Greenline Motorsports - Induction Boxes and Ducts List

Product Catalogue

Intake

Induction Boxes and DuctsGreenline Motorsports - Induction Boxes and Ducts List

Filter: All brands

	Apex APEXi Aluminium Induction Box	Check car compatibility

	Apex APEXi Intake D Plus	Check car compatibility
	Intake duct which increases the intake air volume.

	Apex APEXi Intake D Plus CFRP	Check car compatibility
	Carbon intake duct which increases the intake air volume.

	ARC Aluminium Suction Pipe	Check car compatibility

	ARC New Super Induction Box	Check car compatibility
	Includes filter(s).

	ARC Super Induction Box	Check car compatibility
	Includes filter(s).

	AutoExe Fresh Air Guide	Check car compatibility
	Improves inhalation efficiency by capturing the moving air directly from the front of the car body. For mass-produced vehicles, there is no clear intake path from the front grill to the air intake port. Read more... Installed inside the front bumper, for standard air cleaner box, ram air intake system or sports induction box. Suitable for standard or AutoExe bumper. FRP (Red gel coat). Reauires removal of the upper part of the front bumper for installation. Depending on the type of vehicle you may also need to relocate the horn.

	AutoExe Ram Air Intake System	Check car compatibility
	High end model that pursues efficiency and improved appearance. The "Ram Air Intake System" was born with the concept of pushing air with supercharging - ram pressure by the incoming air. Because it depends on the vehicle speed, it is rare that a positive pressure is actually applied, but the effect of efficiently taking in oxygen rich air that is not affected by the radiant heat of the engine is large. Read more... This system is designed to promote fuel injection and increase power and torque by increasing the amount of intake air within the A/F (Air/Fuel ratio) correction margin of mass production ECUs. The basic configuration is an intake duct (excluding some car models) that takes in fresh air from the front of the bumper, a large-capacity cleaner box specially designed for the intake path, and a low-resistance K & N wet air filter that can be cleaned with the attached maintenance kit. The intake pipe length and inner diameter are also optimized according to the vehicle type and engine, providing a powerful acceleration from the moment you start stepping on the accelerator. The appearance made of real carbon is also high quality.

	AutoExe Ram Air Intake System (Old Version)	Check car compatibility
	High end model that pursues efficiency and improved appearance. The "Ram Air Intake System" was born with the concept of pushing air with supercharging - ram pressure by the incoming air. Because it depends on the vehicle speed, it is rare that a positive pressure is actually applied, but the effect of efficiently taking in oxygen rich air that is not affected by the radiant heat of the engine is large. Read more... This system is designed to promote fuel injection and increase power and torque by increasing the amount of intake air within the A/F (Air/Fuel ratio) correction margin of mass production ECUs. The basic configuration is an intake duct (excluding some car models) that takes in fresh air from the front of the bumper, a large-capacity cleaner box specially designed for the intake path, and a low-resistance K & N wet air filter that can be cleaned with the attached maintenance kit. The intake pipe length and inner diameter are also optimized according to the vehicle type and engine, providing a powerful acceleration from the moment you start stepping on the accelerator. The appearance made of real carbon is also high quality.

	AutoExe Sports Induction Box	Check car compatibility
	Funnel type FRP frame and aluminium heat shield.

	Blitz Carbon Intake System	Check car compatibility
	High performance intake system with carbon duct and case that best fits to engine room by advanced forming technology. Carbon ducts duct case are lightweight, high in strength and even properly control intake air temperature. Duct and Designed to efficiently increase intake air pressure, sharp engine response is achieved. Performance proven stainless steel mesh filter is used, providing supreme inhalation efficiency and intake sound.

	CUSCO Air Intake Duct	Check car compatibility

	Garage Vary Bumper Duct	Check car compatibility

	Garage Vary Intake Ram Deca Duct	Check car compatibility

	Garage Vary Ram System	Check car compatibility

	HKS Air Intake Duct	Check car compatibility
	Using material thicker than standard, the HKS Air Intake Duct achieves smooth (low resistance) air intake as it does not distort like the the standard item.

	HKS Carbon Air Cleaner Inlet	Check car compatibility
	Intake system that combines the uses the standard air cleaner box (with modifications) with add carbon ducts and a dedicated carbon air guide.

	HKS Carbon Intake Duct	Check car compatibility

	HKS Cold Air Intake Kit	Check car compatibility

	HKS Kansai Air Duct and In Mani Plate Set	Check car compatibility
	Carbon Air Duct and Carbon Intake Manifold Plate Set.

	HKS Kansai Air Duct Set	Check car compatibility

	HKS Kansai Carbon Air Duct	Check car compatibility

	HKS Kansai Carbon Air Duct and Cooling Panel	Check car compatibility

	HKS Kansai Carbon In Mani Plate	Check car compatibility
	Carbon Intake Manifold Plate.

	HKS Kansai Racing Suction R and Carbon Air Duct Set	Check car compatibility
	HKS Racing Suction Kit and Carbon Air Duct Set.

	JUN Carbon Air Intake Box	Check car compatibility
	Replaces standard air filter box. Takes cool air from in front of radiator (using standard duct) and sends it to the engine efficiently, all while being isolated from engine bay heat. Utilises larger air flow meter adapter. Requires ECU tune after installation due to changes in air flow around the standard air flow meter.

	KNIGHT SPORTS Air Groove for V-Mount	Check car compatibility
	Intake kit for Knight Sports V-Mount Intercooler and Radiator Kit.

	KNIGHT SPORTS Super Intake System Air Groove	Check car compatibility
	Replaces standard air box for drastically lowered intake air temperatures and increased power. FRP.

	LAILE Beatrush Air Cleaner Box	Check car compatibility

	LAILE Beatrush Air Cleaner Box Lid	Check car compatibility

	LAILE Beatrush Air Intake Duct	Check car compatibility
	Efficiently leads fresh air flowing from the front under grille to the air cleaner box. Larger openings have less air resistance than the standard item. Full bolt on installation.

	LAILE Beatrush Intake Kit	Check car compatibility
	Greatly reduces intake air temperature. Increased diameter and shape of suction pipe raises both power and torque across the entire rev range, greatly increase engine response.

	LAILE Beatrush Suction Pipe Kit	Check car compatibility

	Mazdaspeed Air Box (Carbon)	Check car compatibility

	Mine's Carbon Air Filter Duct	Check car compatibility

	Mine's Carbon Air Intake Duct	Check car compatibility
	The area of the inlet port has been expanded compared to the standard item and the internal volume of the duct has been made as large as possible. Made of lightweight dry carbon, and the surface is painted with matte clear. Installation is basically bolt-on, but please note that if after market parts adjacent to the duct interferes with it, clearance modifications will be required.

	Monster Sport Air Cleaner Kit	Check car compatibility

	Monster Sport Air Induction Box 2	Check car compatibility
	Induction box designed to deliver air efficiently to Monster Sport Air Clerner COMPE (Sold separately).

	Monster Sport MSE Carbon Air Induction Box	Check car compatibility
	Induction box designed to deliver air efficiently to Monster Sport Air Cleaner COMPE (Sold separately).

	Monster Sport Front Bumper Air Duct	Check car compatibility
	For use with Monster Sport Air Induction Box and Air Cleaner COMPE.

	Monster Sport Intake Duct	Check car compatibility
	Carbon. For use with standard air cleaner setup.

	Monster Sport PFX Air Cleaner Kit	Check car compatibility

	Monster Sport PFX Intake Kit	Check car compatibility
	Decreased intake resistance, improved dust collection efficiency and lower intake air temperature, result in strong power feeling and excellent throttle response.

	Monster Sport Power Filter PFX400	Check car compatibility
	Replacement filter for PFX400 equipped Monster Sport PFX Intake Kits. -212100-0400M

	Monster Sport Super Intake Kit 300 Type-2	Check car compatibility
	Monster Sport PFX300 Intake Kit Type 2 and Carbon Shroud set.

	MUGEN Air Cleaner and Box Kit	Check car compatibility
	High Performance Air Cleaner and Box Kit

	MUGEN Air Filter Element	Check car compatibility
	Replacement air filter element for use with MUGEN Air Cleaner and Box Kit.

	NISMO R-tune Air Cleaner Duct	Check car compatibility

	PROVA Carbon Intake Duct	Check car compatibility
	Carbon fiber/fiberglass intake duct replaces the OEM unit and features a wider inlet and smoother internal features for improved airflow. As it uses the same mounting points as the original unit, installation is simple. The beautiful carbon fiber also serves as an accent to any performance engine bay.

	PROVA Cold-Flow Intake Box	Check car compatibility
	Cold-flow Intake Air Box replaces the OEM unit, allows for colder and smoother air flow to engine for improved performance. It is a large capacity box-shaped filter case integrating filter case and resonator. The opening is also provided inside the fender. Realize sporty engine sound and response. As it uses the same mounting points as the original unit, installation is easy.

	Rasty VR Ram Box	Check car compatibility
	Air filter induction box suitable for use with HKS Racing Suction (Sold separately).

	REIMAX Air Intake System	Check car compatibility
	Air inlet pipe and air cleaner box. As used in 600+HP Group A race cars for an approx 20PS power increase.

	REIMAX Original Air Intake	Check car compatibility
	Carbon. Duct entry size maximised (clearances minimised) to allow the most amount of fresh air.

	Revolution Carbon Induction Box	Check car compatibility
	Carbon air intake kit developed with GruppeM. According to Revolution's in-vehicle data, the 86/BRZ is sensitive to intake temperature changes (0.7HP per degree %deg;C). It is necessary to actively take in cool air so that is not affected by the heat in the engine room, so intake duct is situated inside the bumper. Read more... The box capacity is maximized, with the larger than standard size air filter made by K&N. A 70mm air flow adapter and air funnel are also included, which when used in conjunction with the Revolution Big Throttle 70 Kit (Sold separately), will demonstrate higher performance.

	SEEKER Air Cleaner Box	Check car compatibility

	SEEKER Air Cleaner Kit	Check car compatibility
	Air filter box and duct kit.

	SEEKER Air Duct	Check car compatibility

	SEEKER Carbon Air Duct	Check car compatibility

	SPOON SPORTS Carbon Air Duct	Check car compatibility

	SPOON SPORTS Engine Fresh Air Duct	Check car compatibility

	SYMS Air Induction Box	Check car compatibility

	SYMS Ram Air Box System	Check car compatibility

	TM-SQUARE Air Intake Kit	Check car compatibility

	TODA High Flow Intake Kit	Check car compatibility
	Improving induction efficiency as well as drawing in colder air and shortening of the induction system have the combined effect of giving a more direct, responsive feel to the engine.

	Top Fuel Intake Duct Kit	Check car compatibility

	Top Fuel Ram Air Duct	Check car compatibility

	TRUST GReddy Direct Air Intake	Check car compatibility

	TRUST GReddy Racing Air Intake	Check car compatibility
	Racing air intake box kit developed in conjunction with piping. Piping connecting the turbos and the intercooler are similar in layout to that used by the group A R32 vehicle. While shutting out the hot air from inside the engine room, efficiency of intake air is properly managed.

	TRUST GReddy Ram Air Duct	Check car compatibility
	Increases air charge (pressure) by efficiently directing intake air.

	Zero Sports Air Intake Scoop	Check car compatibility
	Scoop shape designed to ensure unrestricted suction path. Fresh air is effectively introduced into the intake system by actively taking in incoming air flow. Read more... The increased pressure in the intake system contributes to the improvement of the engine mid-high speed range. Improves inhalation efficiency. Improves engine response.

	Zero Sports Direct Flow System Box	Check car compatibility

	ZERO1000 Power Chamber Type-3D	Check car compatibility
	The power chamber TYPE 3D is completely designed for each model and thoroughly improves the suction efficiency. The real carbon aero form shroud makes the engine room more luxurious.

	ZERO1000 Replacement Filter for Power Chamber Type-3D	Check car compatibility

Back | Back to TOP

Can't find a part or not listed for your model?
Email: [email protected]

Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.

Display Currency	Delivery Destination