|
|
|
Intake...
- Air Filters...
- Blow Off Valves
- Piping
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Due to size/weight restrictions,
oversized items cannot be shipped by EMS.
oversized items cannot be shipped by EMS.
Item discontinued. Stock no longer available.
Full Listing
| Categories: | |
Electronic Parts
 | Apex APEXi AVC-R (Boost Controllers) -420-A004 |  ITEM DETAILS |
| Acutator Valve Controller Type-R. | DISCONTINUED |
 | Blitz A/F Box (Boost Controllers) -15063 | ITEM DETAILS |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
 | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | ITEM DETAILS |
| High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
 | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | ITEM DETAILS |
| High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
 | Blitz External Voltage Input Harness (Boost Controllers) -15053 | ITEM DETAILS |
| Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | DISCONTINUED |
| Blitz Press Sensor Set (Boost Controllers) -19211 | ITEM DETAILS |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | $ 69.29 |
 | Blitz Remote Switch (Boost Controllers) -15045 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | ITEM DETAILS |
| Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
| Blitz SBC i-Color Spec S (Boost Controllers) -15080 | ITEM DETAILS |
| Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
 | Blitz SBC i-D Spec R (Boost Controllers) -15078 | ITEM DETAILS |
| Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
| Blitz SBC i-D Spec S (Boost Controllers) -15073 | ITEM DETAILS |
| Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
 | Blitz SBC Type R (Boost Controllers) -15039 | ITEM DETAILS |
| High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
 | Blitz SBC Type S (Boost Controllers) -15040 | ITEM DETAILS |
| High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
 | Blitz SBC Type S PLUS (Boost Controllers) -15044 | ITEM DETAILS |
| High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | DISCONTINUED |
 | Blitz SBC-DC (Boost Controllers) -15060 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz SBC-iD III (Boost Controllers) -15085 | ITEM DETAILS |
| Twin sequential solenoid. | DISCONTINUED |
| Blitz Temp Sensor Set (Boost Controllers) -19210 | ITEM DETAILS |
| Optional part for use with SBC i-Color. One set per SBC i-Color. | $ 69.29 |
 | Blitz Wireless Remote Switch (Boost Controllers) -15042 | ITEM DETAILS |
| Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
 | HKS EVC (Old) (Boost Controllers) -45003-AK001 | ITEM DETAILS |
| 4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
 | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | ITEM DETAILS |
| 4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
| HKS EVC Display Stand (Boost Controllers) -53002-AK001 | ITEM DETAILS |
| For use with display of HKS EVC. | $ 7.56 |
 | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | ITEM DETAILS |
| Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | $ 75.59 |
 | HKS EVC EZ II (Boost Controllers) -45003-AK002 | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | HKS EVC V (Boost Controllers) -45003-AK005 | ITEM DETAILS |
| 5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
| HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | HKS EVC VI (Boost Controllers) -45003-AK010 | ITEM DETAILS |
| 6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
| HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | ITEM DETAILS |
| DISCONTINUED |
| HKS EVC VI-IR (Boost Controllers) -45003-AK011 | ITEM DETAILS |
| 2.2 inch full colour TFT screen. | DISCONTINUED |
 | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | ITEM DETAILS |
| 2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | DISCONTINUED |
 | HKS EVC VII (Boost Controllers) -45003-AK013 | ITEM DETAILS |
| 7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | DISCONTINUED |
 | HKS EVC VII Option Parts (Boost Controllers) -45999-AK029 | ITEM DETAILS |
| Option/Repair parts for use with HKS EVC VII. | $ 22.55 |
 | HKS EVC VII-MR (Boost Controllers) -45003-AK016 | ITEM DETAILS |
| Revamped model of the high-end boost controller EVC VII. While retaining its wide range of functions, it now offers more precise control and improved response at high boost levels. | $ 408.18 |
 | HKS EVC-S (Boost Controllers) -45003-AK009 | ITEM DETAILS |
| DISCONTINUED |
 | HKS EVC-S2 (Boost Controllers) -45003-AK015 | ITEM DETAILS |
| The simple-to-operate boost controller EVC-S has evolved with a color LCD for excellent visibility. The display area is doubled compared to the previous EVC-S. A variety of displays that utilize dot displays enable intuitive operation and improve operability. Displays the function of each button during setup (button information display) and supports modification operations. Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D) making it easy to select boost according to the conditions. New features include circuit mode and scramble mode (Controlled by switching between two of the four boost settings) (Scramble mode is switched according to the set time). Added overtime setting to warning function - Warning control will not start unless the warning value has exceeded a set time, so the range of adjustment for warning control has been expanded. The maximum control boost is 250kPa and supports a wide range of boost control. Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting. | $ 250.95 |
 | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | ITEM DETAILS |
| DISCONTINUED |
| TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | ITEM DETAILS |
| For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
| TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | ITEM DETAILS |
| For use of Profec E-01 pressure sensor with e-Manage. | $ 10.23 |
 | TRUST GReddy Profec (Boost Controllers) -15500214 | ITEM DETAILS |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
 | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | ITEM DETAILS |
| Can be used in conjunction with Trust e-Manage. | DISCONTINUED |
 | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | ITEM DETAILS |
| Repair /service part for Profec (OLED screen). | $ 10.25 |
 | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Profec White (Boost Controllers) -15500219 | ITEM DETAILS |
| Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
 | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | ITEM DETAILS |
| For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
 | Apex APEXi AFC Neo (Engine Management) -401-A018 (Old: 401-A017) | ITEM DETAILS |
| Colour Display Airflow Converter. Does not include APEXi General Purpose Stand. | DISCONTINUED |
 | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | ITEM DETAILS |
| Super Air Flow Converter II. | DISCONTINUED |
 | Blitz R-FIT (Engine Management) -15120 | ITEM DETAILS |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
 | FIELD One Touch Connector (Engine Management) -CN-12 | ITEM DETAILS |
| ECU extension harness. Install electronic parts without damaging genuine ECU wiring. | DISCONTINUED |
 | HKS F-CON Harness (Engine Management) -4202-RT029 | ITEM DETAILS |
| For use with F-CON SZ, F-CON iS or F-CON V Pro. | $ 198.42 |
 | HKS F-CON V Pro Ver.3.4 + Power Writer Set (Engine Management) -42016-AK002 | ITEM DETAILS |
| Full control over fuel and ignition signals. Other optional functions can be used to control solenoid valves, relays, lamps, etc. Various output settings can be made with the power writer. You can also check engine information on the monitor. When performing boost-up or harder tuning, it is possible to rewrite data in real time, which is not possible with other companies' flash rewriting methods, and the setting workability is particularly good. Log function allows the user to keep a history of their driving data. By capturing standard engine sensor signals it is possible to control the engine. In order to use this product, you will need computer operation, knowledge of the vehicle/engine, and technical skills related to control. If the installation and settings are not performed correctly, the engine performance will not be achieved satisfactorily, and may even result in damage. This product is for professional use only, and specifications and settings will vary depending on the vehicle, installed parts, and usage environment. For this reason technical support specific to the application vehicle cannot be offered. For use with vehicles where HKS F-CON Harness (Sold separately) is available. Does not include maps. Requires tuning to suit application vehicle. Startup maps are available for some vehicles. Communications unit is tied to each F-CON V Pro unit (Not suitable for other F-CON V Pro units). Power Writer Software designed for use on computers with Microsoft Windows 7 and later, more than 2GB RAM, More than 1GB of hard disc space, USB port. | $ 1133.82 |
 | HKS F-CON V Pro Ver.4 + Power Writer Set (Engine Management) -42016-AK001 | ITEM DETAILS |
| Full control over fuel and ignition signals. Other optional functions can be used to control solenoid valves, relays, lamps, etc. Various output settings can be made with the power writer. You can also check engine information on the monitor. Analog Voltage Input: Throttle opening, water temp., air temp., and etc., 0 to 5V sensor can be input up to 20 channels. A/F Knocking Input: Connecting the A/F sensor (* option parts required) or knock sensor enables to measure the linear A/F or knock level. Built-in Air Pressure Sensor: Air pressure sensor is built-in to provide stable control under various environment conditions. Fuel & Ignition Control: Independent output control up to 8 channels, and sequential control is available up to 8 cylinders. DC Motor Output: Controlling the electronic control throttle of DC motor type, which is widely used for the stock automobiles, is available up to 2 channels. Other Output Control: Controlling the valve timing of HKS V-CAM system or stock system and boost pressure (*Option parts are required.) is available. Also, controlling the output up to 22 channels, relay, and warning notice is possible under an optional condition. Built-in Log Data Memory: 8MB of memory to save the log data is available. When performing boost-up or harder tuning, it is possible to rewrite data in real time, which is not possible with other companies' flash rewriting methods, and the setting workability is particularly good. Log function allows the user to keep a history of their driving data. By capturing standard engine sensor signals it is possible to control the engine. In order to use this product, you will need computer operation, knowledge of the vehicle/engine, and technical skills related to control. If the installation and settings are not performed correctly, the engine performance will not be achieved satisfactorily, and may even result in damage. This product is for professional use only, and specifications and settings will vary depending on the vehicle, installed parts, and usage environment. For this reason technical support specific to the application vehicle cannot be offered. For use with vehicles where HKS F-CON Harness (Sold separately) is available. Does not include maps. Requires tuning to suit application vehicle. Startup maps are available for some vehicles. Communications unit is tied to each F-CON V Pro unit (Not suitable for other F-CON V Pro units). Power Writer Software designed for use on computers with Microsoft Windows 7 and later, more than 2GB RAM, More than 1GB of hard disc space, USB port. | DISCONTINUED |
 | Power Enterprise CAMCON EX (Engine Management) -CC-EX0 | ITEM DETAILS |
| Cam & AFC & VTEC Controller. | DISCONTINUED |
| TRUST GReddy E-01 (Engine Management) -15500208 | ITEM DETAILS |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
 | TRUST GReddy e-manage (Engine Management) -15500510 (Old: 15500500) | ITEM DETAILS |
| TRUST Greddy e-manage (Blue). Piggy back engine management system that enables fuel adjustment to effeectively derive power regardless of power, from beginners to high end users. Requires e-manage Harness Kit - Injector and e-manage Harness Kit (Ignition) (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
 | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
| TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
| TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
 | TRUST GReddy e-manage Ultimate More Info (Engine Management) -15500501 | ITEM DETAILS |
| Engine Control Unit Manager ULTIMATE. The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. Requires harness kit (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
 | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
| TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
| TRUST GReddy e-manage Ultimate Pressure Sensor Type II for Turbo (Engine Management) -16401306 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. -99~3.0kPa. | DISCONTINUED |
| TRUST GReddy e-manage Ultimate Universal Harness Kit (Engine Management) -15901500 | ITEM DETAILS |
| Universal harness. For applications where no car specific harness is available. 18P, 14P, 12P connectors and wiring set. | DISCONTINUED |
| TRUST GReddy e-manage Ultimate Universal Harness Kit Type 2 (Engine Management) -15901510 | ITEM DETAILS |
| Universal harness. For applications where no car specific harness is available. With current reverse flow diode. 18P, 14P, 12P connectors and wiring set. | $ 106.71 |
 | TRUST GReddy e-manage Ultimate Vehicle Specific Harness (Engine Management) -15921504 | ITEM DETAILS |
| Plug and play harness. | $ 138.58 |
| TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
| TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
| TRUST GReddy e-manage Vehicle Specific Harness (Engine Management) -15910917 | ITEM DETAILS |
| Plug and play harness. Injector and ignition harnesses not required when using this product with TRUST e-manage. | DISCONTINUED |
 | TRUST GReddy Extension Harness More Info (Engine Management) -15911102 | ITEM DETAILS |
| ECU wiring harness extension for splicing in electronic parts, preserving your standard harness. Suitable for GReddy e-manage, GReddy e-manage Ultimate, GReddy v-manage, GReddy f-manage. | DISCONTINUED |
 | TRUST GReddy v-manage Kit (Engine Management) -15911606 | ITEM DETAILS |
| Car specific kit. Includes: v-manage unit, car specific harness and setting data. | DISCONTINUED |
 | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | ITEM DETAILS |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
 | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | ITEM DETAILS |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
 | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | ITEM DETAILS |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
 | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | ITEM DETAILS |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
 | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | ITEM DETAILS |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
| Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | ITEM DETAILS |
| DISCONTINUED |
 | Billion VFC II (Other Controllers) -BVTW-03 | ITEM DETAILS |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
 | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | ITEM DETAILS |
| Variable Fan Controller PRO DD. | DISCONTINUED |
 | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | ITEM DETAILS |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
 | Blitz E-ESC (Other Controllers) -16087 | ITEM DETAILS |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
 | HKS SLD (Other Controllers) -4502-RA003 | ITEM DETAILS |
| Speed Limit Defencer. | $ 114.64 |
 | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | ITEM DETAILS |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
 | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | ITEM DETAILS |
| $ 73.45 |
 | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | ITEM DETAILS |
| $ 115.02 |
 | PIVOT Fan Control Gauge (Other Controllers) -FCG | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | PIVOT Super Temp Controller (Other Controllers) -STC | ITEM DETAILS |
| Fan controller with water or oil temperature display. | DISCONTINUED |
 | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | ITEM DETAILS |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
 | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Relay Kit (Other Controllers) -15901400 | ITEM DETAILS |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
 | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | ITEM DETAILS |
| DISCONTINUED |
| Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | ITEM DETAILS |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
| Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | ITEM DETAILS |
| For use with Okachan Water Temp oC. | DISCONTINUED |
| ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design Meter Stand (Performance Meters) -01-0106X-L | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design MFD (Performance Meters) -01-0003X-00 | ITEM DETAILS |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
 | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz MMD i-Color (Performance Meters) -15062 | ITEM DETAILS |
| Multi Function & Multi Angle Display. | DISCONTINUED |
 | Blitz Power Meter iD III (Performance Meters) -15086 | ITEM DETAILS |
| DISCONTINUED |
 | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | ITEM DETAILS |
| DISCONTINUED |
 | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | ITEM DETAILS |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
| HKS A/F Sensor (Performance Meters) -44999-AK022 | ITEM DETAILS |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
| HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | ITEM DETAILS |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
 | HKS CAC Cute (Performance Meters) -44007-AK002 | ITEM DETAILS |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
 | HKS CAMP (Performance Meters) -4801-SA001 | ITEM DETAILS |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
 | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | ITEM DETAILS |
| DISCONTINUED |
| HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | ITEM DETAILS |
| $ 66.77 |
 | HKS OB-LINK More Info (Performance Meters) -44009-AK001 | ITEM DETAILS |
| Display/monitor car parameters from OB port via Bluetooth to your Android device (Not included, v2.1+). "Carscope" and "OB-BRIDGE" applications available for download from Google Play. | $ 81.76 |
 | HKS OB-LINK Type-001 More Info (Performance Meters) -44009-AK002 | ITEM DETAILS |
| Connects to vehicle's OBD II connector for display of vehicle data on iOS/Android via Bluetooth. "Carscope" and "OB-BRIDGE" applications available for download from iTunes/Google Play. In addition, the information is logged within its internal memory, and can be setup and accessed via the HKS OB LINK Log Manager app (available from iTunes/Google Play). | DISCONTINUED |
 | PIVOT Speed Meter X (Performance Meters) -SML-X | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
| PIVOT Speed Meter Z (Performance Meters) -SML-Z | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | SARD A/F Device (Performance Meters) -67502 | ITEM DETAILS |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
| SARD A/F Device A/F Sensor (Performance Meters) -67519 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 311.80 |
| SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 112.25 |
| SARD A/F Device Sensor Fitting (Performance Meters) -67517 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 17.46 |
 | SARD Analyzer-II (Performance Meters) -67515 | ITEM DETAILS |
| DISCONTINUED |
 | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | ITEM DETAILS |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
 | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | ITEM DETAILS |
| For NA and Turbo. | DISCONTINUED |
 | Blitz ASTT-X (Turbo Timers) -14360 | ITEM DETAILS |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
 | Blitz DTT-DCIV (Turbo Timers) -14369 | ITEM DETAILS |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
 | Blitz DTT-X (Turbo Timers) -14362 | ITEM DETAILS |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
 | Blitz FATT Advance + (Turbo Timers) -15043 | ITEM DETAILS |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
 | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | ITEM DETAILS |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
 | Blitz FATT-DCIV (Turbo Timers) -14368 | ITEM DETAILS |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
 | Blitz FATT-X (Turbo Timers) -14361 | ITEM DETAILS |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
 | HKS Turbo Timer Harness (Turbo Timers) -4103-RT007 | ITEM DETAILS |
| Turbo Timer Harness makes it easy and safe to install HKS Turbo Timers. Take out the key switch wiring connector and connect the HKS Turbo Timer Harness for easy and reliable connection. For use with HKS Turbo Timer Type 0/Type 1/X. | $ 12.09 |
 | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | ITEM DETAILS |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
 | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | ITEM DETAILS |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
 | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | ITEM DETAILS |
| 10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | $ 66.01 |
 | PIVOT ATT (Turbo Timers) -ATT | ITEM DETAILS |
| Auto Turbo Timer. | DISCONTINUED |
 | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | ITEM DETAILS |
| Full Auto Turbo Timer. | DISCONTINUED |
 | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT SAT (Turbo Timers) -SAT | ITEM DETAILS |
| Security Auto Timer. | DISCONTINUED |
 | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | ITEM DETAILS |
| Full Auto Turbo Timer. | DISCONTINUED |
 | PIVOT TTX (Turbo Timers) -TTX | ITEM DETAILS |
| Ultra compact design. | DISCONTINUED |
 | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | ITEM DETAILS |
| Separate type. | DISCONTINUED |
Interior Parts
 | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | FET QRS III (Boss Kits) -FQS005 | ITEM DETAILS |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
 | FET QRS III Steering Plate (Boss Kits) -FQS006 | ITEM DETAILS |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
 | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | ITEM DETAILS |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
 | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | ITEM DETAILS |
| $ 16.38 |
 | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | ITEM DETAILS |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
 | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | ITEM DETAILS |
| For use with regular boss kits (sold separately). | DISCONTINUED |
 | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
 | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | ITEM DETAILS |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
 | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
 | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
 | Works Bell Rapfix Flipper (Boss Kits) -103260 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
 | Works Bell Rapfix GTC (Boss Kits) -103270 | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
 | Works Bell Rapfix GTC-R (Boss Kits) -103282 | ITEM DETAILS |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
 | Works Bell Rapfix II (Boss Kits) -103030 | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
 | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | ITEM DETAILS |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
 | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
 | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
 | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
 | Works Bell Rapfix Racing (Boss Kits) -103330 | ITEM DETAILS |
| Steering wheel quick release system for competition cars. | $ 208.50 |
 | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
 | Works Bell Wiring Plate (Boss Kits) -103284 | ITEM DETAILS |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
 | SARD RD-1 (Clusters and Cluster Gauges) -67520 | ITEM DETAILS |
| Racing Display 1. | DISCONTINUED |
 | STACK ST8100 (Clusters and Cluster Gauges) -67000 | ITEM DETAILS |
| DISCONTINUED |
 | STACK ST8130 (Clusters and Cluster Gauges) -67003 | ITEM DETAILS |
| DISCONTINUED |
| STACK ST8130P (Clusters and Cluster Gauges) -67002 | ITEM DETAILS |
| $ 1530.66 |
 | HKS Kansai Floor Mat (Floor Mats) -KYT007 | ITEM DETAILS |
| Thick anti flammability material (FMVSS NO.302 test compliant) cut into shape to suit each specific vehicle type. Equipped with hoook holes and anti slip backing. Right hand drive models only. Made in Japan. | $ 110.93 |
 | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | ITEM DETAILS |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
 | Blitz Meter Holder (Gauge Mounts) -19160 | ITEM DETAILS |
| $ 17.13 |
 | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | ITEM DETAILS |
| On dash type. | $ 118.74 |
 | Defi Fitting Kit (Gauge Mounts) -DF05301 | ITEM DETAILS |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
 | HKS Display Stand (Gauge Mounts) -53002-AK001 | ITEM DETAILS |
| $ 11.97 |
| HKS Meter Cap (Gauge Mounts) -53002-AK002 | ITEM DETAILS |
| $ 8.00 |
 | HKS Meter Hood (Gauge Mounts) -5404-SA001 | ITEM DETAILS |
| $ 32.44 |
 | HKS Meter Stand (Gauge Mounts) -5404-SA006 | ITEM DETAILS |
| DISCONTINUED |
 | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | ITEM DETAILS |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
 | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | ITEM DETAILS |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
 | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | ITEM DETAILS |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
 | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | ITEM DETAILS |
| Meter not included. Includes double sided tape. | DISCONTINUED |
 | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | ITEM DETAILS |
| $ 95.49 |
 | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | ITEM DETAILS |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
 | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | ITEM DETAILS |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
 | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | ITEM DETAILS |
| $ 507.57 |
 | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | ITEM DETAILS |
| DISCONTINUED |
 | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | ITEM DETAILS |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
 | SARD 4 Point Harness (Harnesses) -80221 | ITEM DETAILS |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
 | SARD 6 Point Harness (Harnesses) -80223 | ITEM DETAILS |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
 | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | ITEM DETAILS |
| $ 29.61 |
 | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | ITEM DETAILS |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
 | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | ITEM DETAILS |
| $ 519.04 |
 | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | ITEM DETAILS |
| $ 110.55 |
 | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | ITEM DETAILS |
| $ 116.22 |
 | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | ITEM DETAILS |
| DISCONTINUED |
 | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
| TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
| TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | ITEM DETAILS |
| Set of 2. | $ 19.27 |
 | TAKATA FORMULA 6 (Harnesses) -73000-0 | ITEM DETAILS |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
 | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | ITEM DETAILS |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
 | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | ITEM DETAILS |
| 4 point harness. FIA Approved. | DISCONTINUED |
 | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | ITEM DETAILS |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
 | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | ITEM DETAILS |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
 | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | ITEM DETAILS |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
 | TAKATA RACE 2x2 (Harnesses) -94005-0 | ITEM DETAILS |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
 | TAKATA RACE 3x2 (Harnesses) -94004-0 | ITEM DETAILS |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
 | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
 | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | ITEM DETAILS |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
 | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | ITEM DETAILS |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-2 (Harnesses) -72000-0 | ITEM DETAILS |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | ITEM DETAILS |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-3 (Harnesses) -72004-0 | ITEM DETAILS |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | ITEM DETAILS |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA Shoulder Pads (Harnesses) -SP-301 | ITEM DETAILS |
| Pair. | DISCONTINUED |
 | TAKATA Stress Plate (Harnesses) -STP-01 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | ITEM DETAILS |
| Pair. | $ 21.10 |
 | TRUST GReddy Sports Harness (Harnesses) -16500004 | ITEM DETAILS |
| 4 x 4 point harness. | DISCONTINUED |
 | Blitz Hybrid Aircon Filter (Other) -18720 | ITEM DETAILS |
| World's first aircon filter using light catalyst for deodrisation of air. Replacement for standard aircon filter. Along with anti-bacterial properties, filters against dust and pollen. Washable (air dry). | $ 30.55 |
 | OKUYAMA CARBING Passenger Plate More Info (Other) -420 003 0 | ITEM DETAILS |
| 3mm aluminium. Attatched to floor carpet by velcro tape. | $ 110.23 |
 | BRIDE Import Side Stay (Seat Accessories) -A35NPO | ITEM DETAILS |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
 | BRIDE Side Stay (Seat Accessories) -A02NPO | ITEM DETAILS |
| $ 32.31 |
 | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | ITEM DETAILS |
| DISCONTINUED |
 | RECARO Side Protector (Seat Accessories) -7216966 | ITEM DETAILS |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
 | Prodrive Competition Seat (Seats) -55660011 | ITEM DETAILS |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
 | MOONFACE Super Lap Aluminium Shift Knob Ver I (Shift Knobs) -ONA02O | ITEM DETAILS |
| DISCONTINUED |
 | MOONFACE Super Lap Aluminium Shift Knob Ver II (Shift Knobs) -ONA02B | ITEM DETAILS |
| DISCONTINUED |
 | MOONFACE Super Lap AT Thread Adapter (Shift Knobs) -ONAD01 | ITEM DETAILS |
| M8 x P1.25 to M12 x P1.25 adapter. Allows for use of broader range of shift knobs. | $ 11.46 |
 | MOONFACE Super Lap Titanium Shift Knob Ver I (Shift Knobs) -ONT02O | ITEM DETAILS |
| $ 154.33 |
 | MOONFACE Super Lap Titanium Shift Knob Ver I (Polish) (Shift Knobs) -ONT02PO | ITEM DETAILS |
| $ 154.33 |
 | MOONFACE Super Lap Titanium Shift Knob Ver II (Shift Knobs) -ONT02B | ITEM DETAILS |
| DISCONTINUED |
 | Works Bell Paddle Shifter Neo (Shifter Kits) -528NEO | ITEM DETAILS |
| Works Bell Paddle shifter kit places specially designed carbon paddles which control up/down shifts on the steering column. Paddle stroke: 7mm. 20mm thick steering boss body (suitable for standard length boss kits). Paddle adjustment range: 15mm (left and right) to match size of steering wheel/hand size. Car specific kits are fully boly on install with no wiring modifications necessary. | DISCONTINUED |
 | Blitz Sports Steering Wheel (Steering Wheels) -13530 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
 | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | ITEM DETAILS |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
 | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | ITEM DETAILS |
| D shape steering wheel. | $ 453.53 |
 | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | ITEM DETAILS |
| Round shape steering wheel. | $ 535.42 |
 | MOMO MOD.08 (Steering Wheels) -M-58 | ITEM DETAILS |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
 | Nardi Personal Blitz (Steering Wheels) -P071 | ITEM DETAILS |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
 | Nardi Personal Blitz Leather (Steering Wheels) -P075 | ITEM DETAILS |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
 | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | ITEM DETAILS |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
 | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | ITEM DETAILS |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
 | Nardi Personal Neo Grinta (Steering Wheels) -P024 | ITEM DETAILS |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
 | Nardi Personal Pole Position (Steering Wheels) -P002 | ITEM DETAILS |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
 | Nardi Classic Punching Leather (Steering Wheels) -N005 | ITEM DETAILS |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
 | Nardi Classic Smooth Leather (Steering Wheels) -N111 | ITEM DETAILS |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
 | Nardi Classic Suede Leather (Steering Wheels) -N115 | ITEM DETAILS |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
 | Nardi Personal Trophy (Steering Wheels) -P051 | ITEM DETAILS |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
 | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | ITEM DETAILS |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
 | SARD Steering - D-shape (Steering Wheels) -80219 | ITEM DETAILS |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
 | SARD Steering - Semi Deep (Steering Wheels) -80227 | ITEM DETAILS |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
 | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | ITEM DETAILS |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
 | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | ITEM DETAILS |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
 | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
 | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | ITEM DETAILS |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
 | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | ITEM DETAILS |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
 | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
 | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | ITEM DETAILS |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
Intake Parts
 | Apex APEXi Power Intake Kit More Info (Air Filters) -507-T017 | ITEM DETAILS |
| Air filter with minimal air-flow restriction. Dual funnel filter system minimizes intake turbulence. Vehicle specific kits include adapters and other fitting parts. The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spotsb within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is touble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. | $ 258.57 |
 | Blitz Advance Power Cleaner More Info (Air Filters) -42055 | ITEM DETAILS |
| Superceding the BLITZ Sonic Power Cleaner, the new Blitz Advance Power Cleaner uses a stainless steel mesh filter that produces high inhalation efficiency and racy intake sound. Cooling shield with large diameter funnel shields radiant heat from the engine bay, preventing heat soak of the filter. By suppressing the rise in the temperature of the filter, high filling efficiency is maintainted providing a stable suction temperature. With the variable shield structure, it is possible to secure a large amount of air around the filter, and it is effective for instantaneous increase of intake air. Large diameter funnels efficiently supply a large amount of air, achieving high suction efficiency. Cooling shield made of aluminum, with blue anodized lock plate. | DISCONTINUED |
 | Blitz Carbon Power Air Cleaner More Info (Air Filters) -35055 | ITEM DETAILS |
| Uses the highly acclaimed stainless mesh filter from SUS Power/Advance Power air cleaners. Conical body with "M" folds maximise the intake area, while balancing dust collecting ability with intake efficiency. The carbon shield deflects surrounding heat, preventing intake air temperature from rising. Being made from carbon, the shield itself emits very little heat. With proper care and maintenance, the stainless mesh filter can be used indefinitely. | DISCONTINUED |
 | Blitz Sonic Power Air Cleaner (Air Filters) -58055 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz SUS Power Air Cleaner More Info (Air Filters) -26055 | ITEM DETAILS |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | DISCONTINUED |
 | Blitz SUS Power Core Type LM More Info (Air Filters) -56055 | ITEM DETAILS |
| Filter colour: blue. | DISCONTINUED |
 | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59055 | ITEM DETAILS |
| Filter colour: red. | DISCONTINUED |
 | HKS Racing Suction (Air Filters) -70020-AT102 | ITEM DETAILS |
| The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits. To maximise intake capacity, HKS has carefully revised their HKS Racing Suction Reloaded for each car model, delivering the ultimate intake system to further increase the power. Filters use the new hyper stealth frame, where the opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. | $ 274.01 |
 | HKS Racing Suction Reloaded (Air Filters) -70020-AT005 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy AIRINX B-Type (Air Filters) -12511007 (TY-M007B) | ITEM DETAILS |
| Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | DISCONTINUED |
 | Apex APEXi Power Intake Filter More Info (Air Filters (Panel/OEM) Type) -503-T107 | ITEM DETAILS |
| Factory replacement filter featuring: Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt. Dry-type filter element requires no oiling, and will not foul air flow sensors. Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed. Easy intallation, cleaning, and maintenance. | $ 24.88 |
 | HKS Super Air Filter More Info (Air Filters (Panel/OEM) Type) -70017-AT111 | ITEM DETAILS |
| New standard (stock) replacement type air filter utilizing newly developed dry non-woven fabric filter. High dust collection capacity and low resistance are implemented together at a high level. | $ 23.97 |
 | TOM's Super Ram II (Air Filters (Panel/OEM) Type) -17801-TSR20 | ITEM DETAILS |
| Designed to trap airborne dust and debris with minimal air intake resistance. The filter portion of the cleaner features a new triple layered foam material made up of cell structures. This enables trapping more unwanted debris before it reaches the engine than ever before, with the smallest air intake resistance. TOM's scrutinized over even the finest dust particles and the materials to make up the filter so maximum power figures can be achieved. They then succeeded in removing the pressure loss commonly seen on polyurethane foam to make up the most efficient unit. | $ 54.49 |
 | TRD Sports Air Filter (Air Filters (Panel/OEM) Type) -17801-JS610 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy AIRINX GT (Air Filters (Panel/OEM) Type) -12512512 (TY-12GT) | ITEM DETAILS |
| High performance standard replacement (drop in) air cleaner/filter. Special high performance dry type fiber filter drastically improves intake efficiency. High rigidity and durability are achieved by using a steel net laminate structure. Rubber frame provides excellent sealing performance, keeping dust out. High performance and high quality, at a reasonable price. Direct swap for the genuine (stock) air filter, and can be easily replaced. | $ 34.80 |
 | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Super Sound Blow Off Valve BR (Blow Off Valves and Kits) -70644 | ITEM DETAILS |
| Vehicle specific kit. Super Sound Blow Off Valve BR (Blow Response). High quality aluminum die-cast body. High precision CNC machining optimizes the clearances, achieving smooth and responsive piston movement. The piston itself has a coating to improve corrosion resistance, as well as providing excellent lubrication performance even in tight clearances. Special black coating and anodized red highlights are resistant to corrosion and ideal for dressing up the engine room. Revision of the venturi design of the funnel has increased the flow rate by 17%, while creating a sharper, more powerful opening sound than the previous model. | $ 177.19 |
 | Blitz Super Sound Blow Off Valve VD Kit More Info (Blow Off Valves and Kits) -70144 | ITEM DETAILS |
| Vehicle specific kit. Venturi Drive valve. Employs the dual drive mechanism from the previous Super Sound Blow Off Valve DD. Funnel is venturi shaped to create sharp, dynamic sound. High quality die cast aluminium. Dissipates heat effectively through the ribs on the main body and funnel. 36mm big valve (with rubber) ensures sealing even in high boost applications. Piston is coated with special lubricating agent to prevent dirt/dust from damaging the piston. | DISCONTINUED |
 | HKS Suction Return Kit (Blow Off Valves and Kits) -71002-AT002 | ITEM DETAILS |
| Optional kit to convert Super SQV Kits (Sold separately) to recirculating type. Allows the exhaust air to be returned to the suction, just like the standard air bypass valve. | $ 49.64 |
 | HKS Super SQV II Kit (Blow Off Valves and Kits) -71004-AT012 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Super SQV III Kit (Blow Off Valves and Kits) -71007-AT012 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Super SQV IV + Suction Return Set More Info (Blow Off Valves and Kits) -71008-AT012V | ITEM DETAILS |
| HKS Super SQV (Sequential Blow Off Valve) and Suction Return (Recirculation) Set. HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support modern turbocharged vehicles. | $ 203.14 |
 | HKS Super SQV IV Kit More Info (Blow Off Valves and Kits) -71008-AT012 | ITEM DETAILS |
| HKS Super SQV (Sequential Blow Off Valve) uses a unique sequential valve structure and a differential pressure control system, which allows for a broad operating range from low boost to high boost. Its Pull-Type relief design ensures stable operation regardless of the amount of boost pressure. The Super SQV will support modern turbocharged vehicles. | $ 165.35 |
 | HKS Super SQV Kit (Blow Off Valves and Kits) -1421-ST012 | ITEM DETAILS |
| DISCONTINUED |
 | SARD R2D2 Blow Off Valve Kit (Blow Off Valves and Kits) -66112 | ITEM DETAILS |
| Racing Blow Off Twin Drive Type-2 (Angle Type). | DISCONTINUED |
 | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | ITEM DETAILS |
| Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | DISCONTINUED |
 | TRUST GReddy Blow Off Valve Type FV2 (Blow Off Valves and Kits) -11501672 | ITEM DETAILS |
| Universal. Blow off valve unit only. GReddy Blow Off Valve FV2 inherits the floating valve structure that was popular in the previous model, while being improved with a more sophisticated design providing better maintainability and reliability. A fidget spinner is used to adjust the spring preload without tools and the hose union direction of the top cover can be adjusted 360° without tools. Can directly replace GReddy Blow Off Valve Type RS, RZ, and FV as the mounting flange and opening have the same dimensions. | $ 164.88 |
 | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | ITEM DETAILS |
| Universal. Blow off valve unit only. | $ 152.37 |
 | ARC Super Induction Box (Induction Boxes and Ducts) -IDBJZS16103 | ITEM DETAILS |
| Includes filter(s). | DISCONTINUED |
 | HKS Piping Kit More Info (Piping) -1302-ST012 | ITEM DETAILS |
| For better durability and consistent boost pressure even under high boost conditions. Satndard plastic or rubber intercooler pipes can expand or crack under high boost levels. In addition to this, standard pipes have many bends which in some places are very tight radius which causes a lot of flow resistance and pressure drops. HKS Piping Kits are made of aluminum for increased durability and safety. The pipes have been redesigned to decrease the number of bends and to increase bend radius to minimize pressure loss and flow resistance. | DISCONTINUED |
 | ARC Super Induction Box Replacement Filter (Replacement Filters) -19001-20092 + 19001-20093 | ITEM DETAILS |
| Replacement filter for ARC Super Induction Box. | $ 106.77 |
Exterior Parts
 | Apex APEXi Super Catalyzer (Catalytic Converters / Straight Pipes) -149-T008 | ITEM DETAILS |
| $ 1193.66 |
 | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | ITEM DETAILS |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
 | SARD Sports Catalyzer (Catalytic Converters / Straight Pipes) -89024 | ITEM DETAILS |
| Sports catalytic converter for high power and high response. Vehicle specific models feature either a 200/180cpsi large metal honeycomb structure cell (withstands 1200°C, made in Japan), heat plate (shield) precision welded into a unit designed to replace the standard unit. | $ 642.50 |
 | Blitz NUR-SPEC R (Exhaust Systems (Cat Back)) -MT3050 | ITEM DETAILS |
| Straight type competition use model ideal for circuit use. Exhaust system with removable silencer to adjust power output and volume. Maximum performnace in closed circuits when silencer is removed, decreased volume with silencer installed for street use. Fully constructed using SUS 304 stainless steel for looks and maximum durability. | DISCONTINUED |
 | KAKIMOTO Racing HYPER FULLMEGA N1+REV (Exhaust Systems (Cat Back)) -T31304 | ITEM DETAILS |
| Race muffler, redesigned to be JASMA compliant. | $ 806.27 |
 | KAKIMOTO Racing Inner Silencer (Exhaust Systems (Cat Back)) -NIS001 | ITEM DETAILS |
| $ 34.01 |
 | KAKIMOTO Racing Kakimoto R (Exhaust Systems (Cat Back)) -TS304W | ITEM DETAILS |
| High quality sound with heavy bass. Suitable for high torque / high power applications. A balanced sound and performance, all-round type muffler. JASMA compliant. | $ 1058.23 |
 | Apex APEXi Exhaust Control Valve (Other) -155-A016 | ITEM DETAILS |
| $ 242.51 |
Cooling Parts
 | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A002 | ITEM DETAILS |
| The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
 | Apex APEXi GT-Spec Radiator Cap (Breather Tanks) -591-A001 | ITEM DETAILS |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
 | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | ITEM DETAILS |
| DISCONTINUED |
 | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | ITEM DETAILS |
| DISCONTINUED |
 | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | ITEM DETAILS |
| DISCONTINUED |
 | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | ITEM DETAILS |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
 | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | ITEM DETAILS |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
 | SARD Breather Tank Kit More Info (Breather Tanks) -29214 | ITEM DETAILS |
| All aluminium breather tank. Optimized structure removes air bubbles from engine coolant even more than existing breather tanks. The nipple part is removable screw type, and by combining with optional AN fittings (Sold separately), will correspond to various layouts and car models. Includes: Breather Tank (65mm diameter x 148mm), 8mm silione hose (2m), radiator cap, radiator seal cap and bracket. Please confirm radiator cap type on the vehicle to which the breather tank is to be installed. | $ 171.33 |
 | SARD Breather Tank Kit (Old) (Breather Tanks) -29209 / 29210 | ITEM DETAILS |
| Includes: Breather Tank (67mm diameter x 180mm), 8mm silione hose (2m), radiator cap, radiator seal cap and bracket. | DISCONTINUED |
 | SARD Lower Hose Adapter (Breather Tanks) -19434 | ITEM DETAILS |
| Includes: Adapter, 9mm-M14 nipple, 2 x hose bands and washer. | $ 25.67 |
 | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | ITEM DETAILS |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
 | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | ITEM DETAILS |
| $ 13.04 |
 | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | ITEM DETAILS |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
 | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | ITEM DETAILS |
| Universal gear oil cooler kit. | $ 792.41 |
 | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | ITEM DETAILS |
| Universal differential oil cooler kit. | $ 776.35 |
 | Blitz Intercooler SE Kit (Intercoolers) -23123 | ITEM DETAILS |
| Standard Edition. Fully polished aluminium piping (Excluding some models and parts). Heat resistant and durable blue 3 ply silicone joint hoses. Aluminium pipe layout designed with as few bends as possible, reducing weight and pressure loss. Core features offset inner tubes, and louver type outer fins. | DISCONTINUED |
 | HKS S TYPE Intercooler Kit (Intercoolers) -1301-RT071 | ITEM DETAILS |
| S TYPE is designed for street use; ideal for stock vehicles, lightly tuned vehicles, and for vehicles with stock replacement type turbines. The engine response under street driving and performance at a mid to high speed range are well-balanced. Core features: Inner fins 1. Short type - We have adopted short type that the pitch is optimized for fin shape, for small and light to improve the cooling efficiency. 2. Triangular straight type - We adopted triangular straight type for less pressure loss of air flow. Outer Fins (triangular louver type) - Cooling efficiency improved with louver because of the shorter length and angle of the fin. - Wide surface of louver make it more efficient in cooling. Aluminium polished piping type kits available for some models. | DISCONTINUED |
 | HPI EVOLVE Hi-SPEC Intercooler Kit (Intercoolers) -HPICE-7JZS161 | ITEM DETAILS |
| Low resistance, lightweight core suitable for applications with standard replacement (bolt on) turbos. ~approx 500PS. Kits include (new type) black silicone hose, spring clamp hose bands, aluminium piping (where applicable) and all other fitting parts. | DISCONTINUED |
| HPI EVOLVE Intercooler Kit spec-R (Intercoolers) -HP3ICE-T0501 | ITEM DETAILS |
| Low resistance, lightweight core suitable for applications with standard replacement (bolt on) turbos. ~approx 500PS. Kits include silicone hose(s), hose bands, aluminium piping (where applicable) and all other fitting parts. | $ 744.23 |
 | HPI EVOLVE Intercooler Kit spec-S (Intercoolers) -HPIC-T0501 | ITEM DETAILS |
| Street~Hard Sports use. Suitable for applications with standard turbo with increased boost. ~approx 300PS. Kits include silicone hose(s), hose bands, aluminium piping (where applicable), hose bands and all other fitting parts. | $ 503.29 |
| HPI Intercooler Kit Type-OF (Intercoolers) -HPIC-T0501 | ITEM DETAILS |
| Street~Hard Sports use. Suitable for applications with standard turbo with increased boost. ~approx 300PS. Kits include silicone hose(s), hose bands, aluminium piping (where applicable), hose bands and all other fitting parts. | DISCONTINUED |
| HPI Intercooler Kit Type-WF (Intercoolers) -HPICE-T0501 | ITEM DETAILS |
| Low resistance, lightweight core suitable for applications with standard replacement (bolt on) turbos. ~approx 500PS. Kits include silicone hose(s), hose bands, aluminium piping (where applicable) and all other fitting parts. | DISCONTINUED |
| HPI STD-SPEC Intercooler Kit (Intercoolers) -HPIC-7JZS161 | ITEM DETAILS |
| Street~Hard Sports use. Suitable for applications with standard turbo with increased boost. ~approx 300PS. Kits include silicone hose (blue), aluminium piping (where applicable), hose bands and all other fitting parts. | DISCONTINUED |
 | TRUST GReddy Intercooler Kit (Intercoolers) -12010205 | ITEM DETAILS |
| Recommended for sports turbine~full tune applications. Lightweight intercooler core (tube type, offset inner fin) design focused on cooling efficiency, maximizing filling efficiency (reduced pressure loss), in high power/high boost. - SPEC-R HG: Mirror finish side tanks, buff finish aluminium piping. - SPEC-R: barrel finish tanks and aluminium piping. Cores are CCP treated for increased corrosion resistance. | DISCONTINUED |
 | TRUST GReddy Intercooler Kit SPEC-LS (Intercoolers) -12010464 | ITEM DETAILS |
| Recommended for increased boost, and sports turbine applications. Lighweight core (inner fin), excellent cooling performance, and high response, all at low cost. Core features straight hole type inner fins which weigh less, and have less pressure loss than offset type inner fins in other manufacturers intercooler kits. Barrel finished side tanks and aluminium piping. | $ 356.21 |
 | TRUST GReddy Intercooler Kit SPEC-M (Intercoolers) -12010451 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Intercooler Kit SPEC-R HG (Intercoolers) -12010427 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Intercooler Kit SPEC-V (Intercoolers) -12010426 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | ITEM DETAILS |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
 | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | ITEM DETAILS |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
 | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | ITEM DETAILS |
| 1 piece. | DISCONTINUED |
| ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | ITEM DETAILS |
| 1 piece. | DISCONTINUED |
 | TRUST Gear Oil Pump (Other) -12004820 | ITEM DETAILS |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
 | TRUST GReddy Oil Element Relocation Kit (Other) -12014905 | ITEM DETAILS |
| Oil filter relocation kit. | $ 151.49 |
 | TRUST GReddy Washer Tank (Other) -13506101 | ITEM DETAILS |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
 | ARC Radiator Cap (Radiator Caps) -AMC00303 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Radiator Cap (Radiator Caps) -13901003 | ITEM DETAILS |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $ 19.53 |
 | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901001 | ITEM DETAILS |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
 | APP Radiator Hose System (Radiator Pipes and Hoses) -TZ025B-UR | ITEM DETAILS |
| Stainless mesh braided radiator hose. Billet aluminium mechanical clamp fittings. Reduces chances of hose breakage and coolant leaks, especially under harsh operating conditions (high engine rpm etc). | $ 85.04 |
 | Blitz Cooling Performer (Radiator Pipes and Hoses) -75277 | ITEM DETAILS |
| Withstands up to 200°C and 400Kpa (58PSI). Includes water sensor attachment (1/8PT and M10-1.0) and plug cap (for when no sensor in use). | DISCONTINUED |
 | Night Pager Alumi Upper Water Bypass Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZS16104 | ITEM DETAILS |
| Aluminium upper radiator hose replaces the standard radiator hose that would expand and deform due to heat, causing it to sag and create inteference problems, as well as reduce cooling efficiency. This bypass type (stainless mesh hose) setup routes coolant from the heater hose to the radiator upper hose, so as to suppress the rise in coolant temperature. In manufacturer testing, coolant temperature was reduced by 5~10°C due to lower burden on the radiator. Suitable for use with PT1/8 temperature sensors. | $ 215.17 |
 | Night Pager Silicone Hose Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZS16102 | ITEM DETAILS |
| For use with Night Pager Stain Upper Hose. | DISCONTINUED |
 | Night Pager Stain Upper Hose (Radiator Pipes and Hoses) -(GL)CLRPNTPJZS16101 | ITEM DETAILS |
| Stainless upper hose. Suitable for use with M16 and PT1/8 temperature sensors. | DISCONTINUED |
 | Night Pager Stain Upper Water Bypass Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZS16103 | ITEM DETAILS |
| Stainless steel upper radiator hose replaces the standard radiator hose that would expand and deform due to heat, causing it to sag and create inteference problems, as well as reduce cooling efficiency. This bypass type (stainless mesh hose) setup routes coolant from the heater hose to the radiator upper hose, so as to suppress the rise in coolant temperature. In manufacturer testing, coolant temperature was reduced by 5~10°C due to lower burden on the radiator. Suitable for use with PT1/8 temperature sensors. | DISCONTINUED |
 | Night Pager Water Bypass Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZS16105 | ITEM DETAILS |
| Stabilises coolant temperature by bypassing the coolant from the heater hose. This bypass function stabilises the rear cylinder temperature where heat easily accummulates, preventing heat soak and over heating. Billet aluminium A5056 adapters. Stainless mesh bypass hose. For installation, cutting of the standard upper hose and heater hose is required. | $ 146.83 |
 | SARD Radiator Hose (Radiator Pipes and Hoses) -79517L | ITEM DETAILS |
| Silicone. 3 ply. | $ 68.03 |
 | TRUST GReddy Aluminium Radiator Pipe (Radiator Pipes and Hoses) -13911231 | ITEM DETAILS |
| Highly durable aluminium radiator pipe that is designed to with water temperature sensor adapter. Pipe diameter and shape is designed to ensure sufficient coolant flow and flow speed. Standard hose swelling caused by heat is avoided enabling more eficient coolant flow. | DISCONTINUED |
 | HKS Kansai Aluminium Radiator (Radiators) -KWT402 | ITEM DETAILS |
| All aluminum radiator. Includes Kansai Service radiator cap (127kPa). | DISCONTINUED |
 | KOYO High Pressure Radiator Cap (Radiators) -SK-C13 | ITEM DETAILS |
| Rust resistant stainless steel and chrome plated finish. Special synthetic rubber that is resistant to heat and corrosion. 1.3 kg/cm2 (127kPa). | $ 20.13 |
 | KOYO Type-R Radiator (Radiators) -KA010647 | ITEM DETAILS |
| Copper 3 row core (41 or 49mm wide depending on application). Brass tanks. Named Type-R for "Racing", this radiator type adopts KOYO's 3 row core with excellent thermal conductivity. Suitable for highly tuned engines. | $ 540.87 |
 | SARD Racing Radiator (Radiators) -29013 | ITEM DETAILS |
| Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. | DISCONTINUED |
 | SARD Racing Radiator and Cooling Thermo Set (Radiators) -29013 + 19403 | ITEM DETAILS |
| Limited time special campaign radiator and thermostat set. SARD Racing Radiator: Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. SARD Cooling Thermo: Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | DISCONTINUED |
 | SARD Reserve Tank (Reserve Tanks) -29700 | ITEM DETAILS |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
 | Billion Super Thermo (Thermostats) -BST-S07 | ITEM DETAILS |
| Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | $ 47.09 |
 | SARD Cooling Thermo (Thermostats) -19403 | ITEM DETAILS |
| Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | $ 42.36 |
 | TRD Sports Thermostat (Thermostats) -16340-SP020 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz ATF Cooler Kit (Transmission Oil Coolers) -10302 | ITEM DETAILS |
| Automatic Transmission Fluid Cooler Kit. | DISCONTINUED |
 | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | ITEM DETAILS |
| Universal transmission oil cooler kit. | $ 829.89 |
 | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | ITEM DETAILS |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
 | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
Engine Parts
 | Advance Black Alternator (Alternators) -BA-JZ130 | ITEM DETAILS |
| High power, low resistance, better cooling. DENSO SC stator coil. Black body, red or blue aluminium pulley. | $ 345.06 |
 | TOMEI Competition Bearing (Conrod) More Info (Bearings) -127200 | ITEM DETAILS |
| Upper and lower set. | $ 22.14 |
 | TOMEI Competition Bearing (Main) More Info (Bearings) -126200 | ITEM DETAILS |
| Upper and lower set. | $ 40.28 |
 | Apex APEXi STB Heavy Duty Timing Belt (Belts and Chains) -818-T006 | ITEM DETAILS |
| Sports tuning belt. | $ 80.00 |
 | HKS Fine Tune Timing Belt (Belts and Chains) -24999-AT004 | ITEM DETAILS |
| Designed for use with HKS Slide Cam-Pullies (Sold separately), these belts are optimized for each engine type. Ideal for high power/high rpm applications. Designed to allow stable belt extension even when heat expansion occurs in the engine. Correctly shaped belt teeth reduces chances of slipping in high torque engines at lower belt tension, therefore not compromising belt strength. Teeth rubber are made from H-NBR grade rubber for additional strength. * Materials and/or molding method may vary sightly depending on application. | $ 89.45 |
 | HKS Fine Tune V Belt (Belts and Chains) -24996-AK020 | ITEM DETAILS |
| Using the latest in belt technology, these belts maintain engine condition, while improving engine room appearance. Increased durability at high temperatures which can be found in the engine bay of tuned vehicles. Increased performance in cold weather conditions. Lightweight and good friction tolerance properties, mean that excess tension is not required, while anti-sound properties reduces belt squeal. EPDM (Ethylene Propylene Diene Monomer) Rubber is used in the manufacture of these belts because of: - Better durability and performance in hotter or colder conditions with improved friction tolerance. - Much lighter than previous version of belt. - Short fiber mixture in rib rubber improves the performance over previous version. Compared to standard belts: High temperature durability: 4 times greater. Low temperature durability: 10 times greater. Abrasion resistance: 30% improved. Weight: 17% lighter. Noise: Less. | $ 61.10 |
 | Power Enterprise Super Kevlar II Timing Belt (Belts and Chains) -BT311 | ITEM DETAILS |
| Stretch resistant - Maintains long-term performance. Significant improvements against belt tooth failure and cut resistance. Drives camshafts accurately. | $ 98.08 |
 | TOMEI Nissan Adjustable Belt Tensioner (Alternator Relocation) (Belts and Chains) -AY460-NS013 + 13074-V5000 + 09340-0014P + 08911-2401A | ITEM DETAILS |
| Nissan adjustable belt tensioner and fitting parts. Requires TOMEI High Strength Stud Bolt and TOMEI Tensioner Height Adjustment (Both sold separately). | $ 37.77 |
 | TOMEI Alternator Relocation Bracket (Belts and Chains) -195106 | ITEM DETAILS |
| Brackets for relocation of the alternator, prevents fan belt from dropping out. Protects Cylinder Block Under extreme conditions such as competition use, the stock cylinder block easily gets cracked due to a stud bolt underneath the alternator by its own vibration. Relocating the alternator with this kit also prevents this problem. Keeps Alterator away from heat When running a big turbo on 1JZ/2JZ, the alternator is directly exposed to the heat coming from the exhaust. It's ideal to relocate the alternator to the intake side to prevent heat damage. For applications where air con compressor has been removed. Significantly increased durability to support the performance and withstand extreme conditions in highly tuned engine. Redesigned with higher class material and thicker structure. Designed to accommodate a tensioner pulley as necessary for the electric water pump setup popular competition vehicles (Not included). | $ 146.45 |
 | TOMEI Alternator Relocation Bracket (Old Version) (Belts and Chains) -195101 | ITEM DETAILS |
| Brackets for relocation of the alternator, prevents fan belt from dropping out. Protects Cylinder Block Under extreme conditions such as competition use, the stock cylinder block easily gets cracked due to a stud bolt underneath the alternator by its own vibration. Relocating the alternator with this kit also prevents this problem. Keeps Alterator away from heat When running a big turbo on 1JZ/2JZ, the alternator is directly exposed to the heat coming from the exhaust. It's ideal to relocate the alternator to the intake side to prevent heat damage. For applications where air con compressor has been removed. | DISCONTINUED |
 | TOMEI Heavy Duty Timing Belt (Belts and Chains) -154002 | ITEM DETAILS |
| Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more. | $ 80.63 |
| TOMEI High Strength Stud Bolt (Belts and Chains) -191330 | ITEM DETAILS |
| Required for installation of adjustable belt tensioner when using TOMEI Alternator Relocation Bracket. | $ 20.03 |
 | TOMEI Tensioner Height Adjustment (Belts and Chains) -34109010 | ITEM DETAILS |
| Modification service of Nissan Adjustable Belt Tensioner (Sold separately) for use with Alternator Relocation Bracket. | $ 40.63 |
 | TRUST GReddy Heavy Duty Timing Belt (Belts and Chains) -13514502 | ITEM DETAILS |
| Extreme Timing Belt. Engineered to increase heat-resistance, flexibility and durability, TRUST GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consistent and last longer. | $ 86.17 |
 | JUN Strengthened Valve Guide (Camshaft and Valvetrain Parts) -1008M-T001 | ITEM DETAILS |
| Heavy duty racing valve guide set. | $ 263.93 |
 | JUN Titanium Valve Retainers (Type 1) (Camshaft and Valvetrain Parts) -1005M-T003 | ITEM DETAILS |
| $ 396.21 |
 | JUN Titanium Valve Retainers (Type 2) (Camshaft and Valvetrain Parts) -1005M-T203 | ITEM DETAILS |
| Treated surface for better wear resistance. | $ 514.00 |
 | NAPREC Reinforced Valve Springs and Retainer Set (Camshaft and Valvetrain Parts) -(GL)ENCVNAP2JZGTE01 | ITEM DETAILS |
| $ 381.09 |
 | Real Speed Engineering Inner Shim Kit (Camshaft and Valvetrain Parts) -RA312A-TY03A | ITEM DETAILS |
$ 646.28 |
 | TOMEI Inner Shim Kit (Camshaft and Valvetrain Parts) -163501 | ITEM DETAILS |
| Outer to inner shim type lifter conversion kit. Removes weight from the moving parts of the valve train, reducing inertia and friction, allowing the engine to rev higher. For high lift camshafts (10.5~12.0mm). | $ 894.14 |
 | TOMEI Solid Lifter (Camshaft and Valvetrain Parts) -163600 | ITEM DETAILS |
| Valve lifters. | $ 340.15 |
 | TOMEI Valve Springs (Camshaft and Valvetrain Parts) -163062 | ITEM DETAILS |
| $ 214.48 |
 | HKS Camshaft (Camshafts and Camshaft Kits) -22002-AT004 | ITEM DETAILS |
$ 368.49 |
 | Real Speed Engineering SPEC-S Camshaft (Camshafts and Camshaft Kits) -RA301C-TY03E | ITEM DETAILS |
| $ 277.79 |
| Real Speed Engineering SPEC-R Camshaft (Camshafts and Camshaft Kits) -RA301C-TY03F | ITEM DETAILS |
| $ 277.79 |
 | Real Speed Engineering SPEC-S Camshaft Set (Camshafts and Camshaft Kits) -RA301A-TY03E | ITEM DETAILS |
| $ 555.57 |
| Real Speed Engineering SPEC-R Camshaft Set (Camshafts and Camshaft Kits) -RA301A-TY03F | ITEM DETAILS |
| $ 555.57 |
 | TOMEI PONCAM Camshaft (Camshafts and Camshaft Kits) -1404252089 | ITEM DETAILS |
| $ 266.45 |
| TOMEI PROCAM Camshaft (Camshafts and Camshaft Kits) -1404264095 | ITEM DETAILS |
| $ 266.45 |
 | TOMEI PONCAM Camshaft Kit (Camshafts and Camshaft Kits) -143075 | ITEM DETAILS |
| PONCAM Intake and exhaust camshafts. | $ 532.90 |
 | JUN Super Connecting Rods (Connecting Rods and Parts) -1002M-T005 | ITEM DETAILS |
| SCM440 I Beam connecting rods. | $ 1044.06 |
 | TOMEI Forged H-Beam Conrod Kit (Connecting Rods and Parts) -1263003221 | ITEM DETAILS |
| $ 816.35 |
 | TOMEI 2JZ36 Billet Full Counter Weight Crankshaft (Crankshafts) -121051 | ITEM DETAILS |
| $ 3967.43 |
 | TOMEI Complete Block (Engine, Head and Short Block Assemblies) -216012 | ITEM DETAILS |
| $ 7495.81 |
| Flatwell Exhaust Manifold (Exhaust Manifolds (Turbo)) -(GL)ENEXFLA-2JZ-T3Flange | ITEM DETAILS |
| $ 1237.44 |
 | Rasty VR High Power Exhaust Manifold (Exhaust Manifolds (Turbo)) -(GL)ENEMRASJZS16101 | ITEM DETAILS |
| $ 1330.01 |
 | TRUST GReddy Sus. Turbo Ex. Manifold (Exhaust Manifolds (Turbo)) -10511050 | ITEM DETAILS |
| Stainless steel turbo exhaust manifold. Design layout with runners as close equal length within the space constraints of the of the engine bay, optimising turbo efficiency. Main pipe diameter and the waist gate line diameter are designed to efficiently spool the turbo. | $ 1260.43 |
 | SARD Jet Pump Killer (Fuel Other) -58301 | ITEM DETAILS |
| Allows for steady fuel flow caused by insufficient capacity of standard jet pump after upgrading to larger capacity fuel pumps. | $ 108.97 |
 | Blitz Fuel Pump (Fuel Pumps) -31255 | ITEM DETAILS |
| DISCONTINUED |
 | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | ITEM DETAILS |
| DISCONTINUED |
 | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | ITEM DETAILS |
| DISCONTINUED |
| SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | ITEM DETAILS |
| DISCONTINUED |
| SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | ITEM DETAILS |
| DISCONTINUED |
| SARD Fuel Filter (Fuel Pumps) -58254 | ITEM DETAILS |
| $ 4.03 |
 | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | ITEM DETAILS |
| $ 194.32 |
 | SARD Fuel Pump Kit (Fuel Pumps) -58326 | ITEM DETAILS |
| Car specific fuel pump kit. | $ 167.55 |
 | SARD Pump Harness Kit (Fuel Pumps) -58253 | ITEM DETAILS |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
 | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | ITEM DETAILS |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
 | SARD Fuel Delivery Pipe (Fuel Rails) -63554 | ITEM DETAILS |
| Fuel rail. Gold. | $ 167.55 |
 | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | ITEM DETAILS |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
 | SARD Fuel Regulator Adapter and Adapter Nipple (Fuel Regulators) -SRA02 69015 + SRB01 69020 | ITEM DETAILS |
| For attachment of SARD fuel regulators to standard fuel delivery pipe. | $ 31.56 |
 | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | ITEM DETAILS |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
 | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | ITEM DETAILS |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
 | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | ITEM DETAILS |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
 | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | ITEM DETAILS |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
 | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | ITEM DETAILS |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
 | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | ITEM DETAILS |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
 | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | ITEM DETAILS |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
 | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | ITEM DETAILS |
| $ 283.46 |
 | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | ITEM DETAILS |
| Mount bracket. | $ 32.88 |
 | Apex APEXi Head Gasket (Gaskets) -814-T101 | ITEM DETAILS |
| Provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory headgasket. APEXi recommends replacing the factory headgasket with a metal one before gasket failure causes more damage to the engine. The gaskets are all designed engine specific and provide a complete and secure seal. | $ 178.26 |
 | Auto Staff Insulation Gasket (Gaskets) -AS-INGK-T1 | ITEM DETAILS |
| Heat insulating gasket that uses a special material to be used between the intake manifold and the engine block. Intake manifold temperature is suppressed, increasing intake efficiency as heat generated from the engine block is not transmitted to the intake manifold as easily. | $ 54.80 |
 | D-MAX Exhaust Manfiold Metal Gasket (Gaskets) -DMGS1021 | ITEM DETAILS |
| Handles temperature and pressure at a much higher level than the standard gaskets. Less prone to exhaust leaks than standard gaskets. | $ 37.16 |
 | D-MAX Intake Manifold Gasket (Gaskets) -DMGS1022 | ITEM DETAILS |
| $ 22.05 |
 | D-MAX Surge Tank Gasket (Gaskets) -DMGS1023 | ITEM DETAILS |
| Surge Tank (Collector) gasket. Special coating has been applied to the surface, so has stronger shielding properties than the standard gasket. | $ 19.53 |
 | NAPREC Gasket Kit (Gaskets) -(GL)ENGK-NAP-2JZGTE-01 | ITEM DETAILS |
| Engine gasket kit. | $ 294.48 |
 | Power Enterprise Heavy Metal Gasket (Gaskets) -(GL)ENGKPRE2JZGTE01 | ITEM DETAILS |
| The definitive version of metal gaskets, with a track record of use in WRC and touring car applications. | $ 205.35 |
 | TOMEI Head Gasket (Gaskets) -1371875121 | ITEM DETAILS |
| $ 167.55 |
 | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900537 | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | $ 112.94 |
 | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | ITEM DETAILS |
| Voltage stabiliser and earthing system. | DISCONTINUED |
 | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | ITEM DETAILS |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
 | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | ITEM DETAILS |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
 | HKS Carbon Timing Belt Cover (Ignition System Parts) -45999-AK028 | ITEM DETAILS |
| Option part for use with HKS Super Fire Racing Coil Pro. | $ 272.12 |
 | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | ITEM DETAILS |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
 | HKS Super Fire Racing Coil Pro (Ignition System Parts) -43005-AT001 | ITEM DETAILS |
| Compared to standard coils, secondary voltage is increased providing a strong and reliable spark and preventing misfire at high RPM. | $ 1009.10 |
| HKS Twin Power Harness (Ignition System Parts) -4399-ST001 | ITEM DETAILS |
| Car specific harness. | DISCONTINUED |
 | HKS Twin Power TYPE-DLI (Ignition System Parts) -43001-AK001 | ITEM DETAILS |
| Twin Power high performance ignition system. High powered tuned engines can cause ingnition system issues. The Twin Power can solve all these problems and maximiz potential engine power. Full transistor type: Long duration of discharge to obtain stable combustion at a low RPM. CDI System: Fast initial rise of current discharge so it has strong ignition energy which is good for high RPM. | DISCONTINUED |
 | Ignition Projects IP Power Coil (Ignition System Parts) -IP-R137303 | ITEM DETAILS |
| $ 205.35 |
 | Ignition Projects IP Power Igniter (Ignition System Parts) -IP-IG37301 | ITEM DETAILS |
| Power igniter that is compatible with inductive ignition. The built-in high-performance transistor increases power by more than 20% compared to the standard item. | $ 177.00 |
 | OKADA Projects Plasma Booster (Ignition System Parts) -SB203100B | ITEM DETAILS |
| High power amplifier which drastically boosts ignition coil current. With an increase in spark current, the ignition process is faster and it also creates a faster burn, thus leading to more horsepower and torque. Complete ignition decreases the incidence of "hot spots" in the combustion chamber and lowers the risk of detonation. Simple installation, only 2 wires on distributor type ignition. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Compatible with OBD-II (On-Board-Diagnostics). | $ 226.95 |
 | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT SPARK EARTH (Ignition System Parts) -SES | ITEM DETAILS |
| DISCONTINUED |
 | SARD Magic Box (Ignition System Parts) -62311 | ITEM DETAILS |
| Voltage stabiliser. | DISCONTINUED |
 | SARD Sweeper (Ignition System Parts) -62310 | ITEM DETAILS |
| Voltage stabiliser. | DISCONTINUED |
 | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | ITEM DETAILS |
| DISCONTINUED |
 | SARD 540cc Injector (Injectors) -63560 | ITEM DETAILS |
| DISCONTINUED |
| SARD 650cc Injector (Injectors) -63561 | ITEM DETAILS |
| DISCONTINUED |
| SARD 800cc Injector (Injectors) -63564 | ITEM DETAILS |
| DISCONTINUED |
| SARD 850cc Injector (Injectors) -63507 | ITEM DETAILS |
| DISCONTINUED |
 | SARD Injector Collar (Injectors) -63525 x 6 | ITEM DETAILS |
| Part required for attachment of injectors to standard fuel delivery pipe. | DISCONTINUED |
 | SARD Injector Kit (Injectors) -63812 | ITEM DETAILS |
| Kit including injectors and all parts required for bolt installation to standard fuel delivery pipe. | DISCONTINUED |
| SARD Oil Catch Tank (Oil Breather Tanks) -29239 | ITEM DETAILS |
| Oil catch (breather) tank kit. | DISCONTINUED |
 | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | ITEM DETAILS |
| Universal kit. 1000ml. | $ 92.60 |
 | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | ITEM DETAILS |
| Universal kit. | DISCONTINUED |
| TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | ITEM DETAILS |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
 | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | ITEM DETAILS |
| Universal kit. 680ml. | $ 87.24 |
 | Blitz Racing Oil Filter (Oil Filters) -18701 (B-1213) | ITEM DETAILS |
| A high-performance oil filter that Blitz has worked on, with a proven track record in filters for air cleaners. Durability above regulation level in JIS impulse durability tests. Designed exclusively for maximizing filtration performance of the filter itself. By increasing the filter strength, it corresponds to the high standard among all load conditions. | $ 20.16 |
 | HKS Oil Filter (Oil Filters) -52009-AK013 (Old: 52009-AK007) | ITEM DETAILS |
| New concept oil filter improves oil pressure drop and flow properties. The oil pressure drop and flow properties are improved by approximately 30% compared to current sports oil filters. The stress on the engine is reduced for better engine response. Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance. HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines. Filter replacement is recommended every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace filters every 3,000 km ~ 5,000km. | $ 17.89 |
 | NAPREC Oil Pan Baffle Plate (Oil Pans (Sumps) and Baffle Plates) -(GL)ENOPNAP-JZ-01 | ITEM DETAILS |
| Significantly minimise bearing problems caused by lubrication issues caused by sloshing of oil during hard cornering. | $ 116.03 |
 | TOMEI Oil Pan Baffle Plate More Info (Oil Pans (Sumps) and Baffle Plates) -194005 | ITEM DETAILS |
| Protects the engine under the strong G-force on track! During hard acceleration, deceleration and cornering, the sudden change in inertial forces will cause the oil to jump and move around too much. When this happens, the oil can move away from the oil pickup, which then in turn cuts oil supply to the engine. The TOMEI baffle plate is designed to prevent this problem from happening especially when the car is used for competition use. | $ 152.12 |
 | CUSCO Dry Sump Oil Pan (Oil Pumps) -00B-755-DSOP | ITEM DETAILS |
| Made of high-rigidity, high-strength duralumin (Billet). Oil intakes are placed in 10 locations on the left and right to suit the layout and engine inclination. Height setting ensures road clearance and allows for space flexibility (Oil pan height: 55mm). Compeitition use part. | $ 1700.73 |
 | CUSCO Dry Sump Oil Pump (Oil Pumps) -00B-755-DSP5 | ITEM DETAILS |
| Made of high-rigidity, high-strength duralumin (billet). Uses a rotary gear pump for high efficiency, low friction, and low noise. Simple structure that does not require a check valve. Compeitition use part. | $ 2437.71 |
| Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
 | Billion Racing PS Tank (Other) -BRPS-090 | ITEM DETAILS |
| Power steering fluid tank. | DISCONTINUED |
 | NAPREC Crankshaft Socket (Other) -(GL)ENOTNAP2JZ01 | ITEM DETAILS |
| Increase work efficiency during engine assembly/disassembly. | $ 82.20 |
 | HKS Forged Piston Kit (Piston Kits and Parts) -21003-AT002 | ITEM DETAILS |
| Kit includes pistons, piston rings, pins and circlips. | $ 839.03 |
 | JUN P Series Excellent Piston Kit (Piston Kits and Parts) -1001P-T044 (Old: 1001P-T042) | ITEM DETAILS |
| Lightweight CP-Pistons (USA). Good piston profile makes high speed motion in the cylinder, and high rigidity forged material will get durability. | $ 1675.53 |
 | JUN W Series Excellent Piston Kit (Piston Kits and Parts) -1001W-T041 | ITEM DETAILS |
| DISCONTINUED |
 | TODA High Power Profile Piston Kit (Piston Kits and Parts) -13010-2JZ-0T0 | ITEM DETAILS |
| Forged piston kit. | DISCONTINUED |
 | TOMEI Forged Piston Kit (Piston Kits and Parts) -1162865212 | ITEM DETAILS |
| Kit includes pistons, piston rings, pins and circlips. | $ 839.03 |
| TOMEI Forged Piston Kit 2JZ Repair Parts (Piston Kits and Parts) -1162865214 | ITEM DETAILS |
| Parts for repair/overhaul of TOMEI Forged Piston Kit. | $ 166.86 |
| TOMEI Piston Ring Set (Piston Kits and Parts) -11986561 | ITEM DETAILS |
| For use with TOMEI pistons. | $ 160.62 |
 | TRUST GReddy Forged Piston and Conrod Set (Piston Kits and Parts) -13516700 | ITEM DETAILS |
| Highly durable piston with low power loss. High sealing performance - that does not release combustion power. Low friction - that allows smooth vertical movement. High thermal efficiency - that releases heat from the piston. These elements are embodied in a different approach than before, and we have created a high durability piston with little power loss. | $ 1547.66 |
 | TRUST GReddy Forged Piston Set by OS Giken (Piston Kits and Parts) -13516600 | ITEM DETAILS |
| Highly durable piston with low power loss. High sealing performance - that does not release combustion power. Low friction - that allows smooth vertical movement. High thermal efficiency - that releases heat from the piston. These elements are embodied in a different approach than before, and we have created a high durability piston with little power loss. | $ 776.35 |
 | HKS Crank Damper Pulley Kit (Pulleys) -24999-AT001 | ITEM DETAILS |
| DISCONTINUED |
 | NAPREC Oversize Power Steering Pump Pulley (Pulleys) -(GL)ENPU-NAP-2JZ-01 | ITEM DETAILS |
| $ 148.66 |
 | TOMEI Alternator Pulley (Pulleys) -191313 | ITEM DETAILS |
| Alternator pulley designed to prevent overcharging during high-speed operation in racing and other applications. | $ 103.30 |
 | TOMEI ATI Super Damper More Info (Pulleys) -ATI918562 | ITEM DETAILS |
| Crank torsional vibrations are increased as engine is tuned and squeezed for more power. By eliminating the vibration to resonate harmonics is highly important as it may become a cause for serious problem to the engine. ATI Super Damper is engineered to absorb the vibrations to protect the engine from the harmful harmonics. | $ 385.50 |
 | TRUST GReddy Aluminium Pulley Kit (Pulleys) -13512102 | ITEM DETAILS |
| $ 187.58 |
 | Do Luck 2JZ Chromoly Main Cap and Billet Ladder Frame (Reinforced Bolts) -46000 | ITEM DETAILS |
| Replaces standard crank caps. Requires line boring and metal groove processing for installation. For use with ARP Main Stud Bolts (Sold separately). | $ 807.53 |
 | Do Luck ARP Main Stud Bolt Kit (Reinforced Bolts) -203-5405 | ITEM DETAILS |
$ 339.01 |
 | TOMEI ARP Head Stud Kit (Reinforced Bolts) -203-4205 | ITEM DETAILS |
| $ 178.67 |
 | TOMEI ARP Undercut Head Stud Kit (Reinforced Bolts) -203-4702 | ITEM DETAILS |
| $ 196.02 |
 | HKS 2JZ-GTE 3.4L Kit (Stroker Kits) -21004-AT001 | ITEM DETAILS |
$ 6462.77 |
 | JUN Custom Kit (Stroker Kits) -1029M-T002 | ITEM DETAILS |
| $ 5984.05 |
 | TOMEI 2JZ36KIT (Stroker Kits) -252004 | ITEM DETAILS |
| $ 5139.98 |
 | Premium Japan Throttle Convert Kit (Throttle Bodies and Intake Parts) -PJ-KIT-00003 | ITEM DETAILS |
| Eliminates poor throttle (accelerator) response by bypassing the intervening computer control of the standard electronic throttle. Easily, reliably, and cheaply solve this problem with this kit so that you have full control of your vehicle. Throttle opening/closing directly with accelerator wire. No Throttle Position Sensor Check lamp. Idle up control is maintained. | $ 205.35 |
 | TRUST GReddy Surge Tank Pro Kit (Throttle Bodies and Intake Parts) -13512303 | ITEM DETAILS |
| Intake manifold/plenum. Throttle flange and air outlet (not welded) can be setup according to the car. 3mm wall thickness suitable for high boost applications. Funnels increase flow rate and maximise efficiency. | $ 1124.37 |
 | TRUST GReddy Turbo Kit (Actuator Type) (Turbocharger Kits) -11510055 | ITEM DETAILS |
| Built in actuator type turbo kit for users who are not satisfied with only increasing boost with the standard turbo(s). Utilising the standard exhaust manifold, after bolt on replacement of the standard turbo(s) and adjusting air-fuel ratio and ignition timing, user can feel best combination of power and torque. Kits includes parts required for installation, without need for modification (some parts may require small adjustments) allowing for simple installation. | $ 2409.37 |
 | TRUST GReddy Turbo Kit (Wastegate Type) (Turbocharger Kits) -11510054 | ITEM DETAILS |
| Full external wategate type turbocharger kit. High grade product for customer who wants ideal engine tuning. Using a special stainless steel exhaust manifold and intake piping to suit the redesigned layout. Piping modifications are not necessary (some models may require slight adjustments). This kit is intended for full-fledged engine tuning for use in conjunction computer tuning, high-performance intercooler, and other supporting engine parts (Not included). | $ 3426.66 |
Drivetrain Parts
 | CUSCO Hybrid Differential More Info (Differentials) -HBD 167 A | ITEM DETAILS |
| Super low initial torque. 1 way. Designed for automatic transmission models. | $ 655.10 |
 | CUSCO LSD Type MZ More Info (Differentials) -LSD 167 E | ITEM DETAILS |
| LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
 | CUSCO LSD Type MZ Spec F More Info (Differentials) -LSD 167 ET | ITEM DETAILS |
| Flat Friction Disc Type (For smoother/milder actuation). LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
 | CUSCO LSD Type RS More Info (Differentials) -LSD 167 F | ITEM DETAILS |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
| CUSCO LSD Type RS Spec F More Info (Differentials) -LSD 167 FT | ITEM DETAILS |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
 | KAAZ LSD (Differentials) -DBT3020 | ITEM DETAILS |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 798.21 |
 | KAAZ LSD Super Q (Differentials) -DBT3020SQ | ITEM DETAILS |
| Quiet locking performance featuring WPC treated clutch plates. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 918.77 |
 | TOMEI TECHNICAL TRAX ADVANCE LSD (Differentials) -562027 | ITEM DETAILS |
| 2 Way LSD that locks very well when ON or OFF throttle. T-TRAX ADVANCE has several advantages over similar mechanical limited slip differentials from other manufacturers. It features optimized cam angles, spring discs, larger surface area clutch discs and a higher initial torque setting. These all translate to improved corner entry, more precise driving, better corner exit traction as well as quicker response through successive corners. T-TRAX ADVANCE offers superior performance in every way. | $ 816.35 |
Suspension Parts
 | Auto Refine arc Pipe Stablizer (Anti Roll (Sway/Stabiliser) Bars) -(GL)SHSBAURJZS16101 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -187 311 A32 | ITEM DETAILS |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $ 179.65 |
 | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | ITEM DETAILS |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
 | DIXCEL RGM type Side Inner Shoe (Brake Pads) -RGM-3154784 | ITEM DETAILS |
| Side (hand brake) inner shoes for gymkhana, dirt trial, rally, drift applications. Through thorough repeated tests with actual cars, the materials used in this inner shoes offer excellent initial braking. Excellent initial braking makes spin turns that you frequently see in gymkhana, dart trials, rallies, drift competitions easy. Non asbestos. | $ 102.42 |
 | ENDLESS CC-A (Brake Pads) -EP292CCA | ITEM DETAILS |
| Street. Ceramic Carbon Metal. 50~480°C. Average friction coefficient: 0.38~0.45. | DISCONTINUED |
 | ENDLESS CC-Rg (Brake Pads) -EP292CRG2 | ITEM DETAILS |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 121.57 |
 | ENDLESS CC33 (S55G) (Brake Pads) -EP292CC33 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.28~0.33. | $ 142.99 |
| ENDLESS CC35 type-E (N84M) (Brake Pads) -EP292CC35E | ITEM DETAILS |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.30~0.35. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 249.44 |
| ENDLESS CC38 (ME22) (Brake Pads) -EP292CC38 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.33~0.38. Based on the CC40 (ME20) compound, this variation with slightly lowered friction coefficient, allows for more control. Ideal for medium weight vehicles with high breaking loads or heavy vehicles on low speed circuits. | $ 142.99 |
| ENDLESS CC40 (ME20) (Brake Pads) -EP292CC40 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 0~650°C. Average friction coefficient: 0.22~0.28. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 142.99 |
| ENDLESS CC43 (N35S) (Brake Pads) -EP292CC43 | ITEM DETAILS |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.40~0.43. These brake pads deliver stable performance even under high temperatures and high loads, especially when used continuously with heavy vehicles, putting a large strain on the brakes. They pads are recommended for high-powered vehicles driving on circuits, where increased braking performance is desired. The material provides excellent control and stable braking force, enough to be used in the WRC. They also feature excellent release control with a moderate pedal stroke and a tactile feel. - Circuit driving for heavy vehicles weighing approximately 2 tons. - Circuit driving for high-powered vehicles. | $ 142.99 |
| ENDLESS CC60 (N30C) (Brake Pads) -EP292CC60 | ITEM DETAILS |
| Circuit Compound (Rally Use). Semi metallic. 150~800°C. Average friction coefficient: 0.50~0.60. | $ 136.06 |
 | ENDLESS MX72 (Brake Pads) -EP292MX72 | ITEM DETAILS |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 132.91 |
 | ENDLESS MX72 PLUS (Brake Pads) -EP292MXPL | ITEM DETAILS |
| Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 137.95 |
 | ENDLESS NEW Type R (Brake Pads) -EP292TRN | ITEM DETAILS |
| Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | DISCONTINUED |
 | ENDLESS NS97 (Brake Pads) -EP292NS97 | ITEM DETAILS |
| Street. Low steel (non-asbestos). 0~500°C. Average friction coefficient: 0.37~0.43. | DISCONTINUED |
 | ENDLESS SNP (Brake Pads) -EP292SNP | ITEM DETAILS |
| Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
 | ENDLESS SR01 (Brake Pads) -EP292SR01 | ITEM DETAILS |
| Sports pad with excellent controllability that is suitable for everything from city riding to driving events. Braking power from the moment you start driving. Street~circuit use. Material: Low steel. Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.35~0.40. | $ 117.79 |
 | ENDLESS SSM (Brake Pads) -EP292SSM | ITEM DETAILS |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
 | ENDLESS SSM PLUS (Brake Pads) -EP292MP | ITEM DETAILS |
| Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 132.91 |
 | ENDLESS SSS (Brake Pads) -EP292SS2 | ITEM DETAILS |
| Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 87.56 |
 | ENDLESS SSY (Brake Pads) -EP292SY2 | ITEM DETAILS |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
 | ENDLESS Type R (Brake Pads) -EP292TR | ITEM DETAILS |
| Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
 | ENDLESS W-003 (Brake Pads) -EP292W003 | ITEM DETAILS |
| Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 215.43 |
 | Project μ (Mu) D1 spec Inner SHOE (Brake Pads) -IS100A-D1SHOE | ITEM DETAILS |
| Designed for high speed drift. Side (hand) brake pads. Super graphite metallic. 50~450°C. | $ 112.82 |
 | Project μ (Mu) Sports Inner SHOE (Brake Pads) -IS100A-SP-INSHOE | ITEM DETAILS |
| Provides powerful initial braking force for initiation of spin turns and drift. Side (hand) brake pads. Non asbestos. 0~400°C. | $ 89.19 |
 | TRD Brake Pad (Black) (Brake Pads) -04491-JA820 | ITEM DETAILS |
| Street use. μ=0.48~0.32. 0~500°C. | DISCONTINUED |
 | Project μ (Mu) Exchange Rotor for SCR PRO (Brake Rotors) -GT012L + GT012R | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 267.87 |
 | Project μ (Mu) SCR PRO (Brake Rotors) -GPRT012 | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy. Suitable for circuit use. Pair of 2 (Left and right). This model uses a two-piece structure that is excellent in durability, heat resistance, and heat dissipation. High-alloy high-carbon FC cast iron greatly improves crack resistance. Original screw design achieves high heat dissipation. In addition, many hot air flow paths, and unlike other models, the fins are arranged at a slight angle to the center instead of perpendicularly, which increases the speed of the hot air flow and quickly dissipates heat. | DISCONTINUED |
 | Project μ (Mu) SCR Pure Plus 6 (Brake Rotors) -SPPT101-S6 | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 170.45 |
 | APP Brake Caliper Kit (Brake Upgrade Kits) -WC61P-JZS160 | ITEM DETAILS |
| Forged aluminium, heat resistant painted (blue) calipers. Lightweight 2 piece rotors, brackets, stainless mesh brake hoses, and brake pads. | $ 2142.29 |
 | APP Brake Caliper Kit (Titanium Coating) (Brake Upgrade Kits) -WC61K-JZS160 | ITEM DETAILS |
| Forged aluminium, titanium ion plated calipers for better heat and abrasion resistance. Lightweight 2 piece rotors, brackets, stainless mesh brake hoses, and brake pads. | $ 2746.68 |
 | Biot Front Brake Offset Kit (Brake Upgrade Kits) -BR.OS.F-30-S | ITEM DETAILS |
| Kit that replaces the standard brake rotors with larger diameter rotors and offsets the stock caliper outward from the center of the rotor using the included stays (brackets). Left and right set. | $ 867.69 |
 | ENDLESS System Inch Up Kit (6 POT) More Info (Brake Upgrade Kits) -ECZ6XJZS161 | ITEM DETAILS |
| 6POT big caliper with excellent cost performance that can accommodate rotors up to 370mm rotors. Caliper body is made from lightweight and highly rigid forged aluminum. Uneven wear of the brake pads is prevented and high controllability is achieved through the use of varying pistons. These features combined ensure stable braking force even in high-power tuned cars, and is the best match for street-spec sports cars equipped with high-output engines. 2 x Caliper (Alumite Blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2199.61 |
 | ENDLESS System Inch Up Kit (F and R Set) More Info (Brake Upgrade Kits) -ECZAXJZS161 | ITEM DETAILS |
| Front and rear set. | $ 3747.90 |
 | ENDLESS System Inch Up Kit (MONO 6 Sports TA) More Info (Brake Upgrade Kits) -EFZ6XJZS161 | ITEM DETAILS |
| Updated version of MONO 6 Sports caliper. Using the latest processing technology, the outer brake fluid pipe has been eliminated as an obstruction to the flow path and prevents fluid leakage due to pipe breakage. Weight has been reduced and the stress balance has been improved (rigidity increased by 12%) compared to the original MONO 6 Sports caliper product. The caliper surface is 3D-cut, which is effective for heat dissipation while looking good. 2 x Caliper (Blue Coating), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving slit, Blue Alumite), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2612.83 |
 | ENDLESS System Inch Up Kit (Racing 4) More Info (Brake Upgrade Kits) -ECZ8XJZS161 | ITEM DETAILS |
| 4POT rear calipers ideal for use when matched with front 6POT/6POT Wagon calipers (Sold separately). 2 x Caliper (Alumite Blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Alumite Blue, Curving slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2077.41 |
 | ENDLESS System Kit (Chibi Roku - 6 POT Compact Mini) More Info (Brake Upgrade Kits) -ECZ5XJZS161 | ITEM DETAILS |
| Compact size 6POT caliper ideal for use with cars using standard wheel sizes (16inch etc). The main body is made of lightweight and highly rigid forged aluminum, which not only has excellent durability and heat resistance, but also improves controllability during braking. This caliper allows you to easily obtain the reliable braking performance and direct pedal touch that the multi-piston caliper brings. 2 x Caliper (Blue alumite), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Standard size, curving slit) (Standard size), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 2050.64 |
 | Night Pager UCF30 Celsior Caliper Kit (Brake Upgrade Kits) -(GL)SHBKNPJZS16101 | ITEM DETAILS |
| Upgrade your brakes using UCF30 monoblock (single piece) calipers and 324mm diameter JZA80 rotors (most applications). Requires 65mm (or more) wheel clearance from brake rotor. Includes: 2 x modified UCF30 brake caliper (unpainted), 2 x brake rotor, sports brake pads and brake brackets (A2024 duralumin). | DISCONTINUED |
 | Project μ (Mu) Forged Sports Caliper Kit 4pistons x 4pads SIDE-B More Info (Brake Upgrade Kits) -FS44S-T208SB | ITEM DETAILS |
| Rear caliper kit for drifting with control of both the foot and parking brakes (e brake/side brake) within one caliper assembly. With two opposing pistons for the foot brake on one side and two opposing pistons to control the hydraulic handbrake on the other, this caliper kit is designed specially for drifting. Brake pad material of the foot brake and handbrake may be replaced with different compounds, enabling the braking system to be tailored to driver/track conditions. Caliper size: Total length : 282.8mm / Total width : 140.2mm (Excluding brake line attachment protrusion) / Total height : 80.0mm. Includes Type NS-C and D1 Spec pads as standard. Type NS/D1 Spec F can be optioned at time of order. Competition use only. Does not include hand lever, master cylinder or hydraulic lines (between master cylinder and caliper). | $ 1785.77 |
 | Project μ (Mu) FS44 Forged Sports Caliper Kit 4pistons x 4pads More Info (Brake Upgrade Kits) -FS44-T108A | ITEM DETAILS |
| The ideal configuration of one pad per piston for a total of eight synchronized pads, enabling optimal braking. Forged alloy aluminum construction helps increase strength while keeping cost reasonable. Caliper size: Total length : 282.8mm / Total width : 156.25mm (Excluding brake line attachment protrusion) / Total height : 72.3mm. Includes Type NS-C pads as standard, Type NS/D1 Spec F can be optioned at time of order. | $ 1768.76 |
 | TRUST GREX Brake System (Brake Upgrade Kits) -15015651 | ITEM DETAILS |
| Pair. | DISCONTINUED |
 | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | ITEM DETAILS |
| Performance damper unit only. | DISCONTINUED |
 | C-ONE Performance Bar (Chassis Bars) -FB5140-JS160 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO Lower Arm Bar Version II (Chassis Bars) -187 477 A | ITEM DETAILS |
| Reduce chassis flex even further with these bars that have multiple mounting locations (more than 2). This greatly increases rigidity and helps maintain chassis stiffness during the hardest of cornering. It also improves steering rigidity, response and tire traction. | $ 83.90 |
 | Do Luck Floor Support Bar (Chassis Bars) -42037 | ITEM DETAILS |
| DISCONTINUED |
 | Do Luck Rear Cross Bar (Chassis Bars) -90390 | ITEM DETAILS |
| DISCONTINUED |
 | NAGISA Auto Gachiri Support (Chassis Bars) -Gacchiri-Support_JZS160 | ITEM DETAILS |
| Inner fender braces. Patent approved, 3D CAD designed. Steel. | $ 161.38 |
 | Aragosta Type E (Coilover Kits) -3AAA.T7.E1.000 | ITEM DETAILS |
| Comfort. Optimum comfort for use on street to winding roads. Using parts exclusive to this kit, this kit has excellent initial damping, and boasts flat performance. 40/46mm steel cylinder. Full length adjustment (excluding some models). Rana springs. Aragosta lift up cup system available on some specifications. 2 Cup - Front. 4 Cup - Front and rear. | $ 1702.43 |
 | Aragosta Type S (Coilover Kits) -3AAA.T7.A1.000 | ITEM DETAILS |
| Sports. Optimum ride for winding roads to circuit. Sporty handling and excellent traction. Forged aluminum cylinder and Kashima coating. 40/46mm inverted strut (WPC processed). Full length adjustment function (excluding some models). High rigidity steel cylinder. Rana springs. Aragosta lift up cup system available on some specifications. 2 Cup - Front. 4 Cup - Front and rear. | $ 1964.34 |
 | Blitz Damper ZZ-R (Coilover Kits) -92750 | ITEM DETAILS |
| Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | $ 718.36 |
 | Buddy Club PRO Spec Damper (Coilover Kits) -(GL)SHCOBCJZS16101 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO e-con2 (Coilover Kits) -00B 60J 1212 | ITEM DETAILS |
| Real time, in cabin 40 Step Electronic Damping Force Controller. 7 colour illumination (selectable) display. | $ 294.65 |
 | CUSCO e-con2 G Sensor (Coilover Kits) -00B 60J G | ITEM DETAILS |
| Optional part for use with e-con2. By connecting the optional G sensor, the direction and level of front and rear, right and left G are displayed in real time. The display can be switched between hi range (1.5 G) and low range (0.5 G). Maximum G force can be stored with the peak memory function. | DISCONTINUED |
 | CUSCO Street Zero More Info (Coilover Kits) -187 61P CN | ITEM DETAILS |
| Low compression twin-tube shock absorber with redesigned base valve. Full height adjustable structure & fixed damper set at most ideal rate (8 way rear adjustable shocks included with some models). Precision cut shock case thread with special coating. Quiet operation. Ribbed lower bracket made with specific metal according to each vehicle. Custom spring rates available at no extra cost. | $ 698.43 |
 | CUSCO Street Zero A More Info (Coilover Kits) -187 61N CN | ITEM DETAILS |
| 40 step damping force adjustable. Full length/Ride Height Adjustable. | $ 818.48 |
 | GP Sports G-MASTER Suspension Kit (Coilover Kits) -501203S | ITEM DETAILS |
| DISCONTINUED |
 | HKS HIPERMAX S-Style X (Coilover Kits) -80120-AT203 | ITEM DETAILS |
| Full set. | $ 1154.70 |
 | OHLINS DFV Type HAL Complete Kit (Coilover Kits) -(GL)SHCO-OHL-JZS161-01 | ITEM DETAILS |
| Screw type full length adjustable coilover system. | $ 1951.25 |
 | TEIN Comfort SPORT (Coilover Kits) -GST76-K1SS3 | ITEM DETAILS |
| $ 1047.28 |
 | TEIN EDFC (Coilover Kits) -EDK04-K4469 + EDK05-12120 | ITEM DETAILS |
| Electronic Damper Force Controller. For use with TEIN suspension compatible with EDFC. | $ 258.82 |
 | TEIN Super Street (Coilover Kits) -GST76-A1SS2 | ITEM DETAILS |
| $ 602.03 |
 | TEIN Type FLEX (Coilover Kits) -GST76-61SS1 | ITEM DETAILS |
| $ 911.24 |
 | TRUST GReddy Performance Damper Type-S (Coilover Kits) -14012207 | ITEM DETAILS |
| Sports suspension kit suitable for enjoying the circuit, while maintaining ride quality around town on the streets. Linear damping force, supporting the stable driving. A wide range of damping characteristics makes it possible to achieve both supple ride comfort, and sports performance. | DISCONTINUED |
 | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | ITEM DETAILS |
| $ 12.60 |
 | PROVA Resevoir Tank Cover (Other) -90000JL0200 | ITEM DETAILS |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
 | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | ITEM DETAILS |
| Mechanical lifter kit. | DISCONTINUED |
 | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | ITEM DETAILS |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
 | IKEYA FORMULA Adjuster Rear Lower Arms (Rods and Control Arms) -IFAO20004 | ITEM DETAILS |
| Set of 2 (Left and right). | $ 423.67 |
 | IKEYA FORMULA Front Upper Arms (Rods and Control Arms) -IFAK13004-B (Old: IFAK13004) | ITEM DETAILS |
$ 646.28 |
 | IKEYA FORMULA Pillow Tension Rods (Rods and Control Arms) -IFAD06003 | ITEM DETAILS |
| $ 502.66 |
 | IKEYA FORMULA Rear Camber Adjuster Upper Arms (Rods and Control Arms) -IFAG11004 | ITEM DETAILS |
$ 574.47 |
 | IKEYA FORMULA Rear Toe Adjuster Rods (Rods and Control Arms) -IFAH13002 | ITEM DETAILS |
| $ 385.50 |
 | IKEYA FORMULA Roll Center Adjuster Pillow Lower Arm Kit (Rods and Control Arms) -IFAF08003 | ITEM DETAILS |
| Lower arm and pillowball tension rod kit. | $ 1044.44 |
 | IKEYA FORMULA Roll Center Adjuster Pillow Lower Arms (Rods and Control Arms) -IFAE10003 | ITEM DETAILS |
$ 545.75 |
 | IKEYA FORMULA Traction Adjuster Rods (Rods and Control Arms) -IFAM16002 | ITEM DETAILS |
| $ 247.36 |
 | ORIGIN Pillow Rear Lower Arm (Rods and Control Arms) -FW-RLA-T0002-SET | ITEM DETAILS |
| Toe adjustment arm. | DISCONTINUED |
 | SILK ROAD Front Upper Arms (Rods and Control Arms) -1BX-G07 | ITEM DETAILS |
$ 493.21 |
 | SILK ROAD Rear Tension Rods (Rods and Control Arms) -1B5-G06 | ITEM DETAILS |
| $ 209.19 |
 | SILK ROAD Rear Toe Rods (Rods and Control Arms) -1B5-G03 | ITEM DETAILS |
| $ 245.09 |
 | SILK ROAD Rear Upper Arms (Rods and Control Arms) -1BX-G02 | ITEM DETAILS |
| $ 520.61 |
 | SUPER NOW Tie Rod Ends (Rods and Control Arms) -(GL)SHRC-SNW0-SXE10-01 | ITEM DETAILS |
| NMB 3 piece pillow balls (spherical bearings). | DISCONTINUED |
 | URAS Futokusuru (Rods and Control Arms) -0105002-Toyota | ITEM DETAILS |
| Heavy duty tie rod adapter. Prevents pending of tie rods (even heavy duty types). Strengthens the screw part of tie rods, often the wek point of even aftermarket heavy duty tie rods. Length: 100mm, thickness: 25mm, thread pitch: M14 x 1.5. | $ 53.60 |
 | URAS Happy End (Rods and Control Arms) -0105002 | ITEM DETAILS |
| Inverse joint type heavy duty tie rod ends. For use with M14 x 1.5 tie rods or M12 x 1.25 Taper Knuckle. | $ 78.74 |
 | URAS Super Strengthened Tie Rods (Rods and Control Arms) -01065-3 | ITEM DETAILS |
| Strengthened and increased steering angle. | $ 74.96 |
 | URAS Tie Rod Extension (Rods and Control Arms) -01060 | ITEM DETAILS |
| "Tsukitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | $ 53.98 |
 | URAS Tie Rod Extension (Short) (Rods and Control Arms) -0105001 | ITEM DETAILS |
| "Cyoitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | DISCONTINUED |
 | RS-R RS-R Down Suspension Coil (Springs) -T222D | ITEM DETAILS |
$ 162.51 |
 | RS-R Ti2000 Suspension Coil (Springs) -T222TD | ITEM DETAILS |
| Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. | $ 251.77 |
 | TANABE SUSTEC DF210 (Springs) -JZS161DK | ITEM DETAILS |
| Dress Up Form. Set of 4. | $ 146.14 |
 | TANABE SUSTEC NF210 (Springs) -JZS161NK | ITEM DETAILS |
| Normal Feeling. Set of 4. | $ 214.17 |
 | TEIN Custom Made Spring Set (Springs) -CM-SKT76-G1B00 | ITEM DETAILS |
| Made to order custom spring set (Minimum 21 days). | $ 396.84 |
 | TEIN HIGH.TECH Springs (Springs) -SKT76-G1B00 | ITEM DETAILS |
| Luxury Master. Stylish and comfortable - the ultimate lowering springs. Light weight and flexible vanadium alloy (SAE9254) provides longer stroke, improving the spring's capability to absorb bumpiness/roughness of road surfaces, thus providing better maneuverability and stability. Not only durable, but also provides sag prevention qualities. Perfect spring rate designed for each vehicle type. | DISCONTINUED |
 | TEIN S.TECH Springs (Springs) -SKT76-S1B00 | ITEM DETAILS |
| Dress Up Master. Easy lowering springs, in green to brightly decorate your suspension. Simple suspension tuning for beginners - at an affordable price. | DISCONTINUED |
 | TRUST GReddy BL Comfort Down Spring (Springs) -14011331 TYG031 | ITEM DETAILS |
| BL Comfort Springs produces an attractive style with a moderate drop in ride height while maintaining a comfortable ride. Designed for safe and calm handling characteristics even with the lowered ride height. Vanadium is mixed as metal additive in order to be durable for hard repetition of extension and compression during sports driving. The springs maintain high strain and high heat resistance and is durable against sag, maintaining stable performance. Different from springs designed only for low ride height, TRUST GReddy pursued the ideal design as a tuning parts maker. Total balance was considered while using the standard genuine shock absorber, calculate preload and it ensures stable traction when cornering. BL Comfort Spring is considered rebound performance conspicuous, and simultaneously enables comfortable ride, spring rate is suitable 10-20% up than standard genuine spring. Black coated, double shot peened. | $ 173.22 |
 | CUSCO Strut Tower Bar Type 40 (Strut Tower Bars) -187 525 A | ITEM DETAILS |
| 40mm Aluminium shaft. Center Bar: Engineered inside and out, the stylish 40mm cross section made of lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex. Brackets: The aluminum end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | $ 99.02 |
 | CUSCO Strut Tower Bar Type AS (Strut Tower Bars) -187 510 A | ITEM DETAILS |
| Aluminum Circular Shaft. Center Bar: The most simple and lightweight aluminum shaft bar made hollow for lightweight and rigid characteristics. Brackets: The steel end plate brakets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. | $ 65.01 |
 | CUSCO Strut Tower Bar Type CB (Strut Tower Bars) -187 551 A | ITEM DETAILS |
| 40mm Carbon Fiber. Center Bar: The most lightweight and rigid strut bar available, made from 100% layered carbon fiber for extreme lightness and unmatched strength. Brackets: The steel end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | $ 144.37 |
 | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -187 540 A | ITEM DETAILS |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 79.18 |
 | TRD Sportivo Shock Absorber Set (Suspension Kits) -48030-JSZ00 | ITEM DETAILS |
| DISCONTINUED |
| TRD Sportivo Spring Set (Suspension Kits) -48130-JSZ00 | ITEM DETAILS |
| DISCONTINUED |
| TRD Sportivo Stabiliser Set (Suspension Kits) -48800-JSZ00 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Sportivo Suspension Full Set (Suspension Kits) - | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | ITEM DETAILS |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
 | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | ITEM DETAILS |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
 | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | ITEM DETAILS |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | ITEM DETAILS |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | ITEM DETAILS |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | ITEM DETAILS |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | ITEM DETAILS |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | ITEM DETAILS |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
 | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | ITEM DETAILS |
| $ 218.89 |
 | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | ITEM DETAILS |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
 | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
 | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
 | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
 | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
 | TRD Lug Nut Set (Wheel Nuts) -42607-SP020 | ITEM DETAILS |
| 20 nuts and socket. M12 x 1.5. For use with wheels with nut hole diameter greater than 21mm. Not suitable for use with Toyota OEM wheels. | DISCONTINUED |
| WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | WORK Lock Nut Set (Wheel Nuts) -240254 | ITEM DETAILS |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
 | WORK RS Nut (Wheel Nuts) -240007 | ITEM DETAILS |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
Suspension Parts
 | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | ITEM DETAILS |
| $ 28.47 |
 | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | ITEM DETAILS |
| $ 27.46 |
 | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | ITEM DETAILS |
| $ 38.55 |
 | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | ITEM DETAILS |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
 | TRUST GReddy Front Skirt (Front Spoilers (Lip Spoilers)) -17010051 | ITEM DETAILS |
| $ 136.37 |
 | D.Speed Tail Stop Lamp (Lights (Head, Tail, Indicator)) -(GL)ETHL-DSP-JZS161-01 | ITEM DETAILS |
| $ 165.10 |
 | Garage Vary Universal Turbulator (Other) -30-4001 | ITEM DETAILS |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
 | KENSTYLE Accent Screws (Other) -(GL)AS01 | ITEM DETAILS |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
 | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | ITEM DETAILS |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
 | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | ITEM DETAILS |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
Other Parts
 | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | ITEM DETAILS |
| Universal. Pair (Left and right). | $ 95.05 |
 | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | ITEM DETAILS |
| Universal. Pair (Left and right). | $ 149.29 |
 | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | ITEM DETAILS |
| Universal. Pair (Left and right). | DISCONTINUED |
 | SARD Aero Blade (Exterior Parts) -61967 | ITEM DETAILS |
| Sold individually (1 piece). | $ 20.31 |
 | SARD Front Bumper Canard (Exterior Parts) -61965 | ITEM DETAILS |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
 | SARD Front Under Flap (Exterior Parts) -61966 | ITEM DETAILS |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
 | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | ITEM DETAILS |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
 | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | ITEM DETAILS |
| $ 217.69 |
 | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | ITEM DETAILS |
| Gas/Petrol cap cover. | DISCONTINUED |
 | Blitz i-Burner Expansion Kit (Globes) -14566 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz i-Burner Spark Lights (Globes) -14565 | ITEM DETAILS |
| DISCONTINUED |
 | Ganador Super Mirror (Mirrors) -SM-40PCL | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Cable Ties (Other) -18001742 | ITEM DETAILS |
| GReddy logo cable ties. | $ 14.19 |
 | HKS Emblem (Stickers and Emblems) -51003-AK027 | ITEM DETAILS |
| Silver. 87 x 35mm. | DISCONTINUED |
 | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | ITEM DETAILS |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
 | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | ITEM DETAILS |
| ABS resin emblem of Tuned by HKS. Size：115mm x 19mm. | $ 28.22 |
 | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | ITEM DETAILS |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
 | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | ITEM DETAILS |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
 | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | ITEM DETAILS |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
 | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | ITEM DETAILS |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
 | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | ITEM DETAILS |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
 | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | ITEM DETAILS |
| HKS logo on oil color. | $ 12.35 |
 | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | ITEM DETAILS |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
 | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | ITEM DETAILS |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
 | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | ITEM DETAILS |
| Small-sized transcription sticker. | $ 12.35 |
 | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
 | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | ITEM DETAILS |
| High brightness reflective sheet. | $ 24.76 |
 | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | ITEM DETAILS |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
 | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | ITEM DETAILS |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
 | TOMEI 70 Sticker (Stickers and Emblems) -761031 | ITEM DETAILS |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
 | TOMEI Emblem (Stickers and Emblems) -763000 | ITEM DETAILS |
| 120 x 22mm. | $ 19.65 |
 | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | ITEM DETAILS |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
 | Top Fuel Emblem (Stickers and Emblems) -26735831 | ITEM DETAILS |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
 | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Towing Strap (Tow Hooks/Straps) -13890 | ITEM DETAILS |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
 | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | ITEM DETAILS |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
 | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | ITEM DETAILS |
| $ 41.04 |
 | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | ITEM DETAILS |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
 | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | ITEM DETAILS |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
 | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | ITEM DETAILS |
| Set of 4. | $ 19.84 |
 | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | ITEM DETAILS |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
 | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | ITEM DETAILS |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
 | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | ITEM DETAILS |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
 | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | ITEM DETAILS |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
 | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | ITEM DETAILS |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
Back | Back to TOPCan't find a part or not listed for your model?
Email: [email protected]
Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.
|
Customer Services Contact Us Purchasing Information International Shipping Payment Methods Currency Conversion |
Don't Miss Out Mailing List Specials Product Catalogue |
About Greenline About Greenline |
We specialise in shipping internationally!
And offer local delivery by special arrangement.
© Greenline Motorsports, 2002-2026 Terms and Conditions, Privacy Policy
A Gosaru Solution
