|
|
|
Intake...
- Air Filters...
- Blow Off Valves
- Piping
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Specials
| Categories: | |
Electronic Parts
 | TRUST GReddy Profec -15500214 (Boost Controllers) |  ITEM DETAILS |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
Interior Parts
 | TRUST GReddy x Works Bell Rapfix II -70723802 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Black body, black sleeve. Height: 61mm. | $ 238.17 |
 | TRUST GReddy x Works Bell Rapfix II -70723801 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Blue body, black sleeve. Height: 61mm. | $ 238.17 |
 | Works Bell Rapfix II Security Kit -103130 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
 | Works Bell Rapfix Racing -103332 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system for competition cars. Attachment type: PCD 50.8mm, three holes. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 227.39 |
 | Works Bell Rapfix Racing -103330 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system for competition cars. Attachment type: Weld. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 208.50 |
 | Works Bell Rapfix GTC -103280 (Boss Kits) | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Black. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 245.09 |
| Works Bell Rapfix GTC -103270 (Boss Kits) | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Silver. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 245.09 |
| Works Bell Rapfix II Security Kit -103151 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103120 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103100 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103154 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Orange body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103152 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103110 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103150 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Red body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
 | Works Bell Rapfix II -103060 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Orange body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103040 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Blue body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103020 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Black body, black sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103010 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Silver body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103030 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Red body, silver sleeve. Height: 61mm. | $ 203.21 |
 | Mine's D-S Steering -(GL)INSW-MNW-GEN-01 (Steering Wheels) | ITEM DETAILS |
| D shape steering wheel. Buck Skin. Black stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 453.53 |
 | Mine's R-S Steering -(GL)INSW-MNW-GEN-04 (Steering Wheels) | ITEM DETAILS |
| Round shape steering wheel. Leather and alcantara. Red stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 579.51 |
 | Mine's R-S Steering -(GL)INSW-MNW-GEN-03 (Steering Wheels) | ITEM DETAILS |
| Round shape steering wheel. Buck Skin. Black stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 535.42 |
 | Mine's D-S Steering -IT-SW-F-9N (Steering Wheels) | ITEM DETAILS |
| D shape steering wheel. Leather and alcantara. Red stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 579.51 |
Intake Parts
 | Apex APEXi Power Intake Kit More Info -507-T018 (Air Filters) | ITEM DETAILS |
| Air filter with minimal air-flow restriction. Dual funnel filter system minimizes intake turbulence. Vehicle specific kits include adapters and other fitting parts. The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spotsb within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is touble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. 2002/09~2007/06. | $ 221.09 |
Cooling Parts
 | TRUST Transmission/Differential Oil Cooler Kit -12004811 (Differential Oil Coolers) | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 524.71 |
| TRUST Transmission/Differential Oil Cooler Kit -12004811 (Transmission Oil Coolers) | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 524.71 |
Engine Parts
 | SARD Fuel Regulator Standard -69010 G (Fuel Regulators) | ITEM DETAILS |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. 8mm nipple type. Gold. Discontinued item - limited stock available. | $ 81.89 |
 | SARD Fuel Collector Tank -58264 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| 5.0L. AN#6 fittings. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 368.49 |
| SARD Fuel Collector Tank -58284 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| 5.0L. 8mm fittings. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 368.49 |
 | SARD Fuel Collector Tank -58260 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| L. AN#6 fittings. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 243.77 |
| SARD Fuel Collector Tank -58280 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| L. 8mm fittings. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 243.77 |
 | TRUST GReddy Titanium Turbo Blanket -11900537 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For TD05/TD06/T67. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 112.94 |
| TRUST GReddy Titanium Turbo Blanket -11900538 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For T78/88/88H. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 119.37 |
 | TRUST GReddy Oil Catch Tank Short -13500611 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
| TRUST GReddy Oil Catch Tank Short -13500612 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
| TRUST GReddy Oil Catch Tank Short -13500613 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
 | TRUST GReddy Oil Catch Tank 1000 -13500601 (Old: 13500509) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
| TRUST GReddy Oil Catch Tank 1000 -13500602 (Old: 13500515) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
| TRUST GReddy Oil Catch Tank 1000 -13500603 (Old: 13500516) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
Other Parts
 | ORIGIN Front EX Canard -W037-SET-carbon (Exterior Parts) | ITEM DETAILS |
| Universal. Pair (Left and right). Carbon. W75 x D375. | $ 106.45 |
 | Monster Sport Chrome Emblem -ZZZE32 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. Pin type (Pin length: 14mm). Includes push nuts and bracket. | $ 23.56 |
 | Monster Sport Chrome Emblem -ZZZE37 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. No pin type. Includes double sided tape. | $ 23.56 |
| Monster Sport Chrome Emblem -ZZZE42 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. Pin type (Pin length: 17mm). Includes push nuts and bracket. | $ 26.55 |
| Monster Sport Chrome Emblem -ZZZE47 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. No pin type. Includes double sided tape. | $ 26.55 |
 | Monster Sport Door Reflection Sticker -896119-0000M (Stickers and Emblems) | ITEM DETAILS |
| High brightness reflective sheet. Set of 4 (2 x Large, 2 x Small). Large: H28 x W110 mm. Small: H20 x W90 mm. | $ 24.76 |
Back | Back to TOPCan't find a part or not listed for your model?
Email: [email protected]
Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.
|
Customer Services Contact Us Purchasing Information International Shipping Payment Methods Currency Conversion |
Don't Miss Out Mailing List Specials Product Catalogue |
About Greenline About Greenline |
We specialise in shipping internationally!
And offer local delivery by special arrangement.
© Greenline Motorsports, 2002-2026 Terms and Conditions, Privacy Policy
A Gosaru Solution
