Greenline Motorsports - Other Controllers List

Product Catalogue

Electronics

Other ControllersGreenline Motorsports - Other Controllers List

Filter: All brands

	Apex APEXi ACTIVE ECV	Check car compatibility
	Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. -157-A001

	Apex APEXi ACTIVE ECV Controller	Check car compatibility
	Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. -433-A002

	Apex APEXi ACTIVE ECV Controller (Old Version)	Check car compatibility
	Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. -433-A001

	Apex APEXi DECS ECV Controller	Check car compatibility
	DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. -432-A002

	Apex APEXi ECV (For DECS ECV Controller)	Check car compatibility
	-155-B020

	Apex APEXi Smart Accel Controller	Check car compatibility
	Throttle controller. 7 throttle modes: ECO x 3, Low Throttle, Boost Mode x 2 and High Throttle. Automatically reverts to standard mode when transmission put in reverse. Single button operation (Indicated by colour).

	Apex APEXi Smart Accel Controller Harness	Check car compatibility
	For use with APEXi Smart Accel Controller. Car specific harness.

	Bee-R DTC	Check car compatibility
	Direct Throttle Controller. Allows for linear throttle control/response. Compact version of DSS (Direct Throttling System). Read more... Custom made micro controller using a 4D map. This controller should be considered if contemplating conversion to JZX100 wire type throttle - works with standard ECU.

	Bee-R Rev Limiter	Check car compatibility

	Billion VFC II	Check car compatibility
	Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. -BVTW-03

	Billion VFC-Pro Dual Digital	Check car compatibility
	Variable Fan Controller PRO DD. -BVP-PRO2

	Billion VFC-Pro Dual Digital Manual Override Switch	Check car compatibility
	VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. -BVP-PRO2SW

	Blitz Brake Hold Jumper	Check car compatibility
	"Brake hold function" capable of holding the vehicle in position even when the brake pedal is not depressed when stopping on inclines. Although it is a very useful function, the function is reset each time the engine is turned off. Read more... Blitz's Brake Hold Jumper operates automatically each time the engine is started with the brake hold function turned on without any user input. * Some models will operate and release automatically in conjunction with the attachment and detachment of the seatbelt. Return to standard control is accessed by a simple operation when the Brake Hold Jumper function is not required. Car specific connectors and short parts, for bolt-on installation.

	Blitz E-ESC	Check car compatibility
	Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. -16087

	Blitz Idling Stop Jumper	Check car compatibility
	Blitz's idling stop jumper cancels standard idle stop function automatically each time the engine is started, without any user input. Easy installation that only connects three of power supply, ground, and signal wires. Return to standard control is accessed by a simple operation when the Idling Stop Jumper function is not required. -15800

	Blitz Power Thro	Check car compatibility
	Throttle controller and power increase! Boost (turbo vehicles) or airflow sensor signal (naturally aspirated vehicles) is controlled and optimised with throttle angle by Blitz's proprietary technology . Economy, sports, auto and smart throttle modes (total 25 modes) to fine tune throttle control to your driving style. Read more... In addition to the 25 modes, when used with the optional Scramble Switch (Sold separately), scramble mode can be accessed. When used with the optional harness (Sold separately), the Start Control System (SCS) function can be used. This features retains settings of the factory idling stop feature(on/off), and the SI Drive/Drive mode. Built in safety features which reverts to standard circuit should there be any fault. Designed for use with standard air cleaner or Blitz Air Filter/Air Cleaner Series. Kit is inclusive of Power Thro unit, Thro Con unit, controller and vehicle specific harness(s) (may not be not pictured).

	Blitz Reverse Cancel Harness	Check car compatibility
	For use with Blitz throttle controllers. Turns throttle controller into "OFF" mode when the vechicle is put in reverse gear.

	Blitz Scramble Switch	Check car compatibility
	For use with Blitz Throttle Controller Full Auto PRO/PLUS. Required for scramble feature to function.

	Blitz SCS Harness	Check car compatibility
	Start Control System Harness. Blitz throttle controller option part (compatible models only). Retains idling stop setting (on/off), and drive mode on Subaru SI Drive, Lexus Drive Mode Select etc for whenever you start your car.

	Blitz Sma Thro	Check car compatibility
	Smart Thro-Con (Smart Throttle Controller). Compact on/off switch for 1 of 10 throttle modes. Switch can be installed in one of three configurations (some models include bundled with service panel adapter). Read more... Plug and play installation with car specific harness. 10 modes: 8 ratio fixed modes, and 2 auto modes (Selectable by rotary switch on the side of main unit). Reverse cancel harness (sold separately) switches unit off when reverse is engaged. Function to select ON/OFF at each engine start is also enabled when used with the reverse cancellation harness. Equipped with safety functions such as normal return function.

	Blitz Sma Thro X	Check car compatibility
	Throttle Controller. Smart Thro X is an affordable throttle controller that allows for smart installation. The compact ON/OFF switch can be installed in up to three ways. In addition to the switch itself and adapter, some part numbers include a service panel adapter for even smarter installation to specific vehicle models. Apart from the eight fixed ratio modes, there are two auto modes, making for a total of 10 modes. Switch between modes using the rotary switch on the main unit. Read more... In auto mode, the throttle opening is automatically controlled according to the situation, resulting in a smooth, seamless drive. Installation is plug-and-play design that connects to the vehicle's sensor harness. Includes a dedicated harness for each vehicle model. Power-saving circuitry eliminates the need for 12V power wiring. Direct control by a newly adopted high-performance full microcomputer improves tracking and responsiveness to vehicle signals compared to previous products. Acceleration and deceleration changes in response to accelerator operation are smoother. With the flip of a switch, you can also switch between ON/OFF start settings when starting the engine. By connecting the reverse cancel harness (sold separately), you can also use the safety feature that returns to normal when reverse gear is engaged. The built-in buzzer makes setup easier, and the newly designed control circuit makes it compatible with vehicles that were not previously compatible.

	Blitz Speed Jumper	Check car compatibility
	Bolt on speed limiter remover.

	Blitz Thro Con	Check car compatibility
	Throttle Controller. In addition to standard 20 modes including auto mode, Blitz Thro Con also supports options such as newly developed start control system. High visability VA type liquid crystal display. 20 modes are installed as standard. Different control methods and different characteristics realize the throttle feel that suits your taste. The "hybrid model" has control ratio settings tuned specifically for hybrid vehicles. Read more... "Simple mode function" displays only your 5 favorite modes to be used frequently, is installed from the 20 modes. By setting in advance, you can save time and effort at the time of mode selection. In addition to the standard 20 modes, "Scramble mode" that raises the ratio to the maximum is installed (Separately sold option part is necessary). "Start Control System (SCS)" function is available by connecting optional SCS harness (Sold separately). This makes it possible to retain the cancellation state of standard idling stop and retain the initial mode of SI drive and drive mode selection as you wish (on equipped vehicles). Should trouble occur in the power supply wiring, the safety function reverts back to the normal circuit immediately.

	Blitz Thro Con Scramble Switch	Check car compatibility
	Throttle Controller Scramble Switch. Option part that allows access to scramble modes in compatible Blitz throttle controllers. Push the switch to instantly access high performance ratio mode (Higher than the normal SPORT MAX mode) for situations where rapid acceleration is required immediately. Read more... Once accessed, throttle controller will display countdown. Scramble time can be set to either 30 seconds, 180 seconds, or always on (scramble mode activated until switch is turned off).

	Blitz Thro Con SCS Harness	Check car compatibility
	Throttle Controller Start Control System Harness. Blitz throttle controller option part (compatible models only). Retains idling stop setting (on/off), and drive mode on Subaru SI Drive, Lexus Drive Mode Select etc for whenever you start your car.

	Blitz Throttle Controller	Check car compatibility
	4 standard modes: ECO, SP1, SP2 and SP3.

	Blitz Throttle Controller Full Auto LIGHT	Check car compatibility
	Compact type: On/Off Switch, main unit and harness. 8 standard modes (2 x Economy, 3 x Mild, 3 x Sport) and 2 auto modes. Automatic calibration function learns the factory sensors for reliable control.

	Blitz Throttle Controller Full Auto PLUS	Check car compatibility
	23 modes. Standard (14): 6 x Economy, 5 x Sports, 3 x Hi Sports Auto (9): 2 x Economy Auto, 5 x Sports Auto, 2 x Custom Auto Scramble mode (switch required). Controller, unit and harness kit.

	Blitz Throttle Controller Full Auto PRO	Check car compatibility
	Hi Spec. 10 standard modes (3 x Economy, 4 x Mild, 3 x Sport), scramble mode (switch required) and 2 auto modes. Automatic calibration function learns the factory sensors for reliable control.

	Blitz Throttle Controller ver BLUE	Check car compatibility
	4 standard modes: ECO, SP1, SP2 and SP3.

	CUSCO I.W.C.	Check car compatibility
	Intercooler Waterspray Controller. Includes: Controller unit, 2 x double sided tape, 3 x W Support adapter and spare fuse 10A. -00B-732-A

	CUSCO I.W.C. Nozzle Kit	Check car compatibility
	For use with CUSCO I.W.C. Includes 1 x Nozzle, generic stays, nuts, one way valve, hose, 5 x lock ties. -00B-732-B

	CUSCO Reverse Cancel Harness	Check car compatibility
	Turns throttle controller into "OFF" mode when the vechicle is put in reverse gear.

	CUSCO Throttle Controller	Check car compatibility
	4 modes (ECO, 3 x Sports).

	CUSCO VSC Canceller	Check car compatibility
	Vehicle stability control canceller (VSCC). Cancels the integrated control of traction control and anti-slip device (ESP / Electronic Stability Program). Even if the cut switch (operation) is performed, the control forcibly intervenes and operated for safety, but with this system it is possible to completely cancel with a single button. . Read more... It also stores the state (memory function), and can be restored to the previous state when the engine is turned on again. By cancelling the electronic control that bothers circuit users as well as sporty driving, it is possible to enjoy the sporty response and behavior inherent to the car.

	Do Luck AWD Switcher	Check car compatibility
	AWD to RWD switch.

	Do Luck Coding Box	Check car compatibility
	Transmission controller and DTC error canceller.

	Do Luck D-ACD-M	Check car compatibility
	Torque management controller.

	Do Luck D-ETS-M	Check car compatibility
	Torque management controller.

	Do Luck Digital G Sensor	Check car compatibility
	High response digital G Sensor.

	Do Luck Digital G Sensor V2	Check car compatibility
	Using a highly sensitive digital G-sensor, it responds very quickly to vehicle changes and is effective in all situations. Read more... The new V2 (version 2) allows you to change the settings by switching between 4 different modes. This item is also suitable to used as a replacement part for vehicles with broken genuine G-sensors. Easy installation using the included model-specific couplers.

	Do Luck DTM Cover	Check car compatibility
	D Torque Management controller (D-ETS-M/D-ACD-M) cover. FRP (Matte black paint). Pictured D-ETS-M not included.

	Do Luck ISC	Check car compatibility
	Intercooler Spray Controller. Do Luck ISC can control spray based on pressure. Pressing and holding the manual button switches ISC auto mode. Read more... Manual spray is possible when ISC auto mode is disabled. For installation, remove the normal timer relay coupler and connect the unit. The pressure sensor signal can be easily obatined by connecting a single wire with a coupler.

	Do Luck Tarzan G Box	Check car compatibility
	G Sensor that improves 4WD performance under any condition. Developed by Tarzan Yamada.

	Do Luck Tarzan G Box V2	Check car compatibility
	Digital G sensor that racing driver Tarzan Yamada set up using his knowledge and experience to improve 4WD performance in any situation. Replaces the standard G-sensor and outputs a signal many times faster. Read more... It intervenes in the 4WD system by setting various parameters such as front/rear/left/right ratio, width, and delay time. Reacts quickly to front, rear, left and right input G and outputs appropriate signals to each 4WD/ABS unit improving cornering performance and traction. Since the response and transmission speed of ABS is improved, stable braking can be performed without time lag. New V2 (version 2) allows you to switch between 4 modes.

	Do Luck Tire Pressure Monitor Canceller	Check car compatibility
	Eliminates tire pressure error when using wheels without standard tire pressure sensors.

	Do Luck Torque Manager II	Check car compatibility
	Front/rear torque split controller.

	Do Luck Torque Manager II and Digital G Sensor	Check car compatibility
	Front/rear torque split controller with high response digital G Sensor. Digital G sensor input allows for quick reaction of the AWD system (no lag). Read more... White LEDs display are used on the controller, and the wide viewing angle provides easy viewing from whererever it is installed on the instrument panel. G-Box (G sensor based), and AXR (Accelerator/throttle sensor based) modes. 3 preset modes (Street, race, normal), and custom mode (Total 4 modes). Feature to edit throttle signal (map).

	FIELD E-TS Linear	Check car compatibility
	Electronic torque split controller. Discontinued.

	Garage HRS Cyber EVO ACD Controller	Check car compatibility
	Circuit (competition tyres), sports (street tyres) and rain mode switchable.

	GRID Dancer Dash	Check car compatibility
	ATESSA E-TS Controller.

	GRID Digital G Sensor	Check car compatibility
	Digital G Sensor.

	GRID Digital IMU Sensor More Info	Check car compatibility
	ATESSA E-TS IMU (Inertial Measurement Unit) Sensor. The pinnacle of digital G sensors. The GRID Digital IMU Sensor is a gyro sensor that detects front and rear pitch, left and right roll, and drift yaw to compensate for weak points that react after the G sensor (acceleration G/ deceleration G/lateral G) occurs. For example, the gyro in the IMU can detect the change in pitch (tail sinking) when acceleration begins, faster than the detection of acceleration from a change in G force. Read more... During cornering, it is possible to determine body roll changes, direction of vehicle travel (yaw) changes, and if the vehicle is a skidding/drift state. Ultimately, faster transition to 4WD during starting acceleration, faster transition to 4WD during hard braking, and 4WD control reponsive to changes from between acceleration and deceleration. Front torque that is reponsive to body roll changes when steering inputs, as well as transition to 4WD when drift is detected. By using conventional G sensor and this IMU gyroscope (to detect movement of the car body), changes in the vehicle posture are detected in real-time, with high-precision, allowing for 4WD ATESSA control not possible in the past.

	GRID R34 Digital Yaw Rate Sensor	Check car compatibility
	Digital yaw rate sensor for use with R34 GT-R V Spec active LSD models.

	GRID SUPER HICAS Controller	Check car compatibility
	SUPER HICAS Cancel System. For hydraulic type HICAS only.

	GRID TS Dancer	Check car compatibility
	ATESSA E-TS Controller.

	GRID TS Dancer 2	Check car compatibility
	ATESSA E-TS Controller.

	GRID TS Dancer 2 Harness	Check car compatibility
	Option part for use with GRID TS Dancer 2.

	GRID TS-D Meter Linkage Kit	Check car compatibility
	Allows for correct values to be displayed on torque split gauge. For use with GRID TS Dancer (Not suitable for TS Dancer 2).

	HKS AFR	Check car compatibility
	Air Fuel Ratio Regulator.

	HKS ALC II	Check car compatibility
	Automatic Line Pressure Converter. Discontinued.

	HKS ATSC	Check car compatibility
	Active Torque Split Computer.

	HKS EIDS	Check car compatibility
	Electronic Idling Stabilizer. To prevent engine stall, output voltage of air flow meter is adjsuted. When intake parts are changed like installation of blow off valve, air flow meter output voltage is sometimes affected when throttle is closed. EIDS solves this problem. Read more... * It is only for throttle sensors, which output characteristic is linear. It cannot be used for throttle switch. It does not solve idling problem that is not related with air flow meter output after throttle is closed. Engine stalls after installation of intake/blow off parts? Imbalances in airflow meter output voltage can be the cause. When throttles of a vehicle that utilizes atmosphere venting blow-off valve is off while driving. Fluctuation of airflow output voltage occurs and causes engine stalling.

	HKS EIDS PRO	Check car compatibility
	Electronic Idling Pro Stabilizer.

	HKS ETC	Check car compatibility
	Electronic Torque Split Contoller. Discontinued.

	HKS Fan Controller	Check car compatibility
	Discontinued.

	HKS FCD	Check car compatibility
	Fuel (Boost) Cut Defencer. Removes fuel cut that occurs when increasing boost on turbo charged engines. Although it is relatively easy to increase boost level on turbo cars, the standard computer on some models determines that the higher level of boost as abnormal and controls cuts fuel to preserve the engine. Read more... This FCD removes this fuel cut and widens the range of possible boost pressure settings. Please note that the FCD cannot control fuel and engine damage can occur if boost level is excessive.

	HKS FSC	Check car compatibility
	Fan and speed Controller.

	HKS SEC	Check car compatibility
	Suspension Error Canceller. Stops suspension system problem error code from display when using aftermarket dampers/coilover suspsension.

	HKS SEC II	Check car compatibility
	Suspension Error Canceller II. Stops suspension system problem error code from display when using aftermarket dampers/coilover suspsension.

	HKS SLD	Check car compatibility
	Speed Limit Defencer.

	HKS VAC	Check car compatibility
	Velocity Advanced Computer.

	HKS Kansai E-TS Controller	Check car compatibility

	HPI Multi Temp Controller	Check car compatibility
	Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. -HPEE-MTC

	J's Racing Speed Limiter Cut	Check car compatibility

	K's Digital G Sensor	Check car compatibility

	K's Digital Stability Controller	Check car compatibility

	Kinokuni Run Max Electric Fan Control Kit	Check car compatibility
	-1403N

	Kinokuni Run Max Separate Electric Fan Multi Control Kit	Check car compatibility
	-1405

	MIDORI A/T Racing Shift Harness	Check car compatibility
	Converts automatic manual mode shift lever operation. Pull to shift up, push to shift down.

	MIDORI Digital ATESSA E-TS Conroller	Check car compatibility
	Optimised mapping for more aggressive 4WD control. The digital ATTESA E - TS controller stabilizes the behavior of the R35 GT-R, by suppressing the intervention of the vehicle stabilizer VDC operation during normal cornering, provides repeatable power oversteer and understeer. Fully compativle with the standard CAN communication system, there is no problems with the vehicle's electronics. Install is performed by simply by connecting the couplers between the G sensor and the wiring on the vehicle side.

	MIDORI Digital G Sensor	Check car compatibility

	MIDORI V Spec Digital Yaw Rate Sensor	Check car compatibility
	Provides overwhelming traction performance, where the accelerator applied earlier in tight corners. The yaw rate sensor for controlling the active LSD on V-Spec models detects the rotation angle and rate of change during cornering. When using an analog type yaw rate sensor, over steer will occur due to idling of the rear inner ring when power is applied at the start of the corner. This digital type yaw rate sensor optimises the time that the LSD is in effect.

	Mine's ACD Controller	Check car compatibility
	Street~circuit use.

	NEKO Corporation ETS Controller	Check car compatibility
	Full control of 4WD torque distribution.

	PIVOT 3-DRIVE	Check car compatibility
	Throttle Controller. -3-DRIVE

	PIVOT 3-DRIVE BLP More Info	Check car compatibility
	Throttle controller with built in manual transmission auto-blipping function. Auto-Blipping removes the need for the conventional heel and toe technique used to raise rpm with the accelerator while braking at the same time in an attempt to prevent slipping and turbulent motion caused by rapid downshifts when sports driving in manual transmission model cars. Read more... This allows the driver to concentrate more on braking which in turn results in a more accurate and smoother deceleration. Operation is safe, as the Auto-Blipping function does not operate when accelerating without braking, or when a set speed has not been reached. The controller has three throttle modes to match your driving style and conditions whether driving for sport, driving on slippery roads, or driving with gas efficiency in mind: Normal Mode for regular response, Sports Mode with 7 steps for a quicker response, and ECO Mode with 3 steps for a slower response. The choice is yours. -3-DRIVE-BLP

	PIVOT 3-DRIVE Brake Harness More Info	Check car compatibility
	Option part for use with 3-DRIVE BLP for seamless bolt on installation.

	PIVOT 3-DRIVE Car Specialized Harness	Check car compatibility
	Car specific harness, for bolt on installation of PIVOT 3-DRIVE throttle controllers.

	PIVOT 3-DRIVE Clutch Harness	Check car compatibility
	Option part for use with 3-DRIVE BLP for seamless bolt on installation.

	PIVOT 3-DRIVE Compact More Info	Check car compatibility
	High performance, low cost, all in a compact body. -THC

	PIVOT 3-DRIVE Compact - Euro Series More Info	Check car compatibility
	High performance, low cost, all in a compact body. For use with compatible BMW and Volkswagen models. -THC-BM/VW

	PIVOT 3-DRIVE Compact - Mazda More Info	Check car compatibility
	High performance, low cost, all in a compact body. For use with Mazda pulse signal accelerator equipped models. -THC-M

	PIVOT 3-DRIVE EVO	Check car compatibility
	Throttle controller with no OBD Connection necessary! All-in-One design means most value for your money. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Read more... Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving.

	PIVOT 3-DRIVE Extension Cable	Check car compatibility
	1m extension cable for 3-DRIVE Car Specialized Harnesses. For use with: PIVOT 3-DRIVE EVO, 3-DRIVE LIGHT, 3-DRIVE COMPACT and 3-DRIVE AC.

	PIVOT 3-DRIVE Flat More Info	Check car compatibility
	Ultra thin compact throttle controller for a sleek, clean look. -THF2

	PIVOT 3-DRIVE Flat - Euro Series More Info	Check car compatibility
	Ultra thin compact throttle controller for a sleek, clean look. For use with compatible BMW and Volkswagen models. Includes specialized harness. -THF2-BM/VW

	PIVOT 3-DRIVE Light - Euro Series More Info	Check car compatibility
	Easy Direct-to-Accelerator Connection. For use with compatible models. Includes specialized harness. -T3DL-MB

	PIVOT 3-DRIVE PRO	Check car compatibility
	Throttle controller with no OBD Connection necessary! Low-Profile Controller allows discrete installation. Compatible with Collision Mitigation Systems and Euro Cars. Easy Connection to Accelerator Connector - Simplified wiring prevents signal malfunctions caused by decreased voltage due to low-current circuitry. Read more... Suitable for use with OBD connected products - With no need for a power connection to the OBD, it is possible to use other OBD connected products without a splitter connection. Compact Controller Provides discrete standard-style installation - The compact, thin, square design with accentuated edge allows for installation in any number of places without that added-on look. 17 Step / 4 Mode Wide-Range Adjustment The four modes include: POWER mode with 7 steps for increasing response across all ranges, RESPONSE mode with 5 steps for increasing response, like a wire throttle, in the lower and middle ranges, ECO mode with 5 steps for suppressing rapid acceleration to help increase gas mileage, and NORMAL mode for regular driving.

	PIVOT 3-DRIVE X More Info	Check car compatibility
	World's first throttle controller with multi monitor for display of engine parameters. -3-DRIVE-X

	PIVOT DIRECT DRIVE	Check car compatibility
	Throttle direct controller. Maximizes the engine power of 86 and BRZ by making the response of the entire accelerator area quicker by direct control of the throttle. Response is linear with the accelerator opening and operation closer to a traditional wire throttle. Response is adjustable in 10 stages according to the characteristics of the application and driver preference.

	PIVOT Fan Control Gauge	Check car compatibility
	Discontinued. -FCG

	PIVOT Nozzle Kit	Check car compatibility
	For use with PIVOT Water Spray Controller. Price only valid for purchase with PIVOT Water Spray Controller. Discontinued. -(GL)WSP-NK

	PIVOT Retractor Half Unit RHU-M	Check car compatibility
	Allows adjustment of headlight from closed to 80% open from the driver's seat on applicable vehicles.

	PIVOT Super Temp Controller	Check car compatibility
	Fan controller with water or oil temperature display. -STC

	PIVOT Water Spray Controller	Check car compatibility
	-(GL)WSP

	Power House amuse ETCS Monitor	Check car compatibility

	Ralliart ACD ECU	Check car compatibility

	Ralliart Super AYC ECU	Check car compatibility

	Rs Racing Service RRP VSC Canceller	Check car compatibility

	Showa Garage VSCC	Check car compatibility
	A device that cancels the traction control, skid prevention device, etc. (vehicle stability control). Restores the vehicle's original behavior and response. Read more... With this device, control can be canceled with a single button operation, leaving only ABS is functioning. It is a must-have item for serious off-road driving, such as steep hill climbs while spinning the tires. The state is memorized and the engine is turned off while it is on, it will remain on even when restarting. While driving on the track, you can quickly return to running even if the engine stops unexpectedly due to an accident such as a spin or going off course.

	Toyota GR Computer Assy, 4WD	Check car compatibility
	Computer assembly. 4WD ECU.

	TRUST GReddy Boost Limiter Cut Controller	Check car compatibility

	TRUST GReddy Dual Switching Controller	Check car compatibility
	Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. -15500610

	TRUST GReddy Multi Switching System	Check car compatibility
	-15500600

	TRUST GReddy Relay Kit	Check car compatibility
	For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). -15901400

	TRUST GReddy Speed Limiter Cut Controller Type A	Check car compatibility
	-15590201

	TRUST GReddy Switching Harness	Check car compatibility
	-15901300

	Yashio Factory Okachan Water Temp 3	Check car compatibility
	By simply connecting to the vehicle's consult connector, you can display a total of 19 types of information, including water temperature. In addition to 1-channel display, 2-channel display and multi-channel display modes are also possible. It is also possible to set warnings for each channel and display fuel maps in real time. Also equipped with an active test function, allowing you to perform fuel pump and cylinder tests. Read more... Features: - Coupler ON design, no wiring required. - Simple, easy-to-read large single-color LCD screen + white backlight that is easy on the eyes. - Various display menus (1ch/2ch/multich/map). - Equipped with real-time map monitor function to help with settings. - Various warning settings are possible. - Peak hold function. - Fault diagnosis function. Made in Japan. Displayable parameters (via Nissan Consult connector): Engine speed, vehicle speed, water temperature, battery voltage, throttle voltage, airflow voltage 1, airflow voltage 2, ignition timing, injector 1, injector 2, ACC valve, O2 sensor voltage 1, O2 sensor voltage 2, A/F correction 1, A/F correction 2, intake temperature, neutral switch, power steering switch, air conditioner switch.

	Yashio Factory Okachan Water Temp 3 - GTR	Check car compatibility
	By simply connecting to the vehicle's consult connector, you can display a total of 19 types of information, including water temperature. In addition to 1-channel display, 2-channel display and multi-channel display modes are also possible. It is also possible to set warnings for each channel and display fuel maps in real time. Also equipped with an active test function, allowing you to perform fuel pump and cylinder tests. Read more... Features: - Coupler ON design, no wiring required. - Simple, easy-to-read large single-color LCD screen + white backlight that is easy on the eyes. - Various display menus (1ch/2ch/multich/map). - Equipped with real-time map monitor function to help with settings. - Various warning settings are possible. - Peak hold function. - Fault diagnosis function. Made in Japan. Displayable parameters (via Nissan Consult connector): Engine speed, vehicle speed, water temperature, battery voltage, throttle voltage, airflow voltage 1, airflow voltage 2, ignition timing, injector 1, injector 2, ACC valve, O2 sensor voltage 1, O2 sensor voltage 2, A/F correction 1, A/F correction 2, intake temperature, neutral switch, power steering switch, air conditioner switch.

	Yashio Factory Okachan Water Temp oC	Check car compatibility
	-(GL)EL-OT-YFT-03

	Yashio Factory Okachan Water Temp Sensor	Check car compatibility
	For use with Okachan Water Temp oC. Includes harness. -(GL)EL-OT-YFT-06

	Yashio Factory Okachan Water Temp Sensor Attachment	Check car compatibility
	For use with Okachan Water Temp oC. -(GL)EL-OT-YFT-07

Back | Back to TOP

Can't find a part or not listed for your model?
Email: [email protected]

Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.

Display Currency	Delivery Destination