Brake Upgrade Kits) -EC6XGDB | ![]() |
Best cost performance 6POT big caliper. Ideally used with Racing 4 rear calipers (Sold separately) for greater brake balance. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | $3,038.20 |
![]() | ENDLESS System Inch Up Kit (F and R Set) (Brake Upgrade Kits) -ECAXGDB | ![]() |
Front and rear set. | $5,779.19 |
![]() | ENDLESS System Inch Up Kit (MONO 6 Sports) (Brake Upgrade Kits) -EF6XGDB | ![]() |
2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | $3,863.80 |
![]() | ENDLESS System Inch Up Kit (Racing 4 T-2) (Brake Upgrade Kits) -ECPXGDB | ![]() |
4POT rear calipers ideal for use when matched with front 6POT/6POT Wagon calipers (Sold separately). 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | DISCONTINUED |
![]() | ENDLESS System Inch Up Kit (Racing 4) (Brake Upgrade Kits) -EC8XGDB | ![]() |
4POT rear calipers ideal for use when matched with front 6POT/6POT Wagon calipers (Sold separately). 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | $3,038.20 |
![]() | ENDLESS System Inch Up Kit (Racing 6) (Brake Upgrade Kits) -EH7XGDB | ![]() |
Lightweight, rigid, big 6POT racing calipers ideal for circuit use. Developed from JTCC/SuperGT racing. Designed to cater 18 inch applications (Will depend on exact wheel type or clearance). 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | $3,844.08 |
![]() | ENDLESS System Inch Up Kit (Racing MONO 4) (Brake Upgrade Kits) -ED4XGDB | ![]() |
Low weight and highly rigid forged monoblock 6POT calipers. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | $4,514.19 |
![]() | ENDLESS System Inch Up Kit (Racing MONO 6) (Brake Upgrade Kits) -ECMXGDB | ![]() |
Low weight (2930g) and highly rigid forged monoblock 6POT calipers. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | $5,908.53 |
![]() | ENDLESS System Kit (6 POT) (Brake Upgrade Kits) -EC6TGDB | ![]() |
Best cost performance 6POT big caliper. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size), 1 x Brake pad. | $2,955.64 |
![]() | ENDLESS System Kit (Chibi Roku - 6 POT Compact Mini) (Brake Upgrade Kits) -EC5TGDB | ![]() |
Compact size 6POT caliper ideal for use with cars using standard wheel sizes (16inch etc). 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size), 1 x Brake pad. | $2,996.92 |
![]() | ENDLESS System Kit (F and R Set) (Brake Upgrade Kits) -ECJXGDB | ![]() |
Front and rear set. | $3,905.08 |
![]() | ENDLESS System Kit (M4) (Brake Upgrade Kits) -EC4SGDB | ![]() |
Reasonably priced, low cost 4POT caliper. Ideally used with S2 rear calipers (Sold separately) for greater brake balance. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size), 1 x Brake pad. | $2,105.27 |
![]() | ENDLESS System Kit (MONO 6 Sports) (Brake Upgrade Kits) -EF6TGDB | ![]() |
2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size), 1 x Brake pad. | $3,863.80 |
![]() | ENDLESS System Kit (S2) (Brake Upgrade Kits) -EC2SGDB | ![]() |
2POT rear calipers ideal for use when matched with front M4 calipers (Sold separately). 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size), 1 x Brake pad. | $1,923.64 |
![]() | HKS Brake System (Brake Upgrade Kits) -ECAXGDB-HKS | ![]() |
Front and rear set. | $5,536.09 |
![]() | Outlaw JAPAN System Kit PRO5000 6POT (Brake Upgrade Kits) -5600-0008 | ![]() |
Race use AP Racing calipers and racing rotors. | $5,054.49 |
![]() | Project μ (Mu) Forged Sports Caliper Kit 4pistons x 4pads (Brake Upgrade Kits) -FS44-F104A | ![]() |
The ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 156.25mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Includes Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $2,575.87 |
![]() | Project μ (Mu) Forged Sports Caliper Kit 4pistons x 4pads SLIM (Brake Upgrade Kits) -FS44S-F104 | ![]() |
Slim body greatly reduces caliper interference with wheels, thus making the 4Pistons x 4Pads SLIM model ideal for extreme applications. Maintains the ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 140.2mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Includes Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $2,493.31 |
![]() | CUSCO Pillow Ball Bushes (Bushes and Collars) -660 464 CV | ![]() |
Change to the rigid metal ball joint pivots, for precise control and stability! Race proven high quality spherical joint bearings result in no compression, no squeeze bushings, making the suspension work. Bearings are assembled in high quality shells with the rubber dust boots (on the majority of models). | $198.14 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | ![]() |
Performance damper unit only. | $408.67 |
![]() | CUSCO Lower Arm Bar Version I (Chassis Bars) -666 475 A | ![]() |
Reduce chassis flexing and improve body rigidity. The lateral arm improves body rigidity by connecting at the lower arm points, thus preventing body flex and therefore dramatically improving steering rigidity and response, and traction. | $67.15 |
![]() | CUSCO Lower Arm Bar Version II (Chassis Bars) -666 477 A | ![]() |
$122.19 |
![]() | CUSCO Power Brace (Chassis Bars) -672 492 C | ![]() |
$290.98 |
![]() | CUSCO Rear Frame Reinforcement Bar (Chassis Bars) -673 487 A | ![]() |
  | $100.17 |
![]() | Do Luck Floor Support Bar (Chassis Bars) -42033 | ![]() |
$356.38 |
![]() | Do Luck Rear Cross Bar (Chassis Bars) -90370 | ![]() |
  | $304.55 |
![]() | NAGISA Auto Gachiri Support (Chassis Bars) -(GL)0001GDB | ![]() |
3D designed, patented steel inner fender braces. | $192.09 |
![]() | STi Lower Arm Bar (Chassis Bars) -ST205104S020 | ![]() |
$123.84 |
![]() | STi Performance Damper (Chassis Bars) -ST205204S020 | ![]() |
DISCONTINUED |
![]() | Blitz Damper ZZ-R Spec-C (Coilover Kits) -93132 | ![]() |
Full length adjustable, single cylinder (monotube) coilover suspension with 2 way, 32 levels damper adjustment and separate tank. | $2,271.61 |
![]() | Buddy Club Racing Spec Damper (Coilover Kits) -(GL)SHCOBCWRXB01 | ![]() |
DISCONTINUED |
![]() | CUSCO Comp-S More Info (Coilover Kits) -667 600 A | ![]() |
$1,176.06 |
![]() | CUSCO Competition Zero-3 More Info (Coilover Kits) -667 63R CP | ![]() |
$2,129.63 |
![]() | CUSCO Competition Zero-3X More Info (Coilover Kits) -667 63X CP | ![]() |
3 way, 24 step damping force adjustment. | $3,314.78 |
![]() | CUSCO Sport Zero-1 More Info (Coilover Kits) -667 60E CN | ![]() |
$1,414.46 |
![]() | CUSCO Sport Zero-2E More Info (Coilover Kits) -666 60M CN | ![]() |
$1,652.85 |
![]() | CUSCO Sport Zero-2R (Coilover Kits) -667 60R CN | ![]() |
DISCONTINUED |
![]() | DG-5 Suspension Kit (Coilover Kits) -(GL)SHCODG5GDB01 | ![]() |
Adjusts to all driving styles, for street and track conditions. - 30 Step adjustable damper. - Enhanced strength utilising a 50/60mm diameter cylinder. - Superior strength steel brackets. - Adjustable upper mounts (Applicable models). - Additional helper/traction spring for improved tractability (Applicable models). - Highest quality Swift 65mm springs. | $2,704.95 |
![]() | GP Sports G-MASTER Pros Suspension Kit (Coilover Kits) -503402 | ![]() |
DG-5 collaboration model for circuit use. | DISCONTINUED |
![]() | HKS HIPERMAX Pro Pfr (Coilover Kits) -80100-AF006 | ![]() |
Full set. | $2,539.67 |
![]() | OHLINS DFV Type HA Complete Kit (Coilover Kits) -(GL)SHCO-OHL-WRXB-01 | ![]() |
Screw type coilover system. | $2,773.82 |
![]() | OHLINS DFV Type HAL Complete Kit (Coilover Kits) -(GL)SHCO-OHL-WRXB-02 | ![]() |
Screw type full length adjustable coilover system. | $3,764.47 |
![]() | TEIN EDFC (Coilover Kits) -EDK03-14140 | ![]() |
Electronic Damper Force Controller. For use with TEIN suspension compatible with EDFC. | DISCONTINUED |
![]() | TEIN EDFC Active (Coilover Kits) -EDK04-P8021 + EDK05-10120 | ![]() |
Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal G-actuated automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $475.98 |
![]() | TEIN EDFC Active and GPS Kit (Coilover Kits) -EDK04-P8021 + EDK05-10120 + EDK07-P8022 |