|
|
|
Intake...
- Air Filters...
- Blow Off Valves
- Piping
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Specials
| Categories: | |
Electronic Parts
 | TRUST GReddy Profec -15500214 (Boost Controllers) |  ITEM DETAILS |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
 | Blitz Power Thro -BPT41 (Other Controllers) | ITEM DETAILS |
| Throttle controller and power increase! Boost (turbo vehicles) or airflow sensor signal (naturally aspirated vehicles) is controlled and optimised with throttle angle by Blitz's proprietary technology . Economy, sports, auto and smart throttle modes (total 25 modes) to fine tune throttle control to your driving style. In addition to the 25 modes, when used with the optional Scramble Switch (Sold separately), scramble mode can be accessed. When used with the optional harness (Sold separately), the Start Control System (SCS) function can be used. This features retains settings of the factory idling stop feature(on/off), and the SI Drive/Drive mode. Built in safety features which reverts to standard circuit should there be any fault. Designed for use with standard air cleaner or Blitz Air Filter/Air Cleaner Series. Kit is inclusive of Power Thro unit, Thro Con unit, controller and vehicle specific harness(s) (may not be not pictured). 31.7PS power increase. 43.1Nm torque increase. | $ 354.76 |
Interior Parts
 | TRUST GReddy x Works Bell Rapfix II -70723802 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Black body, black sleeve. Height: 61mm. | $ 238.17 |
 | TRUST GReddy x Works Bell Rapfix II -70723801 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Blue body, black sleeve. Height: 61mm. | $ 238.17 |
 | Works Bell Rapfix II Security Kit -103130 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
 | Works Bell Rapfix Racing -103332 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system for competition cars. Attachment type: PCD 50.8mm, three holes. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 227.39 |
 | Works Bell Rapfix Racing -103330 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system for competition cars. Attachment type: Weld. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 208.50 |
 | Works Bell Rapfix GTC -103280 (Boss Kits) | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Black. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 245.09 |
| Works Bell Rapfix GTC -103270 (Boss Kits) | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Silver. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 245.09 |
| Works Bell Rapfix II Security Kit -103151 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103120 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103100 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103154 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Orange body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103152 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103110 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103150 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Red body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
 | Works Bell Rapfix II -103060 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Orange body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103040 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Blue body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103020 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Black body, black sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103010 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Silver body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103030 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Red body, silver sleeve. Height: 61mm. | $ 203.21 |
 | Mine's D-S Steering -(GL)INSW-MNW-GEN-01 (Steering Wheels) | ITEM DETAILS |
| D shape steering wheel. Buck Skin. Black stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 453.53 |
 | Mine's R-S Steering -(GL)INSW-MNW-GEN-04 (Steering Wheels) | ITEM DETAILS |
| Round shape steering wheel. Leather and alcantara. Red stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 579.51 |
 | Mine's R-S Steering -(GL)INSW-MNW-GEN-03 (Steering Wheels) | ITEM DETAILS |
| Round shape steering wheel. Buck Skin. Black stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 535.42 |
 | Mine's D-S Steering -IT-SW-F-9N (Steering Wheels) | ITEM DETAILS |
| D shape steering wheel. Leather and alcantara. Red stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 579.51 |
Cooling Parts
 | TRUST Transmission/Differential Oil Cooler Kit -12004811 (Differential Oil Coolers) | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 524.71 |
| TRUST Transmission/Differential Oil Cooler Kit -12004811 (Transmission Oil Coolers) | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 524.71 |
Engine Parts
 | SARD Fuel Regulator Standard -69010 G (Fuel Regulators) | ITEM DETAILS |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. 8mm nipple type. Gold. Discontinued item - limited stock available. | $ 81.89 |
 | SARD Fuel Collector Tank -58264 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| 5.0L. AN#6 fittings. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 368.49 |
| SARD Fuel Collector Tank -58284 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| 5.0L. 8mm fittings. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 368.49 |
 | SARD Fuel Collector Tank -58260 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| L. AN#6 fittings. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 243.77 |
| SARD Fuel Collector Tank -58280 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| L. 8mm fittings. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 243.77 |
 | TRUST GReddy Titanium Turbo Blanket -11900537 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For TD05/TD06/T67. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 112.94 |
| TRUST GReddy Titanium Turbo Blanket -11900538 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For T78/88/88H. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 119.37 |
 | TRUST GReddy Oil Catch Tank Short -13500611 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
| TRUST GReddy Oil Catch Tank Short -13500612 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
| TRUST GReddy Oil Catch Tank Short -13500613 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
 | TRUST GReddy Oil Catch Tank 1000 -13500601 (Old: 13500509) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
| TRUST GReddy Oil Catch Tank 1000 -13500602 (Old: 13500515) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
| TRUST GReddy Oil Catch Tank 1000 -13500603 (Old: 13500516) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
Drivetrain Parts
 | ATS Carbon Clutch (Triple Plate) More Info -CH233130-11 (Clutches) | ITEM DETAILS |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. Spec 1. 1,100kgf/m. Includes clutch bearing and sleeve. | $ 2964.94 |
| ATS Carbon Clutch (Triple Plate) More Info -CH233130-14 (Clutches) | ITEM DETAILS |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. Spec 1. 1,350kgf/m. Includes clutch bearing and sleeve. | $ 2964.94 |
 | ATS Carbon Clutch (Twin Plate) More Info -CH232130-11 (Clutches) | ITEM DETAILS |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. Spec 1. 1,100kgf/m. Includes clutch bearing and sleeve. | $ 2501.33 |
| ATS Carbon Clutch (Twin Plate) More Info -CH232130-14 (Clutches) | ITEM DETAILS |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. Spec 1. 1,350kgf/m. Includes clutch bearing and sleeve. | $ 2501.33 |
| ATS Carbon Clutch (Triple Plate) More Info -CH23H3130-14S (Clutches) | ITEM DETAILS |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. Spec 2 (Light Pedal). 1,350kgf/m. Includes clutch bearing and sleeve. | $ 2964.94 |
| ATS Carbon Clutch (Twin Plate) More Info -CH23H2130-14S (Clutches) | ITEM DETAILS |
| ATS carbon clutch featuring super light and heat resistant characteristics of CC composite provides drivers truly exceptional strength, response, and durability. ATS carbon clutches are very well known in the world for their unsurpassed torque delivery, durability, smoothness to drive, while being forgiving to transmissions. Spec 2 (Light Pedal). 1,350kgf/m. Includes clutch bearing and sleeve. | $ 2501.33 |
 | CUSCO LSD Type RS More Info -LSD 3A9 F (Differentials) | ITEM DETAILS |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. 1 way. Manual transmission models. | $ 705.49 |
| CUSCO LSD Type RS More Info -LSD 3A9 C (Differentials) | ITEM DETAILS |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. 1 way (1 & 1.5 way switchable). Manual transmission models. | $ 705.49 |
| CUSCO LSD Type RS More Info -LSD 3A9 C15 (Differentials) | ITEM DETAILS |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. 1.5 way (1 & 1.5 way switchable). Manual transmission models. | $ 705.49 |
 | CUSCO LSD Type RS Spec F More Info -LSD 3A9 FT (Differentials) | ITEM DETAILS |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. 1 way. Manual transmission models. | $ 705.49 |
| CUSCO LSD Type RS Spec F More Info -LSD 3A9 CT (Differentials) | ITEM DETAILS |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. 1 way (1 & 1.5 way switchable). Manual transmission models. | $ 705.49 |
| CUSCO LSD Type RS Spec F More Info -LSD 3A9 CT15 (Differentials) | ITEM DETAILS |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. 1.5 way (1 & 1.5 way switchable). Manual transmission models. | $ 705.49 |
 | SPOON SPORTS Drive Shaft Set -42300-FL5-C00 (Driveshafts) | ITEM DETAILS |
| The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure. The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances. This ensures a smooth power delivery and reliable service. | $ 1396.17 |
Suspension Parts
 | CUSCO Stabiliser Bar More Info -3F7 311 A30 (Anti Roll (Sway/Stabiliser) Bars) | ITEM DETAILS |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. Front. 30mm (Std: 29.2mm). Not adjustable. Includes bushes. | $ 196.84 |
 | CUSCO Stabiliser Bar More Info -3C4 311 B22 (Anti Roll (Sway/Stabiliser) Bars) | ITEM DETAILS |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. Rear. 22mm (Std: 20mm). Not adjustable. Includes brackets and bushes. | $ 181.73 |
 | DIXCEL Specom Beta More Info -BE 341225 (Brake Pads) | ITEM DETAILS |
| Racing compound as used in Super Taikyu (Endurance) racing. Consistent pedal touch and control over long operation periods providing driver with confindence. Carbon semi metallic material. Initialμ: 0.48, Averageμ: 0.40~0.43. Front. | $ 230.92 |
| DIXCEL Specom Beta More Info -BE 335161 (Brake Pads) | ITEM DETAILS |
| Racing compound as used in Super Taikyu (Endurance) racing. Consistent pedal touch and control over long operation periods providing driver with confindence. Carbon semi metallic material. Initialμ: 0.48, Averageμ: 0.40~0.43. Rear. | $ 230.92 |
 | ENDLESS CC-Rg -EP357CRG2 (Brake Pads) | ITEM DETAILS |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. Front. | $ 148.03 |
| ENDLESS CC-Rg -EP524CRG2 (Brake Pads) | ITEM DETAILS |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. Rear. | $ 121.57 |
| ENDLESS CC-Rg -CRG2357524 (EP357CRG2 + EP524CRG2) (Brake Pads) | ITEM DETAILS |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. Front and rear set. | $ 204.72 |
 | RS-R Ti2000 Suspension Coil -H034TD (Springs) | ITEM DETAILS |
| Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. Front (5.61kg/mm, -25~-20mm) and rear (5.31kg/mm, -30~-25mm). | $ 308.65 |
 | RS-R RS-R Down Suspension Coil -H034D (Springs) | ITEM DETAILS |
| Front (5.61kg/mm, -25~-20mm) and rear (5.31kg/mm, -30~-25mm). | $ 207.87 |
 | CUSCO Strut Tower Bar Type OS -3F7 540 A (Strut Tower Bars) | ITEM DETAILS |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. Front. | $ 95.43 |
Other Parts
 | ORIGIN Front EX Canard -W037-SET-carbon (Exterior Parts) | ITEM DETAILS |
| Universal. Pair (Left and right). Carbon. W75 x D375. | $ 106.45 |
 | Monster Sport Chrome Emblem -ZZZE32 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. Pin type (Pin length: 14mm). Includes push nuts and bracket. | $ 23.56 |
 | Monster Sport Chrome Emblem -ZZZE37 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. No pin type. Includes double sided tape. | $ 23.56 |
| Monster Sport Chrome Emblem -ZZZE42 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. Pin type (Pin length: 17mm). Includes push nuts and bracket. | $ 26.55 |
| Monster Sport Chrome Emblem -ZZZE47 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. No pin type. Includes double sided tape. | $ 26.55 |
 | Monster Sport Door Reflection Sticker -896119-0000M (Stickers and Emblems) | ITEM DETAILS |
| High brightness reflective sheet. Set of 4 (2 x Large, 2 x Small). Large: H28 x W110 mm. Small: H20 x W90 mm. | $ 24.76 |
Back | Back to TOPCan't find a part or not listed for your model?
Email: [email protected]
Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.
|
Customer Services Contact Us Purchasing Information International Shipping Payment Methods Currency Conversion |
Don't Miss Out Mailing List Specials Product Catalogue |
About Greenline About Greenline |
We specialise in shipping internationally!
And offer local delivery by special arrangement.
© Greenline Motorsports, 2002-2026 Terms and Conditions, Privacy Policy
A Gosaru Solution
