| Categories: | |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | |
| Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz R-FIT (Engine Management) -15120 | |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
![]() | TRUST GReddy e-manage (Engine Management) -15500510 (Old: 15500500) | |
| TRUST Greddy e-manage (Blue). Piggy back engine management system that enables fuel adjustment to effeectively derive power regardless of power, from beginners to high end users. Requires e-manage Harness Kit - Injector and e-manage Harness Kit (Ignition) (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
![]() | TRUST GReddy e-manage Harness Kit - Ignition (Engine Management) -15900902 | |
| Option part for use with Trust GReddy e-Manage. For ignition timing control (Where car specific harness is not available). | DISCONTINUED |
![]() | TRUST GReddy e-manage Harness Kit - Injector (Engine Management) -15900901 | |
| Option part for use with Trust GReddy e-Manage. For main and sub-injector control (Where car specific harness is not available). | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
![]() | TRUST GReddy e-manage O2 Sensor Adapter 1 (Engine Management) -15900908 | |
| For use with Trust GReddy e-manage. Cuts O2 sensor feedback signal beyond a set engine rpm. e-manage jumper settings will need to be set to VTEC control. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate More Info (Engine Management) -15500501 | |
| Engine Control Unit Manager ULTIMATE. The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. Requires harness kit (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate O2 Sensor Adapter 1 (Engine Management) -15900908 | |
| For use with Trust GReddy e-manage Ultimate. Cuts O2 sensor feedback signal beyond a set engine rpm. e-manage jumper settings will need to be set to VTEC control. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit (Engine Management) -15901500 | |
| Universal harness. For applications where no car specific harness is available. 18P, 14P, 12P connectors and wiring set. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit Type 2 (Engine Management) -15901510 | |
| Universal harness. For applications where no car specific harness is available. With current reverse flow diode. 18P, 14P, 12P connectors and wiring set. | $ 106.71 |
![]() | TRUST GReddy e-manage Ultimate Vehicle Specific Harness (Engine Management) -15911507 | |
| Plug and play harness. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Vehicle Specific Harness (Engine Management) -15910912 | |
| Plug and play harness. Injector and ignition harnesses not required when using this product with TRUST e-manage. | DISCONTINUED |
![]() | TRUST GReddy Extension Harness More Info (Engine Management) -15911100 | |
| ECU wiring harness extension for splicing in electronic parts, preserving your standard harness. Suitable for GReddy e-manage, GReddy e-manage Ultimate, GReddy v-manage, GReddy f-manage. | DISCONTINUED |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | |
| DISCONTINUED |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | |
| Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
![]() | Blitz E-ESC (Other Controllers) -16087 | |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | |
| $ 73.45 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | |
| $ 115.02 |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | |
| Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | |
| DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | |
| DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | |
| For use with Okachan Water Temp oC. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP (Performance Meters) -405-A012 | |
| The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. This new aesthetically pleasing model was crafted to match the likes of other highly popular APEXi electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of APEXi's line up. The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km/h b 0 times, user defined Mid Range Acceleration, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For acceleration and timing accuracy.), and Vehicle weight input. One of the most exiting of the new features is the option to utilize the revolutionary APEXi G-Sensor (Sold separately.). The G Sensor allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G on the race track, or used in an array of new features including: Highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, Horse Power Calculation, and Loss Power Calculation. By taking advantage of the optional G Sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel-spin. Using the G Sensor modifies the speed sensor signal, compensating for wheel-spin and producing impeccably accurate acceleration times. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP G-Sensor (Performance Meters) -430-A013 | |
| An added feature to the Rev Speed Meter GP, the G-Sensor unit allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G's on the race track, or used in an array of new features including: highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, horse power calculation, and loss power calculation. By taking advantage of the optional G-sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel spin. The G-sensor modifies the speed sensor signal, compensating for wheel spin and producing impeccably accurate times. For use with APEXi Rev/Speed Meter GP (Sold separately). | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP Shift Lamp (Performance Meters) -430-A011 | |
| With the optional shift indicator light, you can easily incorporate shift points into an A'PEXi Rev Speed Meter-GP (Sold separately). | DISCONTINUED |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | |
| DISCONTINUED |
![]() | ARK Design Meter Stand (Performance Meters) -01-0106X-L | |
| DISCONTINUED |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | |
| DISCONTINUED |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | |
| DISCONTINUED |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | |
| Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
![]() | HKS CAC Cute (Performance Meters) -44007-AK002 | |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | |
| DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | |
| $ 66.77 |
![]() | HKS OB-LINK Type-001 More Info (Performance Meters) -44009-AK002 | |
| Connects to vehicle's OBD II connector for display of vehicle data on iOS/Android via Bluetooth. "Carscope" and "OB-BRIDGE" applications available for download from iTunes/Google Play. In addition, the information is logged within its internal memory, and can be setup and accessed via the HKS OB LINK Log Manager app (available from iTunes/Google Play). | DISCONTINUED |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | |
| Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | |
| Part included with A/F Device (repair part). | $ 311.80 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | |
| Part included with A/F Device (repair part). | $ 112.25 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | |
| Part included with A/F Device (repair part). | $ 17.46 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | |
| DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | |
| For NA and Turbo. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | Daikei Boss Kit (Boss Kits) -S-718 | |
| Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 81.26 |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | |
| DISCONTINUED |
![]() | FET QRS III (Boss Kits) -FQS005 | |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
![]() | FET QRS III Steering Plate (Boss Kits) -FQS006 | |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | HKB Boss Kit (Boss Kits) -OT-235 | |
| Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 48.44 |
![]() | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | |
| $ 16.38 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | |
| DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | |
| For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
![]() | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
![]() | Works Bell Boss Kit More Info (Boss Kits) -537 | |
| Depending on vehicle, normal, airbag, and/or auto cruise types available. Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 67.65 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
![]() | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | |
| Steering wheel quick release system for competition cars. | $ 208.50 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
![]() | Works Bell Short Boss for Rapfix More Info (Boss Kits) -537S | |
| Short type (low height) boss kit ideal for use with Works Bell Rapfix. Suitable for 70mm x 6 PCD (MOMO, OMP, SIMONI Racing) type steering wheels. | $ 72.38 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | |
| Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | |
| DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | |
| DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | |
| $ 1530.66 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | |
| $ 17.13 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | |
| On dash type. | $ 118.74 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | |
| $ 11.97 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | |
| $ 8.00 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | |
| $ 32.44 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | |
| DISCONTINUED |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | |
| DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | |
| Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | |
| $ 95.49 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | |
| $ 507.57 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | |
| DISCONTINUED |
![]() | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
![]() | SARD 4 Point Harness (Harnesses) -80221 | |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
![]() | SARD 6 Point Harness (Harnesses) -80223 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
![]() | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | |
| $ 29.61 |
![]() | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
![]() | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | |
| $ 519.04 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | |
| $ 110.55 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | |
| $ 116.22 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | |
| DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | |
| Set of 2. | $ 19.27 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | |
| 4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | |
| Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | |
| Pair. | $ 21.10 |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | |
| 4 x 4 point harness. | DISCONTINUED |
![]() | OKUYAMA DASH Heel Adjust Plate (Other) -315 020 0 | |
| Driver's side floor plate. RHD vehicles only. | DISCONTINUED |
![]() | BRIDE FG Type Super Seat Rail (Seat Accessories) -T001FG | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for RECARO SP-G, SPARCO Prodrive, AAR Racing, Cobra and other full bucket seats within size limits of seat rail. Sliding type. | $ 112.63 |
![]() | BRIDE FX Type Super Seat Rail (Seat Accessories) -T001FX | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
![]() | BRIDE IG Type Super Seat Rail (Seat Accessories) -T001IG | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for RECARO SP-G, SPARCO Prodrive, AAR Racing, Cobra and other full bucket seats within size limits of seat rail. Aluminium side brackets. Sliding type. | $ 112.63 |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
![]() | BRIDE MO Type Super Seat Rail (Seat Accessories) -T001MO | |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 144.75 |
![]() | BRIDE RO Type Super Seat Rail (Seat Accessories) -T001RO | |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 131.37 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | |
| $ 32.31 |
![]() | BRIDE YO Type Super Seat Rail (Seat Accessories) -T001YO | |
| For use with BRIDE reclinable seats (BRIX, ERGO, XAX, REVS). Super Low Position (maximum -30mm). | DISCONTINUED |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | |
| DISCONTINUED |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
![]() | Prodrive Competition Seat (Seats) -55660011 | |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
![]() | TRD Shift Knob (5 Speed MT) (Shift Knobs) -MS204-52001 | |
| Black leather with red stitching. Centre section aluminium (TRD Logo). For 5 speed models. M12 x 1.25. | DISCONTINUED |
![]() | Blitz Sports Steering Wheel (Steering Wheels) -13530 | |
| DISCONTINUED |
![]() | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
![]() | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
![]() | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | |
| D shape steering wheel. | $ 453.53 |
![]() | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | |
| Round shape steering wheel. | $ 535.42 |
![]() | MOMO MOD.08 (Steering Wheels) -M-58 | |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
![]() | Nardi Personal Blitz (Steering Wheels) -P071 | |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
![]() | Nardi Personal Blitz Leather (Steering Wheels) -P075 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
![]() | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
![]() | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
![]() | Nardi Personal Neo Grinta (Steering Wheels) -P024 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
![]() | Nardi Personal Pole Position (Steering Wheels) -P002 | |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
![]() | Nardi Classic Punching Leather (Steering Wheels) -N005 | |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
![]() | Nardi Classic Smooth Leather (Steering Wheels) -N111 | |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
![]() | Nardi Classic Suede Leather (Steering Wheels) -N115 | |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
![]() | Nardi Personal Trophy (Steering Wheels) -P051 | |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | SARD Steering - D-shape (Steering Wheels) -80219 | |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
![]() | SARD Steering - Semi Deep (Steering Wheels) -80227 | |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
![]() | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
![]() | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
![]() | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
![]() | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
![]() | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
![]() | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
![]() | Blitz Advance Power Cleaner More Info (Air Filters) -42059 | |
| Superceding the BLITZ Sonic Power Cleaner, the new Blitz Advance Power Cleaner uses a stainless steel mesh filter that produces high inhalation efficiency and racy intake sound. Cooling shield with large diameter funnel shields radiant heat from the engine bay, preventing heat soak of the filter. By suppressing the rise in the temperature of the filter, high filling efficiency is maintainted providing a stable suction temperature. With the variable shield structure, it is possible to secure a large amount of air around the filter, and it is effective for instantaneous increase of intake air. Large diameter funnels efficiently supply a large amount of air, achieving high suction efficiency. Cooling shield made of aluminum, with blue anodized lock plate. | $ 217.57 |
![]() | Blitz Carbon Power Air Cleaner More Info (Air Filters) -35059 | |
| Uses the highly acclaimed stainless mesh filter from SUS Power/Advance Power air cleaners. Conical body with "M" folds maximise the intake area, while balancing dust collecting ability with intake efficiency. The carbon shield deflects surrounding heat, preventing intake air temperature from rising. Being made from carbon, the shield itself emits very little heat. With proper care and maintenance, the stainless mesh filter can be used indefinitely. | $ 299.83 |
![]() | Blitz Sonic Power Air Cleaner (Air Filters) -58059 | |
| DISCONTINUED |
![]() | Blitz SUS Power Air Cleaner More Info (Air Filters) -26059 | |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | $ 122.70 |
![]() | Blitz SUS Power Core Type LM More Info (Air Filters) -56059 | |
| Filter colour: blue. | $ 106.14 |
![]() | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59059 | |
| Filter colour: red. | $ 89.63 |
![]() | TRUST GReddy AIRINX B-Type (Air Filters) -12511022 (TY-M022B) | |
| Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | DISCONTINUED |
![]() | ZERO1000 Carbon Filter Shield (Air Filters) -913-C001 | |
| Option carbon filter heat shield for use with ZERO1000 power chamber filters (sold separately). Affixed with air filter hose band. | $ 56.82 |
![]() | ZERO1000 Power Chamber Type 2 (Air Filters) -102-T007 | |
| Carbon Type. POWER CHAMBER an intake system designed to improve engine power, torque and response by utilizing inlet airflow to the engine bay. TYPE-2 is composed of a premium carbon tube for the chamber section and polished aluminum pipes that enhance racing appearance to the engine bay as well as improve engine performance while reducing weight. POWER CHAMBER TYPE-2 provides you cool aspiring sound that you can never experience with ordinary intake systems and makes you feel fun in driving! | $ 203.21 |
![]() | Apex APEXi Power Intake Filter More Info (Air Filters (Panel/OEM) Type) -503-T108 | |
| Factory replacement filter featuring: Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt. Dry-type filter element requires no oiling, and will not foul air flow sensors. Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed. Easy intallation, cleaning, and maintenance. | $ 31.56 |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | |
| DISCONTINUED |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
![]() | 5 Zigen Pro Racer Header (Exhaust Manifolds (NA) / Headers) -BTOEX06-P | |
| SUS304. | $ 502.53 |
![]() | TRD Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -17100-NP100 | |
| DISCONTINUED |
![]() | FUJITSUBO POWER Getter (Exhaust Systems (Cat Back)) -150-21114 | |
| $ 410.95 |
![]() | FUJITSUBO Wagolis (Exhaust Systems (Cat Back)) -450-21114 | |
| $ 360.55 |
![]() | HKS Hi-Power 409 (Exhaust Systems (Cat Back)) -32003-AT013 | |
| The real street sports muffler. HKS Hi-Power 409 mufflers offer a cost effective solution for your sports muffler needs. The rear section is made from SUS304 grade stainless steel for a high lustre finish, while the piping section, which is not visible once fitted, is made from coated SUH409, reducing cost. SUH409 has other benefits such as being more resistant to thermal expansion and improved acoustic properties. SUH409 has the ability to absorb more sound than SUS304 which allows Hi-Power 409 mufflers to have a straight through design without fear of excessive noise. | DISCONTINUED |
![]() | KAKIMOTO Racing GTbox 06&s (Exhaust Systems (Cat Back)) -T42358 | |
| Sporty model maintaining low/middle speed torque while also improving performance in the high rpm range. | $ 322.51 |
![]() | KAKIMOTO Racing hyper GT box Rev. (Exhaust Systems (Cat Back)) -T41358 | |
| $ 322.82 |
![]() | KAKIMOTO Racing Inner Silencer (Exhaust Systems (Cat Back)) -SIS001 | |
| $ 46.61 |
![]() | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A002 | |
| The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
![]() | Apex APEXi GT-Spec Radiator Cap (Breather Tanks) -591-A001 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | |
| DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | |
| DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | |
| $ 13.04 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | |
| Universal gear oil cooler kit. | $ 792.41 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | |
| Universal differential oil cooler kit. | $ 776.35 |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | |
| 1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | |
| 1 piece. | DISCONTINUED |
![]() | TRUST Gear Oil Pump (Other) -12004820 | |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
![]() | TRUST GReddy Washer Tank (Other) -13506101 | |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
![]() | TRUST GReddy Radiator Cap (Radiator Caps) -13901003 | |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $ 19.53 |
![]() | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901001 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | Billion Super Solid Coolant Line (Radiator Pipes and Hoses) -BWL-410 | |
| DISCONTINUED |
![]() | KOYO High Pressure Radiator Cap (Radiators) -SK-C13 | |
| Rust resistant stainless steel and chrome plated finish. Special synthetic rubber that is resistant to heat and corrosion. 1.3 kg/cm2 (127kPa). | $ 20.13 |
![]() | KOYO Type-Z Radiator (Radiators) -KV010862R | |
| Aluminium 2 row 53mm (wide) core. All aluminium type. Top level cooling performance while still being light weight. With heat dissipation up up to 35% greater than standard radiators, it is perfect for high power, full tune engines. | $ 588.64 |
![]() | SARD Racing Radiator (Radiators) -29017 | |
| Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. | DISCONTINUED |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
![]() | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | |
| Universal transmission oil cooler kit. | $ 829.89 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
![]() | JUN Camshaft (Camshafts and Camshaft Kits) -1004M-T031 | |
| $ 310.54 |
![]() | JUN Super Connecting Rods (Connecting Rods and Parts) -1002M-T008 | |
| SCM440 I Beam connecting rods. | $ 556.83 |
![]() | SILK ROAD SECTION Sports Engine Torque Damper (Engine Torque Dampers) -10Q-N08 | |
| The vehicle body and engine are connected with specially developed spring type torque damper (rubber in some vehicle applications), effectively suppressing the shaking of the engine, not fully absorbed by the engine mount(s) alone. The torque damper body has a built-in dedicated spring set to each vehicle type. In addition, the rod end part also adopts a proprietary resin liner, providing durability. * In some applications, significant vibration from the engine will be transmitted to the cabin when using this product. Vehicle specific kits include the damper body, brackets and all other parts required for fitting. Vehicle specific kits have been designed and tested for installation and use on JDM right hand drive models. Standard colours: Chrome/Gun Metallic. Optional colours available (please contact us for options). | $ 155.33 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | |
| DISCONTINUED |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | |
| DISCONTINUED |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | |
| DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | |
| DISCONTINUED |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | |
| DISCONTINUED |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | |
| $ 4.03 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | |
| $ 194.32 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
![]() | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | |
| $ 283.46 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | |
| Mount bracket. | $ 32.88 |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | |
| Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
![]() | mature HIGHSPARK Ignition Coil (Ignition System Parts) -EB1 | |
| Specially tuned ignition coils with modified coil design that raises the secondary voltage output. By outputting a high and stable secondary voltage, engine quietness, increased torque and response idle/low rpm, and high output during acceleration. | $ 173.98 |
![]() | OKADA Projects Plasma Direct (Ignition System Parts) -SD204051R | |
| Ignition coil with a built in high power amplifier. Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Plug and play installation. Compatible with OBD-II (On-Board-Diagnostics). | $ 538.56 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | |
| DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | |
| DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | |
| DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | |
| DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | |
| DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | |
| Universal kit. 1000ml. | $ 92.60 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | |
| Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | |
| Universal kit. 680ml. | $ 87.24 |
![]() | Blitz Racing Oil Filter (Oil Filters) -18712 (B-1220) | |
| A high-performance oil filter that Blitz has worked on, with a proven track record in filters for air cleaners. Durability above regulation level in JIS impulse durability tests. Designed exclusively for maximizing filtration performance of the filter itself. By increasing the filter strength, it corresponds to the high standard among all load conditions. | $ 21.13 |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | |
| Power steering fluid tank. | DISCONTINUED |
![]() | Blitz Compressor System (Supercharger Kits) -10147 | |
| DISCONTINUED |
![]() | TRD Direct Clutch Line (Clutch Hoses) -90947-NP100 | |
| Stainless mesh hose. | DISCONTINUED |
![]() | OS Giken Super Single (Press Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SS-OHA | |
| $ 238.73 |
![]() | ATS Carbon Clutch (Single Plate) More Info (Clutches) -CT231132-13 | |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. | $ 883.43 |
![]() | ATS KOYO Clutch Bearing (Clutches) -RCT4067L1 | |
| $ 24.82 |
![]() | ATS Metal Clutch (Single Plate) More Info (Clutches) -RT231130-13 | |
| ATS metal clutches are manufactured with the extensive experience ATS has in the performance drive train industry. Utilizing 230mm (9 inch) diameter metal clutch disc(s), the torque capacity has been significantly raised and the cushioning disc design ensures the very smooth engagement. From the discs to every bolt, all ATS parts are carefully selected to meet ATS's high standard of quality. In the process of manufacturing, extra attention is paid to ensure the clutch is very light, without increasing vibration levels, and without sacrificing its structural strength. The ATS metal clutch generates superior shift feel with excellent performance and durability. | $ 520.30 |
![]() | CUSCO Clutch Cover (Clutches) -00C 022 B151 | |
| $ 138.07 |
![]() | CUSCO Copper Disc (Clutches) -00C 022 R122 | |
| Copper clutch disc. | $ 130.01 |
![]() | CUSCO Copper Single Set (Clutches) -122 022 F | |
| Copper Single Disc and Clutch Cover Set. | $ 266.86 |
![]() | CUSCO Metal Disc (Clutches) -00C 022 C205T | |
| Metal clutch disc. | $ 143.62 |
![]() | CUSCO Metal Set (Clutches) -122 022 G | |
| Metal Disc and Clutch Cover Set. | $ 268.78 |
![]() | EXEDY Single Sports Series Clutch Cover (Clutches) -TC03T | |
| $ 141.10 |
![]() | EXEDY Single Sports Series Clutch Disc (Clutches) -TD03H | |
| $ 144.56 |
![]() | EXEDY Single Sports Series Clutch Set (Clutches) -TK02H | |
| Disc and cover set. Approximately 40% higher clamp load than the standard clutch. | $ 262.35 |
![]() | ORC Light Series ORC-250-Light (Clutches) -250L-TT0911 | |
| The fun of a manual transmission car is not only higher output and drifting, there is also the pleasure of comfortable operation by the driver. However, until now, the enjoyment of the reinforced clutch was a little different due to being difficult to use. This single plate clutch unit has the same operation feeling as the standard clutch. ORC's Light Clutch series is are clutches that allows the engine to run lightly, maintaining the fun of changing gears while providing good feel in semi engaged conditions. | $ 539.19 |
![]() | ORC Metal Series ORC-309 (Clutches) -ORC-309D-TT0911 | |
| Single Plate Clutch. ~340N/m (35kgf/m). | $ 559.35 |
![]() | OS Giken Super Single (Clutches) -(GL)DTCLOSG-NCP13-SSP-204 | |
| The Super Single clutch kit was designed to provide power holding performance for your simple bolt on equipped vehicle. This kit should also be able to handle the heat capacity requirements of track and aggressive use. For a balance of performance and longevity, this clutch is ideal for applications with less than 400 lb/ft (540 N/m, 55 kg/m) of torque. | $ 502.91 |
![]() | TRD Clutch Cover (Clutches) -31210-AE100 | |
| This clutch cover provides you the optimal clutch performance with either metal type or robust sports facing type discs. Complete your clutch tuning with a high-performance discs (Sold separately) and cover set. | DISCONTINUED |
![]() | TRD Clutch Disc (Metal Facing Type) (Clutches) -31250-AE963 | |
| TRD metal clutch discs were specially developed to handle the harsh use demanded particularly by hard motor sports racing and high-output engines. The plate employs reinforced bolts and springs, and the facing uses a special alloy pad that exhibits high anti-wear characteristics. | $ 208.81 |
![]() | TRD Clutch Disc (Sports Facing Type) (Clutches) -31250-NP900 | |
| With its reinforced plate and a facing pad that boasts outstanding durability, the TRD sports facing clutch disc is a truly amazing clutch disc that exhibits stable operation and feel even when used under intense clutch work or for long periods of time. It can be used for purposes ranging from gymkhana driving, with its demands for miraculous clutch work, to street and motor sports racing. | DISCONTINUED |
![]() | CUSCO Compact LSD Type RS (Differentials) -LSD 111 H | |
| LSD designed specifically for compact cars. Stable traction for street to circuit applications. RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. | $ 554.31 |
![]() | CUSCO LSD Type MZ More Info (Differentials) -LSD 111 A | |
| LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 554.31 |
![]() | CUSCO LSD Type RS More Info (Differentials) -LSD 111 F | |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 554.31 |
![]() | KAAZ LSD (Differentials) -DBT1621 | |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 652.89 |
![]() | KAAZ LSD Super Q (Differentials) -DBT1621SQ | |
| All the features of KAAZ standard type LSD with WPC treated clutch discs for further durability. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 717.14 |
![]() | JUN Light Weight Flywheel (STD) (Flywheels) -2001M-T027 | |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $ 278.42 |
![]() | SILK ROAD Chromoly Light Weight Flywheel (Flywheels) -FW32 | |
| Light weight, direct replacement flywheel made from chromoly steel. Suitable for use with standard clutch disc and cover. | $ 247.36 |
![]() | TRD Toyota Flywheel Bolt Set (Flywheels) -90913-01024 x 6 | |
| $ 4.78 |
![]() | TRD Lightweight Flywheel (Flywheels) -13405-NP100 | |
| Chromoly steel. | DISCONTINUED |
![]() | C-ONE Shift Lever Mount Bush (Other) -CG3353-SP001 | |
| Aluminium. Set of 4. | DISCONTINUED |
![]() | CUSCO BCS More Info (Brake Cylinder Stoppers) -114 561 A | |
| Brake cylinder stopper (BCS). Suppresses bulkhead deflection that occurs when applying brakes by reinforcing the brake master cylinder. Provides for more direct braking feel. For right hand drive models. | $ 53.23 |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
![]() | ENDLESS CC-A (Brake Pads) -EP382CCA | |
| Street. Ceramic Carbon Metal. 50~480°C. Average friction coefficient: 0.38~0.45. | DISCONTINUED |
![]() | ENDLESS CC-Rg (Brake Pads) -EP382CRG2 | |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 121.57 |
![]() | ENDLESS CC32 (Brake Pads) -EP382CC32 | |
| Circuit Compound. Low steel. 50~650°C. Average friction coefficient: 0.30~0.32. | $ 125.98 |
![]() | ENDLESS CC35 type-E (N84M) (Brake Pads) -EP382CC35E | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.30~0.35. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 249.44 |
![]() | ENDLESS CC38 (ME22) (Brake Pads) -EP382CC38 | |
| Circuit Compound. Semi metallic. 150~800°C. Average friction coefficient: 0.33~0.38. Based on the CC40 (ME20) compound, this variation with slightly lowered friction coefficient, allows for more control. Ideal for medium weight vehicles with high breaking loads or heavy vehicles on low speed circuits. | $ 142.99 |
![]() | ENDLESS CC40 (ME20) (Brake Pads) -EP382CC40 | |
| Circuit Compound. Semi metallic. 0~650°C. Average friction coefficient: 0.22~0.28. As used in top level 24 hour endurance races (Nurburgring, Spa etc). Lowered friction coefficient, allows for reduced temperature fluctuation and consistent control, reducing the burden on drivers. | $ 142.99 |
![]() | ENDLESS CC43 (N35S) (Brake Pads) -EP382CC43 | |
| Circuit Compound. Semi metallic. 300~800°C. Average friction coefficient: 0.40~0.43. These brake pads deliver stable performance even under high temperatures and high loads, especially when used continuously with heavy vehicles, putting a large strain on the brakes. They pads are recommended for high-powered vehicles driving on circuits, where increased braking performance is desired. The material provides excellent control and stable braking force, enough to be used in the WRC. They also feature excellent release control with a moderate pedal stroke and a tactile feel. - Circuit driving for heavy vehicles weighing approximately 2 tons. - Circuit driving for high-powered vehicles. | $ 142.99 |
![]() | ENDLESS CC60 (N30C) (Brake Pads) -EP382CC60 | |
| Circuit Compound (Rally Use). Semi metallic. 150~800°C. Average friction coefficient: 0.50~0.60. | $ 142.99 |
![]() | ENDLESS MX72 (Brake Pads) -EP382MX72 | |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 127.87 |
![]() | ENDLESS MX72 PLUS (Brake Pads) -EP382MXPL | |
| Street~circuit use. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~750°C. Average friction coefficient: 0.39~0.47. | $ 137.95 |
![]() | ENDLESS NEW Type R (Brake Pads) -EP382TRN | |
| Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | DISCONTINUED |
![]() | ENDLESS NS97 (Brake Pads) -EP382NS97 | |
| Street. Low steel (non-asbestos). 0~500°C. Average friction coefficient: 0.37~0.43. | DISCONTINUED |
![]() | ENDLESS SNP (Brake Pads) -EP382SNP | |
| Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
![]() | ENDLESS SR01 (Brake Pads) -EP382SR01 | |
| Sports pad with excellent controllability that is suitable for everything from city riding to driving events. Braking power from the moment you start driving. Street~circuit use. Material: Low steel. Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.35~0.40. | $ 117.79 |
![]() | ENDLESS SSM (Brake Pads) -EP382SSM | |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | DISCONTINUED |
![]() | ENDLESS SSM PLUS (Brake Pads) -EP382MP | |
| Super Street M-Sports PLUS. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~550°C. Average friction coefficient: 0.33~0.40. | $ 122.83 |
![]() | ENDLESS SSS (Brake Pads) -EP382SS2 | |
| Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 82.52 |
![]() | ENDLESS SSY (Brake Pads) -EP382SY2 | |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
![]() | ENDLESS Type R (Brake Pads) -EP382TR | |
| Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
![]() | ENDLESS W-003 (Brake Pads) -EP382W003 | |
| Circuit. Ceramic Carbon Metal. 200~850°C. Average friction coefficient: 0.40~0.45. | $ 215.43 |
![]() | ENDLESS System Inch Up Kit (super micro 6) More Info (Brake Upgrade Kits) -ECZ3XNCP10 (Old: EC3XNCP10) | |
| Compact 6POT caliper kit for kei class and compact cars. 2 x Caliper (Alumite blue), 2 x Stay, 2 x Brake hose, 2 x Brake rotor (Curving Slit), 1 x Brake pad (Set - Left and right, SSM PLUS/SR01/MX72/MX72 PLUS*). * Other brake pad compounds available, please specify if required (additional cost). | $ 1434.91 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | |
| Performance damper unit only. | DISCONTINUED |
![]() | CUSCO Lower Arm Bar Version II (Chassis Bars) -114 477 A | |
| $ 96.06 |
![]() | TANABE SUSTEC Under Brace (Chassis Bars) -UBT4 | |
| DISCONTINUED |
![]() | CUSCO Compact S More Info (Coilover Kits) -114 60G A | |
| DISCONTINUED |
![]() | CUSCO Compact Zero-1 More Info (Coilover Kits) -114 60H CN | |
| DISCONTINUED |
![]() | CUSCO Street More Info (Coilover Kits) -134 62K CBF | |
| Provides lower ride height while maintaining comfort in daily driven applications. Entry level street system for the budget conscious. Low compression twin-tube shock absorber with redesigned base valve. Precision cut shock case thread with special coating. Quiet operation. Fixed damper front, 14 way rear adjustable shocks (8 way with some models). For use with standard upper mounts. | $ 627.50 |
![]() | CUSCO Street Zero More Info (Coilover Kits) -134 62P CNF | |
| Low compression twin-tube shock absorber with redesigned base valve. Full height adjustable structure & fixed damper set at most ideal rate (8 way rear adjustable shocks included with some models). Precision cut shock case thread with special coating. Quiet operation. Ribbed lower bracket made with specific metal according to each vehicle. Custom spring rates available at no extra cost. | $ 891.75 |
![]() | TRD Suspension Kit for Circuit (Coilover Kits) -48000-NP110 | |
| DISCONTINUED |
![]() | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | |
|   | $ 12.60 |
![]() | PROVA Resevoir Tank Cover (Other) -90000JL0200 | |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
![]() | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | |
| Mechanical lifter kit. | DISCONTINUED |
![]() | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
![]() | MOONFACE Super Lap Bump Adjust Tie Rod Ends (Rods and Control Arms) -STE01 | |
| DISCONTINUED |
![]() | RS-R RS-R Down Suspension Coil (Springs) -T330D | |
$ 149.29 |
![]() | RS-R Ti2000 Suspension Coil (Springs) -T330TD | |
| Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. | $ 220.91 |
![]() | TRUST GReddy BL Comfort Down Spring (Springs) -14011303 TYG003 | |
| BL Comfort Springs produces an attractive style with a moderate drop in ride height while maintaining a comfortable ride. Designed for safe and calm handling characteristics even with the lowered ride height. Vanadium is mixed as metal additive in order to be durable for hard repetition of extension and compression during sports driving. The springs maintain high strain and high heat resistance and is durable against sag, maintaining stable performance. Different from springs designed only for low ride height, TRUST GReddy pursued the ideal design as a tuning parts maker. Total balance was considered while using the standard genuine shock absorber, calculate preload and it ensures stable traction when cornering. BL Comfort Spring is considered rebound performance conspicuous, and simultaneously enables comfortable ride, spring rate is suitable 10-20% up than standard genuine spring. Black coated, double shot peened. | $ 131.65 |
![]() | CUSCO Strut Tower Bar Type 40 (Strut Tower Bars) -114 570 A | |
| 40mm Aluminium shaft. Center Bar: Engineered inside and out, the stylish 40mm cross section made of lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex. Brackets: The aluminum end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | $ 111.18 |
![]() | CUSCO Strut Tower Bar Type ALC OS (Strut Tower Bars) -114 535 A | |
| Oval Aluminium-Carbon shaft. Center Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring. Plates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk. Types: Two center bar types are available, specifically set per application. | $ 111.18 |
![]() | CUSCO Strut Tower Bar Type AS (Strut Tower Bars) -114 510 A | |
| Aluminum Circular Shaft. Center Bar: The most simple and lightweight aluminum shaft bar made hollow for lightweight and rigid characteristics. Brackets: The steel end plate brakets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. | $ 67.08 |
![]() | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -114 540 A | |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 79.18 |
![]() | TANABE SUSTEC Quick Release Lever (Strut Tower Bars) -QRL1 | |
| Optional part for use with TANABE SUSTEC Strut Tower Bars. Allows for smooth removal and installation of the tower bar without tools. The fixing screws between the bar and bracket have been changed to lever bolts. Easy removal increases the usability of the trunk/access to engine. Requires one per side (two required if installing on both sides). | $ 21.89 |
![]() | TANABE SUSTEC Strut Tower Bar (Strut Tower Bars) -NST33 | |
| $ 108.66 |
![]() | TRD Sportivo Front Upper Support (Suspension Kits) -48609-NP101 x 2 | |
| DISCONTINUED |
![]() | TRD Sportivo Rear Suspension Arm Seat (Suspension Kits) -48726-NP100 x 2 | |
| $ 11.78 |
![]() | TRD Sportivo Shock Absorber (Suspension Kits) -48510-NP170 x 2 | |
| DISCONTINUED |
![]() | TRD Sportivo Shock Absorber Set (Suspension Kits) -48030-NP100 | |
| DISCONTINUED |
![]() | TRD Sportivo Spring Set (Suspension Kits) -48130-NP100 | |
| DISCONTINUED |
![]() | TRD Sportivo Suspension Full Set (Suspension Kits) -48030-NP100 + 48130-NP100 | |
| DISCONTINUED |
![]() | CUSCO Pillow Ball Upper Mounts (Upper Mounts) -114 410 A | |
| These upper mounts replace the flimsy factory rubber for a more solid and direct road surface input to the driver as well as keeping alignment specs to the static position during hard cornering. The solid state of the mounts translates the road irregularities to be fully absorbed by the suspension rather than rubber components. This enables improved steering control of the vehicle. CUSCO offers several types of mounts, (camber adjust, fixed, center lock, gravel spec) depending on your vehicle application. All mounts use 6mm thick 2017S duralumin plates. Made to cater to many different types of shock absorbers with a full line of custom pillow nuts and collars. Sold in pairs (Left and right). | $ 171.65 |
![]() | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
![]() | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
![]() | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
![]() | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | |
| $ 218.89 |
![]() | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | |
| DISCONTINUED |
![]() | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
![]() | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
![]() | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
![]() | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
![]() | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
![]() | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | |
| DISCONTINUED |
![]() | WORK Lock Nut Set (Wheel Nuts) -240254 | |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
![]() | WORK RS Nut (Wheel Nuts) -240007 | |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
![]() | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | |
| $ 28.47 |
![]() | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | |
| $ 27.46 |
![]() | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | |
| $ 38.55 |
![]() | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
![]() | Garage Vary Universal Turbulator (Other) -30-4001 | |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
![]() | KENSTYLE Accent Screws (Other) -(GL)AS01 | |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
![]() | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
![]() | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
![]() | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | |
| Universal. Pair (Left and right). | $ 95.05 |
![]() | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | |
| Universal. Pair (Left and right). | $ 149.29 |
![]() | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | |
| Universal. Pair (Left and right). | DISCONTINUED |
![]() | SARD Aero Blade (Exterior Parts) -61967 | |
| Sold individually (1 piece). | $ 20.31 |
![]() | SARD Front Bumper Canard (Exterior Parts) -61965 | |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
![]() | SARD Front Under Flap (Exterior Parts) -61966 | |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
![]() | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
![]() | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | |
| $ 217.69 |
![]() | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | |
| Gas/Petrol cap cover. | DISCONTINUED |
![]() | Blitz i-Burner Expansion Kit (Globes) -14566 | |
| DISCONTINUED |
![]() | Blitz i-Burner Spark Lights (Globes) -14565 | |
| DISCONTINUED |
![]() | HKS Billet Oil Filler Cap (Oil Filler Caps) -24003-AT002 | |
| Duralumin. | $ 51.15 |
![]() | TRUST GReddy Cable Ties (Other) -18001742 | |
| GReddy logo cable ties. | $ 14.19 |
![]() | HKS Emblem (Stickers and Emblems) -51003-AK027 | |
| Silver. 87 x 35mm. | DISCONTINUED |
![]() | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
![]() | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | |
| ABS resin emblem of Tuned by HKS. Size:115mm x 19mm. | $ 28.22 |
![]() | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
![]() | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
![]() | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
![]() | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
![]() | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
![]() | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | |
| HKS logo on oil color. | $ 12.35 |
![]() | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
![]() | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
![]() | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | |
| Small-sized transcription sticker. | $ 12.35 |
![]() | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
![]() | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | |
| High brightness reflective sheet. | $ 24.76 |
![]() | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
![]() | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
![]() | TOMEI 70 Sticker (Stickers and Emblems) -761031 | |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
![]() | TOMEI Emblem (Stickers and Emblems) -763000 | |
| 120 x 22mm. | $ 19.65 |
![]() | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
![]() | Top Fuel Emblem (Stickers and Emblems) -26735831 | |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
![]() | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | |
| DISCONTINUED |
![]() | Blitz Towing Strap (Tow Hooks/Straps) -13890 | |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
![]() | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
![]() | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | |
| $ 41.04 |
![]() | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
![]() | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
![]() | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | |
| Set of 4. | $ 19.84 |
![]() | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
![]() | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
![]() | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
![]() | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
![]() | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
Back | Back to TOP