|
|
|
Intake...
- Air Filters...
- Blow Off Valves
- Piping
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Specials
| Categories: | |
Electronic Parts
 | TRUST GReddy Profec -15500214 (Boost Controllers) |  ITEM DETAILS |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
 | Blitz Power Thro -BPT02 (Other Controllers) | ITEM DETAILS |
| Throttle controller and power increase! Boost (turbo vehicles) or airflow sensor signal (naturally aspirated vehicles) is controlled and optimised with throttle angle by Blitz's proprietary technology . Economy, sports, auto and smart throttle modes (total 25 modes) to fine tune throttle control to your driving style. In addition to the 25 modes, when used with the optional Scramble Switch (Sold separately), scramble mode can be accessed. When used with the optional harness (Sold separately), the Start Control System (SCS) function can be used. This features retains settings of the factory idling stop feature(on/off), and the SI Drive/Drive mode. Built in safety features which reverts to standard circuit should there be any fault. Designed for use with standard air cleaner or Blitz Air Filter/Air Cleaner Series. Kit is inclusive of Power Thro unit, Thro Con unit, controller and vehicle specific harness(s) (may not be not pictured). 24.3PS power increase. | $ 277.16 |
Interior Parts
 | TRUST GReddy x Works Bell Rapfix II -70723802 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Black body, black sleeve. Height: 61mm. | $ 238.17 |
 | TRUST GReddy x Works Bell Rapfix II -70723801 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Blue body, black sleeve. Height: 61mm. | $ 238.17 |
 | Works Bell Rapfix II Security Kit -103150 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Red body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
 | Works Bell Rapfix Racing -103332 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system for competition cars. Attachment type: PCD 50.8mm, three holes. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 227.39 |
 | Works Bell Rapfix Racing -103330 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system for competition cars. Attachment type: Weld. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 208.50 |
 | Works Bell Rapfix GTC -103280 (Boss Kits) | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Black. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 245.09 |
| Works Bell Rapfix GTC -103270 (Boss Kits) | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Silver. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 245.09 |
| Works Bell Rapfix II Security Kit -103151 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103120 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103100 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Red. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103154 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Orange body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103152 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103130 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
| Works Bell Rapfix II Security Kit -103110 (Boss Kits) | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Silver. Discontinued. | $ 231.87 |
 | Works Bell Rapfix II -103060 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Orange body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103040 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Blue body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103020 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Black body, black sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103010 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Silver body, silver sleeve. Height: 61mm. | $ 203.21 |
| Works Bell Rapfix II -103030 (Boss Kits) | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Red body, silver sleeve. Height: 61mm. | $ 203.21 |
 | KENSTYLE Steering -SB01 (Steering Wheels) | ITEM DETAILS |
| Sporty gun grip and D shape design steering wheel. Napa leather. Red stitch. Subaru B Type. W370mm x H355mm. Suitable for use with standard airbag, switch and horn unit (Not included). Also suitable for use with standard option steering shift switches (Not included). | $ 349.91 |
 | KENSTYLE Steering -SB06 (Steering Wheels) | ITEM DETAILS |
| Sporty gun grip and D shape design steering wheel. Standard leather. Silver stitch. Subaru B Type. W370mm x H355mm. Suitable for use with standard airbag, switch and horn unit (Not included). Also suitable for use with standard option steering shift switches (Not included). Napa leather version pictured. | $ 294.48 |
 | KENSTYLE Steering -SB05 (Steering Wheels) | ITEM DETAILS |
| Sporty gun grip and D shape design steering wheel. Standard leather. Blue stitch. Subaru B Type. W370mm x H355mm. Suitable for use with standard airbag, switch and horn unit (Not included). Also suitable for use with standard option steering shift switches (Not included). Napa leather version pictured. | $ 294.48 |
| KENSTYLE Steering -SB03 (Steering Wheels) | ITEM DETAILS |
| Sporty gun grip and D shape design steering wheel. Napa leather. Silver stitch. Subaru B Type. W370mm x H355mm. Suitable for use with standard airbag, switch and horn unit (Not included). Also suitable for use with standard option steering shift switches (Not included). | $ 349.91 |
| KENSTYLE Steering -SB02 (Steering Wheels) | ITEM DETAILS |
| Sporty gun grip and D shape design steering wheel. Napa leather. Blue stitch. Subaru B Type. W370mm x H355mm. Suitable for use with standard airbag, switch and horn unit (Not included). Also suitable for use with standard option steering shift switches (Not included). | $ 349.91 |
 | Mine's R-S Steering -(GL)INSW-MNW-GEN-04 (Steering Wheels) | ITEM DETAILS |
| Round shape steering wheel. Leather and alcantara. Red stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 579.51 |
 | Mine's R-S Steering -(GL)INSW-MNW-GEN-03 (Steering Wheels) | ITEM DETAILS |
| Round shape steering wheel. Buck Skin. Black stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 535.42 |
 | Mine's D-S Steering -IT-SW-F-9N (Steering Wheels) | ITEM DETAILS |
| D shape steering wheel. Leather and alcantara. Red stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 579.51 |
 | Mine's D-S Steering -(GL)INSW-MNW-GEN-01 (Steering Wheels) | ITEM DETAILS |
| D shape steering wheel. Buck Skin. Black stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 453.53 |
Intake Parts
 | Blitz SUS Power Air Cleaner More Info -26224 (Air Filters) | ITEM DETAILS |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. C2. | $ 193.57 |
 | Coto Sports TC Blow Off Valve -BOV-S07 (Blow Off Valves and Kits) | ITEM DETAILS |
| Heavy duty standard replacement blow off valve. Increased valve opening pressure results in response of the turbo is increased significantly, boost starting lower in the rpm range. As a result, the medium and low speed torque is increased. Being replacement of the standard blow off unit, engine stall/idling are not an issue. | $ 98.33 |
 | TOMEI Titanium Intake Pipe -451009 (Piping) | ITEM DETAILS |
| Stock rubber hose is not suitable for high temperatures and boost pressures that the engine is capable of when pushed for performance. The piping will deform and hinder the air flow to the engines intake. The TOMEI Titanium intake pipe eliminates the deformation problem, while preventing loss of boost pressure. Along with the increased performance gains, being made from titanium, the pipe is also lighter than the stock item. Intake pipe (50.5 -> 70mm), silicone hoses and hose bands. | $ 317.47 |
 | TOMEI Titanium Turbo Suction Pipe -451010 (Piping) | ITEM DETAILS |
| Increases the performance by eliminating the intake air resistance of the standard hose. Intake pipe (50.5 -> 70mm), silicone hoses and hose bands. | $ 169.13 |
Cooling Parts
 | TRUST Transmission/Differential Oil Cooler Kit -12004811 (Differential Oil Coolers) | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 524.71 |
 | Zero Sports Cool Action II -0306046 (Ducts and Ducting) | ITEM DETAILS |
| When the intake air temperature is high, the expansion coefficient of air increases, making it impossible to create an ideal combustion environment, which leads directly to less power. Therefore turbo cars are equipped with an intercooler to cool the intake air. However, if the intercooler core only receives half the incoming air, its performance will greatly reduced. Zero Sports developed Cool Action II for the purpose of fully exploiting the performance of the intercooler. The air flowing from the hood duct (front bonnet duct) is guided evenly over the entire intercooler core. As a result, intake air temp is lowered, bringing it closer to the ideal combustion environment, so that bringing out engine performance. Blue. | $ 262.73 |
 | Zero Sports Cool Action II -0306047 (Ducts and Ducting) | ITEM DETAILS |
| When the intake air temperature is high, the expansion coefficient of air increases, making it impossible to create an ideal combustion environment, which leads directly to less power. Therefore turbo cars are equipped with an intercooler to cool the intake air. However, if the intercooler core only receives half the incoming air, its performance will greatly reduced. Zero Sports developed Cool Action II for the purpose of fully exploiting the performance of the intercooler. The air flowing from the hood duct (front bonnet duct) is guided evenly over the entire intercooler core. As a result, intake air temp is lowered, bringing it closer to the ideal combustion environment, so that bringing out engine performance. Red. | $ 262.73 |
 | Zero Sports Cool Air Intake -0307127 (Ducts and Ducting) | ITEM DETAILS |
| Blue. | $ 262.73 |
 | Zero Sports Cool Air Intake -0307128 (Ducts and Ducting) | ITEM DETAILS |
| Red. | $ 262.73 |
 | HKS Radiator Cap More Info -15009-AK004 (Radiator Caps) | ITEM DETAILS |
| Silicone rubber seal improves sealing properties. This radiator cap can support the reliable cooling performance under severe driving conditions. S Type. Valve opening pressure 1.1kgf/cm2 (108kPa). | $ 19.72 |
| HKS Radiator Cap More Info -15009-AK006 (Radiator Caps) | ITEM DETAILS |
| Silicone rubber seal improves sealing properties. This radiator cap can support the reliable cooling performance under severe driving conditions. S Type. Valve opening pressure 0.9kgf/cm2 (88kPa). | $ 19.72 |
| TRUST Transmission/Differential Oil Cooler Kit -12004811 (Transmission Oil Coolers) | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 524.71 |
Engine Parts
 | SARD Fuel Regulator Standard -69010 G (Fuel Regulators) | ITEM DETAILS |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. 8mm nipple type. Gold. Discontinued item - limited stock available. | $ 81.89 |
 | SARD Fuel Collector Tank -58264 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| 5.0L. AN#6 fittings. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 368.49 |
| SARD Fuel Collector Tank -58284 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| 5.0L. 8mm fittings. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 368.49 |
 | SARD Fuel Collector Tank -58260 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| L. AN#6 fittings. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 243.77 |
| SARD Fuel Collector Tank -58280 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS |
| L. 8mm fittings. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. | $ 243.77 |
 | TRUST GReddy Titanium Turbo Blanket -11900537 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For TD05/TD06/T67. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 112.94 |
| TRUST GReddy Titanium Turbo Blanket -11900538 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For T78/88/88H. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 119.37 |
 | PROVA T-REV DIT -50600BE0000 (SUBARU 02) (Oil Breather Tanks) | ITEM DETAILS |
| Crank case depressurisation device. Improve engine response and drive feel. As used in higher performance race car and race motorcycle engines. | $ 376.68 |
 | TRUST GReddy Oil Catch Tank Short -13500611 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
| TRUST GReddy Oil Catch Tank Short -13500612 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
| TRUST GReddy Oil Catch Tank Short -13500613 (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 680ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 87.24 |
 | TRUST GReddy Oil Catch Tank 1000 -13500601 (Old: 13500509) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
| TRUST GReddy Oil Catch Tank 1000 -13500602 (Old: 13500515) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
| TRUST GReddy Oil Catch Tank 1000 -13500603 (Old: 13500516) (Oil Breather Tanks) | ITEM DETAILS |
| Universal kit. 1000ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.60 |
Drivetrain Parts
 | CUSCO Drive Shaft Heat Shield -6A5 047 F (Driveshafts) | ITEM DETAILS |
| Reduces chances of drive shaft trouble by blocking heat from exhaust, decreasing the effectiveness of the grease inside the inner joint. In the case where the drive shaft boot is broken, grease is less likely to adhere to the exhaust, preventing secondary problems from arising. Front. For use with standard front pipe /catalyzer, or aftermarket with standard layout. Steel plate finish. Bolt on installation. | $ 38.55 |
 | CUSCO Drive Shaft Heat Shield -6A1 047 R (Driveshafts) | ITEM DETAILS |
| Reduces chances of drive shaft trouble by blocking heat from exhaust, decreasing the effectiveness of the grease inside the inner joint. In the case where the drive shaft boot is broken, grease is less likely to adhere to the exhaust, preventing secondary problems from arising. Rear right. For use with standard exhaust, or aftermarket with standard layout. Steel plate finish. Bolt on installation. May require differential oil removal/replenishment for installation. CVT models. A~E models only. Not suitable for F~. | $ 38.55 |
Suspension Parts
 | CUSCO Heavy Duty Brake Pedal Plate -965 486 AN (Brake Cylinder Stoppers) | ITEM DETAILS |
| Brake pedal brace. Improves brake pedal touch and controlability. Plate reinforces the bracket, suppressing deflection at time of braking. Suitable for use in conjunction with CUSCO BCS (Sold separately) for even further brake feel. Bolt on installation. Pictured brake pedal assembly not included. | $ 99.02 |
 | ENDLESS System Inch Up Kit (Levorg 6) More Info -EC5ZVMG (Brake Upgrade Kits) | ITEM DETAILS |
| Levorg specific 6 pot front caliper. Ideally used with Levorg rear calipers (Sold separately) for greater brake balance. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. Front. 332 x 32mm (2 piece). | $ 1972.85 |
| ENDLESS System Inch Up Kit (Levorg 6 GT) More Info -ECIZVMG (Brake Upgrade Kits) | ITEM DETAILS |
| Levorg specific 6 pot front caliper. Ideally used with Levorg rear calipers (Sold separately) for greater brake balance. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. Front. 355 x 32mm (2 piece). | $ 2199.61 |
 | ENDLESS System Inch Up Kit (Levorg Rear Inch Up) More Info -EC8YVMG (Brake Upgrade Kits) | ITEM DETAILS |
| Levorg specific rear brake caliper kit. For use with standard electronic parking brake and caliper body (Not included). Ideally used with Levorg 6 pot front calipers (Sold separately) for greater brake balance. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. Rear. 320 x 17mm (2 piece). | $ 1519.32 |
| ENDLESS System Inch Up Kit (Levorg Rear Inch Up) More Info -EC8ZVMG (Brake Upgrade Kits) | ITEM DETAILS |
| Levorg specific rear brake caliper kit. For use with standard electronic parking brake and caliper body (Not included). Ideally used with Levorg 6 pot front calipers (Sold separately) for greater brake balance. 2 x Caliper, 2 x Stay, 2 x Brake hose, 2 x Brake rotor, 1 x Brake pad. Rear. 332 x 17mm (2 piece). | $ 1595.54 |
 | ENDLESS System Inch Up Kit (F and R Set) More Info -ECDXVMG (Brake Upgrade Kits) | ITEM DETAILS |
| Front and rear set. Levorg 6 & Levorg Rear Inch Up Version 1. F: 332 x 32, R: 320 x 17. Rear for use with standard electronic parking brake and caliper body (Not included). | $ 3288.08 |
| ENDLESS System Inch Up Kit (F and R Set) More Info -ECDYVMG (Brake Upgrade Kits) | ITEM DETAILS |
| Front and rear set. Levorg 6 GT & Levorg Rear Inch Up Version 1. F: 355 x 32, R: 332 x 17. Rear for use with standard electronic parking brake and caliper body (Not included). | $ 3684.92 |
 | Arai Motorsport AMS Response Front Member Brace -FMB001AMS002 (Chassis Bars) | ITEM DETAILS |
$ 167.05 |
 | SYMS COX Body Damper -Y0200VM001 (Chassis Bars) | ITEM DETAILS |
| Setting by SYMS. Front and rear set. Models equipped with STi Rear Under Spoiler (SG517VA310) require Optional Backet (Sold separately). | $ 658.25 |
 | SYMS COX Body Damper Option Bracket -Y0200VM002 (Chassis Bars) | ITEM DETAILS |
| Brackets required for installation of COX Body Damper to models equipped with STi Rear Under Spoiler (SG517VA310). | $ 40.16 |
 | HKS HIPERMAX MAX IV GT 20SPEC -80230-AF007A (Coilover Kits) | ITEM DETAILS |
| Resetting of the HIPERMAX IV GT with the latest technology that balances handling performance and street comfort. It's perfect for daily street drive with style and performance. You and your passenger can have a comfortable ride even when lowered. Single Tube Damper Design Mono tube dampers allow for more accurate and stable control and adjustment of dampening. Lower ride height and centre of gravity gives a more stable ride. Dust Boot Protect the shaft from the flying stones. PNE Coating Using this special surface coating provides 5 times better durability over standard galvanising. This prevents build-up around the threads of the adjustment areas allowing for easier height adjustment. "M Shaft" With the new design of cylinder shaft since the HIPERMAX M-1, MAX IV increased the cylinder shaft size to have a firm damping even at a little stroke range because of the optimized oil pressure characteristic. We mainly adopted this to the rear damper that can have a better driving experience. New Design Needle Newly designed needle has been used to revise the very low speed and middle and high speed dampening which is key to a comfort ride. Reduction of Unsprung Weight In order to reduce unsprung weight, bracket, ride height adjusters and lock nuts are made from aluminium (Not for all vehicles). 30 Step Damping Force Adjustment 30 levels of dampening adjustment allow fine tune adjustment for street or circuit. Spring rate F: 59.0 N/mm (6.0 kgf/mm) R: 59.0 N/mm (6.0 kgf/mm). Rubber type upper mounts. | $ 1060.12 |
 | CUSCO Strut Tower Bar Type OS -6A1 540 A (Strut Tower Bars) | ITEM DETAILS |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. Front. Type 1. | $ 79.18 |
 | CUSCO Strut Tower Bar Type OS -6A5 541 A (Strut Tower Bars) | ITEM DETAILS |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. Rear. Type 1. Requires modifications to the rear trim and floor board. | $ 77.10 |
 | STi Flexible Tower Bar -ST20502VV030 (Strut Tower Bars) | ITEM DETAILS |
| This is a strut tower bar with a completely new concept - splitting an aluminum tower bar in the center and connecting the two pieces with pillow ball joints. As the left and right pieces are flexibly connected, the bar can moderately handle longitudinal forces such as from gaps on the road to maintain ride comfort while strongly holding against lateral forces during cornering. As a result, not only cornering performance but also straight-line stability and ride comfort is improved to enhance the comprehensive performance level of the car. Front. Designed for use in conjunction with STi Flexible Draw Stiffener (Sold separately). As per standard equipment on S207 models. | $ 186.45 |
 | STi Flexible Draw Stiffener -ST20118VV000 (Strut Tower Bars) | ITEM DETAILS |
| Applies moderate tension, to prevent the chassis from bending when you drive the vehicle. Front. Connects vehicle body and cross member. Results in agile and responsive initial steering, as well as a comfortable ride. The vehicle will boast better grip on all four wheels, improved stability when cornering, and also fast and responsive steering performance. Recommended for use in conjunction with STi Flexible Tower Bar (Sold separately). As per standard equipment on S207 models. | $ 183.30 |
 | STi Flexible Support (Sub Frame Rear) -ST20157VV000 (Strut Tower Bars) | ITEM DETAILS |
| Designed for use in conjunction with STi Flexible Draw Stiffener (Sold separately). As per standard equipment on S207 models. | $ 180.47 |
Other Parts
 | ORIGIN Front EX Canard -W037-SET-carbon (Exterior Parts) | ITEM DETAILS |
| Universal. Pair (Left and right). Carbon. W75 x D375. | $ 106.45 |
 | Monster Sport Chrome Emblem -ZZZE32 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. Pin type (Pin length: 14mm). Includes push nuts and bracket. | $ 23.56 |
 | Monster Sport Chrome Emblem -ZZZE37 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. No pin type. Includes double sided tape. | $ 23.56 |
| Monster Sport Chrome Emblem -ZZZE42 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. Pin type (Pin length: 17mm). Includes push nuts and bracket. | $ 26.55 |
| Monster Sport Chrome Emblem -ZZZE47 (Stickers and Emblems) | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. No pin type. Includes double sided tape. | $ 26.55 |
 | Monster Sport Door Reflection Sticker -896119-0000M (Stickers and Emblems) | ITEM DETAILS |
| High brightness reflective sheet. Set of 4 (2 x Large, 2 x Small). Large: H28 x W110 mm. Small: H20 x W90 mm. | $ 24.76 |
Back | Back to TOPCan't find a part or not listed for your model?
Email: [email protected]
Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.
|
Customer Services Contact Us Purchasing Information International Shipping Payment Methods Currency Conversion |
Don't Miss Out Mailing List Specials Product Catalogue |
About Greenline About Greenline |
We specialise in shipping internationally!
And offer local delivery by special arrangement.
© Greenline Motorsports, 2002-2026 Terms and Conditions, Privacy Policy
A Gosaru Solution
