Greenline Motorsports - Belts and Chains List

Product Catalogue

Engine Parts

Belts and ChainsGreenline Motorsports - Belts and Chains List

Filter: All brands

	Apex APEXi STB Heavy Duty Timing Belt	Check car compatibility
	Sports tuning belt.

	C-ONE Sports Tming Belt	Check car compatibility

	HKS Fine Tune Timing Belt	Check car compatibility
	Designed for use with HKS Slide Cam-Pullies (Sold separately), these belts are optimized for each engine type. Ideal for high power/high rpm applications. Designed to allow stable belt extension even when heat expansion occurs in the engine. Read more... Correctly shaped belt teeth reduces chances of slipping in high torque engines at lower belt tension, therefore not compromising belt strength. Teeth rubber are made from H-NBR grade rubber for additional strength. * Materials and/or molding method may vary sightly depending on application.

	HKS Fine Tune V Belt	Check car compatibility
	Using the latest in belt technology, these belts maintain engine condition, while improving engine room appearance. Increased durability at high temperatures which can be found in the engine bay of tuned vehicles. Increased performance in cold weather conditions. Lightweight and good friction tolerance properties, mean that excess tension is not required, while anti-sound properties reduces belt squeal. Read more... EPDM (Ethylene Propylene Diene Monomer) Rubber is used in the manufacture of these belts because of: - Better durability and performance in hotter or colder conditions with improved friction tolerance. - Much lighter than previous version of belt. - Short fiber mixture in rib rubber improves the performance over previous version. Compared to standard belts: High temperature durability: 4 times greater. Low temperature durability: 10 times greater. Abrasion resistance: 30% improved. Weight: 17% lighter. Noise: Less.

	HKS Suzuki Low Modulus Belt Remover Installer Set	Check car compatibility
	Special tools for removal/install Suzuki belts.

	J's Racing Heavy Duty Chain Tensioiner	Check car compatibility

	KAMEARI 2TG Gear Train Kit	Check car compatibility
	Replaces timing chain (1st chain - lower) with gears. Eliminates horsepower loss and timing problems.

	KAMEARI Adjustable Chain Tensioner	Check car compatibility

	KAMEARI Chain Guide (Second)	Check car compatibility

	KAMEARI Heavy Duty Timing Chain	Check car compatibility
	Reinforced timing chain.

	KAMEARI Idler Tensioner	Check car compatibility

	KAMEARI Tensioner	Check car compatibility

	KAMEARI Twin Idler Gear	Check car compatibility

	Monster Sport Heavy Duty Timing Belt	Check car compatibility

	MUGEN Compressor Belt	Check car compatibility
	Short belt for applications removing air conditioning.

	NAPREC Reinforced Timing Chain	Check car compatibility

	NISMO Timing Belt	Check car compatibility
	Reinforced timing belt. Core wires of tempered glass fiber with the tooth fabric made of aramid fiber makes an immediate improvement in resistance to stretch, heat, cutting, tooth loss and abrasion. Read more... The result is greater endurance to the high heat, sudden changes in rpm and torque that you get with a tuning engine, so that the maximum potential of your engine can be realized. Identical in shape to the standard Nissan production part. Compared with genuine NISSAN timing belt: * Strength resistance 1.2 times greater. * Heat resistance 1.8 times greater. * Cut resistance 3 times greater. * Tooth loss and abrasion resistance 9 times greater.

	Power Enterprise Super Kevlar II Timing Belt	Check car compatibility
	Stretch resistant - Maintains long-term performance. Significant improvements against belt tooth failure and cut resistance. Drives camshafts accurately.

	Power Enterprise Super Kevlar V Belt	Check car compatibility
	Compared to standard belts, Power Enterprise Super Kevlar V Belts are: 4 times more heat resistant. 3 times more resistant to slip. 2 times less abrasive.

	Rs Racing Service RRP Hyper Kevlar Belt	Check car compatibility
	Reinforced belt with greatly improved durability, heat resistance, slip resistance, and abrasion resistance.

	SPOON SPORTS Alternator Belt	Check car compatibility
	Short belt for when compressor is removed. Ideal for race applications.

	STi Timing Belt	Check car compatibility
	Heavy duty type. For competition use. EJ20 engines.

	STi V Belt	Check car compatibility
	Heavy duty type. Greater extreme temperature tolerance (-35~85°C).

	TODA Heavy Duty Balancer Chain	Check car compatibility

	TODA Heavy Duty Chain Tensioner	Check car compatibility
	By overcoming the standard (oil pressure) auto tensioner's weak-points, correct tension is maintained, preventing the valve timing slipping under engine braking. Recommended for use in conjunction with TODA Heavy Duty Timing Chain to attain the most from the improved durability, reduced friction, improved camshaft timing accuracy.

	TODA Heavy Duty Oil Pump Chain	Check car compatibility

	TODA Heavy Duty Timing Belt Adjuster Bolt	Check car compatibility
	C30A/C32B Timing Belt Adjuster High Strength Bolt can be used not only with TODA High Power Timing Belt, but also with OEM timing belt. The bolt is made by high strength materials and having a longer bolt length than standard, which allows higher bolt tightening torque. This will help to avoid an adjust pulley moving under high load use of the engine.

	TODA Heavy Duty Timing Chain	Check car compatibility
	With the extra demands of hi-performance driving, even with the standard road engine and/or components such as camshafts that place extra stress on the valve train system, improved chain strength is important. After reviewing the design of the original chains, TODA's Heavy Duty Timing Chains offer improved accuracy and durability. The highly precise side plates reduce friction and improve the revolution fatigue strength. Reduction in the burrs and the finish of the plates was achieved by increasing the area of the plates. Moreover, due to the higher precision of manufacture, the hole size and shape in the plate have enabled the use of a larger diameter pin. This also contributes to reducing the stretching of the chain under constant high velocity revolutions by as much as 35%.

	TODA High Power Timing Belt	Check car compatibility
	The additional stresses placed on the original OEM timing belt are considerable when using up-rated valve springs and high lift camshafts in more arduous sports driving conditions. These additional stresses lead to, among other things increased stretch degradation resulting in inaccurate valve timing as well as reduced durability. Read more... TODA High Power Timing Belts are designed from high quality materials to give improved durability as well as reduced stretch degradation. Compared to standard belts: Resistance to cutting: approx. 3.5~4 times. Heat resistance: approx. 2.5~3 times. Tooth integrity: approx. 3~4 times. Resistance to abrasion: approx. 2.5 ~ 3 times.

	TOMEI Nissan Adjustable Belt Tensioner (Alternator Relocation)	Check car compatibility
	Nissan adjustable belt tensioner and fitting parts. Requires TOMEI High Strength Stud Bolt and TOMEI Tensioner Height Adjustment (Both sold separately).

	TOMEI Alternator Relocation Bracket	Check car compatibility
	Brackets for relocation of the alternator, prevents fan belt from dropping out. Protects Cylinder Block Under extreme conditions such as competition use, the stock cylinder block easily gets cracked due to a stud bolt underneath the alternator by its own vibration. Relocating the alternator with this kit also prevents this problem. Read more... Keeps Alterator away from heat When running a big turbo on 1JZ/2JZ, the alternator is directly exposed to the heat coming from the exhaust. It's ideal to relocate the alternator to the intake side to prevent heat damage. For applications where air con compressor has been removed. Significantly increased durability to support the performance and withstand extreme conditions in highly tuned engine. Redesigned with higher class material and thicker structure. Designed to accommodate a tensioner pulley as necessary for the electric water pump setup popular competition vehicles (Not included).

	TOMEI Alternator Relocation Bracket (Old Version)	Check car compatibility
	Brackets for relocation of the alternator, prevents fan belt from dropping out. Protects Cylinder Block Under extreme conditions such as competition use, the stock cylinder block easily gets cracked due to a stud bolt underneath the alternator by its own vibration. Read more... Relocating the alternator with this kit also prevents this problem. Keeps Alterator away from heat When running a big turbo on 1JZ/2JZ, the alternator is directly exposed to the heat coming from the exhaust. It's ideal to relocate the alternator to the intake side to prevent heat damage. For applications where air con compressor has been removed.

	TOMEI Balancer Belt	Check car compatibility

	TOMEI Balancer Belt (Old Version)	Check car compatibility

	TOMEI EJ Timing Belt Guide	Check car compatibility

	TOMEI Heavy Duty Timing Belt	Check car compatibility
	Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more.

	TOMEI Heavy Duty Timing Belt (Old Version )	Check car compatibility
	Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more.

	TOMEI High Strength Stud Bolt	Check car compatibility
	Required for installation of adjustable belt tensioner when using TOMEI Alternator Relocation Bracket.

	TOMEI Tensioner Height Adjustment	Check car compatibility
	Modification service of Nissan Adjustable Belt Tensioner (Sold separately) for use with Alternator Relocation Bracket.

	TOMEI Timing Chain Tensioner Release Bar	Check car compatibility

	TRUST GReddy Heavy Duty Balancer Belt	Check car compatibility

	TRUST GReddy Heavy Duty Timing Belt	Check car compatibility
	Extreme Timing Belt. Engineered to increase heat-resistance, flexibility and durability, TRUST GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consistent and last longer.

	TRUST GReddy Heavy Duty V Belt	Check car compatibility

Back | Back to TOP

Can't find a part or not listed for your model?
Email: [email protected]

Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.

Display Currency	Delivery Destination