| Categories: | |
![]() | Apex APEXi AVC-R (Boost Controllers) -420-A004 | |
| Acutator Valve Controller Type-R. | DISCONTINUED |
![]() | Blitz A/F Box (Boost Controllers) -15063 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
![]() | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | |
| High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
![]() | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | |
| High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
![]() | Blitz External Voltage Input Harness (Boost Controllers) -15053 | |
| Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | DISCONTINUED |
![]() | Blitz Press Sensor Set (Boost Controllers) -19211 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | $ 69.29 |
![]() | Blitz Remote Switch (Boost Controllers) -15045 | |
| DISCONTINUED |
![]() | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | |
| Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-Color Spec S (Boost Controllers) -15080 | |
| Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec R (Boost Controllers) -15078 | |
| Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec S (Boost Controllers) -15073 | |
| Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC Type R (Boost Controllers) -15039 | |
| High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S (Boost Controllers) -15040 | |
| High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S PLUS (Boost Controllers) -15044 | |
| High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | DISCONTINUED |
![]() | Blitz SBC-DC (Boost Controllers) -15060 | |
| DISCONTINUED |
![]() | Blitz SBC-iD III (Boost Controllers) -15085 | |
| Twin sequential solenoid. | DISCONTINUED |
![]() | Blitz Temp Sensor Set (Boost Controllers) -19210 | |
| Optional part for use with SBC i-Color. One set per SBC i-Color. | $ 69.29 |
![]() | Blitz Wireless Remote Switch (Boost Controllers) -15042 | |
| Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
![]() | HKS EVC (Old) (Boost Controllers) -45003-AK001 | |
| 4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | |
| 4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
![]() | HKS EVC Display Stand (Boost Controllers) -53002-AK001 | |
| For use with display of HKS EVC. | $ 7.56 |
![]() | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | |
| Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | $ 75.59 |
![]() | HKS EVC EZ II (Boost Controllers) -45003-AK002 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC V (Boost Controllers) -45003-AK005 | |
| 5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC VI (Boost Controllers) -45003-AK010 | |
| 6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
![]() | HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | |
| DISCONTINUED |
![]() | HKS EVC VI-IR (Boost Controllers) -45003-AK011 | |
| 2.2 inch full colour TFT screen. | DISCONTINUED |
![]() | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | |
| 2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | DISCONTINUED |
![]() | HKS EVC VII (Boost Controllers) -45003-AK013 | |
| 7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | DISCONTINUED |
![]() | HKS EVC VII Option Parts (Boost Controllers) -45999-AK029 | |
| Option/Repair parts for use with HKS EVC VII. | $ 22.55 |
![]() | HKS EVC VII-MR (Boost Controllers) -45003-AK016 | |
| Revamped model of the high-end boost controller EVC VII. While retaining its wide range of functions, it now offers more precise control and improved response at high boost levels. | $ 408.18 |
![]() | HKS EVC-S (Boost Controllers) -45003-AK009 | |
| DISCONTINUED |
![]() | HKS EVC-S2 (Boost Controllers) -45003-AK015 | |
| The simple-to-operate boost controller EVC-S has evolved with a color LCD for excellent visibility. The display area is doubled compared to the previous EVC-S. A variety of displays that utilize dot displays enable intuitive operation and improve operability. Displays the function of each button during setup (button information display) and supports modification operations. Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D) making it easy to select boost according to the conditions. New features include circuit mode and scramble mode (Controlled by switching between two of the four boost settings) (Scramble mode is switched according to the set time). Added overtime setting to warning function - Warning control will not start unless the warning value has exceeded a set time, so the range of adjustment for warning control has been expanded. The maximum control boost is 250kPa and supports a wide range of boost control. Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting. | $ 250.95 |
![]() | HKS Power Editor (Boost Controllers) -42018-AT015 | |
| Vehicle specific plug and play boost increase and control. Includes standard boost control map. Custom changes to boost control map can be done via the Easy Writer software (download, requires USB connection to Windows 10, 8.1, 8, or 7 computer). Included reset connector, reverts to original settings. | $ 255.11 |
![]() | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | |
| DISCONTINUED |
![]() | TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | |
| For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | |
| For use of Profec E-01 pressure sensor with e-Manage. | $ 10.23 |
![]() | TRUST GReddy Profec (Boost Controllers) -15500214 | |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
![]() | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | |
| DISCONTINUED |
![]() | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | |
| Can be used in conjunction with Trust e-Manage. | DISCONTINUED |
![]() | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | |
| Repair /service part for Profec (OLED screen). | $ 10.25 |
![]() | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | |
| DISCONTINUED |
![]() | TRUST GReddy Profec White (Boost Controllers) -15500219 | |
| Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
![]() | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | |
| For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | |
| Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz R-FIT (Engine Management) -15120 | |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Type II for Turbo (Engine Management) -16401306 | |
| For use with Trust GReddy e-Manage Ultimate. -99~3.0kPa. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | |
| DISCONTINUED |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | |
| Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
![]() | Blitz E-ESC (Other Controllers) -16087 | |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | Blitz Sma Thro (Other Controllers) -ASSM1 | |
| Smart Thro-Con (Smart Throttle Controller). Compact on/off switch for 1 of 10 throttle modes. Switch can be installed in one of three configurations (some models include bundled with service panel adapter). Plug and play installation with car specific harness. 10 modes: 8 ratio fixed modes, and 2 auto modes (Selectable by rotary switch on the side of main unit). Reverse cancel harness (sold separately) switches unit off when reverse is engaged. Function to select ON/OFF at each engine start is also enabled when used with the reverse cancellation harness. Equipped with safety functions such as normal return function. | $ 134.14 |
![]() | Blitz Thro Con (Other Controllers) -ATRM1 | |
| Throttle Controller. In addition to standard 20 modes including auto mode, Blitz Thro Con also supports options such as newly developed start control system. High visability VA type liquid crystal display. 20 modes are installed as standard. Different control methods and different characteristics realize the throttle feel that suits your taste. The "hybrid model" has control ratio settings tuned specifically for hybrid vehicles. "Simple mode function" displays only your 5 favorite modes to be used frequently, is installed from the 20 modes. By setting in advance, you can save time and effort at the time of mode selection. In addition to the standard 20 modes, "Scramble mode" that raises the ratio to the maximum is installed (Separately sold option part is necessary). "Start Control System (SCS)" function is available by connecting optional SCS harness (Sold separately). This makes it possible to retain the cancellation state of standard idling stop and retain the initial mode of SI drive and drive mode selection as you wish (on equipped vehicles). Should trouble occur in the power supply wiring, the safety function reverts back to the normal circuit immediately. | $ 249.44 |
![]() | HKS SEC (Other Controllers) -45012-AT001 | |
| Suspension Error Canceller. Stops suspension system problem error code from display when using aftermarket dampers/coilover suspsension. | $ 255.11 |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | |
| $ 73.45 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | |
| $ 115.02 |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | |
| Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | |
| DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | |
| DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | |
| For use with Okachan Water Temp oC. | DISCONTINUED |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | |
| DISCONTINUED |
![]() | ARK Design Meter Stand (Performance Meters) -01-0106X-L | |
| DISCONTINUED |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | |
| DISCONTINUED |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | |
| DISCONTINUED |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | |
| Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
![]() | HKS CAC Cute (Performance Meters) -44007-AK002 | |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | |
| DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | |
| $ 66.77 |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | |
| Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | |
| Part included with A/F Device (repair part). | $ 311.80 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | |
| Part included with A/F Device (repair part). | $ 112.25 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | |
| Part included with A/F Device (repair part). | $ 17.46 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | |
| DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | |
| For NA and Turbo. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | |
| DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | |
| DISCONTINUED |
![]() | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | |
| 10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | $ 66.01 |
![]() | PIVOT ATT (Turbo Timers) -ATT | |
| Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | |
| DISCONTINUED |
![]() | PIVOT SAT (Turbo Timers) -SAT | |
| Security Auto Timer. | DISCONTINUED |
![]() | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT TTX (Turbo Timers) -TTX | |
| Ultra compact design. | DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | |
| DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | |
| Separate type. | DISCONTINUED |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | |
| DISCONTINUED |
![]() | FET QRS III (Boss Kits) -FQS005 | |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
![]() | FET QRS III Steering Plate (Boss Kits) -FQS006 | |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | |
| $ 16.38 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | |
| DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | |
| For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
![]() | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
![]() | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | |
| Steering wheel quick release system for competition cars. | $ 208.50 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | |
| Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | |
| DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | |
| DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | |
| $ 1530.66 |
![]() | HKS Floor Mat Set OCT (Floor Mats) -53001-AT017 | |
| $ 290.38 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
![]() | Toyota GR Luggage Mat (Floor Mats) -08241-14010 | |
| $ 100.78 |
![]() | Toyota Luggage Soft Tray (Floor Mats) -08241-14020 | |
| $ 92.60 |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | |
| $ 17.13 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | |
| On dash type. | $ 118.74 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | |
| $ 11.97 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | |
| $ 8.00 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | |
| $ 32.44 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | |
| DISCONTINUED |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | |
| DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | |
| Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | |
| $ 95.49 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | |
| $ 507.57 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | |
| DISCONTINUED |
![]() | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
![]() | SARD 4 Point Harness (Harnesses) -80221 | |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
![]() | SARD 6 Point Harness (Harnesses) -80223 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
![]() | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | |
| $ 29.61 |
![]() | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
![]() | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | |
| $ 519.04 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | |
| $ 110.55 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | |
| $ 116.22 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | |
| DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | |
| Set of 2. | $ 19.27 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | |
| 4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | |
| Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | |
| Pair. | $ 21.10 |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | |
| 4 x 4 point harness. | DISCONTINUED |
![]() | Toyota GR Projection Illumination (Other) -08520-14010 | |
|   | $ 102.04 |
![]() | BRIDE FO Type Super Seat Rail (Seat Accessories) -G101FO | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA seats. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. | $ 101.78 |
![]() | BRIDE FX Type Super Seat Rail (Seat Accessories) -G101FX | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
![]() | BRIDE MO Type Super Seat Rail (Seat Accessories) -G101MO | |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 134.04 |
![]() | BRIDE RO Type Super Seat Rail (Seat Accessories) -G101RO | |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 120.66 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | |
| $ 32.31 |
![]() | BRIDE XR Type Super Seat Rail (Seat Accessories) -G101XR | |
| For use with BRIDE Stradia II Wide (Stradia II type-XL) seats. | $ 144.75 |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | |
| DISCONTINUED |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
![]() | Prodrive Competition Seat (Seats) -55660011 | |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
![]() | Blitz Sports Steering Wheel (Steering Wheels) -13530 | |
| DISCONTINUED |
![]() | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
![]() | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
![]() | HKS Replacement Steering (Steering Wheels) -51999-AT003 | |
| Standard replacement type steering wheel. | $ 573.84 |
![]() | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | |
| D shape steering wheel. | $ 453.53 |
![]() | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | |
| Round shape steering wheel. | $ 535.42 |
![]() | MOMO MOD.08 (Steering Wheels) -M-58 | |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
![]() | Nardi Personal Blitz (Steering Wheels) -P071 | |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
![]() | Nardi Personal Blitz Leather (Steering Wheels) -P075 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
![]() | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
![]() | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
![]() | Nardi Personal Neo Grinta (Steering Wheels) -P024 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
![]() | Nardi Personal Pole Position (Steering Wheels) -P002 | |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
![]() | Nardi Classic Punching Leather (Steering Wheels) -N005 | |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
![]() | Nardi Classic Smooth Leather (Steering Wheels) -N111 | |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
![]() | Nardi Classic Suede Leather (Steering Wheels) -N115 | |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
![]() | Nardi Personal Trophy (Steering Wheels) -P051 | |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | SARD Steering - D-shape (Steering Wheels) -80219 | |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
![]() | SARD Steering - Semi Deep (Steering Wheels) -80227 | |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
![]() | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
![]() | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
![]() | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
![]() | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
![]() | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
![]() | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
![]() | Gruppe M Ram Air System (Air Filters) -FR-0138 | |
| Carbon duct intake kit. Complete air intake system designed to supply not only clean air (free of any residue or particulate matter), but also maintain ample cooling to provide the highest density possible, in addition to properly utilizing the ram effect at high speeds, to effectively increase the volume of the intake charge. Constructed using the finest carbon fiber or carbon kevlar materials, hand crafted to ensure proper fit and finish. Filtration is through Gruppe M specification four-layer cotton K&N filters. | $ 909.58 |
![]() | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -WT-167B 59653 | |
| Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | $ 40.00 |
![]() | HKS Super Air Filter More Info (Air Filters (Panel/OEM) Type) -70017-AT131 | |
| New standard (stock) replacement type air filter utilizing newly developed dry non-woven fabric filter. High dust collection capacity and low resistance are implemented together at a high level. | $ 31.53 |
![]() | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | |
| DISCONTINUED |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | |
| DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | |
| Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV2 (Blow Off Valves and Kits) -11501672 | |
| Universal. Blow off valve unit only. GReddy Blow Off Valve FV2 inherits the floating valve structure that was popular in the previous model, while being improved with a more sophisticated design providing better maintainability and reliability. A fidget spinner is used to adjust the spring preload without tools and the hose union direction of the top cover can be adjusted 360° without tools. Can directly replace GReddy Blow Off Valve Type RS, RZ, and FV as the mounting flange and opening have the same dimensions. | $ 164.88 |
![]() | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | |
| Universal. Blow off valve unit only. | $ 152.37 |
![]() | Blitz Carbon Intake System (Induction Boxes and Ducts) -27027 | |
| High performance intake system with carbon duct and case that best fits to engine room by advanced forming technology. Carbon ducts duct case are lightweight, high in strength and even properly control intake air temperature. Duct and Designed to efficiently increase intake air pressure, sharp engine response is achieved. Performance proven stainless steel mesh filter is used, providing supreme inhalation efficiency and intake sound. | $ 885.64 |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
![]() | HKS Super Turbo Muffler (Exhaust Systems (Cat Back)) -31029-AT005 | |
| High-dimensional Super Turbo Muffler. Exhaust Efficiency & Sound Pressure Reduction are implemented together. The turbo engine masters HKS developed the Super Turbo Muffler, prioritising the following 3 characteristics together to develop Super Turbo Muffler: - Effective on stock~high performance vehicles with upgraded turbos. - Performance exhaust that still meets JASMA volume standards. - Unique exhaust sound designed specifically for each engine type. | $ 1669.86 |
![]() | HKS Super Turbo Muffler - Urban Matte Edition (Exhaust Systems (Cat Back)) -31029-AT014 | |
| High-dimensional Super Turbo Muffler. Exhaust Efficiency & Sound Pressure Reduction are implemented together. The turbo engine masters HKS developed the Super Turbo Muffler, prioritising the following 3 characteristics together to develop Super Turbo Muffler: - Effective on stock~high performance vehicles with upgraded turbos. - Performance exhaust that still meets JASMA volume standards. - Unique exhaust sound designed specifically for each engine type. | $ 1844.66 |
![]() | Blitz NUR-SPEC Finisher VSR (Exhaust Tips) -63189V | |
| $ 538.56 |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | |
| DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | |
| DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | |
| $ 13.04 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | |
| Universal gear oil cooler kit. | $ 792.41 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | |
| Universal differential oil cooler kit. | $ 776.35 |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | |
| 1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | |
| 1 piece. | DISCONTINUED |
![]() | TRUST Gear Oil Pump (Other) -12004820 | |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
![]() | TRUST GReddy Washer Tank (Other) -13506101 | |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
![]() | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | |
| Universal transmission oil cooler kit. | $ 829.89 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
![]() | HKS Fine Tune V Belt (Belts and Chains) -24996-AK051 | |
| Using the latest in belt technology, these belts maintain engine condition, while improving engine room appearance. Increased durability at high temperatures which can be found in the engine bay of tuned vehicles. Increased performance in cold weather conditions. Lightweight and good friction tolerance properties, mean that excess tension is not required, while anti-sound properties reduces belt squeal. EPDM (Ethylene Propylene Diene Monomer) Rubber is used in the manufacture of these belts because of: - Better durability and performance in hotter or colder conditions with improved friction tolerance. - Much lighter than previous version of belt. - Short fiber mixture in rib rubber improves the performance over previous version. Compared to standard belts: High temperature durability: 4 times greater. Low temperature durability: 10 times greater. Abrasion resistance: 30% improved. Weight: 17% lighter. Noise: Less. | $ 52.60 |
![]() | HKS Carbon ECU Cover (Covers) -70026-AT017 | |
|   | $ 142.99 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | |
| DISCONTINUED |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | |
| DISCONTINUED |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | |
| DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | |
| DISCONTINUED |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | |
| DISCONTINUED |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | |
| $ 4.03 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | |
| $ 194.32 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
![]() | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | |
| $ 283.46 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | |
| Mount bracket. | $ 32.88 |
![]() | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900537 | |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | $ 112.94 |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | |
| Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | |
| DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | |
| DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | |
| DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | |
| DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | |
| DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | |
| Universal kit. 1000ml. | $ 92.60 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | |
| Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | |
| Universal kit. 680ml. | $ 87.24 |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | |
| Power steering fluid tank. | DISCONTINUED |
![]() | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -1C2 311 A28 | |
| $ 169.57 |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
![]() | ENDLESS Brake Lines (Swivel Racing Type) (Brake Lines) -EB242 | |
| Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $ 219.68 |
![]() | ENDLESS Brake Lines (Swivel Steel Type) (Brake Lines) -EB242SS | |
| Steel and stainless construction ensures durability and excellent reliability. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: Carbon Steel. Socket: Stainless. | $ 154.64 |
![]() | DIXCEL ES Type (Brake Pads) -ES 125 8831 | |
| EXTRA Speed. Street/Winding (Normal)/Winding (Hard) use. 0~600°. NAO (Non Asbestos Organic material). Ideal for highway/winding sports driving. | $ 83.97 |
![]() | DIXCEL M Type (Brake Pads) -M 121 5618 | |
| Street/Winding (Normal) use. 0~500°. Non Asbestos Ceramic material. Super low dust. Ideal for users who want low dust and higher control. | $ 118.55 |
![]() | DIXCEL Premium Type (Brake Pads) -P 121 5618 | |
| Premium pad that balances price and performance. Street/Winding (Normal) use. 0~500°. Ceramic composite (Copper Free, 2021 compliant). | $ 72.69 |
![]() | DIXCEL X Type (Brake Pads) -X 121 5618 | |
| Street/Winding (Normal)/Off road use. Ideal for heavier cars, mini van, SUVs and large wheel applications. 0~700°. Graphite metallic. | $ 135.68 |
![]() | DIXCEL Z Type (Brake Pads) -Z 121 5618 | |
| Street to circuit use. 0~850°. Graphite metallic material. High stopping power and controlable all round performance compound. | $ 135.68 |
![]() | ENDLESS CC-Rg (Brake Pads) -EP539CRG2 | |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 121.57 |
![]() | ENDLESS CC33 (S55G) (Brake Pads) -EP539CC33 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.28~0.33. | $ 142.99 |
![]() | ENDLESS CC35 type-E (N84M) (Brake Pads) -EP539CC35E | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.30~0.35. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 249.44 |
![]() | ENDLESS CC38 (ME22) (Brake Pads) -EP539CC38 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.33~0.38. Based on the CC40 (ME20) compound, this variation with slightly lowered friction coefficient, allows for more control. Ideal for medium weight vehicles with high breaking loads or heavy vehicles on low speed circuits. | $ 142.99 |
![]() | ENDLESS CC40 (ME20) (Brake Pads) -EP539CC40 | |
| Circuit Compound. Semi metallic. 0~650°C. Average friction coefficient: 0.22~0.28. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 142.99 |
![]() | ENDLESS CC43 (N35S) (Brake Pads) -EP539CC43 | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.40~0.43. These brake pads deliver stable performance even under high temperatures and high loads, especially when used continuously with heavy vehicles, putting a large strain on the brakes. They pads are recommended for high-powered vehicles driving on circuits, where increased braking performance is desired. The material provides excellent control and stable braking force, enough to be used in the WRC. They also feature excellent release control with a moderate pedal stroke and a tactile feel. - Circuit driving for heavy vehicles weighing approximately 2 tons. - Circuit driving for high-powered vehicles. | $ 142.99 |
![]() | ENDLESS CC60 (N30C) (Brake Pads) -EP539CC60 | |
| Circuit Compound (Rally Use). Semi metallic. 150~800°C. Average friction coefficient: 0.50~0.60. | $ 136.06 |
![]() | ENDLESS MX72 (Brake Pads) -EP539MX72 | |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 127.87 |
![]() | ENDLESS MX72 PLUS (Brake Pads) -EP539MXPL | |
| Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 137.95 |
![]() | ENDLESS SSM (Brake Pads) -EP539SSM | |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
![]() | ENDLESS SSM PLUS (Brake Pads) -EP539MP | |
| Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 127.87 |
![]() | ENDLESS W-003 (Brake Pads) -EP539W003 | |
| Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 215.43 |
![]() | Blitz Big Caliper Kit II (Brake Upgrade Kits) -86115 | |
| Redesigned to further braking performance and controlability. Forged aluminium calipers are lightweight and highly rigid. Slit (slotted) type rotors further improve heat dissapation. Proven performance as used on Blitz Racing Project Tsukuba Time Attack demo car. | $ 1632.70 |
![]() | ENDLESS System Inch Up Kit (6 POT) More Info (Brake Upgrade Kits) -ECZ6XDB22 (Old: EC6XDB22) | |
| 6POT big caliper with excellent cost performance that can accommodate rotors up to 370mm rotors. Caliper body is made from lightweight and highly rigid forged aluminum. Uneven wear of the brake pads is prevented and high controllability is achieved through the use of varying pistons. These features combined ensure stable braking force even in high-power tuned cars, and is the best match for street-spec sports cars equipped with high-output engines. 2 x Caliper (Alumite Blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2291.58 |
![]() | ENDLESS System Inch Up Kit (F and R Set) More Info (Brake Upgrade Kits) -ECZAXDB22 (Old: ECAXDB22) | |
| Front and rear set. | $ 4111.99 |
![]() | ENDLESS System Inch Up Kit (MONO 6 Sports TA) More Info (Brake Upgrade Kits) -EFZ6XDB22 | |
| Updated version of MONO 6 Sports caliper. Using the latest processing technology, the outer brake fluid pipe has been eliminated as an obstruction to the flow path and prevents fluid leakage due to pipe breakage. Weight has been reduced and the stress balance has been improved (rigidity increased by 12%) compared to the original MONO 6 Sports caliper product. The caliper surface is 3D-cut, which is effective for heat dissipation while looking good. 2 x Caliper (Blue Coating), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit, Blue Alumite), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 3159.58 |
![]() | ENDLESS System Inch Up Kit (MONO 6 Sports) More Info (Brake Upgrade Kits) -EF6XDB22 | |
| 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | DISCONTINUED |
![]() | ENDLESS System Inch Up Kit (Racing 6) More Info (Brake Upgrade Kits) -EHZ7XDB42 (Old: EH7XDB42) | |
| Lightweight, rigid, big 6POT racing calipers ideal for circuit use. Developed from JTCC/SuperGT racing. Newly designed using the latest simulation technology, it maintains the same high rigidity as the original type while reducing weight by 380g. Uneven brake pad wear durin high loads has been further suppressed. Compared to the original type Racing 6 caliper, the parts that tend to interfere with the wheel are now smaller, allowing for improved wheel clearance, which is an obstacle for big calipers. 2 x Caliper (Alumite blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 3014.39 |
![]() | ENDLESS System Inch Up Kit (Racing MONO 6 Rally) More Info (Brake Upgrade Kits) -FAZMXDB42 (Old: FAMXDB42) | |
| $ 4417.17 |
![]() | ENDLESS System Inch Up Kit (Racing MONO 6) More Info (Brake Upgrade Kits) -EDZMXDB42 (Old: EDMXDB42) | |
| Low weight (2930g) and highly rigid forged monoblock 6POT calipers. 2 x Caliper (Hard Alumite, Engraved ENDLESS logo), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (e-Slit, Turfram coat bell housing), 1 x Brake pad (Set - Left and right, SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 4637.64 |
![]() | ENDLESS System Inch Up Kit (Rear Inch Up) More Info (Brake Upgrade Kits) -ECZ8YDB22 (Old: EC8YDB22) | |
| $ 2023.87 |
![]() | TOM's TOM's x BREMBO Monoblock GT Caliper Brake Kit (Brake Upgrade Kits) -43051-TDB02 | |
| TOM's and BREMBO collaboration brake kit. Monoblock brake calipers, drilled brake rotors and low dust/noise brake pads. | $ 3453.43 |
![]() | SPOON SPORTS Rigid Collar (Bushes and Collars) -50261-DBA-000 | |
| Strengthens and increases chassis rigidity without going overboard and compromising the cars inherent handling characteristics. Rigid collars are simple in their shape, clever in their design, made from a aluminium alloy (kept confidential), provides performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan. Rigid collar kits are simple to fit and low cost, without affecting the basic geometry of the body. The way the Rigid Collars works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. When the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins. This is why an older vehicles fitted with new bushes, shocks and springs, still doesn't behave like a new car. Rigid Collars are a aluminium washer with a square outer taper that increases adhesion on the thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and bolt hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and permanently stopping movement. Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident. | $ 123.78 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | |
| Performance damper unit only. | DISCONTINUED |
![]() | CUSCO Power Brace (Chassis Bars) -1C2 492 ER | |
| $ 154.96 |
![]() | HKS Carbon Brace (Chassis Bars) -83001-AT001 | |
| HKS and Graphite Design collaboration item. Known for their popular carbon golf club shafts amongst world tour professionals, these bars are designed to create a unique "bend" and improve driving performance. | $ 1190.51 |
![]() | HKS Kansai Rear Upper Brace (Chassis Bars) -KST018 | |
| $ 196.84 |
![]() | HKS HIPERMAX MAX IV GT 20SPEC (Coilover Kits) -80230-AT023A | |
| Resetting of the HIPERMAX IV GT with the latest technology that balances handling performance and street comfort. It's perfect for daily street drive with style and performance. You and your passenger can have a comfortable ride even when lowered. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. "M Shaft" With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street or circuit. | DISCONTINUED |
![]() | HKS HIPERMAX MAX IV SP (Coilover Kits) -80250-AT003 | |
| Sport model but still comfortable on winding road applications. This "MAX IV SP" is the ultimate sport model for high grip radial tires. Information such as tire, road surface condition, and available traction are transfered straight to driver. It's a perfect street sport model suspension for people who love to drive fast but still want comfort. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. M Shaft (46mm normal type) With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. Adopted Pillow Ball Upper Mount For more accurate and sharp steering. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle. | DISCONTINUED |
![]() | HKS HIPERMAX MAX IV SP LAUNCH EDITION (Coilover Kits) -80250-AT003L | |
| To celebrate the release at Tokyo Auto Salon offered in the limited color version. Sport model but still comfortable on winding road applications. This "MAX IV SP" is the ultimate sport model for high grip radial tires. Information such as tire, road surface condition, and available traction are transfered straight to driver. It's a perfect street sport model suspension for people who love to drive fast but still want comfort. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. M Shaft (46mm normal type) With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. Adopted Pillow Ball Upper Mount For more accurate and sharp steering. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle. | DISCONTINUED |
![]() | HKS HIPERMAX R (Coilover Kits) -80310-AT003 | |
| 9 years after the launch of HIPERMAX IV GT, new HIPERMAX R series brings together all the technical capabilities cultivated over the years by HKS providing good handling, traction and fit performance that is unrivaled by other brands. | $ 1886.39 |
![]() | HKS HIPERMAX S (Coilover Kits) -80300-AT023 | |
| 9 years after the launch of HIPERMAX IV GT, new HIPERMAX S series was born for the superior “Driving Comfort" with advanced features in damping force, durability and appearance. Single Tube Damper Design The new HIPERMAX S series continue to employing the single tube structure. The advantage of this structure is to be able to provide the gas and oil chamber separately, and then it allows to use of a large diameter piston. As a result, a quality and stable damping force is gained. Inverted Shock Absorber (Strut) Large lateral forces are spread over a larger area increasing rigidity under high loads or with larger wheels Damper is attached to body side reducing un-sprung weight for improved handling Dual PVS The Pre-load Valve System, introduced in the previous MAX IV GT 20 Spec,S-Style L,S-Style C, created a remarkable difference to handling performance. This has been further refined to introduce “Dual PVS”. High speed damping is reduced while keeping unnecessary movement to a minimum. WR Needle: Wide range damping force adjustment mechanism The improved shape of the needle expands the oil relief channel. Each step of the 30 step adjustment is now more prominent. Having softer adjustment options gives more options for street driving. ADVANCED BUMP RUBBER(Evolution of Bump stop rubber) For HIPERMAX S, a further improved “ADVANCED BUMP RUBBER” was developed which pursues further softness and also shorter variations deliver a wide range of options for a variety of cars delivers a natural and smooth experience. PNE Coating HKS previously introduced SNOW EDITION versions to combat corrosion head on. The result of this development was PNE coating delivering 5x better durability compared to standard galvanizing. Strengthened Rubber Upper Mount Strengthened rubber upper mount is able to absorb small body vibrations whilst tightening up the mount over stock. Revised cross sectional design and material composition balance comfort and performance. "KODAWARI" of Exterior The aluminum top mount is chamfered by machining to enhance the beauty of the product delivering detail and quality which was not previously available through previous printing methods. | $ 1874.96 |
![]() | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | |
|   | $ 12.60 |
![]() | PROVA Resevoir Tank Cover (Other) -90000JL0200 | |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
![]() | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | |
| Mechanical lifter kit. | DISCONTINUED |
![]() | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
![]() | HKS HIPERMAX Touring (Springs) -80280-AT001 | |
| Hybrid spring kit that utilizes the stock adaptive suspension system and offers a height-adjustable spring. A lot of high performance cars feature electronic control of damping force adjustment. HKS assumed it would be best to keep stock electronic control system but add an additional flexibility and offers a height adjustable spring. HKS height adjustable spring kits are a great alternative to conventional springs. With included high adjuster it is possible to select different height suiting your car and enjoy more sporty ride. | $ 611.63 |
![]() | HKS HIPERMAX Touring x Tool Set (Springs) -80280-AT001V | |
| Tokyo Auto Salon 2020 limited edition item. Hybrid spring kit that utilizes the stock adaptive suspension system and offers a height-adjustable spring. A lot of high performance cars feature electronic control of damping force adjustment. HKS assumed it would be best to keep stock electronic control system but add an additional flexibility and offers a height adjustable spring. HKS height adjustable spring kits are a great alternative to conventional springs. With included high adjuster it is possible to select different height suiting your car and enjoy more sporty ride. Collaboration with TONE results in this tool set specific for Toyota Supra. | $ 893.83 |
![]() | HKS HKS x TONE Tool Set (Springs) -82005-AT001 | |
| Tokyo Auto Salon 2020 limited edition tool set. Collaboration with TONE results in this tool set specific for Toyota GR Supra. | DISCONTINUED |
![]() | Blitz Strut Tower Bar (Strut Tower Bars) -96169 | |
| $ 148.81 |
![]() | HKS Kansai Tower Bar (Strut Tower Bars) -KST017 | |
| $ 190.86 |
![]() | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
![]() | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
![]() | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
![]() | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | |
| $ 218.89 |
![]() | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | |
| DISCONTINUED |
![]() | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
![]() | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
![]() | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
![]() | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
![]() | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
![]() | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | |
| DISCONTINUED |
![]() | WORK Lock Nut Set (Wheel Nuts) -240254 | |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
![]() | WORK RS Nut (Wheel Nuts) -240007 | |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
![]() | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | |
| $ 28.47 |
![]() | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | |
| $ 27.46 |
![]() | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | |
| $ 38.55 |
![]() | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
![]() | Garage Vary Universal Turbulator (Other) -30-4001 | |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
![]() | KENSTYLE Accent Screws (Other) -(GL)AS01 | |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
![]() | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
![]() | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
![]() | SARD LSR Wing (Spoilers/Wings) -81097 | |
| Adjustable carbon rear wing with vehicle specific brackets. | $ 1123.74 |
![]() | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | |
| Universal. Pair (Left and right). | $ 95.05 |
![]() | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | |
| Universal. Pair (Left and right). | $ 149.29 |
![]() | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | |
| Universal. Pair (Left and right). | DISCONTINUED |
![]() | SARD Aero Blade (Exterior Parts) -61967 | |
| Sold individually (1 piece). | $ 20.31 |
![]() | SARD Front Bumper Canard (Exterior Parts) -61965 | |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
![]() | SARD Front Under Flap (Exterior Parts) -61966 | |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
![]() | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
![]() | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | |
| $ 217.69 |
![]() | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | |
| Gas/Petrol cap cover. | DISCONTINUED |
![]() | Blitz i-Burner Expansion Kit (Globes) -14566 | |
| DISCONTINUED |
![]() | Blitz i-Burner Spark Lights (Globes) -14565 | |
| DISCONTINUED |
![]() | Craft Square BSM Trans Indicator (Mirrors) -(GL)OT-MR-CRA-DB02-02 | |
| Blind sport monitor (BSM) trans indicator. | $ 100.47 |
![]() | Craft Square LED Side Marker Lamp (Mirrors) -(GL)OT-MR-CRA-DB02-03 | |
| Blind sport monitor (BSM) trans indicator. | $ 41.26 |
![]() | Craft Square TCA140R-F (Mirrors) -CSB140RF-DB | |
| Touring Competition Mirror. Lightweight, rigid mirrors made from carbon composite. The locking mechanism provides reliability in motorsports applications and on the street. | DISCONTINUED |
![]() | HKS Oil Filler Cap Cover (Oil Filler Caps) -24003-LB004 | |
| Billet aluminium alloy oil filler cap cover. | $ 61.10 |
![]() | TRUST GReddy Cable Ties (Other) -18001742 | |
| GReddy logo cable ties. | $ 14.19 |
![]() | HKS Emblem (Stickers and Emblems) -51003-AK027 | |
| Silver. 87 x 35mm. | DISCONTINUED |
![]() | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
![]() | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | |
| ABS resin emblem of Tuned by HKS. Size:115mm x 19mm. | $ 28.22 |
![]() | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
![]() | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
![]() | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
![]() | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
![]() | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
![]() | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | |
| HKS logo on oil color. | $ 12.35 |
![]() | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
![]() | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
![]() | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | |
| Small-sized transcription sticker. | $ 12.35 |
![]() | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
![]() | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | |
| High brightness reflective sheet. | $ 24.76 |
![]() | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
![]() | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
![]() | TOMEI 70 Sticker (Stickers and Emblems) -761031 | |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
![]() | TOMEI Emblem (Stickers and Emblems) -763000 | |
| 120 x 22mm. | $ 19.65 |
![]() | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
![]() | Top Fuel Emblem (Stickers and Emblems) -26735831 | |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
![]() | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | |
| DISCONTINUED |
![]() | Blitz Towing Strap (Tow Hooks/Straps) -13890 | |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
![]() | CUSCO Tow Hook (Tow Hooks/Straps) -1C2 017 F | |
| High-strength steel tow hook that can be folded to 90°. Removal or drilling of standard tow hook cover is required for installation. | $ 57.70 |
![]() | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
![]() | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | |
| $ 41.04 |
![]() | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
![]() | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
![]() | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | |
| Set of 4. | $ 19.84 |
![]() | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
![]() | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
![]() | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
![]() | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
![]() | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
Back | Back to TOP