Categories: | |
TRUST GReddy Profec -15500214 (Boost Controllers) | ITEM DETAILS | |
OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 235.76 |
Blitz Power Thro -BPT13 (Other Controllers) | ITEM DETAILS | |
Throttle controller and power increase! Boost (turbo vehicles) or airflow sensor signal (naturally aspirated vehicles) is controlled and optimised with throttle angle by Blitz's proprietary technology . Economy, sports, auto and smart throttle modes (total 25 modes) to fine tune throttle control to your driving style. In addition to the 25 modes, when used with the optional Scramble Switch (Sold separately), scramble mode can be accessed. When used with the optional harness (Sold separately), the Start Control System (SCS) function can be used. This features retains settings of the factory idling stop feature(on/off), and the SI Drive/Drive mode. Built in safety features which reverts to standard circuit should there be any fault. Designed for use with standard air cleaner or Blitz Air Filter/Air Cleaner Series. Kit is inclusive of Power Thro unit, Thro Con unit, controller and vehicle specific harness(s) (may not be not pictured). Power: +24.0PS. Torque: +25.9 Nm. For Type P/Type SP models. Suitable for use with Emergency Brake system equipped models. | $ 330.50 |
TRUST GReddy x Works Bell Rapfix II -70723801 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. Blue body, black sleeve. Height: 61mm. | $ 236.67 |
Works Bell Rapfix II Security Kit -103110 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Silver. Discontinued. | $ 230.41 |
Works Bell Rapfix Racing -103332 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system for competition cars. Attachment type: PCD 50.8mm, three holes. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 225.97 |
Works Bell Rapfix Racing -103330 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system for competition cars. Attachment type: Weld. Length: approx 90mm. Weight: approx 345g. Suitable steering wheels: PCD 50.8mm, three holes. 3-6 Hole Change Adapter (sold separately) required to use MOMO/Nardi 6 hole type steering wheels. | $ 207.19 |
Works Bell Rapfix GTC -103280 (Boss Kits) | ITEM DETAILS | |
With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Black. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 218.64 |
Works Bell Rapfix GTC -103270 (Boss Kits) | ITEM DETAILS | |
With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). Silver. Height: approx 57mm. Weight: approx 500g. Includes: GTC body, harness (middle coupler), ground (earth) ring, horn ring (cut type), jumper line with fuse, bolt. | $ 218.64 |
Works Bell Rapfix II Security Kit -103151 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Red. Discontinued. | $ 230.41 |
Works Bell Rapfix II Security Kit -103120 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Red. Discontinued. | $ 230.41 |
Works Bell Rapfix II Security Kit -103100 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Silver body, silver sleeve. Key Lock: Red. Discontinued. | $ 230.41 |
Works Bell Rapfix II Security Kit -103154 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Orange body, silver sleeve. Key Lock: Silver. Discontinued. | $ 230.41 |
Works Bell Rapfix II Security Kit -103152 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Blue body, silver sleeve. Key Lock: Silver. Discontinued. | $ 230.41 |
Works Bell Rapfix II Security Kit -103130 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Black body, black sleeve. Key Lock: Silver. Discontinued. | $ 230.41 |
Works Bell Rapfix II Security Kit -103150 (Boss Kits) | ITEM DETAILS | |
Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Rapfix II: Red body, silver sleeve. Key Lock: Silver. Discontinued. | $ 230.41 |
Works Bell Rapfix Flipper -103260 (Boss Kits) | ITEM DETAILS | |
Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.40 |
Works Bell Rapfix II -103060 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Orange body, silver sleeve. Height: 61mm. | $ 191.67 |
Works Bell Rapfix II -103040 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Blue body, silver sleeve. Height: 61mm. | $ 191.67 |
Works Bell Rapfix II -103020 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Black body, black sleeve. Height: 61mm. | $ 191.67 |
Works Bell Rapfix II -103010 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Silver body, silver sleeve. Height: 61mm. | $ 191.67 |
Works Bell Rapfix II -103030 (Boss Kits) | ITEM DETAILS | |
Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Red body, silver sleeve. Height: 61mm. | $ 191.67 |
Mine's D-S Steering -(GL)INSW-MNW-GEN-01 (Steering Wheels) | ITEM DETAILS | |
D shape steering wheel. Buck Skin. Black stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 450.68 |
Mine's R-S Steering -(GL)INSW-MNW-GEN-04 (Steering Wheels) | ITEM DETAILS | |
Round shape steering wheel. Leather and alcantara. Red stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 575.87 |
Mine's R-S Steering -(GL)INSW-MNW-GEN-03 (Steering Wheels) | ITEM DETAILS | |
Round shape steering wheel. Buck Skin. Black stitching. 350mm diameter. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 532.06 |
Mine's D-S Steering -IT-SW-F-9N (Steering Wheels) | ITEM DETAILS | |
D shape steering wheel. Leather and alcantara. Red stitching. 330mm diameter x 310mm. Includes horn button. For use with vehicle compatible steering wheel boss (hub) kits (Sold separately). | $ 494.50 |
Blitz Carbon Power Air Cleaner More Info -35231 (Air Filters) | ITEM DETAILS | |
Uses the highly acclaimed stainless mesh filter from SUS Power/Advance Power air cleaners. Conical body with "M" folds maximise the intake area, while balancing dust collecting ability with intake efficiency. The carbon shield deflects surrounding heat, preventing intake air temperature from rising. Being made from carbon, the shield itself emits very little heat. With proper care and maintenance, the stainless mesh filter can be used indefinitely. A3C. | $ 249.00 |
Blitz SUS Power Air Cleaner More Info -26231 (Air Filters) | ITEM DETAILS | |
Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. C4. | $ 154.80 |
TRUST Transmission/Differential Oil Cooler Kit -12004811 (Differential Oil Coolers) | ITEM DETAILS | |
Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 521.42 |
TRUST Transmission/Differential Oil Cooler Kit -12004811 (Transmission Oil Coolers) | ITEM DETAILS | |
Universal transmission or differential oil cooler kit. Universal. 4 row oil cooler core (Turnflow, 86x205x115mm, 0.9L). 160L/h Oil pump (37mm diameter, In: 15mm, Out: 8mm). | $ 521.42 |
SARD Fuel Regulator Standard -69010 G (Fuel Regulators) | ITEM DETAILS | |
Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. 8mm nipple type. Gold. Discontinued item - limited stock available. | $ 81.37 |
SARD Fuel Collector Tank -58264 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS | |
5L. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. AN#6 fittings. | $ 269.28 |
SARD Fuel Collector Tank -58284 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS | |
5L. Universal. For use with SARD Fuel Pumps (Dual). 5.0L. 180mm (diameter) x 215 (H). Stand height x 222.5mm. Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. 8mm fittings. | $ 269.28 |
SARD Fuel Collector Tank -58260 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS | |
L. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. AN#6 fittings. | $ 207.31 |
SARD Fuel Collector Tank -58280 (Fuel Swirl Pots and Collector Tanks) | ITEM DETAILS | |
L. Universal. For use with SARD Fuel Pumps (Dual). 170 x 185 x 205mm. Approx 5.8L. (Depending on pump sizes). Suitable for use with SARD (280/275/265/235/165/130) fuel pumps. 8mm fittings. | $ 207.31 |
TRUST GReddy Titanium Turbo Blanket -11900537 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS | |
High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For TD05/TD06/T67. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 112.23 |
TRUST GReddy Titanium Turbo Blanket -11900538 (Heat Shields and Heat Wrap (Bandages)) | ITEM DETAILS | |
High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. For T78/88/88H. Includes 2 x spring*. * Held in place with included springs or wire (not included). | $ 118.62 |
TRUST GReddy Oil Catch Tank Short -13500611 (Oil Breather Tanks) | ITEM DETAILS | |
Universal kit. 680ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 86.69 |
TRUST GReddy Oil Catch Tank Short -13500612 (Oil Breather Tanks) | ITEM DETAILS | |
Universal kit. 680ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 86.69 |
TRUST GReddy Oil Catch Tank Short -13500613 (Oil Breather Tanks) | ITEM DETAILS | |
Universal kit. 680ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 86.69 |
TRUST GReddy Oil Catch Tank 1000 -13500601 (Old: 13500509) (Oil Breather Tanks) | ITEM DETAILS | |
Universal kit. 1000ml. 9mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.01 |
TRUST GReddy Oil Catch Tank 1000 -13500602 (Old: 13500515) (Oil Breather Tanks) | ITEM DETAILS | |
Universal kit. 1000ml. 15mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.01 |
TRUST GReddy Oil Catch Tank 1000 -13500603 (Old: 13500516) (Oil Breather Tanks) | ITEM DETAILS | |
Universal kit. 1000ml. 19mm hose. Kit includes one hose (1m), hose bands, generic stay. | $ 92.01 |
ORIGIN Front EX Canard -W037-SET-carbon (Exterior Parts) | ITEM DETAILS | |
Universal. Pair (Left and right). Carbon. W75 x D375. | $ 94.52 |
Monster Sport Chrome Emblem -ZZZE32 (Stickers and Emblems) | ITEM DETAILS | |
ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. Pin type (Pin length: 14mm). Includes push nuts and bracket. | $ 23.41 |
Monster Sport Chrome Emblem -ZZZE37 (Stickers and Emblems) | ITEM DETAILS | |
ABS plastic emblem with chrome (mekki) finish. 100 x 15mm. No pin type. Includes double sided tape. | $ 23.41 |
Monster Sport Chrome Emblem -ZZZE42 (Stickers and Emblems) | ITEM DETAILS | |
ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. Pin type (Pin length: 17mm). Includes push nuts and bracket. | $ 26.38 |
Monster Sport Chrome Emblem -ZZZE47 (Stickers and Emblems) | ITEM DETAILS | |
ABS plastic emblem with chrome (mekki) finish. 150 x 20mm. No pin type. Includes double sided tape. | $ 26.38 |
Monster Sport Door Reflection Sticker -896119-0000M (Stickers and Emblems) | ITEM DETAILS | |
High brightness reflective sheet. Set of 4 (2 x Large, 2 x Small). Large: H28 x W110 mm. Small: H20 x W90 mm. | $ 24.60 |