| Categories: | |
![]() | Apex APEXi AVC-R (Boost Controllers) -420-A004 | |
| Acutator Valve Controller Type-R. | DISCONTINUED |
![]() | Blitz A/F Box (Boost Controllers) -15063 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
![]() | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | |
| High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
![]() | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | |
| High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
![]() | Blitz External Voltage Input Harness (Boost Controllers) -15053 | |
| Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | DISCONTINUED |
![]() | Blitz Press Sensor Set (Boost Controllers) -19211 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | $ 69.29 |
![]() | Blitz Remote Switch (Boost Controllers) -15045 | |
| DISCONTINUED |
![]() | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | |
| Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-Color Spec S (Boost Controllers) -15080 | |
| Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec R (Boost Controllers) -15078 | |
| Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec S (Boost Controllers) -15073 | |
| Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC Type R (Boost Controllers) -15039 | |
| High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S (Boost Controllers) -15040 | |
| High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S PLUS (Boost Controllers) -15044 | |
| High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | DISCONTINUED |
![]() | Blitz SBC-DC (Boost Controllers) -15060 | |
| DISCONTINUED |
![]() | Blitz SBC-iD III (Boost Controllers) -15085 | |
| Twin sequential solenoid. | DISCONTINUED |
![]() | Blitz Temp Sensor Set (Boost Controllers) -19210 | |
| Optional part for use with SBC i-Color. One set per SBC i-Color. | $ 69.29 |
![]() | Blitz Wireless Remote Switch (Boost Controllers) -15042 | |
| Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
![]() | HKS EVC (Old) (Boost Controllers) -45003-AK001 | |
| 4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | |
| 4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
![]() | HKS EVC Display Stand (Boost Controllers) -53002-AK001 | |
| For use with display of HKS EVC. | $ 7.56 |
![]() | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | |
| Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | $ 75.59 |
![]() | HKS EVC EZ II (Boost Controllers) -45003-AK002 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC V (Boost Controllers) -45003-AK005 | |
| 5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC VI (Boost Controllers) -45003-AK010 | |
| 6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
![]() | HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | |
| DISCONTINUED |
![]() | HKS EVC VI-IR (Boost Controllers) -45003-AK011 | |
| 2.2 inch full colour TFT screen. | DISCONTINUED |
![]() | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | |
| 2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | DISCONTINUED |
![]() | HKS EVC VII (Boost Controllers) -45003-AK013 | |
| 7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | DISCONTINUED |
![]() | HKS EVC VII Option Parts (Boost Controllers) -45999-AK029 | |
| Option/Repair parts for use with HKS EVC VII. | $ 22.55 |
![]() | HKS EVC VII-MR (Boost Controllers) -45003-AK016 | |
| Revamped model of the high-end boost controller EVC VII. While retaining its wide range of functions, it now offers more precise control and improved response at high boost levels. | $ 408.18 |
![]() | HKS EVC-S (Boost Controllers) -45003-AK009 | |
| DISCONTINUED |
![]() | HKS EVC-S2 (Boost Controllers) -45003-AK015 | |
| The simple-to-operate boost controller EVC-S has evolved with a color LCD for excellent visibility. The display area is doubled compared to the previous EVC-S. A variety of displays that utilize dot displays enable intuitive operation and improve operability. Displays the function of each button during setup (button information display) and supports modification operations. Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D) making it easy to select boost according to the conditions. New features include circuit mode and scramble mode (Controlled by switching between two of the four boost settings) (Scramble mode is switched according to the set time). Added overtime setting to warning function - Warning control will not start unless the warning value has exceeded a set time, so the range of adjustment for warning control has been expanded. The maximum control boost is 250kPa and supports a wide range of boost control. Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting. | $ 250.95 |
![]() | HKS Power Editor (Boost Controllers) -42018-AH002 | |
| Vehicle specific plug and play boost increase and control. Includes standard boost control map. Custom changes to boost control map can be done via the Easy Writer software (download, requires USB connection to Windows 10, 8.1, 8, or 7 computer). Included reset connector, reverts to original settings. | $ 198.42 |
![]() | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | |
| DISCONTINUED |
![]() | TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | |
| For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | |
| For use of Profec E-01 pressure sensor with e-Manage. | $ 10.23 |
![]() | TRUST GReddy Profec (Boost Controllers) -15500214 | |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
![]() | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | |
| DISCONTINUED |
![]() | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | |
| Can be used in conjunction with Trust e-Manage. | DISCONTINUED |
![]() | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | |
| Repair /service part for Profec (OLED screen). | $ 10.25 |
![]() | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | |
| DISCONTINUED |
![]() | TRUST GReddy Profec White (Boost Controllers) -15500219 | |
| Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
![]() | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | |
| For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | |
| Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz Power Con (Engine Management) -BPC11 | |
| Power Controller. Simple plug in (via connector) boost up and power increase. Designed to work within the control range of the standard ECU. | $ 223.11 |
![]() | Blitz R-FIT (Engine Management) -15120 | |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
![]() | Blitz Thro Con-Power Con Connection Harness (Engine Management) -14797 | |
| Optional harness for connection of Blitz Thro Con to Blitz Power Con. By connecting Thro Con and Power Con with this harness, Thro Con's "smart mode (all five modes)" which controls the accelerator response according to the engine load becomes available. By setting Thro Con option, it becomes possible to switch on/off the operation of Power Con according to accelerator (throttle) angle. It becomes possible to control only turn on modes only when necessary for more power, or to reduce the burden on the engine. | $ 15.59 |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Type II for Turbo (Engine Management) -16401306 | |
| For use with Trust GReddy e-Manage Ultimate. -99~3.0kPa. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | |
| DISCONTINUED |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | |
| Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
![]() | Blitz E-ESC (Other Controllers) -16087 | |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | Blitz Idling Stop Jumper (Other Controllers) -15800 | |
| Blitz's idling stop jumper cancels standard idle stop function automatically each time the engine is started, without any user input. Easy installation that only connects three of power supply, ground, and signal wires. Return to standard control is accessed by a simple operation when the Idling Stop Jumper function is not required. | $ 50.17 |
![]() | Blitz Power Thro (Other Controllers) -BPT20 | |
| Throttle controller and power increase! Boost (turbo vehicles) or airflow sensor signal (naturally aspirated vehicles) is controlled and optimised with throttle angle by Blitz's proprietary technology . Economy, sports, auto and smart throttle modes (total 25 modes) to fine tune throttle control to your driving style. In addition to the 25 modes, when used with the optional Scramble Switch (Sold separately), scramble mode can be accessed. When used with the optional harness (Sold separately), the Start Control System (SCS) function can be used. This features retains settings of the factory idling stop feature(on/off), and the SI Drive/Drive mode. Built in safety features which reverts to standard circuit should there be any fault. Designed for use with standard air cleaner or Blitz Air Filter/Air Cleaner Series. Kit is inclusive of Power Thro unit, Thro Con unit, controller and vehicle specific harness(s) (may not be not pictured). | $ 332.59 |
![]() | Blitz Reverse Cancel Harness (Other Controllers) -14879 | |
| For use with Blitz Throttle Controller / ver BLUE. Turns throttle controller into "OFF" mode when the vechicle is put in reverse gear. | $ 11.09 |
![]() | Blitz SCS Harness (Other Controllers) -14800 | |
| Start Control System Harness. Blitz throttle controller option part (compatible models only). Retains idling stop setting (on/off), and drive mode on Subaru SI Drive, Lexus Drive Mode Select etc for whenever you start your car. | $ 16.63 |
![]() | Blitz Sma Thro (Other Controllers) -BSSP2 | |
| Smart Thro-Con (Smart Throttle Controller). Compact on/off switch for 1 of 10 throttle modes. Switch can be installed in one of three configurations (some models include bundled with service panel adapter). Plug and play installation with car specific harness. 10 modes: 8 ratio fixed modes, and 2 auto modes (Selectable by rotary switch on the side of main unit). Reverse cancel harness (sold separately) switches unit off when reverse is engaged. Function to select ON/OFF at each engine start is also enabled when used with the reverse cancellation harness. Equipped with safety functions such as normal return function. | $ 109.75 |
![]() | Blitz Sma Thro X (Other Controllers) -SXSP2 | |
| Throttle Controller. Smart Thro X is an affordable throttle controller that allows for smart installation. The compact ON/OFF switch can be installed in up to three ways. In addition to the switch itself and adapter, some part numbers include a service panel adapter for even smarter installation to specific vehicle models. Apart from the eight fixed ratio modes, there are two auto modes, making for a total of 10 modes. Switch between modes using the rotary switch on the main unit. In auto mode, the throttle opening is automatically controlled according to the situation, resulting in a smooth, seamless drive. Installation is plug-and-play design that connects to the vehicle's sensor harness. Includes a dedicated harness for each vehicle model. Power-saving circuitry eliminates the need for 12V power wiring. Direct control by a newly adopted high-performance full microcomputer improves tracking and responsiveness to vehicle signals compared to previous products. Acceleration and deceleration changes in response to accelerator operation are smoother. With the flip of a switch, you can also switch between ON/OFF start settings when starting the engine. By connecting the reverse cancel harness (sold separately), you can also use the safety feature that returns to normal when reverse gear is engaged. The built-in buzzer makes setup easier, and the newly designed control circuit makes it compatible with vehicles that were not previously compatible. | $ 128.88 |
![]() | Blitz Thro Con (Other Controllers) -BTSP2 | |
| Throttle Controller. In addition to standard 20 modes including auto mode, Blitz Thro Con also supports options such as newly developed start control system. High visability VA type liquid crystal display. 20 modes are installed as standard. Different control methods and different characteristics realize the throttle feel that suits your taste. The "hybrid model" has control ratio settings tuned specifically for hybrid vehicles. "Simple mode function" displays only your 5 favorite modes to be used frequently, is installed from the 20 modes. By setting in advance, you can save time and effort at the time of mode selection. In addition to the standard 20 modes, "Scramble mode" that raises the ratio to the maximum is installed (Separately sold option part is necessary). "Start Control System (SCS)" function is available by connecting optional SCS harness (Sold separately). This makes it possible to retain the cancellation state of standard idling stop and retain the initial mode of SI drive and drive mode selection as you wish (on equipped vehicles). Should trouble occur in the power supply wiring, the safety function reverts back to the normal circuit immediately. | $ 221.72 |
![]() | Blitz Thro Con Scramble Switch (Other Controllers) -14799 | |
| Throttle Controller Scramble Switch. Option part that allows access to scramble modes in compatible Blitz throttle controllers. Push the switch to instantly access high performance ratio mode (Higher than the normal SPORT MAX mode) for situations where rapid acceleration is required immediately. Once accessed, throttle controller will display countdown. Scramble time can be set to either 30 seconds, 180 seconds, or always on (scramble mode activated until switch is turned off). | $ 20.79 |
![]() | HKS SEC (Other Controllers) -45012-AH001 | |
| Suspension Error Canceller. Stops suspension system problem error code from display when using aftermarket dampers/coilover suspsension. | DISCONTINUED |
![]() | HKS SEC II (Other Controllers) -45012-AH002 | |
| Suspension Error Canceller II. Stops suspension system problem error code from display when using aftermarket dampers/coilover suspsension. | $ 251.96 |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | |
| $ 73.45 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | |
| $ 115.02 |
![]() | PIVOT 3-DRIVE (Other Controllers) -3-DRIVE | |
| Throttle controller. | DISCONTINUED |
![]() | PIVOT 3-DRIVE Car Specialized Harness (Other Controllers) -TH-7B | |
| Car specific harness, for bolt on installation of PIVOT 3-DRIVE throttle controllers. | $ 31.84 |
![]() | PIVOT 3-DRIVE Compact More Info (Other Controllers) -THC | |
| High performance, low cost, all in a compact body. | DISCONTINUED |
![]() | PIVOT 3-DRIVE EVO (Other Controllers) -3DE | |
| Throttle controller with no OBD Connection necessary! All-in-One design means most value for your money. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving. | $ 128.88 |
![]() | PIVOT 3-DRIVE Extension Cable (Other Controllers) -THC-EC | |
| 1m extension cable for 3-DRIVE Car Specialized Harnesses. For use with: PIVOT 3-DRIVE EVO, 3-DRIVE LIGHT, 3-DRIVE COMPACT and 3-DRIVE AC. | $ 15.24 |
![]() | PIVOT 3-DRIVE Flat More Info (Other Controllers) -THF2 | |
| Ultra thin compact throttle controller for a sleek, clean look. | DISCONTINUED |
![]() | PIVOT 3-DRIVE PRO (Other Controllers) -3DP | |
| Throttle controller with no OBD Connection necessary! Low-Profile Controller allows discrete installation. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving. | $ 165.60 |
![]() | PIVOT 3-DRIVE X More Info (Other Controllers) -3-DRIVE-X | |
| World's first throttle controller with multi monitor for display of engine parameters. | DISCONTINUED |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | |
| Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | |
| DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | |
| DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | |
| For use with Okachan Water Temp oC. | DISCONTINUED |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | |
| DISCONTINUED |
![]() | ARK Design Meter Stand (Performance Meters) -01-0106X-L | |
| DISCONTINUED |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | |
| DISCONTINUED |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | |
| DISCONTINUED |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | |
| Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | |
| DISCONTINUED |
![]() | Blitz Touch-B.R.A.I.N. (Performance Meters) -15158 | |
| OBD multi monitor that can display up to 50 items of vehicle information by simply connecting to the failure diagnosis connector (OBD). 3.5 inch touch panel type TFT liquid crystal adoption. It is also excellent in expandability. Simple install - simply connect to OBD part with connector. A variety of beautiful graphics. "Racing" emphasizing visibility, "3D" incorporating near future design - 56 kinds of rich display methods such as "Eco" to support econmical driving. For software version 1.30+, "TOYOTA HYBRID" exclusive communication is available - displays data specific to the hybrid vehicles that would not normally be available. Multi-angle display (left, vertical, right) screen switching. Special holder is included as standard equipment for various mounting positions. microSD card slot and USB port enables data linkage/software update with PC. Option features: - Data logging on USB memory/micro SD card, data analysis via Blitz DATA LOGGING SOFT (Free download). . Real time loggin is available with use of Blitz PC Link Cable - sold separately. By connecting Blitz Sensor Junction Box (sold separately), unit can display additional sensor data (sensors sold separately). Includes Universal Monitor Holder. | DISCONTINUED |
![]() | Blitz Touch-B.R.A.I.N. Option Part (Performance Meters) -15162 | |
| $ 16.63 |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
![]() | HKS CAC Cute (Performance Meters) -44007-AK002 | |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | |
| DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | |
| $ 66.77 |
![]() | HKS OB-LINK Type-001 More Info (Performance Meters) -44009-AK002 | |
| Connects to vehicle's OBD II connector for display of vehicle data on iOS/Android via Bluetooth. "Carscope" and "OB-BRIDGE" applications available for download from iTunes/Google Play. In addition, the information is logged within its internal memory, and can be setup and accessed via the HKS OB LINK Log Manager app (available from iTunes/Google Play). | DISCONTINUED |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | |
| Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | |
| Part included with A/F Device (repair part). | $ 311.80 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | |
| Part included with A/F Device (repair part). | $ 112.25 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | |
| Part included with A/F Device (repair part). | $ 17.46 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | |
| DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | |
| For NA and Turbo. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | |
| DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | |
| DISCONTINUED |
![]() | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | |
| 10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | $ 66.01 |
![]() | PIVOT ATT (Turbo Timers) -ATT | |
| Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | |
| DISCONTINUED |
![]() | PIVOT SAT (Turbo Timers) -SAT | |
| Security Auto Timer. | DISCONTINUED |
![]() | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT TTX (Turbo Timers) -TTX | |
| Ultra compact design. | DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | |
| DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | |
| Separate type. | DISCONTINUED |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | |
| DISCONTINUED |
![]() | FET QRS III (Boss Kits) -FQS005 | |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
![]() | FET QRS III Steering Plate (Boss Kits) -FQS006 | |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | |
| $ 16.38 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | |
| DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | |
| For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | SPOON SPORTS Boss Switch Bracket Set (Boss Kits) - 78520-FKA-000 | |
| Most vehicles of today comes with controls of various functions (i.e., Cruise Control) installed on the steering wheel. This had become one of the reasons for owners to hesitate to customize their steering wheel for improved sports driving. As a solution, SPOON have released a steering boss and bracket set to relocate the various controls from the standard steering wheel to the boss. You can now enjoy the look and performance of SPOON's sports steering wheel (Sold separately) without giving up the convenient functions that came with the original steering wheel. | $ 450.93 |
![]() | SPOON SPORTS Steering Boss (Boss Kits) -78512-GK5-000 | |
| $ 174.47 |
![]() | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
![]() | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
![]() | Works Bell Boss Kit (Boss Kits) -226 | |
| Depending on vehicle, normal, airbag, and/or auto cruise types available. Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 77.79 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
![]() | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | |
| Steering wheel quick release system for competition cars. | $ 208.50 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
![]() | Works Bell Short Boss for Rapfix (Boss Kits) -226S | |
| Short type (low height) boss kit ideal for use with Works Bell Rapfix. Suitable for 70mm x 6 PCD (MOMO, OMP, SIMONI Racing) type steering wheels. | $ 91.27 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | |
| Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | |
| DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | |
| DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | |
| $ 1530.66 |
![]() | Honda Floor Carpet Mat - Design Type (Floor Mats) -08P16-TEA-010A | |
| $ 371.64 |
![]() | Honda Luggage Tray (Floor Mats) -08U45-TEA-000 | |
| $ 81.89 |
![]() | Honda Rubber Mat - High Edge Type (Floor Mats) -08P18-TEA-010 | |
| $ 50.39 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
![]() | MUGEN Sports Floor Mat Set (Floor Mats) -08P15-XNCD-K1S0-RD (Old: 08P15-XNCD-K0S0-RD) | |
| $ 293.22 |
![]() | MUGEN Sports Luggage Mat (Floor Mats) -08P11-XNCD-K1S0-RD (Old: 08P11-XNCD-K0S0-RD) | |
| Luggage room floor mat. | $ 157.79 |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | |
| $ 17.13 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | |
| On dash type. | $ 118.74 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | |
| $ 11.97 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | |
| $ 8.00 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | |
| $ 32.44 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | |
| DISCONTINUED |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | |
| DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | |
| Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | |
| $ 95.49 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | |
| $ 507.57 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | |
| DISCONTINUED |
![]() | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
![]() | SARD 4 Point Harness (Harnesses) -80221 | |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
![]() | SARD 6 Point Harness (Harnesses) -80223 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
![]() | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | |
| $ 29.61 |
![]() | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
![]() | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | |
| $ 519.04 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | |
| $ 110.55 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | |
| $ 116.22 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | |
| DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | |
| Set of 2. | $ 19.27 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | |
| 4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | |
| Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | |
| Pair. | $ 21.10 |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | |
| 4 x 4 point harness. | DISCONTINUED |
![]() | HKS Nano Cabin Filter More Info (Other) -70027-AH001 | |
| Replacement for standard air conditioner filter using newly developed Nanofiber. Nanofiber bonded textile filter collects the dust, pollen and also PM2.5. Filters against bacteria preventing mould growth. A layer of activated charcoal helps to absorb odors (not entirely). | $ 29.16 |
![]() | Honda Interior Panel (Other) -08Z03-TEA-000 | |
| $ 283.46 |
![]() | Honda Luggage Net (Other) -08L96-TEA-000 | |
| $ 31.50 |
![]() | Honda Side Step Garnish (Other) -08E12-TEA-000 | |
| $ 176.37 |
![]() | LAILE Beatrush Floor Panel (Other) -S74070FPS | |
| 2mm aluminium checker plate flat floor plate. Right hand drive vehicles only. | $ 183.62 |
![]() | MUGEN Door Inner Protector (Other) -83510-XNCF-K0S0 | |
|   | $ 63.75 |
![]() | MUGEN Engine Start Stop Switch (Other) -35881-XNH-K0S0 | |
| Replacement start/stop unit. Illuminates red when engine on. | $ 112.44 |
![]() | MUGEN Scuff Plate (Other) -84200-XNCD-K0S0-BK | |
| $ 74.96 |
![]() | SPOON SPORTS Blue Wide Rear View Mirror (Other) -76400-BRM-005 | |
| $ 41.06 |
![]() | BRIDE FO Type Super Seat Rail (Seat Accessories) -H047FO | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA seats. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. | $ 101.78 |
![]() | BRIDE FX Type Super Seat Rail (Seat Accessories) -H047FX | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
![]() | BRIDE MO Type Super Seat Rail (Seat Accessories) -H047MO | |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 134.04 |
![]() | BRIDE RO Type Super Seat Rail (Seat Accessories) -H047RO | |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 120.66 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | |
| $ 32.31 |
![]() | BRIDE XL Type Super Seat Rail (Seat Accessories) -H047XL | |
| For use with BRIDE ZIEG IV WIDE, ZETA III type-XL seats. Super low position (maximum -30mm). | $ 171.52 |
![]() | BRIDE XR Type Super Seat Rail (Seat Accessories) -H047XR | |
| For use with BRIDE Stradia II Wide (Stradia II type-XL) seats. | $ 144.75 |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | |
| DISCONTINUED |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
![]() | SPOON SPORTS Seat Rail (Carbon Bucket Seat) (Seat Accessories) -81100-FKA-R00 | |
| Seat rails for use with SPOON SPORTS Carbon Bucket Seat. | $ 406.92 |
![]() | SPOON SPORTS Seat Rail (Reclining Bucket Seat) (Seat Accessories) -81250-FK8-R00 | |
| Seat rails for use with SPOON SPORTS Reclining Bucket Seat. | $ 191.49 |
![]() | SPOON SPORTS Seat Side Cover (Seat Accessories) -ALL-81100-SC0 | |
| Protects the seat from wear and tear caused by getting in and out of the vehicle and from friction with the seat belt. Compatible with both left and right sides for installation on Spoon carbon bucket seats. | $ 77.79 |
![]() | MUGEN MS-C Full Bucket Seat and Seat Rail Set (Seats) -81500-XNRC-K0S0-D | |
| MUGEN MS-C and RECARO Seat Rail and Side Adapter Set. Achieves a high level of both rigidity and light weight, which can withstand the intense lateral G forces that occur during circuit driving. In addition, by optimizing the shape and thickness of the urethane for each part of the body, it also achieves both hold and comfort. The outer mesh fabric prevents stuffiness even during long drives. Meets FIA standards. | $ 1530.66 |
![]() | MUGEN MS-R Full Bucket Seat and Seat Rail Set (Seats) -81500-XNCF-K0S0-D | |
| MUGEN MS-R and RECARO Seat Rail and Side Adapter Set. | DISCONTINUED |
![]() | Prodrive Competition Seat (Seats) -55660011 | |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
![]() | SPOON SPORTS Carbon Bucket Seat (Seats) -ALL-81100-001 | |
| The SPOON CARBON BUCKET SEAT, which has been popular for many years, has been redesigned to further improve driving position and comfort. The seat is made of the same carbon kevlar material as before, and although it weighs only 5.9 kg, it can reliably withstand strong G-forces such as those on a circuit, contributing to precise driving. | $ 1104.84 |
![]() | SPOON SPORTS Reclining Bucket Seat (Seats) -ALL-81200-001 | |
| In sports driving, the driver’s seat is one of the most crucial parts of the vehicle, directly connecting the car and the driver. A full bucket seat used in motorsports allows the driver to instantly feel the car’s behavior, however, it can become an unbearable stress in street driving. SPOON developed their Reclining Bucket Seat to accommodate both worlds, track and street driving. The bucket seat was designed to allow the driver to feel the car’s behavior from the waist as well as cradling the driver at the shoulders to firmly secure optimum eye level. This seat uses the same breathable fabric as carbon bucket seats for maximum ventilation and comfort. | $ 913.36 |
![]() | HKS Carbon Shift Knob (Shift Knobs) -51999-AH001 | |
| $ 106.14 |
![]() | Honda Shift Knob (Shift Knobs) -08U92-TEA-010 | |
| $ 122.36 |
![]() | LAILE Beatrush Alumi Shift Knob Type-QGK (Shift Knobs) -A91015AB-QGK | |
| Billet aluminium shift knob, with alumite finish. Approx 138g. | $ 47.24 |
![]() | LAILE Beatrush Shift Boot Stopper (Shift Knobs) -S74208SBCB | |
| Stopper for keeping the shift lever boot from falling down, when using aftermarket shift knobs. Billet aluminium, with alumite finish. | $ 18.71 |
![]() | LAILE Beatrush Titanium Shift Boot Stopper (Shift Knobs) -S74208SBCV | |
| Stopper for keeping the shift lever boot from falling down, when using aftermarket shift knobs. Titanium. | $ 52.44 |
![]() | MUGEN Carbon Shift Knob 6MT (2016) (Shift Knobs) -54102-XLT-K2S0-BK | |
| 6 speed manual transmission models. | $ 108.97 |
![]() | MUGEN Leather Shift Knob 6MT (Shift Knobs) -54102-XMEB-K0S0-RD | |
| 6 speed manual transmission models. | $ 97.63 |
![]() | MUGEN Shift Knob Round 6MT (2016) (Shift Knobs) -54102-XLT-K4S0-RD | |
| 6 speed manual transmission models. | $ 62.49 |
![]() | SPOON SPORTS Shift Knob Aluminium (Shift Knobs) -ALL-54102-004 | |
| $ 43.31 |
![]() | SPOON SPORTS Shift Knob Duracon (Shift Knobs) -ALL-54102-005 | |
| $ 39.84 |
![]() | SEEKER Shift Boot Collar Evolution (Shifter Boots) -20100-EVO-000 | |
| Chrome plated, billet aluminium shift boot collar. Special "invisible" nut used to fix shift knob. * When used in combination with a shift knob where there is a step on the bottom (some standard knobs), the step is not hidden. | $ 32.88 |
![]() | MUGEN Quick Shifter (Shifter Kits) -54000-XNCD-K0S0 | |
| Quick shifter is optimized for sports driving, short stroke by change of shape of change lever and offset shift position to driver side. By changing the return spring and rigid mounting without using the mounting bush, we will further improve the feeling of moderation and realize a shift feeling with reliable and quick operability. | $ 194.01 |
![]() | SEEKER Heavy Shift Knob (Shifter Kits) -(GL)INSK-SEE-FK8-001 | |
| Stainless steel, titanium nitride (TiAIN) coated spherical type shift knob (47mm diameter). | $ 85.98 |
![]() | SEEKER Super Shift (Shifter Kits) -20200-FK8-000 | |
| Short stroke shift rod extension. Attached to standard shift rod. | $ 38.74 |
![]() | Blitz Sports Steering Wheel (Steering Wheels) -13530 | |
| DISCONTINUED |
![]() | Buddy Club P-1 Racing Sports Steering Wheel (Steering Wheels) -(GL)INSW-BUD-FK801 | |
| D shape, 12~16 inch. | $ 464.30 |
![]() | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
![]() | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
![]() | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | |
| D shape steering wheel. | $ 453.53 |
![]() | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | |
| Round shape steering wheel. | $ 535.42 |
![]() | MOMO MOD.08 (Steering Wheels) -M-58 | |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
![]() | MUGEN Sports Steering Wheel (Steering Wheels) -78501-XNCF-K0S0-R | |
| Original MUGEN design sports steering wheel with a focus on shape and material of various driving scenes from sports driving to winding. Stable operability is realized by a good grip in various grip positions. | $ 692.89 |
![]() | Nardi Personal Blitz (Steering Wheels) -P071 | |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
![]() | Nardi Personal Blitz Leather (Steering Wheels) -P075 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
![]() | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
![]() | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
![]() | Nardi Personal Neo Grinta (Steering Wheels) -P024 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
![]() | Nardi Personal Pole Position (Steering Wheels) -P002 | |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
![]() | Nardi Classic Punching Leather (Steering Wheels) -N005 | |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
![]() | Nardi Classic Smooth Leather (Steering Wheels) -N111 | |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
![]() | Nardi Classic Suede Leather (Steering Wheels) -N115 | |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
![]() | Nardi Personal Trophy (Steering Wheels) -P051 | |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | SARD Steering - D-shape (Steering Wheels) -80219 | |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
![]() | SARD Steering - Semi Deep (Steering Wheels) -80227 | |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
![]() | SEEKER RACING Spec. Steering Kit (Steering Wheels) -27000-STG-FK0 | |
| Sports type steering wheel kit. | $ 615.73 |
![]() | SPOON SPORTS Steering (Steering Wheels) -ALL-78500-000 | |
| SPOON x MOMO steering wheel. | $ 369.44 |
![]() | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
![]() | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
![]() | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
![]() | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
![]() | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
![]() | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
![]() | HKS Racing Suction (Air Filters) -70020-AH109 | |
| The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits. To maximise intake capacity, HKS has carefully revised their HKS Racing Suction Reloaded for each car model, delivering the ultimate intake system to further increase the power. Filters use the new hyper stealth frame, where the opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. | $ 448.80 |
![]() | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -WH-707B 59639 | |
| Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | $ 43.34 |
![]() | SPOON SPORTS Air Cleaner (Air Filters (Panel/OEM) Type) -17220-FK8-S00 | |
|   | $ 93.54 |
![]() | TRUST GReddy AIRINX GT (Air Filters (Panel/OEM) Type) -12552518 (HN-18GT) | |
| High performance standard replacement (drop in) air cleaner/filter. Special high performance dry type fiber filter drastically improves intake efficiency. High rigidity and durability are achieved by using a steel net laminate structure. Rubber frame provides excellent sealing performance, keeping dust out. High performance and high quality, at a reasonable price. Direct swap for the genuine (stock) air filter, and can be easily replaced. | $ 40.97 |
![]() | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | |
| DISCONTINUED |
![]() | HKS Suction Return Kit (Blow Off Valves and Kits) -71002-AH003 | |
| Optional kit to convert Super SQV Kits (Sold separately) to recirculating type. Allows the exhaust air to be returned to the suction, just like the standard air bypass valve. | $ 95.30 |
![]() | HKS Super SQV IV Kit More Info (Blow Off Valves and Kits) -71008-AH009 | |
| HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support modern turbocharged vehicles. | $ 243.77 |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | |
| DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | |
| Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV2 (Blow Off Valves and Kits) -11501672 | |
| Universal. Blow off valve unit only. GReddy Blow Off Valve FV2 inherits the floating valve structure that was popular in the previous model, while being improved with a more sophisticated design providing better maintainability and reliability. A fidget spinner is used to adjust the spring preload without tools and the hose union direction of the top cover can be adjusted 360° without tools. Can directly replace GReddy Blow Off Valve Type RS, RZ, and FV as the mounting flange and opening have the same dimensions. | $ 164.88 |
![]() | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | |
| Universal. Blow off valve unit only. | $ 152.37 |
![]() | Blitz Carbon Intake System (Induction Boxes and Ducts) -27023 | |
| High performance intake system with carbon duct and case that best fits to engine room by advanced forming technology. Carbon ducts duct case are lightweight, high in strength and even properly control intake air temperature. Duct and Designed to efficiently increase intake air pressure, sharp engine response is achieved. Performance proven stainless steel mesh filter is used, providing supreme inhalation efficiency and intake sound. | $ 945.48 |
![]() | HKS Cold Air Intake Kit (Induction Boxes and Ducts) -70026-AH006 | |
| $ 1077.13 |
![]() | SPOON SPORTS Carbon Air Duct (Induction Boxes and Ducts) -17228-FK8-000 | |
| $ 596.83 |
![]() | HKS Piping Kit More Info (Piping) -13002-AH001 | |
| For better durability and consistent boost pressure even under high boost conditions. Satndard plastic or rubber intercooler pipes can expand or crack under high boost levels. In addition to this, standard pipes have many bends which in some places are very tight radius which causes a lot of flow resistance and pressure drops. HKS Piping Kits are made of aluminum for increased durability and safety. The pipes have been redesigned to decrease the number of bends and to increase bend radius to minimize pressure loss and flow resistance. | $ 157.95 |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
![]() | TRUST GReddy Sports Catalyzer (Catalytic Converters / Straight Pipes) -10651001 | |
| High performance sports catalytic converter. | $ 1070.83 |
![]() | Blitz NUR-SPEC CUSTOM EDITION CR (Exhaust Systems (Cat Back)) -63174C | |
| Interchangeable tail (exhaust tip) muffler system. Replaces main silencer (muffler) portion of exhaust system. Maintains torque in the low to medium engine speed range by using the standard exhaust part, while allowing for increased power in the medium to high engine speed region. All stainless steel SUS304. Tip material: carbon red. | $ 1247.52 |
![]() | Blitz NUR-SPEC CUSTOM EDITION VS (Exhaust Systems (Cat Back)) -63174 | |
| Interchangeable tail (exhaust tip) muffler system. Replaces main silencer (muffler) portion of exhaust system. Maintains torque in the low to medium engine speed range by using the standard exhaust part, while allowing for increased power in the medium to high engine speed region. All stainless steel SUS304. Tip material: stainless steel. | $ 776.35 |
![]() | Blitz NUR-SPEC CUSTOM EDITION VSR (Exhaust Systems (Cat Back)) -63174V | |
| Interchangeable tail (exhaust tip) muffler system. Replaces main silencer (muffler) portion of exhaust system. Maintains torque in the low to medium engine speed range by using the standard exhaust part, while allowing for increased power in the medium to high engine speed region. All stainless steel SUS304. Tip material: titanium colour. | $ 926.27 |
![]() | Blitz NUR-SPEC CUSTOM EDITION VSR+CR (Exhaust Systems (Cat Back)) -63174D | |
| Interchangeable tail (exhaust tip) muffler system. Replaces main silencer (muffler) portion of exhaust system. Maintains torque in the low to medium engine speed range by using the standard exhaust part, while allowing for increased power in the medium to high engine speed region. All stainless steel SUS304. Tip material: titanium colour and carbon red. | $ 1033.35 |
![]() | FUJITSUBO AUTHORIZE RM+c (Exhaust Systems (Cat Back)) -270-52101 | |
| $ 1916.79 |
![]() | HKS Hi Power SPEC-L (Exhaust Systems (Cat Back)) -31019-AH006 | |
| Super lightweight (approx half the weight of standard muffler). Aggressive cannonball design wrapped with carbon at the tail. It is a pure sport muffler which has improvements in weight and output performance. | DISCONTINUED |
![]() | HKS Hi Power SPEC-L II (Exhaust Systems (Cat Back)) -31019-AH106 | |
| Light weight exhaust system comparable to the titanium systems. By utilizing ultra lightweight components each pipe and silencers the weight of the exhaust compared to standard is reduced from 30% up to 60% (Depending on vehicle), which leads to improved driving performance. Improved exhaust efficiency with a straight through structure greatly improves exhaust efficiency. HKS also design the exhaust for a sporty and comfortable sound based on each vehicle individual specifications. The Hi Power SPEC-L II features a titanium tail tip cover in place of carbon used in the original SPEC-L systems. Burnt titanium tail tips add to racy feel and HKS now offer an optional tail tip covers (Sold separately). | $ 781.71 |
![]() | HKS Hi Power SPEC-L II Option Finisher Cover (Exhaust Systems (Cat Back)) -34002-AK010 x 2 | |
| Optional tail tip cover for Hi Power SPEC-L II. | $ 114.64 |
![]() | HKS LEGAMAX Premium (Exhaust Systems (Cat Back)) -31021-BH003 | |
| Advanced Legamax with vehicle specific stylish tip design. Legamax Premium offers the performance benefits of a sports muffler with the class and elegance of a premium muffler. Every tail pipe design is customised per application to ensure that muffler has impact and becomes a focal point in the appearance of the vehicle, yet blends with the overall design of the car. Legamax Premium mufflers are constructed of SUS304 grade stainless steel to give a high lustre finish which is durable. Some applications also incorporate the latest automotive fashion trends by featuring titanium tail tips which adds to the premium appearance with its distinct look. | $ 828.95 |
![]() | KAKIMOTO Racing Class KR (Exhaust Systems (Cat Back)) -H713119 | |
| Leads performance in class, while being compliant to new (stricter) JASMA regulations. | $ 1058.23 |
![]() | KAKIMOTO Racing GT1.0Z Racing (Exhaust Systems (Cat Back)) -H113119 | |
| Ultra lightweight racing muffler (1.0mm thick piping). Competition use. | $ 655.10 |
![]() | KAKIMOTO Racing Inner Silencer (Exhaust Systems (Cat Back)) -RIS002 x 2 | |
| $ 74.96 |
![]() | KAKIMOTO Racing Regu.06&R (Exhaust Systems (Cat Back)) -H223119 | |
| JASMA compliant, without sacrificing performance. JASMA regulated, released in 2006, racing muffler. SUS304 main pipe. Titanium Face Tail - Special coated, titanium burn colour (Patent Pending). | $ 957.45 |
![]() | Real Speed Engineering Full Titan Muffler (Exhaust Systems (Cat Back)) -RB6090-HN06A | |
| Full titanium exhaust. | $ 867.37 |
![]() | Apex APEXi RS Evolution EXTREME (Exhaust Systems (Full)) -113B-H001J | |
| Racing Sports Evolution EXTREME Muffler. JASMA compliant. | $ 1333.18 |
![]() | MUGEN Sports Exhaust System (Exhaust Systems (Full)) -18000-XNCF-K0S0 | |
| DISCONTINUED |
![]() | SPOON SPORTS N1 Muffler Kit (Exhaust Systems (Full)) -18000-FK8-000 | |
| $ 1351.14 |
![]() | Apex APEXi GT Spec. Front Pipe (Front and Centre Pipes) -145-H002 | |
| SUS304. | $ 328.18 |
![]() | FUJITSUBO Front Pipe (Front and Centre Pipes) -610-52104 | |
| $ 336.24 |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | |
| DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | |
| DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | |
| $ 13.04 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | |
| Universal gear oil cooler kit. | $ 792.41 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | |
| Universal differential oil cooler kit. | $ 776.35 |
![]() | Daiwa Racing Labo Intercooler (Intercoolers) -DRLIA040050 | |
| $ 1439.95 |
![]() | HKS R TYPE Intercooler Kit (Intercoolers) -13001-AH004 | |
| R TYPE is designed for circuit use; ideal to use with a stock replacement type turbine to wastegate type large size turbine. This intercooler derives better turbine performance regardless the engine rpm during driving on a straight track and acceleration after cornering. The weight is approximately 25% lighter than a conventional product. Core features: 1. Inner Fins (triangular straight type) - Triangular straight type for less air flow pressure loss. 2. Outer Fins (triangular louver type) - Like S TYPE, triangular louver type for outer fins. Aluminium polished piping type kits available for some models. | $ 595.26 |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | HKS Oil Cooler Kit Black (Oil Coolers) -15004-AH104 | |
| $ 674.62 |
![]() | HKS S Type Oil Cooler Kit (Oil Coolers) -15004-AH004 | |
| Standard sandwich type oil cooler kit. Includes a built-in thermostat attachment, which is held in place by the oil filter. Oil Temperature/Oil Pressure Gauge (Meter) sensor attachment size: 1 x M12 x P1.25, 1 x PT1/8. | DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Kit (Standard Type) (Oil Coolers) -12054613 | |
| $ 439.04 |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | |
| 1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | |
| 1 piece. | DISCONTINUED |
![]() | TRUST Gear Oil Pump (Other) -12004820 | |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
![]() | TRUST GReddy Washer Tank (Other) -13506101 | |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
![]() | SPOON SPORTS Radiator Cap (Radiator Caps) -ALL-19045-001 | |
| $ 25.16 |
![]() | SPOON SPORTS SEP Radiator Hose (Radiator Pipes and Hoses) -19500-FK8-000 | |
| A damaged radiator hose possibly can lead to engine overheating. Thick-walled SEP is used for the molding material in these hoses, resulting an excellent performance from deformation and heat damage. With this SEP Radiator Hose, sports driving can be enjoyed without worrying about deformation and high load damage. | $ 156.53 |
![]() | Blitz Racing Radiator Type ZS (Radiators) -18874 | |
| All polished aluminium model. 42mm wide (2 core). - Low cost, lightweight, all aluminium radiator. Possible by new manufacturing method. - 42mm thick core and large tanks makes for substantial increase in cooling capacity. Designed for use with standard electic fans and shrouds (some models may require some modifications for fitting). - Polished finish on tanks. - 1/8PT sensor attachment hole. - New type outer fin enhances heat dissipation. - Designed specifically for each vehicle type, with optimised tube pitch (angle). - Anodised drain bolt and BLITZ radiator cap are included. | $ 369.63 |
![]() | Daiwa Racing Labo Radiator (Radiators) -DRLRA040050 | |
| $ 810.68 |
![]() | KOYO Type-F Radiator (Radiators) -KH083417 | |
| Full aluminium (core and tanks). 2 row 48mm (wide) core (8.6mm tube pitch). The new flasghip model of KOYO racing radiators, it is thinner and lighter, yet maintains the high heat dissipation performance of its predessor (Type-Z). Compared to Type-Z: - Better heat disspation due to improved air pressure loss (Approx 35%. - Approx 1kg lighter (dry weight, and 1.5~2kg lighter (with coolant), depending on model. - Less risk of interference with accessories and peripheral auxiliary equipment due to thinner core. - Lower pressure loss possibly reducing the burden on the radiator cooling fan and increase the air flow rate of the cooling fan. | $ 473.80 |
![]() | SPOON SPORTS Aluminium Radiator (Radiators) -19010-FK8-010 | |
| $ 715.57 |
![]() | TRUST GReddy Aluminium Radiator TW-R (Radiators) -12053803 | |
| 2 core wide tube design provides the same capacity as conventional 3 core designs. Cooling water capacity is more than twice standard, with greater flow. Weight is kept low due to the all aluminium construction. Suitable for street and circuit use. 1/8PT sensor boss. Polished tanks. | $ 306.13 |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
![]() | J's Racing SPL Low Temp Thermostat (Thermostats) -STT-K8 | |
| $ 78.74 |
![]() | SPOON SPORTS Thermostat (Thermostats) -19301-FK8-000 | |
| $ 70.23 |
![]() | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | |
| Universal transmission oil cooler kit. | $ 829.89 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
![]() | HKS Fine Tune V Belt (Belts and Chains) -24996-AK046 | |
| Using the latest in belt technology, these belts maintain engine condition, while improving engine room appearance. Increased durability at high temperatures which can be found in the engine bay of tuned vehicles. Increased performance in cold weather conditions. Lightweight and good friction tolerance properties, mean that excess tension is not required, while anti-sound properties reduces belt squeal. EPDM (Ethylene Propylene Diene Monomer) Rubber is used in the manufacture of these belts because of: - Better durability and performance in hotter or colder conditions with improved friction tolerance. - Much lighter than previous version of belt. - Short fiber mixture in rib rubber improves the performance over previous version. Compared to standard belts: High temperature durability: 4 times greater. Low temperature durability: 10 times greater. Abrasion resistance: 30% improved. Weight: 17% lighter. Noise: Less. | $ 61.10 |
![]() | HKS Carbon Engine Cover (Covers) -70026-AH013 | |
| $ 555.57 |
![]() | HKS Carbon Fuse Box Cover (Covers) -70026-AH015 | |
| $ 131.65 |
![]() | SPOON SPORTS Carbon Plug Cover (Covers) -12231-FL5-020 | |
| $ 357.47 |
![]() | SPOON SPORTS Head Cover (Covers) -12310-FK8-R00 | |
| $ 369.44 |
![]() | CUSCO Heavy Duty Pitching Stopper (Engine Mounts) -3C4 911 PS | |
| Suppresses the forwards and backwards movement of the engine and transmission assembly, improving traction. High quality billet aluminium with metal collar (Engine side, press fitted), and rubber bush (Body/bulkhead side, press fitted). | $ 119.18 |
![]() | SPOON SPORTS Engine Transmission Mount Set (Engine Mounts) -50800-FK8-000 | |
| $ 548.96 |
![]() | SPOON SPORTS K20C Complete Engine (Engine, Head and Short Block Assemblies) -10000-FK8-C00 | |
| Complete engine assembled using new genuine Honda/SPOON parts. Skilled mechanics assemble each engine with much higher tolerances than the original mass production units. | $ 7379.28 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | |
| DISCONTINUED |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | |
| DISCONTINUED |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | |
| DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | |
| DISCONTINUED |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | |
| DISCONTINUED |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | |
| $ 4.03 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | |
| $ 194.32 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
![]() | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | |
| $ 283.46 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | |
| Mount bracket. | $ 32.88 |
![]() | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900537 | |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | $ 112.94 |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | |
| Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
![]() | mature HIGHSPARK Ignition Coil (Ignition System Parts) -(GL)ENIP-MAU-FK8-01 | |
| Specially tuned ignition coils with modified coil design that raises the secondary voltage output. By outputting a high and stable secondary voltage, engine quietness, increased torque and response idle/low rpm, and high output during acceleration. | $ 195.39 |
![]() | OKADA Projects Plasma Direct (Ignition System Parts) -SD224111R | |
| Ignition coil with a built in high power amplifier. Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Plug and play installation. Compatible with OBD-II (On-Board-Diagnostics). | $ 538.56 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | |
| DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | |
| DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | |
| DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | |
| DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | |
| DISCONTINUED |
![]() | J's Racing T-REV System (Oil Breather Tanks) -TRS-K7 | |
| Crank case depressurisation device. Improve engine response and drive feel. As used in higher performance race car and race motorcycle engines. | $ 365.97 |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | |
| Universal kit. 1000ml. | $ 92.60 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | |
| Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | |
| Universal kit. 680ml. | $ 87.24 |
![]() | Blitz Racing Oil Filter (Oil Filters) -18713 (B-3374) | |
| A high-performance oil filter that Blitz has worked on, with a proven track record in filters for air cleaners. Durability above regulation level in JIS impulse durability tests. Designed exclusively for maximizing filtration performance of the filter itself. By increasing the filter strength, it corresponds to the high standard among all load conditions. | $ 22.52 |
![]() | HKS Oil Filter (Oil Filters) -52009-AK005 | |
| New concept oil filter improves oil pressure drop and flow properties. The oil pressure drop and flow properties are improved by approximately 30% compared to current sports oil filters. The stress on the engine is reduced for better engine response. Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance. HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines. Filter replacement is recommended every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace filters every 3,000 km ~ 5,000km. | DISCONTINUED |
![]() | MUGEN Oil Filter (Oil Filters) -15400-XK5B-0000 | |
| By optimizing the filter surface area, filter shape, etc. to eliminate the sludge (foreign matter) generated inside the engine as much as possible, the pressure loss is improved up to 10% (compared to standard). By adopting a filter material with a Y-shaped cross section of filter medium fiber, sludge is efficiently removed to prevent wear inside the engine. In addition, by using highly heat resistant acrylic rubber (gasket) and silicone rubber (anti drain), it also supports high oil temperature conditions of engines. | DISCONTINUED |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | |
| Power steering fluid tank. | DISCONTINUED |
![]() | HKS Super Fire Racing MR (Spark Plugs) -50003-MR45HLZ | |
| MR Series. Ruthenium Electrode. M12 Long reach high heat range tuning spark plug with protruding electrode. Inherits the best from existing M series and features ruthenium alloy electrode to provide a reliable spark for all vehicles, including vehicles with increased boost or lightly tuned vehicles. On top of extended lifetime, use of ruthenium alloy allows a better fuel burn, resulting in quicker throttle response, smoother idle and better cold starts. | $ 24.91 |
![]() | SPOON SPORTS Venturi Big Throttle Body (Throttle Bodies and Intake Parts) -16400-FK8-020 | |
| $ 704.86 |
![]() | HKS GT Sports Turbine Kit (Turbocharger Kits) -11004-AH006 | |
| $ 2575.47 |
![]() | SPOON SPORTS Big Turbocharger Kit (Turbocharger Kits) -18900-FK8-000 | |
| $ 1985.13 |
![]() | APP Direct Clutch Line System (Clutch Hoses) -GHC036 | |
| $ 46.23 |
![]() | SPOON SPORTS Clutch Slave Hose (Clutch Hoses) -46961-FK8-000 | |
| Stainless mesh hose, with teflon outer. High strength steel fittings. Provides for reliable clutch pedal feel. | $ 76.22 |
![]() | ATS Carbon Clutch (Triple Plate) More Info (Clutches) -CH233130-11 | |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. | $ 2964.94 |
![]() | ATS Carbon Clutch (Twin Plate) More Info (Clutches) -CH232130-11 | |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. | $ 2501.33 |
![]() | ATS Metal Clutch (Triple Plate) More Info (Clutches) -RH233130-11 | |
| ATS metal clutches are manufactured with the extensive experience ATS has in the performance drive train industry. Utilizing 230mm (9 inch) diameter metal clutch disc(s), the torque capacity has been significantly raised and the cushioning disc design ensures the very smooth engagement. From the discs to every bolt, all ATS parts are carefully selected to meet ATS's high standard of quality. In the process of manufacturing, extra attention is paid to ensure the clutch is very light, without increasing vibration levels, and without sacrificing its structural strength. The ATS metal clutch generates superior shift feel with excellent performance and durability. | $ 1649.71 |
![]() | ATS Metal Clutch (Twin Plate) More Info (Clutches) -RH232130-11 | |
| ATS metal clutches are manufactured with the extensive experience ATS has in the performance drive train industry. Utilizing 230mm (9 inch) diameter metal clutch disc(s), the torque capacity has been significantly raised and the cushioning disc design ensures the very smooth engagement. From the discs to every bolt, all ATS parts are carefully selected to meet ATS's high standard of quality. In the process of manufacturing, extra attention is paid to ensure the clutch is very light, without increasing vibration levels, and without sacrificing its structural strength. The ATS metal clutch generates superior shift feel with excellent performance and durability. | $ 1434.28 |
![]() | CUSCO Clutch Cover (Clutches) -00C 022 B3C4 | |
| $ 195.52 |
![]() | CUSCO Copper Disc (Clutches) -00C 022 R3C4 | |
| Copper clutch disc. | $ 160.25 |
![]() | CUSCO Copper Single Set (Clutches) -3C3 022 F | |
| Copper Single Disc and Clutch Cover Set. | $ 321.50 |
![]() | CUSCO Metal Disc (Clutches) -00C 022 C3C4H | |
| Metal clutch disc. | $ 175.36 |
![]() | CUSCO Metal Set (Clutches) -3C4 022 G | |
| Metal Disc and Clutch Cover Set. | $ 336.62 |
![]() | EXEDY Single Sports Series Clutch Cover (Clutches) -HC17T | |
| $ 195.52 |
![]() | EXEDY Single Sports Series Clutch Disc (Clutches) -HD17H | |
| $ 160.25 |
![]() | EXEDY Single Sports Series Clutch Set (Clutches) -HK10H | |
| Disc and cover set. Approximately 40% higher clamp load than the standard clutch. | $ 341.59 |
![]() | EXEDY Hyper Single EVO (Clutches) -HH07SDX | |
| By using lightweight, ultra-high strength fibers that are also used in body armor (bulletproof clothing), EXEDY increased the heat resistance of other raw materials and the combination of materials, making it possible to achieve high heat resistance in ultra-high temperature ranges. EXEDY succeeded in reducing weight while maintaining wear resistance and friction characteristics. Not only improving friction performance but also to lowering inertia of the clutch disc, improving shift feeling and extending the life of transmission synchronizers. | $ 685.33 |
![]() | ORC Honda Flywheel Bolt Set (Clutches) -90011-PCX-B01 x 8 | |
| For use with ORC Clutch. | $ 25.20 |
![]() | ORC Metal Series ORC-409 (Clutches) -ORC-409DB-HD0910-SE | |
| Single Plate Clutch. | $ 685.33 |
![]() | ORC Metal Series ORC-559 (Clutches) -ORC-559DB-HD0910-SE | |
| Twin Plate Clutch. ~630N/m(65kgf/m). | $ 947.68 |
![]() | ATS Carbon LSD (Differentials) -CHFB9521 | |
| $ 1649.71 |
![]() | ATS Metal LSD (New Type-R) (Differentials) -RHFB9521 | |
| New design provides strong but controlable lock and improved response to the the original LSD. Developed and tested in endurance races, sprint races, All Japan Gymkhana & Dirt Trial Championship events, the unique structure spreads oil over the entire plate maintaining performance in extreme conditions. Ideal oil lubrication is achieved by removal of the radial oil groove of the conventional outer claw plate. The new oil slow-through type S-type plates combine a polishing plate without distortion and an inner claw plate carved with a concentric grooves. Centrifugal force slowly moves the oil from the inside to the outside along the grooves, providing extremely ideal lubrication for LSD with high locking performance. By holding the oil on the friction surfaces with the concentric grooves, lock performance difference between when cold and warm is successfully minimised. By matching the polishing plate and the non-polishing plate (grooving/inner claw), the lock drag when the accelerator is off is halved. As a result, the transition time lag from free to lock is also halved to achieve a sharp and crisp lock feel. Combining with a sharp cam angle of 60 degrees and 70 degrees, the instant lock when the accelerator is applied realises a feel close to the lock reaction at the time of high initial or diff lock. Rough accelerator control is possible even during cornering because you do not feel the sudden lock reaction allowing for seamless, supple control experience. | $ 1434.28 |
![]() | CUSCO LSD Type RS More Info (Differentials) -LSD 3A9 F | |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 705.49 |
![]() | CUSCO LSD Type RS Spec F More Info (Differentials) -LSD 3A9 FT | |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 705.49 |
![]() | KAAZ LSD (Differentials) -DBH2030 | |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 861.70 |
![]() | KAAZ LSD Super Q (Differentials) -DBH2030SQ | |
| All the features of KAAZ standard type LSD with WPC treated clutch discs for further durability. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 979.81 |
![]() | OS Giken Super Lock LSD Spec-S (Differentials) -(GL)HA082-HA-S | |
| The OS Super Lock LSD is the culmination of over four years of extensive research and development leading to a revolutionary LSD design. With the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and combined with the patented lock timing system, the Super Lock LSD is able to achieve complete lock in a progressive, smooth, and quiet manner. This translates to quick, repeatable lap times, and performance. | $ 803.12 |
![]() | OS Giken Super Lock LSD Spec-X (Differentials) -(GL)HA082-HA-X | |
| Full order type. 1.1, 1.5 or 2 way. Lock timing, initial torque can be customised. The OS Super Lock LSD is the culmination of over four years of extensive research and development leading to a revolutionary LSD design. With the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and combined with the patented lock timing system, the Super Lock LSD is able to achieve complete lock in a progressive, smooth, and quiet manner. This translates to quick, repeatable lap times, and performance. | $ 856.66 |
![]() | SPOON SPORTS LSD Kit (Differentials) -41000-FL5-000 | |
| $ 1057.10 |
![]() | SPOON SPORTS Drive Shaft Set (Driveshafts) -42300-FK8-C00 | |
| The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure. The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances. This ensures a smooth power delivery and reliable service. | $ 1462.00 |
![]() | EXEDY Single Sports Series Flywheel (Flywheels) -HF04 | |
|   | $ 293.41 |
![]() | SEEKER Super Shift Collar SSC (Other) -20000-FK8-000 | |
| More direct shift feel by using these urethane collars in place of standard rubber items. | $ 27.40 |
![]() | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -3C4 311 A30 | |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $ 174.61 |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
![]() | APP Brake Line System (Brake Lines) -HB036-ST | |
| $ 178.95 |
![]() | ENDLESS Brake Lines (Swivel Racing Type) (Brake Lines) -EB532 | |
| Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $ 288.18 |
![]() | ENDLESS Brake Lines (Swivel Steel Type) (Brake Lines) -EB532SS | |
| Steel and stainless construction ensures durability and excellent reliability. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: Carbon Steel. Socket: Stainless. | $ 214.95 |
![]() | Project μ (Mu) Teflon Brake Lines (Brake Lines) -BLH-038AC | |
| Teflon hose, covered with stainless mesh hose, and PVC outer tube. | $ 165.41 |
![]() | SPOON SPORTS Brake Hose Set (Brake Lines) -01460-FK8-000 | |
| Stainless steel mesh hoses, excellent in withstanding pressure and heat allowing for stable pedal touch and control by minimizing expansion even at high temperatures. | $ 237.79 |
![]() | DIXCEL EC Type (Brake Pads) -EC 341225 | |
| EXTRA Cruise. Street/Winding (Normal) use. 0~450°. NAO (Non Asbestos Organic material). Low dust, squealing and rotor wear. Ideal for upgrade from standard pads. | $ 41.20 |
![]() | DIXCEL ES Type (Brake Pads) -ES 341225 | |
| EXTRA Speed. Street/Winding (Normal)/Winding (Hard) use. 0~600°. NAO (Non Asbestos Organic material). Ideal for highway/winding sports driving. | $ 43.84 |
![]() | DIXCEL M Type (Brake Pads) -M 341225 | |
| Street/Winding (Normal) use. 0~500°. Non Asbestos Ceramic material. Super low dust. Ideal for users who want low dust and higher control. | $ 89.82 |
![]() | DIXCEL Premium Type (Brake Pads) -P 341225 | |
| Premium pad that balances price and performance. Street/Winding (Normal) use. 0~500°. Ceramic composite (Copper Free, 2021 compliant). | $ 61.10 |
![]() | DIXCEL R01 Type (Brake Pads) -R01 341225 | |
| Ultra low heat conduction racing compound. For N1 racing, tarmac rallying and circuit use. 200~900°. HD (High Density) Graphite metallic material. Initialμ: 0.48, Averageμ: 0.38~0.43. | DISCONTINUED |
![]() | DIXCEL Special Endurance Compound R23C More Info (Brake Pads) -R23C 341225 | |
| Special Order Series. High temperature tolerance and endurance for mid-long distance racing (amateur level 4-7 hours). Greater than twice the endurance of RA Type compound. Carbon semi metallic material. Initialμ: 0.38, Averageμ: 0.30~0.35. | $ 385.50 |
![]() | DIXCEL RA Type (Brake Pads) -RA 341225 | |
| High performance, linear control racing compound. Race/rally/circuit use. 200~900°. Carbon semi metallic material. Initialμ: 0.51, Averageμ: 0.40~0.45. | $ 170.45 |
![]() | DIXCEL RE Type (Brake Pads) -RE 341225 | |
| ABS specific high performance, linear control racing compound. Ideal for sprint race/rally/circuit use. 200~900°. Carbon semi metallic material. Initialμ: 0.51, Averageμ: 0.40~0.45. | $ 205.73 |
![]() | DIXCEL RN Type (Brake Pads) -RN 341225 | |
| Rear pad compound specific for FF vehicles. N1 racing/Circuit use. Non asbestos material. Lower μ rsults in better overall balance and prevention of locking. | $ 99.90 |
![]() | DIXCEL S Type (Brake Pads) -S 341225 | |
| Street/Winding (Normal/Hard) use. 0~700°. Non Asbestos low steel material. Offers a good balance of initial effectiveness and touch. The definitive street and sports pad! | $ 83.78 |
![]() | DIXCEL Specom Alpha More Info (Brake Pads) -SPA 341225 | |
| Racing compound as used in Super GT and Formula racing. Designed for use with race cars without brake master cylinder. Provides greater control under release phase of brake operation. Carbon semi metallic material. Initialμ: 0.55, Averageμ: 0.43~0.48. | DISCONTINUED |
![]() | DIXCEL Specom Beta More Info (Brake Pads) -BE 341225 | |
| Racing compound as used in Super Taikyu (Endurance) racing. Consistent pedal touch and control over long operation periods providing driver with confindence. Carbon semi metallic material. Initialμ: 0.48, Averageμ: 0.40~0.43. | $ 230.92 |
![]() | DIXCEL Specom GT More Info (Brake Pads) -SP-GT 341225 | |
| Racing compound as used in GT3/GT4 (Endurance) racing. Consistent, stable braking while eliminating ABS intervention. Carbon semi metallic material. Operating temperature: 200~900°. Initialμ: 0.51, Averageμ: 0.42~0.45. | $ 230.92 |
![]() | DIXCEL X Type (Brake Pads) -X 341225 | |
| Street/Winding (Normal)/Off road use. Ideal for heavier cars, mini van, SUVs and large wheel applications. 0~700°. Graphite metallic. | $ 104.94 |
![]() | DIXCEL Z Type (Brake Pads) -Z-341225 | |
| Street to circuit use. 0~850°. Graphite metallic material. High stopping power and controlable all round performance compound. | $ 115.02 |
![]() | ENDLESS CC-Rg (Brake Pads) -EP357CRG2 | |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 148.03 |
![]() | ENDLESS CC32 (Brake Pads) -EP357CC32 | |
| Circuit Compound. Low steel. 50~650°C. Average friction coefficient: 0.30~0.32. | $ 125.98 |
![]() | ENDLESS CC33 (S55G) (Brake Pads) -EP357CC33 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.28~0.33. | DISCONTINUED |
![]() | ENDLESS CC35 type-E (N84M) (Brake Pads) -EP357CC35E | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.30~0.35. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 228.02 |
![]() | ENDLESS CC38 (ME22) (Brake Pads) -EP357CC38 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.33~0.38. Based on the CC40 (ME20) compound, this variation with slightly lowered friction coefficient, allows for more control. Ideal for medium weight vehicles with high breaking loads or heavy vehicles on low speed circuits. | $ 142.99 |
![]() | ENDLESS CC40 (ME20) (Brake Pads) -EP357CC40 | |
| Circuit Compound. Semi metallic. 0~650°C. Average friction coefficient: 0.22~0.28. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 142.99 |
![]() | ENDLESS CC43 (N35S) (Brake Pads) -EP357CC43 | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.40~0.43. These brake pads deliver stable performance even under high temperatures and high loads, especially when used continuously with heavy vehicles, putting a large strain on the brakes. They pads are recommended for high-powered vehicles driving on circuits, where increased braking performance is desired. The material provides excellent control and stable braking force, enough to be used in the WRC. They also feature excellent release control with a moderate pedal stroke and a tactile feel. - Circuit driving for heavy vehicles weighing approximately 2 tons. - Circuit driving for high-powered vehicles. | $ 136.06 |
![]() | ENDLESS CC60 (N30C) (Brake Pads) -EP357CC60 | |
| Circuit Compound (Rally Use). Semi metallic. 150~800°C. Average friction coefficient: 0.50~0.60. | $ 139.52 |
![]() | ENDLESS MA22B (Brake Pads) -EP357MA22B | |
| Circuit. Hardened Ceramic Metal. 200~800°C. Average friction coefficient: 0.40~0.45. | DISCONTINUED |
![]() | ENDLESS MX72 (Brake Pads) -EP357MX72 | |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 132.91 |
![]() | ENDLESS MX72 PLUS (Brake Pads) -EP357MXPL | |
| Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 137.95 |
![]() | ENDLESS NEW Type R (Brake Pads) -EP357TRN | |
| Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | DISCONTINUED |
![]() | ENDLESS SR01 (Brake Pads) -EP357SR01 | |
| Sports pad with excellent controllability that is suitable for everything from city riding to driving events. Braking power from the moment you start driving. Street~circuit use. Material: Low steel. Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.35~0.40. | $ 117.79 |
![]() | ENDLESS SSM (Brake Pads) -EP357SSM | |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
![]() | ENDLESS SSM PLUS (Brake Pads) -EP375MP | |
| Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 132.91 |
![]() | ENDLESS SSS (Brake Pads) -EP357SS2 | |
| Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 87.56 |
![]() | ENDLESS SSY (Brake Pads) -EP357SY2 | |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
![]() | ENDLESS Type R (Brake Pads) -EP357TR | |
| Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
![]() | ENDLESS W-003 (Brake Pads) -EP357W003 | |
| Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 187.08 |
![]() | Project μ (Mu) B-SPEC (Brake Pads) -F506-BSP (Old: F360-BSP | |
| Street Sports. Reliable braking power and fade resistance suitable for sports driving, all at a reasonable price. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 84.47 |
![]() | Project μ (Mu) CLUBMAN SINTERED (Brake Pads) -F360-ClubmanSintered | |
| Circuit Race. Ideal for clubman racing or amateur endurance racing. Designed for high durability and heat resistance experienced during high load circuit racing. Material: Super alloy sintered. Temperature range: 350~1000°C. Friction coefficient: 0.28~0.35. | DISCONTINUED |
![]() | Project μ (Mu) COMP-B for Gymkhana (Brake Pads) -F506-GYM (Old: F360 GYM | |
| Compound dedicated to the gymkhana competition, pursuing the pleasure of freely controlling the vehicle. Competition. Carbon metal. Front: 0~450°C. Friction coefficient: 0.38~0.49. Rear: 0~400°C. Friction coefficient: 0.48~0.60. | $ 103.37 |
![]() | Project μ (Mu) NS-C (Brake Pads) -F506-NSC (Old: F360-NSC | |
| Street. Non steel. 0~400°C. Friction coefficient: 0.34~0.38. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $ 75.02 |
![]() | Project μ (Mu) RACING 777 (Brake Pads) -F506-R777 (Old: F360-R777 | |
| Circuit Race. Carbon metal. 300~800°C. Friction coefficient: 0.40~0.55. | $ 131.71 |
![]() | Project μ (Mu) RACING 999 (Brake Pads) -F506-R999 (Old: F360-R999 | |
| Circuit Race. Carbon metal. 200~800°C. Friction coefficient: 0.42~0.59. | $ 131.71 |
![]() | Project μ (Mu) RACING-N+ (Brake Pads) -F506-RNPL (Old: F360-RNPL | |
| Circuit Race. Super Graphite Metallic. 100~800°C. Friction coefficient: 0.39~0.48. | $ 122.26 |
![]() | Project μ (Mu) RACING-N1 (Brake Pads) -F506-RN1 (Old: F360-RN1 | |
| Circuit Race. Carbon metal. 100~800°C. Friction coefficient: 0.33~0.45. | $ 122.26 |
![]() | Project μ (Mu) Type HC-CS (Brake Pads) -F506-CS (Old: F360-CS | |
| Hyper Carbon - Circuit Spec. Street Sports. Carbon metal. 50~800°C. Friction coefficient: 0.41~0.50. | $ 122.26 |
![]() | Project μ (Mu) Type HC+ (Brake Pads) -F506-HCPL (Old: F360-HCPL) | |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. | $ 122.26 |
![]() | Project μ (Mu) Type HC+ R3 (Brake Pads) -F506-R3 (Old: F360-R3) | |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. Significantly improved fade resistance of the HC series, covers everything from street to sports driving. In addition to stability in the high temperature range, this compound also allows greater pedal control by taking into account the characteristics of recent electronic control devices and ABS intervention. | $ 122.26 |
![]() | Project μ (Mu) Type PS (Brake Pads) -F506-PS (Old: F360-PS) | |
| Street Sports. Perfect Spec. Providing adequate braking power for street sports driving, while also being low dust and noise. Brake pedal feel and control performance are high across a wide range of light to heavy vehicle applications. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 108.09 |
![]() | SPOON SPORTS Brake Pad (Brake Pads) -45022-FK8-000 | |
| While maintaining wear resistance equivalent to standard pads, SPOON pads achieve stable braking performance and controllability is available from low temperature to high temperature range, while improving fade resistance. With almost no brake squeal after spirited driving, these pads can be used from road to circuit. | $ 124.72 |
![]() | SPOON SPORTS Brake Pad For Circuit (Brake Pads) -45022-FK8-C01 | |
| Made with semi-metal compound to maintain stable braking force at higher temperatures. Improved performance with quality loss suppression for an uninterrupted circuit driving compared to conventional braking systems. One of the main features of this compound is extended controllability, that helps you get those turns right using your brakes. Despite being a circuit product, based on a rotor temperature range of 50°C~750°C, this brake pad can be widely used in multiple conditions. Material: Semi-metal. Rotor temperature range: 50~750°. | $ 194.32 |
![]() | DIXCEL FCR FP Disc Rotor (Brake Rotors) -FP 332 5137 | |
| Stronger type plain disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). | $ 246.04 |
![]() | DIXCEL FCR FS Disc Rotor More Info (Brake Rotors) -FS 331 5137 | |
| Stronger type slit (6) disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). 12 slit type option available (Please contact us for further details). | $ 286.35 |
![]() | DIXCEL PD Disc Rotor (Brake Rotors) -PD 332 5137 | |
| Standard type, plain disc rotor with enhanced corrosion resistance (rust prevention). High quality but reasonably priced, ideal for those who want a little more performance than standard disc rotors. Pair of 2 (Left and right). | $ 188.88 |
![]() | DIXCEL SD Disc Rotor More Info (Brake Rotors) -SD 331 5137 | |
| Slit type disc rotor. 20% improved braking performance for greater stability. Pair of 2 (Left and right). | $ 235.96 |
![]() | ENDLESS BASIC SLIT Brake Rotor More Info (Brake Rotors) -ER532BS2 x 2 | |
| FC Forged (Heat treated). 1 (single) piece curving slit (Slotted) brake rotors. Ideal for users who wish to upgrade standard rotors for better stability/cooling performance in hard driving conditions. Pair of 2 (Left and right). ENDLESS blue high temp painted bell hats. Please note that shape and number of internal vanes varies between specific vehicle models. | $ 406.92 |
![]() | ENDLESS Racing CURVING SLIT Brake Rotor More Info (Brake Rotors) -ER532RCA x 2 | |
| Special carbon blended steel (heat treated) rotors and super high strength aluminium alloy bell housings. Curving slit (slotted). Pair of 2 (Left and right). Bell housing colour: Blue Alumite. | $ 1145.79 |
![]() | ENDLESS Racing E-SLIT Brake Rotor More Info (Brake Rotors) -ER532REA x 2 | |
| Special carbon and steel rotors and super high strength aluminium alloy bell housings. E SLIT ROTOR features a long slit that draws a gentle curve and an E slits that are lined up on the long slit. The long slit that smoothly cuts the pad and the E-slit that provides strong braking force double the shaving effect, so that the brake pad is always kept in an optimum state, and the braking force is further improved. When the long slit on the rotor surface disappears and the letter E rises, it is a sign for replacement (wear indicator). Through extensive testing, these rotors have excellent compatibility with ENDLESS ceramic carbon brake pads (MX72/MX72PLUS/CC-Rg) and suppresses the occurrence of judder. Pair of 2 (Left and right). Bell housing colour: Blue Alumite. | $ 1274.29 |
![]() | M&M Honda Lightweight 2 Piece Brake Rotor Kit (Brake Rotors) -00604-FK8-BF01 | |
| $ 1250.04 |
![]() | Project μ (Mu) SCR (Brake Rotors) -SCRH132 | |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 277.16 |
![]() | Project μ (Mu) SCR PRO (Brake Rotors) -GPRH132 | |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy. Suitable for circuit use. Pair of 2 (Left and right). This model uses a two-piece structure that is excellent in durability, heat resistance, and heat dissipation. High-alloy high-carbon FC cast iron greatly improves crack resistance. Original screw design achieves high heat dissipation. In addition, many hot air flow paths, and unlike other models, the fins are arranged at a slight angle to the center instead of perpendicularly, which increases the speed of the hot air flow and quickly dissipates heat. | $ 680.29 |
![]() | Project μ (Mu) SCR-GT (Brake Rotors) -GPRH132-F | |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 897.61 |
![]() | ENDLESS System Inch Up Kit (6 POT) More Info (Brake Upgrade Kits) -ECY6XFK8 (Old: EC6XFK8 ECZ6XFK8) | |
| 6POT big caliper with excellent cost performance that can accommodate rotors up to 370mm rotors. Caliper body is made from lightweight and highly rigid forged aluminum. Uneven wear of the brake pads is prevented and high controllability is achieved through the use of varying pistons. These features combined ensure stable braking force even in high-power tuned cars, and is the best match for street-spec sports cars equipped with high-output engines. 2 x Caliper (Alumite Blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Alumite Blue, Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2612.83 |
![]() | ENDLESS System Inch Up Kit (MONO 6 Sports TA) More Info (Brake Upgrade Kits) -EFY6XFK8 (Old: EFZ6XFK8) | |
| Updated version of MONO 6 Sports caliper. Using the latest processing technology, the outer brake fluid pipe has been eliminated as an obstruction to the flow path and prevents fluid leakage due to pipe breakage. Weight has been reduced and the stress balance has been improved (rigidity increased by 12%) compared to the original MONO 6 Sports caliper product. The caliper surface is 3D-cut, which is effective for heat dissipation while looking good. 2 x Caliper (Blue Coating), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit, Blue Alumite), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | DISCONTINUED |
![]() | ENDLESS System Inch Up Kit (MONO 6 Sports) More Info (Brake Upgrade Kits) -EF6XFK8 | |
| 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. | DISCONTINUED |
![]() | ENDLESS System Inch Up Kit (Racing MONO 6 TA) More Info (Brake Upgrade Kits) -FCYMXFK8 | |
| Outer pipeless version of Racing MONO 6 caliper. Low weight (3015g) and highly rigid forged monoblock 6POT calipers providing further rigidity compared to the Racing MONO 6 calipers. 2 x Caliper (Hard Alumite, Engraved ENDLESS logo), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (e-Slit, Turfram coat bell housing), 1 x Brake pad (Set - Left and right, SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 5194.16 |
![]() | ENDLESS System Inch Up Kit (Racing MONO 6) More Info (Brake Upgrade Kits) -EDYMXFK8 (Old: EDZMXFK8) | |
| Low weight (2930g) and highly rigid forged monoblock 6POT calipers. 2 x Caliper (Hard Alumite, Engraved ENDLESS logo), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (e-Slit, Turfram coat bell housing), 1 x Brake pad (Set - Left and right, SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 4476.07 |
![]() | SPOON SPORTS Rigid Collar (Bushes and Collars) -50261-FK8-000 | |
| Strengthens and increases chassis rigidity without going overboard and compromising the cars inherent handling characteristics. Rigid collars are simple in their shape, clever in their design, made from a aluminium alloy (kept confidential), provides performance is unbelieavble. Designed by Tatsura Ichichma of Spoon Japan. Rigid collar kits are simple to fit and low cost, without affecting the basic geometry of the body. The way the Rigid Collars works is simple. Bolt holes through the chassis panel and sub frame are normally too big as they were designed for ease of production in the factory. When the car leaves the factory, everything is new and tight and the chassis hardly moves. After a while, the bolts become slightly looser and movement between the panels begins. This is why an older vehicles fitted with new bushes, shocks and springs, still doesn't behave like a new car. Rigid Collars are a aluminium washer with a square outer taper that increases adhesion on the thinner flange portion in the middle. This fits between the moving panels and with a properly sized bolt (and bolt hole as part of the Rigid Collar) is crushed into place when tightened, joining the two panels and permanently stopping movement. Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer in an accident. | $ 130.07 |
![]() | SPOON SPORTS Zero Bump Steer Kit (Bushes and Collars) -51220-FK8-020 | |
| $ 144.56 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | |
| Performance damper unit only. | DISCONTINUED |
![]() | CUSCO Power Brace (Chassis Bars) -3C4 492 F | |
| $ 90.71 |
![]() | LAILE Beatrush Performance Bar (Chassis Bars) -S84070PB-F | |
| $ 103.30 |
![]() | LAILE Beatrush Titanium Performance Bar (Chassis Bars) -S84070PB-VF | |
| Lightweight titanium chassis strengthening bar. | $ 456.68 |
![]() | MUGEN Performance Damper (Chassis Bars) -50460-XNCF-K0S0 | |
| Performance dampers dampen the vibration of the car body, eliminating unpleasant micro-vibrations and noise improving steering stability. Overall better vehicle performance by providing high-quality ride comfort and steering stability. | $ 573.84 |
![]() | SPOON SPORTS Motion Control Beam (Chassis Bars) -50500-FKA-000 | |
| Improves the comfort and quality of street use, as well as turning performance during cornering, by controlling the rigidity of the front and rear ends of the body, where the torsion occurs most during driving, with a specially constructed damper. Motion control beam is fastened with a damper equipped with a special friction mechanism at the forefront of the front reinforcement and the rear end of the rear end panel. By installing a friction damper against the twist on the body side diagonal due to load movement, torsion of the body is significantly reduced, ensuring a certain level of rigidity. Although the normal reinforcement brace alone can secure rigidity, the fine vibration will increase. By installing this friction damper, the fine vibration is absorbed and a high-quality ride with no noise is realized. Large inputs work against the torsion of the body that occurs during cornering, and the high repulsion spring suppresses the torsion in the same way as a solid brace. Alternatively, a small input suppresses twisting finely by the elastic force of the friction plate. By controlling this non-constant torsional input separately, it is possible to perform a wide range of suppression. | $ 788.32 |
![]() | SPOON SPORTS Stiff Plate (Chassis Bars) -50260-FKA-000 | |
| $ 441.24 |
![]() | Blitz Damper ZZ-R (Coilover Kits) -92395 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | $ 1189.00 |
![]() | Blitz Damper ZZ-R Spec DSC (Coilover Kits) -93395 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with (up to) 96 levels of electronically controlled damper adjustment. | $ 1656.45 |
![]() | Blitz Damper ZZ-R Spec DSC PLUS (Coilover Kits) -98395 | |
| Full length adjustable, single cylinder (monotube) coilover suspension with (up to) 96 levels of electronically controlled damper adjustment. Equipped with G sensor and new motors. | $ 1952.22 |
![]() | HKS HIPERMAX MAX IV GT (Coilover Kits) -80230-AH009 | |
| The new Max IV sporty suspension. Awesome sporty drive with great control and comfortable ride in the street. It's perfect for daily street drive with style and performance. You and your passenger can have a comfortable ride even when lowered. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. "M Shaft" With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street or circuit. | DISCONTINUED |
![]() | HKS HIPERMAX MAX IV SP (Coilover Kits) -80250-AH003C | |
| Sport model but still comfortable on winding road applications. This "MAX IV SP" is the ultimate sport model for high grip radial tires. Information such as tire, road surface condition, and available traction are transfered straight to driver. It's a perfect street sport model suspension for people who love to drive fast but still want comfort. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and center of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. M Shaft (46mm normal type) With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range by optimizing the oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. Adopted Pillow Ball Upper Mount For more accurate and sharp steering. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street, circuit winding roads, highway, or the weight of the vehicle. | DISCONTINUED |
![]() | HKS HIPERMAX R (Coilover Kits) -80310-AH003 | |
| 9 years after the launch of HIPERMAX IV GT, new HIPERMAX R series brings together all the technical capabilities cultivated over the years by HKS providing good handling, traction and fit performance that is unrivaled by other brands. | $ 1817.03 |
![]() | OHLINS Cancellation Kit (Coilover Kits) -35020-25 | |
| Canceller kit for removing the error display that occurs when the standard shock absorber of a vehicle with electronically controlled suspension is removed. Coupler can be connected to the standard connector on the vehicle side. It boasts accurate operation and high durability. | $ 482.36 |
![]() | OHLINS Type HA (Coilover Kits) -(GL)SHCO-OHL-FK8-01 | |
| Screw type adjustable coilover system. | $ 2867.94 |
![]() | TEIN EDFC 5 (Coilover Kits) -EDK04-R6655 + EDK05-12120 + EDK08-P8514-14 | |
| Automatic and flexible adjustment with new Jerk-Reactive control for enhanced driving experience. EDFC5 utilizes jerk-reactive adjustment feature, which is developed as a part of industry-academia collaboration with Prof. Dai Watanabe of Shibaura Institute of Technology, successfully combining both sharp handling and comfortable ride, to automatically provide most desirable driving behavior for all drivers. AI (learning function) helps to realize suitable driving feel, without sense of discomfort, for all sorts of situations. In addition, EDFC5 employs new approach to control motors to reduce operating sound, to maintain quietness like original parts/components. Controller screen uses VA panel, as opposed to HTN panel used in previous models, for better looking and easy-to-read display. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 560.33 |
![]() | TEIN EDFC 5 and GPS Kit (Coilover Kits) -EDK04-R6655 + EDK05-12120 + EDK08-P8514-14 + EDK07-P8022 | |
| Automatic and flexible adjustment with new Jerk-Reactive control for enhanced driving experience. EDFC5 utilizes jerk-reactive adjustment feature, which is developed as a part of industry-academia collaboration with Prof. Dai Watanabe of Shibaura Institute of Technology, successfully combining both sharp handling and comfortable ride, to automatically provide most desirable driving behavior for all drivers. AI (learning function) helps to realize suitable driving feel, without sense of discomfort, for all sorts of situations. In addition, EDFC5 employs new approach to control motors to reduce operating sound, to maintain quietness like original parts/components. Controller screen uses VA panel, as opposed to HTN panel used in previous models, for better looking and easy-to-read display. GPS kit allows longitudinal and lateral G-actuated and speed-sensitive automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 608.51 |
![]() | TEIN EDFC Active (Coilover Kits) -EDK04-P8021 + EDK05-12120 + EDK08-P8514-14 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal G-actuated automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN EDFC Active and GPS Kit (Coilover Kits) -EDK04-P8021 + EDK05-12120 + EDK08-P8514-14 + EDK07-P8022 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor and optional GPS kit allows longitudinal G-actuated and speed-sensitive automatic adjustment of damping force while driving. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN EDFC Active PRO and GPS Kit (Coilover Kits) -EDK04-Q0349 + EDK05-12120 + EDK08-P8514-14 + EDK07-P8022 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor and optional GPS kit allows longitudinal and lateral G-actuated and speed-sensitive automatic adjustment of damping force while driving. PRO features: individual adjustment of 4 shock absorbers, vehicle speed pulse input and 2 additional input ports. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 501.43 |
![]() | TEIN EDFC ActivePRO (Coilover Kits) -EDK04-Q0349 + EDK05-12120 + EDK08-P8514-14 | |
| Electronic Damper Force Controller Active. Built-In G-Sensor allows longitudinal and lateral G-actuated automatic adjustment of damping force while driving. PRO features: individual adjustment of 4 shock absorbers, vehicle speed pulse input and 2 additional input ports. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | $ 453.24 |
![]() | TEIN EDFC II (Coilover Kits) -EDK04-P9669 + EDK05-12120 + EDK08-P8514-14 | |
| Electronic Damper Force Controller II. For use with TEIN suspension compatible with EDFC. Controller and Motor Kit. | DISCONTINUED |
![]() | TEIN FLEX A (Coilover Kits) -VSHK8-D1AS4 | |
| Full spec high end coilover system featuring hydraulic bump stopper (H.B.S.) mechanism. Full comfort even for fully loaded (passengers) vehicles. Full length, and damping force adjustable. | $ 1178.33 |
![]() | TEIN MONO RACING (Coilover Kits) -VSHK8-K1NS4 | |
| Sports shock absorber with customizable settings, reflecting customer feedback on TEIN's flagship products. Mono tube. Full length and damping force adjustable. MONO RACING is developed to satisfy the drivers who frequently take their cars for a spin at the race tracks. Based on the settings of the high-end model SUPER RACING and on a wealth of data gained through participation in various motorsports, spring rates and damping force for MONO RACING are determined to be most suitable for sports driving. | $ 1515.21 |
![]() | MUGEN Reservoir Tank Cover (Other) -90000-XYL-513A | |
| Brake/clutch reservoir tank cover that absorbs liquid leakage due to various factors during driving. Aramid fire reesistant material is used to ensure high safety. Sold individually. | $ 17.64 |
![]() | MUGEN Reservoir Tank Cover (Old) (Other) -90000-YZ7-0054 | |
| Sold individually. | DISCONTINUED |
![]() | Project μ (Mu) P.MU Master Cylinder Cap (Other) -ACC-TC21 | |
| A simple design that simply covers the standard cap. Green alumite color finish that can be attached to various car models (if the size matches). | $ 28.09 |
![]() | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | |
|   | $ 12.60 |
![]() | PROVA Resevoir Tank Cover (Other) -90000JL0200 | |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
![]() | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | |
| Mechanical lifter kit. | DISCONTINUED |
![]() | SPOON SPORTS Reservoir Tank Cover (Other) -ORG-90000-020 | |
| Prevents paint damage and dirtyengine bay caused by brake/clutch fluid leaks. Must-have item for circuit driving. | $ 21.16 |
![]() | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
![]() | RS-R RS-R Down Suspension Coil (Springs) -H059D | |
$ 219.21 |
![]() | RS-R Ti2000 Suspension Coil (Springs) -H059TD | |
| Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. | $ 317.47 |
![]() | SPOON SPORTS Progressive Spring (Springs) -51400-FK8-001 | |
| Set of 4 progressive rate springs. | $ 318.10 |
![]() | TANABE SUSTEC GT Fun To Ride Spring (Springs) -FK8FK | |
| Set of 4. | $ 183.30 |
![]() | TEIN S.TECH Springs (Springs) -SKHK8-S1B00 | |
| Dress Up Master. Easy lowering springs, in green to brightly decorate your suspension. Simple suspension tuning for beginners - at an affordable price. | $ 225.50 |
![]() | Blitz Strut Tower Bar (Strut Tower Bars) -96167 | |
| $ 100.63 |
![]() | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -3C4 540 A | |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 79.18 |
![]() | J's Racing Strut Tower Bar (Strut Tower Bars) -TB-K8-F | |
| $ 150.55 |
![]() | LAILE Beatrush Strut Tower Brace (Strut Tower Bars) -S84070-FTA | |
| Strut tower bar. | $ 121.22 |
![]() | LAILE Beatrush Titanium Strut Tower Brace (Strut Tower Bars) -S84070-FTV | |
| Titanium strut tower brace. | $ 520.93 |
![]() | OKUYAMA CARBING Strut Tower Bar More Info (Strut Tower Bars) -611 245 0 | |
| $ 190.73 |
![]() | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
![]() | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
![]() | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
![]() | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | |
| $ 218.89 |
![]() | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | |
| DISCONTINUED |
![]() | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
![]() | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
![]() | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
![]() | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
![]() | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
![]() | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | |
| DISCONTINUED |
![]() | WORK Lock Nut Set (Wheel Nuts) -240254 | |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
![]() | WORK RS Nut (Wheel Nuts) -240007 | |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
![]() | KYO-EI Hub Bolt (Wheel Studs) -SBH-R x 10 | |
| $ 57.64 |
![]() | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | |
| $ 28.47 |
![]() | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | |
| $ 27.46 |
![]() | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | |
| $ 38.55 |
![]() | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
![]() | Honda OEM Accessories Hood Air Intake (Bonnets) -08F06-TGH-000 | |
| $ 755.88 |
![]() | MUGEN Carbon Aero Bonnet (Bonnets) -60100-XNCF-K0S0 | |
| $ 5669.10 |
![]() | MUGEN Front Bumper Garnish (Front Bumpers) -62600-XNCF-K0S0-ZZ | |
| $ 198.10 |
![]() | SPOON SPORTS Aero Bumper (Front) (Front Bumpers) -71101-FK8-000 | |
| $ 1146.42 |
![]() | SPOON SPORTS Aero Bumper (Rear) (Front Bumpers) -71501-FK8-000 | |
| $ 1040.59 |
![]() | Honda OEM Accessories Front Grille Garnish (Front Grilles) -08F21-TGH-000 | |
| $ 188.97 |
![]() | J's Racing Honda Emblem (Front Grilles) -75700-TGH-A01 | |
| Honda emblem. Requires J's Racing Emblem Mount if being used with J's Racing Front Sports Grill. | $ 26.91 |
![]() | J's Racing Emblem Mount (Front Grilles) -AG-K8-EM | |
| For mounting of standard Honda Emblem to J's Racing Front Sports Grill. | $ 84.72 |
![]() | J's Racing Front Sports Grille (Front Grilles) -AG-K8 | |
| Effective for reducing engine bay temperatures during sports driving. Adopted large (wider) intake shape. Vortex generators air flow improving the cooling capacity of the radiator and engine bay. Apart from the aesthetics, intake air temperature, water temperature and oil temperature are lowered. | $ 402.82 |
![]() | MUGEN Carbon Front Grille Garnish (Front Grilles) -75130-XNCD-K0S0 | |
| $ 651.95 |
![]() | MUGEN Front Under Spoiler (Front Spoilers (Lip Spoilers)) -71110-XNCF-K0S0-CW | |
| $ 430.85 |
![]() | MUGEN LED Tail Light (Lights (Head, Tail, Indicator)) -33500-XNCF-K0S0 | |
$ 598.40 |
![]() | Honda OEM Accessories Door Mirror Covers (Mirrors and Mirror Covers) -08R06-TGH-020 | |
| $ 88.19 |
![]() | MUGEN Carbon Door Mirror Cover (Mirrors and Mirror Covers) -76205-XNL-K0S0 | |
| Dry carbon door mirror cover designed to improve stability. Using numerical fluid dynamics (CFD) analysis, designed to regulate the flow of air received by the door mirror. | DISCONTINUED |
![]() | MUGEN Door Mirror Sticker (Mirrors and Mirror Covers) -08P48-XG8-K1S0 | |
| Carbon-like design, sporty exterior accent. Made from PVC. Grain processing. Set of 2. | $ 17.13 |
![]() | MUGEN Hydrophilic LED Mirror (Mirrors and Mirror Covers) -76200-XNCD-K0S0 | |
| Blue-colored mirror finish with multilayer coating improves sunlight and anti-glare effect during night time driving and reduces eye fatigue. Water adhering by hydrophilic coating utilizing photocatalytic technology is diffused into a film shape to ensure visibility in the rain. 1000R curvature lenses provide wide rear visibility. When turn signal is used, the LED built in the mirror surface will flash in conjunction with the turn signal. Standard mirror replacement. | DISCONTINUED |
![]() | SPOON SPORTS Aero Mirror (Mirrors and Mirror Covers) -76100-FKA-000 | |
| $ 994.30 |
![]() | SPOON SPORTS Blue Wide Door Mirror (Mirrors and Mirror Covers) -76203-FKA-030 | |
| Glare for following car headlights is greatly reduced by the blue tint. 900R curvature allows for wide rearward visibility. Installation is simple, attached using double sided tape. SPOON SPORTS logos (Right: blue, Left: yellow). | $ 70.23 |
![]() | OKUYAMA DASH Mud Flap (Mud Flaps) -550 245 0 | |
| Protects body and floor from mud and stones during off road rally. Lightweight and durable urethane (red). | $ 172.40 |
![]() | Garage Vary Universal Turbulator (Other) -30-4001 | |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
![]() | KENSTYLE Accent Screws (Other) -(GL)AS01 | |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
![]() | MUGEN Rear Under Spoiler (Rear Spoilers) -84111-XNCF-K0S0-CW | |
| $ 606.59 |
![]() | MUGEN Side Garnish (Side Skirts/Steps) -75300-XNCF-K0S0-CW | |
| $ 549.90 |
![]() | Honda OEM Accessories Tail Gate Spoiler (Spoilers/Wings) -08F02-TEA-071 (Old: 08F02-TEA-070) | |
| $ 1108.62 |
![]() | J's Racing 3D GT Wing (Spoilers/Wings) -DGW1-K8-W | |
| For mounting of standard Honda Emblem to J's Racing Front Sports Grill. | $ 2428.26 |
![]() | MUGEN Tailgate Spoiler (Spoilers/Wings) -84112-XNCD-K0S0 | |
| Wing spoiler attached to the upper end of the tailgate. | $ 481.87 |
![]() | MUGEN Wing Spoiler (Spoilers/Wings) -84112-XNCF-K0S0 | |
| $ 5102.19 |
![]() | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
![]() | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
![]() | SPOON SPORTS Crane Neck Wing (Spoilers/Wings) -84112-FK8-000 | |
| $ 2308.58 |
![]() | SPOON SPORTS Roof Spoiler (Spoilers/Wings) -68800-FK7-000 | |
| $ 457.62 |
![]() | Honda Door Visors (Window Visors) -08R04-TGH-000 | |
| $ 94.48 |
![]() | MUGEN Ventilated Visors (Window Visors) -72400-XNCD-K0S0 | |
| Ventilated door visors with excellent ventilation performance. When using standard door visors with the window slightly lowered, the air discharged from the front of the opening tends to swirl and flow back into the cabin from the rear of the opening. These ventilated visors have a rubber blade attached to the bottom end of the front visor body, which keeps the rear of the visor closed even when the window is slightly lowered (Top of the window above the rubber blade), and limits the opening position to the front, preventing the backflow of air discharged from the cabin. In addition, the negative pressure generated while driving efficiently promotes the exhaust of air from the cabin. It also greatly improves the comfort of using it as a visor, such as preventing the intrusion of raindrops that tend to get in when the window is open and rainwater splashed up by other cars. | $ 204.40 |
![]() | SPOON SPORTS Centre Cap for SW388 (2017) (SPOON SPORTS) -42703-CP01-BK | |
|   | $ 20.98 |
![]() | SPOON SPORTS SW388 (2017) (SPOON SPORTS) -42703-1895-40 | |
| Redesigned and released after discontinuation in 1999 due to closure of the Desmond factory in Russia. These new fully forged wheels are made entirely in Japan. Anodized matte black (Lighter and stronger than paint). Specially designed non flat hub surface - Spoon got hints from the human foot arch and cut the grooves on the arch on the inside surface to provide a space not in contact with the surface. This applies loads naturally and outwards to improve the fastening strength of the hub and the wheel. It is now possible to reduce the burden of shocks, wheels and hub knuckles. Also, by being pulled outward, the accuracy of the central axis after installation is increased, and design and function are also designed to prevent loosening of the hub bolt. | $ 675.88 |
![]() | FUJITSUBO EXH+ Hood Support (Bonnet Dampers) -070-52101 | |
| Titanium bonnet support/bonnet stay. | $ 155.59 |
![]() | MUGEN Door Handle Protector (Exterior Parts) -08P48-XG8-K0S0-S | |
| $ 22.80 |
![]() | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | |
| Universal. Pair (Left and right). | $ 95.05 |
![]() | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | |
| Universal. Pair (Left and right). | $ 149.29 |
![]() | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | |
| Universal. Pair (Left and right). | DISCONTINUED |
![]() | SARD Aero Blade (Exterior Parts) -61967 | |
| Sold individually (1 piece). | $ 20.31 |
![]() | SARD Front Bumper Canard (Exterior Parts) -61965 | |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
![]() | SARD Front Under Flap (Exterior Parts) -61966 | |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
![]() | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
![]() | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | |
| $ 217.69 |
![]() | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | |
| Gas/Petrol cap cover. | DISCONTINUED |
![]() | Blitz i-Burner Expansion Kit (Globes) -14566 | |
| DISCONTINUED |
![]() | Blitz i-Burner Spark Lights (Globes) -14565 | |
| DISCONTINUED |
![]() | SPOON SPORTS Oil Filler Cap (Oil Filler Caps) -ALL-15610-001 (Old: 15610-FK8-000) | |
| $ 47.90 |
![]() | TRUST GReddy Oil Filler Cap B-Type More Info (Oil Filler Caps) -13901505 GOC-B05 | |
| Machined from aluminum. Comes with a special tool that is convenient when the cap is hot or when the cap is difficult to remove. Includes O ring/seal. | $ 45.73 |
![]() | MUGEN Number Plate Bolts (Other) -75700-XG8-K0S0 | |
|   | $ 19.97 |
![]() | TRUST GReddy Cable Ties (Other) -18001742 | |
| GReddy logo cable ties. | $ 14.19 |
![]() | HKS Emblem (Stickers and Emblems) -51003-AK027 | |
| Silver. 87 x 35mm. | DISCONTINUED |
![]() | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
![]() | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | |
| ABS resin emblem of Tuned by HKS. Size:115mm x 19mm. | $ 28.22 |
![]() | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
![]() | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
![]() | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
![]() | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
![]() | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
![]() | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | |
| HKS logo on oil color. | $ 12.35 |
![]() | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
![]() | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
![]() | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | |
| Small-sized transcription sticker. | $ 12.35 |
![]() | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
![]() | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | |
| High brightness reflective sheet. | $ 24.76 |
![]() | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
![]() | MUGEN Metal Emblem (S) (Stickers and Emblems) -90000-YZ8-H606 | |
| Aluminium emblem. 15 x 110mm. | $ 15.43 |
![]() | MUGEN Metal Logo Emblem (Stickers and Emblems) -90000-YZ8-DV62-WH | |
| 20 x 165mm. | DISCONTINUED |
![]() | MUGEN MUGEN Commander Sticker A (Stickers and Emblems) -90000-YZ5-312A-Z4 | |
| $ 11.91 |
![]() | MUGEN MUGEN Power Sticker A (Stickers and Emblems) -90000-YZ5-311A-K5 | |
| $ 18.17 |
![]() | MUGEN Titanium Emblem (Stickers and Emblems) -90000-XYE-301A | |
| Gradation titanium burn colour. 15 x 110mm. | DISCONTINUED |
![]() | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
![]() | TOMEI 70 Sticker (Stickers and Emblems) -761031 | |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
![]() | TOMEI Emblem (Stickers and Emblems) -763000 | |
| 120 x 22mm. | $ 19.65 |
![]() | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
![]() | Top Fuel Emblem (Stickers and Emblems) -26735831 | |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
![]() | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | |
| DISCONTINUED |
![]() | Blitz Towing Strap (Tow Hooks/Straps) -13890 | |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
![]() | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
![]() | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | |
| $ 41.04 |
![]() | OKUYAMA CARBING Towing Belt (Tow Hooks/Straps) -303 245 0 | |
| Towing strap with car specific rod (adapter) for installation to standard tow hook mounting hole. | DISCONTINUED |
![]() | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
![]() | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
![]() | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | |
| Set of 4. | $ 19.84 |
![]() | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
![]() | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
![]() | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
![]() | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
![]() | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
Back | Back to TOP