|
|
|
Intake...
- Air Filters...
- Blow Off Valves
- Piping
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Interior... - Shift Knobs - Gauge Mounts - Seats - Steering Wheels - Boss Kits
Cooling... - Radiators - Intercoolers - Oil Coolers
Clothing and Accessories...
Due to size/weight restrictions,
oversized items cannot be shipped by EMS.
oversized items cannot be shipped by EMS.
Item discontinued. Stock no longer available.
Full Listing
| Categories: | |
Electronic Parts
 | Apex APEXi EL FC Commander More Info (Engine Management) -415-A030 |  ITEM DETAILS |
| APEXi Power FC (Full Computer) control unit. EL backlit version. For use with APEXi Power FC. If purchasing separately from Power FC, please supply Power FC serial number. | $ 239.74 |
 | Apex APEXi FC Commander More Info (Engine Management) -415-T001 | ITEM DETAILS |
| APEXi Power FC (Full Computer) control unit. For use with APEXi Power FC. If purchasing separately from Power FC, please supply Power FC serial number. | DISCONTINUED |
 | Apex APEXi Power FC More Info (Engine Management) -4E14-T23 | ITEM DETAILS |
| $ 805.47 |
| Apex APEXi Power FC (AP Engineering Special) More Info (Engine Management) -4E14T01Z | ITEM DETAILS |
| DISCONTINUED |
| Apex APEXi Power FC (Special Edition) More Info (Engine Management) -(GL)ELEMAPXPFCSPL18 | ITEM DETAILS |
| Special consignment model. FC Commander not included. | DISCONTINUED |
 | Apex APEXi Power FC Harness (Engine Management) -4E73G011 | ITEM DETAILS |
| Adapter harness. | DISCONTINUED |
| Apex APEXi Power FC Pro Spec.CPU More Info (Engine Management) -4AGE1PRO | ITEM DETAILS |
| For Drag. | DISCONTINUED |
 | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | ITEM DETAILS |
| Super Air Flow Converter II. | DISCONTINUED |
 | Blitz R-FIT (Engine Management) -15120 | ITEM DETAILS |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
 | FIELD One Touch Connector (Engine Management) -CN-16 | ITEM DETAILS |
| ECU extension harness. Install electronic parts without damaging genuine ECU wiring. | DISCONTINUED |
 | TOMEI REYTEC Set (Engine Management) -8150155002 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy E-01 (Engine Management) -15500208 | ITEM DETAILS |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
 | TRUST GReddy e-manage (Engine Management) -15500510 (Old: 15500500) | ITEM DETAILS |
| TRUST Greddy e-manage (Blue). Piggy back engine management system that enables fuel adjustment to effeectively derive power regardless of power, from beginners to high end users. Requires e-manage Harness Kit - Injector and e-manage Harness Kit (Ignition) (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
 | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
| TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
| TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | ITEM DETAILS |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
 | TRUST GReddy e-manage Ultimate More Info (Engine Management) -15500501 | ITEM DETAILS |
| Engine Control Unit Manager ULTIMATE. The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. Requires harness kit (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
 | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
| TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
| TRUST GReddy e-manage Ultimate Universal Harness Kit (Engine Management) -15901500 | ITEM DETAILS |
| Universal harness. For applications where no car specific harness is available. 18P, 14P, 12P connectors and wiring set. | DISCONTINUED |
 | TRUST GReddy e-manage Ultimate Universal Harness Kit Type 2 (Engine Management) -15901510 | ITEM DETAILS |
| Universal harness. For applications where no car specific harness is available. With current reverse flow diode. 18P, 14P, 12P connectors and wiring set. | $ 106.71 |
| TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
| TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | ITEM DETAILS |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
 | TRUST GReddy e-manage Vehicle Specific Harness (Engine Management) -15910903 | ITEM DETAILS |
| Plug and play harness. Injector and ignition harnesses not required when using this product with TRUST e-manage. | DISCONTINUED |
 | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | ITEM DETAILS |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
 | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | ITEM DETAILS |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
 | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | ITEM DETAILS |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
 | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | ITEM DETAILS |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
 | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | ITEM DETAILS |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
| Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | ITEM DETAILS |
| DISCONTINUED |
 | Billion VFC II (Other Controllers) -BVTW-03 | ITEM DETAILS |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
 | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | ITEM DETAILS |
| Variable Fan Controller PRO DD. | DISCONTINUED |
 | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | ITEM DETAILS |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
 | Blitz E-ESC (Other Controllers) -16087 | ITEM DETAILS |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
 | HKS SLD (Other Controllers) -4502-RA002 | ITEM DETAILS |
| Speed Limit Defencer. | $ 73.57 |
 | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | ITEM DETAILS |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
 | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | ITEM DETAILS |
| $ 73.45 |
 | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | ITEM DETAILS |
| $ 115.02 |
 | PIVOT Fan Control Gauge (Other Controllers) -FCG | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | PIVOT Super Temp Controller (Other Controllers) -STC | ITEM DETAILS |
| Fan controller with water or oil temperature display. | DISCONTINUED |
 | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | ITEM DETAILS |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
 | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Relay Kit (Other Controllers) -15901400 | ITEM DETAILS |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
 | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | ITEM DETAILS |
| DISCONTINUED |
| Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | ITEM DETAILS |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
| Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | ITEM DETAILS |
| For use with Okachan Water Temp oC. | DISCONTINUED |
 | Apex APEXi Rev/Speed Meter GP (Performance Meters) -405-A012 | ITEM DETAILS |
| The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. This new aesthetically pleasing model was crafted to match the likes of other highly popular APEXi electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of APEXi's line up. The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km/h b 0 times, user defined Mid Range Acceleration, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For acceleration and timing accuracy.), and Vehicle weight input. One of the most exiting of the new features is the option to utilize the revolutionary APEXi G-Sensor (Sold separately.). The G Sensor allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G on the race track, or used in an array of new features including: Highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, Horse Power Calculation, and Loss Power Calculation. By taking advantage of the optional G Sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel-spin. Using the G Sensor modifies the speed sensor signal, compensating for wheel-spin and producing impeccably accurate acceleration times. | DISCONTINUED |
 | Apex APEXi Rev/Speed Meter GP G-Sensor (Performance Meters) -430-A013 | ITEM DETAILS |
| An added feature to the Rev Speed Meter GP, the G-Sensor unit allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G's on the race track, or used in an array of new features including: highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, horse power calculation, and loss power calculation. By taking advantage of the optional G-sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel spin. The G-sensor modifies the speed sensor signal, compensating for wheel spin and producing impeccably accurate times. For use with APEXi Rev/Speed Meter GP (Sold separately). | DISCONTINUED |
 | Apex APEXi Rev/Speed Meter GP Shift Lamp (Performance Meters) -430-A011 | ITEM DETAILS |
| With the optional shift indicator light, you can easily incorporate shift points into an A'PEXi Rev Speed Meter-GP (Sold separately). | DISCONTINUED |
| ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design Meter Stand (Performance Meters) -01-0106X-L | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design MFD (Performance Meters) -01-0003X-00 | ITEM DETAILS |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
 | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | ITEM DETAILS |
| DISCONTINUED |
 | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz MMD i-Color (Performance Meters) -15062 | ITEM DETAILS |
| Multi Function & Multi Angle Display. | DISCONTINUED |
 | Blitz Power Meter iD III (Performance Meters) -15086 | ITEM DETAILS |
| DISCONTINUED |
 | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | ITEM DETAILS |
| DISCONTINUED |
 | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | ITEM DETAILS |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
| HKS A/F Sensor (Performance Meters) -44999-AK022 | ITEM DETAILS |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
| HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | ITEM DETAILS |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
 | HKS CAC Cute (Performance Meters) -44007-AK002 | ITEM DETAILS |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
 | HKS CAMP (Performance Meters) -4801-SA001 | ITEM DETAILS |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
 | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | ITEM DETAILS |
| DISCONTINUED |
| HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | ITEM DETAILS |
| $ 66.77 |
 | PIVOT Speed Meter X (Performance Meters) -SML-X | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
| PIVOT Speed Meter Z (Performance Meters) -SML-Z | ITEM DETAILS |
| Discontinued. | DISCONTINUED |
 | SARD A/F Device (Performance Meters) -67502 | ITEM DETAILS |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
| SARD A/F Device A/F Sensor (Performance Meters) -67519 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 311.80 |
| SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 112.25 |
| SARD A/F Device Sensor Fitting (Performance Meters) -67517 | ITEM DETAILS |
| Part included with A/F Device (repair part). | $ 17.46 |
 | SARD Analyzer-II (Performance Meters) -67515 | ITEM DETAILS |
| DISCONTINUED |
 | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | ITEM DETAILS |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
 | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | ITEM DETAILS |
| For NA and Turbo. | DISCONTINUED |
 | Blitz ASTT-X (Turbo Timers) -14360 | ITEM DETAILS |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
 | Blitz DTT-DCIV (Turbo Timers) -14369 | ITEM DETAILS |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
 | Blitz DTT-X (Turbo Timers) -14362 | ITEM DETAILS |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
 | Blitz FATT Advance + (Turbo Timers) -15043 | ITEM DETAILS |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
 | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | ITEM DETAILS |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
 | Blitz FATT-DCIV (Turbo Timers) -14368 | ITEM DETAILS |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
 | Blitz FATT-X (Turbo Timers) -14361 | ITEM DETAILS |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
Interior Parts
 | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | FET QRS III (Boss Kits) -FQS005 | ITEM DETAILS |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
 | FET QRS III Steering Plate (Boss Kits) -FQS006 | ITEM DETAILS |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
 | HKB Boss Kit (Boss Kits) -OT-42 | ITEM DETAILS |
| Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 23.36 |
 | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | ITEM DETAILS |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
 | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | ITEM DETAILS |
| $ 16.38 |
 | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | ITEM DETAILS |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
 | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | ITEM DETAILS |
| For use with regular boss kits (sold separately). | DISCONTINUED |
 | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
 | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | ITEM DETAILS |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
 | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
 | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
 | Works Bell Boss Kit (Boss Kits) -521 | ITEM DETAILS |
| Depending on vehicle, normal, airbag, and/or auto cruise types available. Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 44.72 |
 | Works Bell Rapfix Flipper (Boss Kits) -103260 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
 | Works Bell Rapfix GTC (Boss Kits) -103270 | ITEM DETAILS |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
 | Works Bell Rapfix GTC-R (Boss Kits) -103282 | ITEM DETAILS |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
 | Works Bell Rapfix II (Boss Kits) -103030 | ITEM DETAILS |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
 | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | ITEM DETAILS |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
 | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | ITEM DETAILS |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
 | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
 | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | ITEM DETAILS |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
 | Works Bell Rapfix Racing (Boss Kits) -103330 | ITEM DETAILS |
| Steering wheel quick release system for competition cars. | $ 208.50 |
 | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | ITEM DETAILS |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
 | Works Bell Wiring Plate (Boss Kits) -103284 | ITEM DETAILS |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
 | SARD RD-1 (Clusters and Cluster Gauges) -67520 | ITEM DETAILS |
| Racing Display 1. | DISCONTINUED |
 | STACK ST8100 (Clusters and Cluster Gauges) -67000 | ITEM DETAILS |
| DISCONTINUED |
 | STACK ST8130 (Clusters and Cluster Gauges) -67003 | ITEM DETAILS |
| DISCONTINUED |
| STACK ST8130P (Clusters and Cluster Gauges) -67002 | ITEM DETAILS |
| $ 1530.66 |
 | Bee-R Carbon Dashboard Cover (Dashboards) -(GL)INDSBEEAE8601 | ITEM DETAILS |
| $ 471.03 |
 | BRIDE Dress Up Floor Mat (Floor Mats) -FT024A (Old: COROLLA0(1)) | ITEM DETAILS |
| $ 192.43 |
 | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | ITEM DETAILS |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
 | Blitz Meter Holder (Gauge Mounts) -19160 | ITEM DETAILS |
| $ 17.13 |
 | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | ITEM DETAILS |
| On dash type. | $ 118.74 |
 | Defi Fitting Kit (Gauge Mounts) -DF05301 | ITEM DETAILS |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
 | HKS Display Stand (Gauge Mounts) -53002-AK001 | ITEM DETAILS |
| $ 11.97 |
| HKS Meter Cap (Gauge Mounts) -53002-AK002 | ITEM DETAILS |
| $ 8.00 |
 | HKS Meter Hood (Gauge Mounts) -5404-SA001 | ITEM DETAILS |
| $ 32.44 |
 | HKS Meter Stand (Gauge Mounts) -5404-SA006 | ITEM DETAILS |
| DISCONTINUED |
 | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | ITEM DETAILS |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
 | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | ITEM DETAILS |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
 | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | ITEM DETAILS |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
 | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | ITEM DETAILS |
| Meter not included. Includes double sided tape. | DISCONTINUED |
 | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | ITEM DETAILS |
| $ 95.49 |
 | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | ITEM DETAILS |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
 | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | ITEM DETAILS |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
 | CUSCO Spin Turn Knob (Hand Brake Accessories) -00B 014 AR | ITEM DETAILS |
| Push button to elminate hand brake lock and pull out to lock. Aluminium. | $ 20.47 |
 | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | ITEM DETAILS |
| $ 507.57 |
 | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | ITEM DETAILS |
| DISCONTINUED |
 | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | ITEM DETAILS |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
 | SARD 4 Point Harness (Harnesses) -80221 | ITEM DETAILS |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
 | SARD 6 Point Harness (Harnesses) -80223 | ITEM DETAILS |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
 | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | ITEM DETAILS |
| $ 29.61 |
 | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | ITEM DETAILS |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
 | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | ITEM DETAILS |
| $ 519.04 |
 | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | ITEM DETAILS |
| $ 110.55 |
 | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | ITEM DETAILS |
| $ 116.22 |
 | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | ITEM DETAILS |
| DISCONTINUED |
 | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
| TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
| TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
 | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | ITEM DETAILS |
| Set of 2. | $ 19.27 |
 | TAKATA FORMULA 6 (Harnesses) -73000-0 | ITEM DETAILS |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
 | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | ITEM DETAILS |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
 | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | ITEM DETAILS |
| 4 point harness. FIA Approved. | DISCONTINUED |
 | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | ITEM DETAILS |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
 | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | ITEM DETAILS |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
 | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | ITEM DETAILS |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
 | TAKATA RACE 2x2 (Harnesses) -94005-0 | ITEM DETAILS |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
 | TAKATA RACE 3x2 (Harnesses) -94004-0 | ITEM DETAILS |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
 | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | ITEM DETAILS |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
 | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | ITEM DETAILS |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
 | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | ITEM DETAILS |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-2 (Harnesses) -72000-0 | ITEM DETAILS |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | ITEM DETAILS |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-3 (Harnesses) -72004-0 | ITEM DETAILS |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | ITEM DETAILS |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
 | TAKATA Shoulder Pads (Harnesses) -SP-301 | ITEM DETAILS |
| Pair. | DISCONTINUED |
 | TAKATA Stress Plate (Harnesses) -STP-01 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | ITEM DETAILS |
| Pair. | $ 21.10 |
 | TRUST GReddy Sports Harness (Harnesses) -16500004 | ITEM DETAILS |
| 4 x 4 point harness. | DISCONTINUED |
 | Bee-R Carbon Door Lining (Interior Linings/Skins) -(GL)INILBEEAE8601 | ITEM DETAILS |
| Interior door cards. | $ 568.04 |
 | Bee-R Carbon Rear Lining (Interior Linings/Skins) -(GL)INILBEEAE8602 | ITEM DETAILS |
| Interior rear lining. | $ 435.76 |
 | J-Blood Carbon Step Plate (Other) -(GL)INOTJBLAE8601 | ITEM DETAILS |
| $ 101.85 |
 | NOBY BOOTH AE86 Clock Bezel (Other) -55478-12040-01 (NOB-709) | ITEM DETAILS |
| Toyota Clock Hole Bezel. | $ 13.61 |
 | OKUYAMA CARBING Driver Foot Rest (Other) -313 004 0 | ITEM DETAILS |
| $ 70.36 |
| OKUYAMA DASH Heel Adjust Plate (Other) -315 004 0 | ITEM DETAILS |
| Driver's side floor plate. RHD vehicles only. | $ 102.26 |
 | OKUYAMA CARBING Passenger Plate More Info (Other) -420 003 0 | ITEM DETAILS |
| 3mm aluminium. Attatched to floor carpet by velcro tape. | $ 110.23 |
 | LAILE Beatrush Driver Foot Rest (Pedals) -S4116DR | ITEM DETAILS |
| In motor sports where intense Gs take place, a firmly, well planted left foot is a necessity. Anodized, drilled aluminium reduces chances of slipping. Pedal: Aluminium. Brackets: Steel. Right hand drive models only. | $ 29.73 |
 | BRIDE FG Type Super Seat Rail (Seat Accessories) -T033FG | ITEM DETAILS |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for RECARO SP-G, SPARCO Prodrive, AAR Racing, Cobra and other full bucket seats within size limits of seat rail. Sliding type. | $ 112.63 |
 | BRIDE FX Type Super Seat Rail (Seat Accessories) -T033FX | ITEM DETAILS |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
 | BRIDE IG Type Super Seat Rail (Seat Accessories) -T033IG | ITEM DETAILS |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for RECARO SP-G, SPARCO Prodrive, AAR Racing, Cobra and other full bucket seats within size limits of seat rail. Aluminium side brackets. Sliding type. | $ 117.84 |
 | BRIDE Import Side Stay (Seat Accessories) -A35NPO | ITEM DETAILS |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
 | BRIDE MO Type Super Seat Rail (Seat Accessories) -T033MO | ITEM DETAILS |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 134.04 |
 | BRIDE RO Type Super Seat Rail (Seat Accessories) -T033RO | ITEM DETAILS |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 120.66 |
 | BRIDE Side Stay (Seat Accessories) -A02NPO | ITEM DETAILS |
| $ 32.31 |
 | BRIDE YO Type Super Seat Rail (Seat Accessories) -T033YO | ITEM DETAILS |
| For use with BRIDE reclinable seats (BRIX, ERGO, XAX, REVS). Super Low Position (maximum -30mm). | DISCONTINUED |
 | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | ITEM DETAILS |
| DISCONTINUED |
 | RECARO Side Protector (Seat Accessories) -7216966 | ITEM DETAILS |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
 | Prodrive Competition Seat (Seats) -55660011 | ITEM DETAILS |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
 | TRD Shift Knob (5 Speed MT) (Shift Knobs) -MS204-00005 | ITEM DETAILS |
| Black leather with red stitching. Centre section aluminium (TRD Logo). For 5 speed models. M12 x 1.25. | DISCONTINUED |
 | TRD Shift Knob (Leather Round) (Shift Knobs) -33504-SP006 | ITEM DETAILS |
| M12 x 1.25. Includes 3 manual shift pattern stickers (1 x 5 speed, 2 x 6 speed). | DISCONTINUED |
 | TRD Shift Knob (Leather) (Shift Knobs) -MS204-00004 (Old: 33504-SP003) | ITEM DETAILS |
| Asymmetric. Black leather with black stitching with internal balance weight. TRD logo plate. For 5 speed models. M12 x 1.25. | $ 54.30 |
 | TRUST GREX Shift Knob (Shift Knobs) -14510501 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Shift Knob A Type More Info (Shift Knobs) -14500571 (GSK-A01) | ITEM DETAILS |
| Height adjustable aluminium shift knob. Includes 5 types of shift pattern sticker. | $ 48.82 |
 | TRUST GREX Type SH Shift Knob (Shift Knobs) -14510530 | ITEM DETAILS |
| Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
 | TRUST GREX Type SL Shift Knob (Shift Knobs) -14510531 | ITEM DETAILS |
| Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
 | C's Short Stroke Shift (Shifter Kits) -110020 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Quick Shift Lever Set (Shifter Kits) -30301-AE802 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Sports Steering Wheel (Steering Wheels) -13530 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
 | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | ITEM DETAILS |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
 | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | ITEM DETAILS |
| D shape steering wheel. | $ 453.53 |
 | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | ITEM DETAILS |
| Round shape steering wheel. | $ 535.42 |
 | MOMO MOD.08 (Steering Wheels) -M-58 | ITEM DETAILS |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
 | Nardi Personal Blitz (Steering Wheels) -P071 | ITEM DETAILS |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
 | Nardi Personal Blitz Leather (Steering Wheels) -P075 | ITEM DETAILS |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
 | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | ITEM DETAILS |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
 | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | ITEM DETAILS |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
 | Nardi Personal Neo Grinta (Steering Wheels) -P024 | ITEM DETAILS |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
 | Nardi Personal Pole Position (Steering Wheels) -P002 | ITEM DETAILS |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
 | Nardi Classic Punching Leather (Steering Wheels) -N005 | ITEM DETAILS |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
 | Nardi Classic Smooth Leather (Steering Wheels) -N111 | ITEM DETAILS |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
 | Nardi Classic Suede Leather (Steering Wheels) -N115 | ITEM DETAILS |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
 | Nardi Personal Trophy (Steering Wheels) -P051 | ITEM DETAILS |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
 | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | ITEM DETAILS |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
 | SARD Steering - D-shape (Steering Wheels) -80219 | ITEM DETAILS |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
 | SARD Steering - Semi Deep (Steering Wheels) -80227 | ITEM DETAILS |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
 | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | ITEM DETAILS |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
 | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | ITEM DETAILS |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
 | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
 | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | ITEM DETAILS |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
 | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | ITEM DETAILS |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
 | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | ITEM DETAILS |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
 | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | ITEM DETAILS |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
Intake Parts
 | Apex APEXi Power Intake Kit More Info (Air Filters) -508-T003 | ITEM DETAILS |
| Air filter with minimal air-flow restriction. Dual funnel filter system minimizes intake turbulence. Vehicle specific kits include adapters and other fitting parts. The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spotsb within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is touble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. | $ 167.55 |
 | HKS Racing Suction (Air Filters) -70020-AT104 | ITEM DETAILS |
| The most powerful intake system carefully designed to fit engine room of a vehicle. HKS Racing Suction pushes air intake system efficiency to the limits. To maximise intake capacity, HKS has carefully revised their HKS Racing Suction Reloaded for each car model, delivering the ultimate intake system to further increase the power. Filters use the new hyper stealth frame, where the opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. | $ 179.52 |
 | HKS Racing Suction Reloaded (Air Filters) -70020-AT008 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Super Power Flow (Air Filters) -70019-AT101 | ITEM DETAILS |
| Infamously known as the "invisible filter", the Super Power Flow Filter has further evolved utilising the new hyper stealth frame. Opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. Vehicle specific kits include adapters and other fitting parts. | $ 94.48 |
 | HKS Super Power Flow Reloaded (Air Filters) -70019-AT010 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy AIRINX B-Type (Air Filters) -12511009 (TY-M009B) | ITEM DETAILS |
| Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | DISCONTINUED |
 | TRUST GReddy AIRINX Kit (Air Filters) -12510651 (TY-M051) | ITEM DETAILS |
| Car specific induction kit using steel net lamination structure air filter that ensures high rigidity and durability, and a special high-performance fiber for greatly improved inhalation efficiency. | $ 136.94 |
 | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Induction Box (Induction Boxes and Ducts) -IDBAE8603 | ITEM DETAILS |
| Includes filter(s). | DISCONTINUED |
 | ARC Super Intake Chamber (Other) -CBAAE8603 | ITEM DETAILS |
| DISCONTINUED |
 | ARC Super Induction Box Replacement Filter (Replacement Filters) -19001-20092 | ITEM DETAILS |
| Replacement filter for ARC Super Induction Box. | $ 58.58 |
Exterior Parts
 | Apex APEXi Super Catalyzer (Catalytic Converters / Straight Pipes) -149-T007 | ITEM DETAILS |
| $ 1159.02 |
 | FUJITSUBO Sports Catalyzer (Catalytic Converters / Straight Pipes) -600-22457 | ITEM DETAILS |
| $ 661.40 |
 | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | ITEM DETAILS |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
 | SARD Sports Catalyzer (Catalytic Converters / Straight Pipes) -89032 | ITEM DETAILS |
| Sports catalytic converter for high power and high response. Vehicle specific models feature either a 200/180cpsi large metal honeycomb structure cell (withstands 1200°C, made in Japan), heat plate (shield) precision welded into a unit designed to replace the standard unit. | $ 481.87 |
 | 5 Zigen Pro Racer Header (Exhaust Manifolds (NA) / Headers) -BTOEX05-P | ITEM DETAILS |
| SUS304. | $ 535.42 |
 | FUJITSUBO EXH+ Heat Shield (Exhaust Manifolds (NA) / Headers) -080-10153 | ITEM DETAILS |
| Distributor heat shield (Distributor heat cover). Helps to protect distributor from exhaust manifold heat. | $ 71.18 |
 | FUJITSUBO Super EX (Exhaust Manifolds (NA) / Headers) -620-22454 | ITEM DETAILS |
| $ 783.28 |
 | Power Craft Exhaust Manifold N2 SPEC (Exhaust Manifolds (NA) / Headers) -P-TO010211 (Old: P-TO010203) | ITEM DETAILS |
| $ 568.17 |
 | Power Craft Exhaust Manifold Tornado SPEC (Exhaust Manifolds (NA) / Headers) -P-TO010205 | ITEM DETAILS |
| $ 738.24 |
 | SILK ROAD Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -1AB-L201 | ITEM DETAILS |
| $ 300.15 |
 | TODA Exhaust Manifold (Exhaust Manifolds (NA) / Headers) -18100-860-002 | ITEM DETAILS |
| $ 1017.29 |
 | 5 Zigen FIREBALL Spec1 (Exhaust Systems (Cat Back)) -FBT-1003 | ITEM DETAILS |
| Inheriting the sound characteristics of 5Zigen Super Lap, tail end and was subjected to heat to create the ideal racing muffler. In a limited field, it demonstrates the pursuit ability. For competition/race use. | $ 330.07 |
 | FUJITSUBO Legalis R (Exhaust Systems (Cat Back)) -750-22454 | ITEM DETAILS |
| Sports muffler that achieves both torque increases in the low to medium rev range, while providing high efficiency in the high rev range. Ideal for standard to lightly modified vehicles. | $ 485.65 |
 | FUJITSUBO POWER Getter (Exhaust Systems (Cat Back)) -150-22457 | ITEM DETAILS |
| $ 482.50 |
 | TRUST GReddy MX Muffler (Exhaust Systems (Cat Back)) -10111510 | ITEM DETAILS |
| Maximum and extreme. The perfect balance of power, noise, and volume. JASMA compliant. | $ 278.73 |
 | TRUST GReddy Power Extreme II Muffler (Exhaust Systems (Cat Back)) -10113040 | ITEM DETAILS |
| High flow at high rpm and increased low rpm torque. Features compact straight silencer. | DISCONTINUED |
 | TRUST GReddy Power Extreme Ti-R Muffler (Exhaust Systems (Cat Back)) -10111056 | ITEM DETAILS |
| $ 604.33 |
 | FUJITSUBO EPU (Exhaust Systems (Full)) -050-22458 | ITEM DETAILS |
| Exhaust Performance Unit. Designed for light to medium tuned vehicles, this system is not a combination of existing FUJITSUBO products, but a new system that has been thoroughly reviewed to eliminate performance loss while maintaining JASMA certification for street use (in Japan). Performance will improve when installed on a standard vehicle, though an ECU tune to maximise performance potential is recommended. | $ 2302.28 |
Cooling Parts
 | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A001 | ITEM DETAILS |
| The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
 | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | ITEM DETAILS |
| DISCONTINUED |
 | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | ITEM DETAILS |
| DISCONTINUED |
 | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | ITEM DETAILS |
| DISCONTINUED |
 | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | ITEM DETAILS |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
 | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | ITEM DETAILS |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
 | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | ITEM DETAILS |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
 | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | ITEM DETAILS |
| $ 13.04 |
 | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | ITEM DETAILS |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
 | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | ITEM DETAILS |
| Universal gear oil cooler kit. | $ 792.41 |
 | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | ITEM DETAILS |
| Universal differential oil cooler kit. | $ 776.35 |
 | Kinokuni Rear Differential Oil Cooler Kit (Differential Oil Coolers) -KDT-001R | ITEM DETAILS |
| $ 655.44 |
 | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | ITEM DETAILS |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
 | HPI Oil Cooler Kit (Standard Type) (Oil Coolers) -HPOC-AE86 | ITEM DETAILS |
| Engine oil cooler kit. Standard type (Oil filter in standard position). | $ 374.79 |
 | TRUST GReddy Oil Cooler Kit (Oil Filter Relocation Type) (Oil Coolers) -12014409 | ITEM DETAILS |
| Oil cooler and filter relocation kit. | DISCONTINUED |
 | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | ITEM DETAILS |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
 | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | ITEM DETAILS |
| 1 piece. | DISCONTINUED |
| ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | ITEM DETAILS |
| 1 piece. | DISCONTINUED |
 | LAILE Beatrush Under Panel (Other) -S51160 | ITEM DETAILS |
| Smooths airflow beneath the car for downforce, while extracting heated air in the engine bay. 2mm aluminium. | $ 101.48 |
 | TRUST Gear Oil Pump (Other) -12004820 | ITEM DETAILS |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
 | TRUST GReddy Oil Element Relocation Kit (Other) -12014900 | ITEM DETAILS |
| Oil filter relocation kit. | $ 151.49 |
 | TRUST GReddy Washer Tank (Other) -13506101 | ITEM DETAILS |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
 | Apex APEXi GT-Spec Radiator Cap (Radiator Caps) -591-A001 | ITEM DETAILS |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
 | CUSCO High Pressure Radiator Cap More Info (Radiator Caps) -00B 050 A13 | ITEM DETAILS |
| 1.3kg/cm2 (Boiling temp: approx 126.5°C. | $ 20.91 |
 | Monster Sport High Pressure Radiator Cap More Info (Radiator Caps) -ZZEC10 | ITEM DETAILS |
| $ 28.35 |
 | SARD High Pressure Radiator Cap (Radiator Caps) -61005 | ITEM DETAILS |
| $ 21.10 |
 | TRD Radiator Cap (Radiator Caps) -16401-SP002 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Radiator Cap (Radiator Caps) -13901002 | ITEM DETAILS |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $ 19.53 |
 | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901000 | ITEM DETAILS |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
 | APP Radiator Hose System (Radiator Pipes and Hoses) -TZ002B-UR | ITEM DETAILS |
| Stainless mesh braided radiator hose. Billet aluminium mechanical clamp fittings. Reduces chances of hose breakage and coolant leaks, especially under harsh operating conditions (high engine rpm etc). | $ 79.75 |
 | Billion Super Solid Coolant Line (Radiator Pipes and Hoses) -BWL-43 | ITEM DETAILS |
| $ 69.10 |
 | HPI Silicon Radiator Hose (Radiator Pipes and Hoses) -HPSRH-AE86BL | ITEM DETAILS |
| Silicon radiator hoses with HPI logo. | $ 74.96 |
 | SAMCO Sport Coolant Hose Kit (Radiator Pipes and Hoses) -40TCS68/C BU | ITEM DETAILS |
| Handmade silicon hoses, trusted in motorsports applications globally. Laminated structure and layered fibres within the silicon boasts outstanding strength, suppressing heat expansion. The material use is more resilient to corrosion and deterioration. Multiple colour options available. | $ 101.92 |
 | TRUST GReddy Aluminium Radiator Pipe (Radiator Pipes and Hoses) -13911200 | ITEM DETAILS |
| Highly durable aluminium radiator pipe that is designed to with water temperature sensor adapter. Pipe diameter and shape is designed to ensure sufficient coolant flow and flow speed. Standard hose swelling caused by heat is avoided enabling more eficient coolant flow. | DISCONTINUED |
 | OKUYAMA CARBING Radiator Cooling Plate (Radiator Shrouds (Hoods)) -421 001 0 | ITEM DETAILS |
| Attached to the upper part of the radiator and the upper part of the front grill, the radiator cooling plate closes the gap between the main radiator body and the front grill. This increases the volume of air flowing through the radiator, increasing cooling efficiency. It also provides an aesthetically pleasing touch to the engine bay. | $ 124.22 |
 | HPI Radiator Evolve (Radiators) -HPARE-AE86 | ITEM DETAILS |
| Aluminium. 2 core (wide tube). | DISCONTINUED |
 | HPI Radiator Evolve Light SH (Radiators) -HPARE-AE86SH | ITEM DETAILS |
| Suitable for street and sports driving applications. Aluminium. | $ 267.71 |
 | KOYO Type-F Radiator (Radiators) -KH010681R | ITEM DETAILS |
| Full aluminium (core and tanks). 2 row 48mm (wide) core (8.6mm tube pitch). The new flasghip model of KOYO racing radiators, it is thinner and lighter, yet maintains the high heat dissipation performance of its predessor (Type-Z). Compared to Type-Z: - Better heat disspation due to improved air pressure loss (Approx 35%. - Approx 1kg lighter (dry weight, and 1.5~2kg lighter (with coolant), depending on model. - Less risk of interference with accessories and peripheral auxiliary equipment due to thinner core. - Lower pressure loss possibly reducing the burden on the radiator cooling fan and increase the air flow rate of the cooling fan. | $ 470.33 |
 | KOYO Type-R Radiator (Radiators) -(011)KA010681 | ITEM DETAILS |
| Copper 3 row core (41 or 49mm wide depending on application). Brass tanks. Named Type-R for "Racing", this radiator type adopts KOYO's 3 row core with excellent thermal conductivity. Suitable for highly tuned engines. | $ 470.33 |
 | KOYO Type-S Radiator (Radiators) -(010)PA010681 | ITEM DETAILS |
| Copper 2 row core (27 or 32mm wide depending on application). Brass tanks. Increased capacity for light tune engines. Easy, bolt on installation (replacing standard radiator), this product represents excellent cost performance. | $ 388.33 |
 | KOYO Type-Z Radiator (Radiators) -(012)KL010681 | ITEM DETAILS |
| Aluminium 2 row 53mm (wide) core. All aluminium type. Top level cooling performance while still being light weight. With heat dissipation up up to 35% greater than standard radiators, it is perfect for high power, full tune engines. | DISCONTINUED |
 | TABATA Radiator R2 (Radiators) -(GL)CLRDTABAE8607 | ITEM DETAILS |
| "RR". Aluminium 2 row (48mm wide) core. | DISCONTINUED |
 | TABATA Radiator R2 with ACT (Radiators) -(GL)CLRDTABAE8608 | ITEM DETAILS |
| "RR". Aluminium 2 row (48mm wide) core with Air Catch Tank. | DISCONTINUED |
| TABATA Radiator S2 (Radiators) -(GL)CLRDTABAE8605 | ITEM DETAILS |
| "SS". Aluminium 2 row (36mm wide) core. | DISCONTINUED |
| TABATA Radiator S2 with ACT (Radiators) -(GL)CLRDTABAE8606 | ITEM DETAILS |
| "SS". Aluminium 2 row (36mm wide) core with Air Catch Tank. | DISCONTINUED |
 | TABATA Radiator TR-236 (Radiators) -(GL)CLRDTABAE8601 | ITEM DETAILS |
| Aluminium 2 row (36mm wide) core. | DISCONTINUED |
 | TABATA Radiator TR-236 with ACT (Radiators) -(GL)CLRDTABAE8602 | ITEM DETAILS |
| Aluminium 2 row (36mm wide) core with Air Catch Tank. | DISCONTINUED |
| TABATA Radiator TR-349 (Radiators) -(GL)CLRDTABAE8603 | ITEM DETAILS |
| Aluminium 3 row (49mm wide) core. | DISCONTINUED |
| TABATA Radiator TR-349 with ACT (Radiators) -(GL)CLRDTABAE8604 | ITEM DETAILS |
| Aluminium 3 row (49mm wide) core with Air Catch Tank. | DISCONTINUED |
 | Techno PRO Spirit 2 Row Radiator (Radiators) -(GL)CLRDTSAE8601 | ITEM DETAILS |
| $ 205.35 |
 | TRUST GReddy Aluminium Radiator TW-R (Radiators) -12013802 | ITEM DETAILS |
| 2 core wide tube design provides the same capacity as conventional 3 core designs. Cooling water capacity is more than twice standard, with greater flow. Weight is kept low due to the all aluminium construction. Suitable for street and circuit use. 1/8PT sensor boss. Polished tanks. | $ 306.13 |
 | SARD Reserve Tank (Reserve Tanks) -29700 | ITEM DETAILS |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
 | Billion Super Thermo (Thermostats) -BST-S05A | ITEM DETAILS |
| Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | $ 46.61 |
 | SARD Cooling Thermo (Thermostats) -19401 | ITEM DETAILS |
| Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | $ 40.00 |
 | TRD Sports Thermostat (Thermostats) -16340-SP000 | ITEM DETAILS |
| DISCONTINUED |
 | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | ITEM DETAILS |
| Universal transmission oil cooler kit. | $ 829.89 |
| Kinokuni Transmission Oil Cooler Kit (Transmission Oil Coolers) -KMT-001R | ITEM DETAILS |
| $ 501.59 |
 | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | ITEM DETAILS |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
 | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | ITEM DETAILS |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
Engine Parts
 | Advance Black Alternator (Alternators) -BA-AE86-Red | ITEM DETAILS |
| High power, low resistance, better cooling. DENSO SC stator coil. Black body, red or blue aluminium pulley. | $ 318.87 |
 | KAMEARI Heavy Duty Bearings (Bearings) -M-KEW-AE92-04 | ITEM DETAILS |
| $ 22.55 |
 | TRD Bearing set, Crankshaft (Bearings) -11701-AE802-01 | ITEM DETAILS |
| DISCONTINUED |
| TRD Bearing, Connecting Rod (Bearings) -13281-AE801-01 x 2 | ITEM DETAILS |
| DISCONTINUED |
 | Apex APEXi STB Heavy Duty Timing Belt (Belts and Chains) -818-T001 | ITEM DETAILS |
| Sports tuning belt. | $ 74.96 |
 | HKS Fine Tune Timing Belt (Belts and Chains) -24999-AT009 | ITEM DETAILS |
| Designed for use with HKS Slide Cam-Pullies (Sold separately), these belts are optimized for each engine type. Ideal for high power/high rpm applications. Designed to allow stable belt extension even when heat expansion occurs in the engine. Correctly shaped belt teeth reduces chances of slipping in high torque engines at lower belt tension, therefore not compromising belt strength. Teeth rubber are made from H-NBR grade rubber for additional strength. * Materials and/or molding method may vary sightly depending on application. | $ 83.78 |
 | Power Enterprise Super Kevlar II Timing Belt (Belts and Chains) -BT111 | ITEM DETAILS |
| Stretch resistant - Maintains long-term performance. Significant improvements against belt tooth failure and cut resistance. Drives camshafts accurately. | $ 92.09 |
 | TODA High Power Timing Belt (Belts and Chains) -06141-4AG-000 | ITEM DETAILS |
| The additional stresses placed on the original OEM timing belt are considerable when using up-rated valve springs and high lift camshafts in more arduous sports driving conditions. These additional stresses lead to, among other things increased stretch degradation resulting in inaccurate valve timing as well as reduced durability. TODA High Power Timing Belts are designed from high quality materials to give improved durability as well as reduced stretch degradation. Compared to standard belts: Resistance to cutting: approx. 3.5~4 times. Heat resistance: approx. 2.5~3 times. Tooth integrity: approx. 3~4 times. Resistance to abrasion: approx. 2.5 ~ 3 times. | $ 86.30 |
 | TOMEI Heavy Duty Timing Belt (Belts and Chains) -154004 | ITEM DETAILS |
| Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more. | $ 74.96 |
 | TOMEI Heavy Duty Timing Belt (Old Version ) (Belts and Chains) -151079 | ITEM DETAILS |
| Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more. | DISCONTINUED |
 | HKS Heavy Duty Valve Springs (Camshaft and Valvetrain Parts) -2201-RT004 | ITEM DETAILS |
$ 74.96 |
 | HKS Shim (Camshaft and Valvetrain Parts) -13755-001158 | ITEM DETAILS |
| $ 6.36 |
 | JUN Strengthened Valve Guide (Camshaft and Valvetrain Parts) -1008M-T005 | ITEM DETAILS |
| Heavy duty racing valve guide set. | $ 156.85 |
 | JUN Titanium Valve Retainers (Type 1) (Camshaft and Valvetrain Parts) -1005M-T001 | ITEM DETAILS |
| $ 267.71 |
 | JUN Titanium Valve Retainers (Type 2) (Camshaft and Valvetrain Parts) -1005M-T201 | ITEM DETAILS |
| Treated surface for better wear resistance. | $ 342.67 |
 | KAMEARI Race Valve Guides (Camshaft and Valvetrain Parts) -(GL)ENVT-KEW-AE86-01 | ITEM DETAILS |
| $ 164.28 |
 | NAPREC Forged Big Valves (Camshaft and Valvetrain Parts) -(GL)ENHPNP4AGE01 | ITEM DETAILS |
| Set of oversized intake and exhaust forged valves. | $ 178.20 |
 | NAPREC Race Valve Guides (Camshaft and Valvetrain Parts) -(GL)ENHPNP4AGE02 | ITEM DETAILS |
| Intake and exhaust set. | $ 187.46 |
 | TODA Heavy Duty Valve Springs (Camshaft and Valvetrain Parts) -14750-4AG-000 | ITEM DETAILS |
| Up rated valve springs. | $ 74.96 |
 | TODA Inner Shim Kit (Camshaft and Valvetrain Parts) -14730-4AG-000 | ITEM DETAILS |
| Outer to inner shim type lifter conversion kit. Removes weight from the moving parts of the valve train, reducing inertia and friction, allowing the engine to rev higher. For high lift camshafts (10.5~12.0mm). | $ 471.17 |
 | TODA Inner Shim Kit B Spec (Camshaft and Valvetrain Parts) -14730-4AG-B00 | ITEM DETAILS |
| Outer to inner shim type lifter conversion kit. Removes weight from the moving parts of the valve train, reducing inertia and friction, allowing the engine to rev higher. For high lift camshafts (10.5~12.0mm). | $ 651.95 |
 | TODA Inner Shim Kit B Spec Upgrade Set (Camshaft and Valvetrain Parts) -14750-4AG-B0S | ITEM DETAILS |
| Upgrade kit for TODA Inner Shim Kit (Sold separately) to Toda Inner Shim Kit B Spec. For high lift camshafts (10.5~12.0mm). | $ 278.42 |
 | TODA Valve Guides (Camshaft and Valvetrain Parts) -12204-4AG-000 x 16 | ITEM DETAILS |
| $ 176.88 |
 | TRD Valve Lifters (Camshaft and Valvetrain Parts) -13751-AE851 x 16 | ITEM DETAILS |
| Group A | DISCONTINUED |
| TRD Valve Spring Retainers (Camshaft and Valvetrain Parts) -13741-AE901 x 16 | ITEM DETAILS |
| Group A | DISCONTINUED |
| TRD Valve Springs (Camshaft and Valvetrain Parts) -90501-AE901 x 16 | ITEM DETAILS |
| Group A | DISCONTINUED |
| TRD Valves (Camshaft and Valvetrain Parts) -13711-AE902 x 8 | ITEM DETAILS |
| Group A - IN | DISCONTINUED |
 | HKS Cam Pulley (Camshaft Pulleys and Sprockets) -22004-AT001 | ITEM DETAILS |
| Review of the materials, shape, and surface treatment, HKS have delivered a lighter, stronger, and more precise evolved cam slide pulley. Using ultra lightweight duralumin (A2014) dramatically improved durability (strength: 50%, hardness: 30%) compared to conventional products. By using duralumin, changes to the design and shape of the pulleys has allowed for further weight reduction (approx 10% in the case of RB pulleys), reducing the burden on the valve train, improving engine response. Wear resistance has been improved by nickel plating the gear portion of the pulleys. Nickel plating of the gear portion of the pulleys improves the surface hardness (Hv hardness: 350->500), greatly improving wear resistance under severe conditions conditions such as using heavy duty timing belts, or when sand/grit gets between the teeth. | $ 90.83 |
 | HKS Cam Pulley (Old) (Camshaft Pulleys and Sprockets) -2204-RT003 | ITEM DETAILS |
| DISCONTINUED |
 | JUN Cam Slide Sprocket (Camshaft Pulleys and Sprockets) -1006M-T002 | ITEM DETAILS |
| Adjust the best valve timing when you change camshaft and/or do engine tuning. Able to correct off valve timing according to resurfacing cylinder head when overhaul. JUN Cam Slide Sprockets have marks for every 4 degrees of crank duration (Majority of applications). | DISCONTINUED |
 | TODA Free Adjusting Cam Pulley (Camshaft Pulleys and Sprockets) -14211-4AG-001 | ITEM DETAILS |
| Lightweight duralumin. | $ 97.63 |
 | TOMEI Adjust Pulley (Camshaft Pulleys and Sprockets) -152015 | ITEM DETAILS |
| Adjustable Cam Gear. | $ 111.30 |
 | HKS Camshaft (Camshafts and Camshaft Kits) -2202-RT093 | ITEM DETAILS |
| DISCONTINUED |
 | TODA High Power Profile Camshaft (Camshafts and Camshaft Kits) -14111-4AG-001 | ITEM DETAILS |
$ 222.35 |
 | TOMEI PROCAM Camshaft (Camshafts and Camshaft Kits) -1493264081 | ITEM DETAILS |
| $ 186.14 |
 | TOMEI PONCAM Camshaft Kit (Camshafts and Camshaft Kits) -143056 | ITEM DETAILS |
| PONCAM Intake and exhaust camshafts. | $ 351.48 |
| TRD Camshaft (Camshafts and Camshaft Kits) -13501-AE801 | ITEM DETAILS |
| DISCONTINUED |
 | TOMEI Forged H-Beam Conrod Kit (Connecting Rods and Parts) -125007 | ITEM DETAILS |
| $ 544.23 |
 | CUSCO Heavy Duty Engine Mounts (Engine Mounts) -116 910 A | ITEM DETAILS |
| Include brackets. | $ 59.78 |
 | CUSCO Transmission Mount (Engine Mounts) -116 912 A | ITEM DETAILS |
| $ 30.99 |
 | MS Alpha RIGID Heavy Duty Rubber Mount (Engine Mounts) - AE-EG1 | ITEM DETAILS |
| Rigid, heavy duty rubber mounts designed for competition use. Suppresses engine, differential, and transmission shake from abrubt accelerator inputs. Changes in engine position are kept to a minimum as the reiforced mounts maintain poper mounting geometry. Made in Japan. | $ 56.31 |
| Toyota Engine Mount (Engine Mounts) -12371-31020 | ITEM DETAILS |
| $ 19.46 |
 | TRD Engine Mount (Engine Mounts) -12361-AE851 x 2 | ITEM DETAILS |
| $ 67.08 |
 | SILK ROAD SECTION Sports Engine Torque Damper (Engine Torque Dampers) -1AB-N08 | ITEM DETAILS |
| The vehicle body and engine are connected with specially developed spring type torque damper (rubber in some vehicle applications), effectively suppressing the shaking of the engine, not fully absorbed by the engine mount(s) alone. The torque damper body has a built-in dedicated spring set to each vehicle type. In addition, the rod end part also adopts a proprietary resin liner, providing durability. * In some applications, significant vibration from the engine will be transmitted to the cabin when using this product. Vehicle specific kits include the damper body, brackets and all other parts required for fitting. Vehicle specific kits have been designed and tested for installation and use on JDM right hand drive models. Standard colours: Chrome/Gun Metallic. Optional colours available (please contact us for options). | $ 119.62 |
 | Blitz Fuel Pump (Fuel Pumps) -31255 | ITEM DETAILS |
| DISCONTINUED |
 | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | ITEM DETAILS |
| DISCONTINUED |
 | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | ITEM DETAILS |
| DISCONTINUED |
| SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | ITEM DETAILS |
| DISCONTINUED |
| SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | ITEM DETAILS |
| DISCONTINUED |
| SARD Fuel Filter (Fuel Pumps) -58254 | ITEM DETAILS |
| $ 4.03 |
 | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | ITEM DETAILS |
| $ 194.32 |
 | SARD Pump Harness Kit (Fuel Pumps) -58253 | ITEM DETAILS |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
 | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | ITEM DETAILS |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
 | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | ITEM DETAILS |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
 | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | ITEM DETAILS |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
 | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | ITEM DETAILS |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
 | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | ITEM DETAILS |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
 | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | ITEM DETAILS |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
 | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | ITEM DETAILS |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
 | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | ITEM DETAILS |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
 | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | ITEM DETAILS |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
 | TOMEI Regulator Adapter More Info (Fuel Regulators) -185106 | ITEM DETAILS |
| For attachment of TOMEI fuel regulators to standard fuel delivery pipe. Fitting type sold separately. | $ 24.19 |
 | TOMEI Regulator Adapter Fitting (Fuel Regulators) -185103 | ITEM DETAILS |
| For use with TOMEI Fuel Regulator Adapter. | $ 11.46 |
 | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | ITEM DETAILS |
| $ 283.46 |
 | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | ITEM DETAILS |
| Mount bracket. | $ 32.88 |
 | Auto Staff Insulation Gasket (Gaskets) -AS-INGK-T5 | ITEM DETAILS |
| Heat insulating gasket that uses a special material to be used between the intake manifold and the engine block. Intake manifold temperature is suppressed, increasing intake efficiency as heat generated from the engine block is not transmitted to the intake manifold as easily. | $ 45.83 |
 | HKS Head Gasket More Info (Gaskets) -2301-RT024 | ITEM DETAILS |
| Head gasket that ensures that contact surface pressure is spread as evenly as possible, adapts quickly to the ever changing gaps that can appear in the contact surface in order to maintain a good seal, with good pressure. | $ 50.90 |
 | KAMEARI Big Exhaust Manifold Gasket (Gaskets) -(GL)ENGSKEW-AE86-18 | ITEM DETAILS |
| $ 25.35 |
 | KAMEARI Metal Head Gasket (Gaskets) -(GL)ENGSKEW-AE86-01 | ITEM DETAILS |
| $ 104.69 |
 | NAPREC Gasket Kit (Gaskets) -(GL)ENGKNAP4AGE4V01 | ITEM DETAILS |
| Engine gasket kit. | $ 104.69 |
 | Real Speed Engineering Metal Head Gasket (Gaskets) -RA4070-TY01A | ITEM DETAILS |
| $ 86.30 |
 | TODA High Stopper Metal Head Gasket More Info (Gaskets) -12251-4AG-006 | ITEM DETAILS |
$ 57.95 |
 | TODA Metal Exhaust Manifold Gasket (Gaskets) -18115-860-000 | ITEM DETAILS |
$ 65.57 |
 | TOMEI Exhaust Manifold Gasket (Gaskets) -131006 | ITEM DETAILS |
| DISCONTINUED |
 | TOMEI Head Gasket (Gaskets) -1373825081 | ITEM DETAILS |
| $ 131.65 |
 | TRD Cylinder Head Gasket (Gaskets) -11115-AE814 | ITEM DETAILS |
$ 50.08 |
 | TODA Distributor Heat Shield Protector (Heat Shields and Heat Wrap (Bandages)) -30100-860-00S | ITEM DETAILS |
| Protects the distributor cap from the heat of the exhaust manifold. | $ 60.79 |
 | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | ITEM DETAILS |
| Voltage stabiliser and earthing system. | DISCONTINUED |
 | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | ITEM DETAILS |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
 | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | ITEM DETAILS |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
 | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | ITEM DETAILS |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
| Nagai Denshi ULTRA M.D.I. Harness (Ignition System Parts) -9529-10 | ITEM DETAILS |
| For connection to M.D.I.-DUAL (Ignition side). | $ 25.20 |
 | Nagai Denshi ULTRA M.D.I.-DUAL (Ignition System Parts) -9850 | ITEM DETAILS |
| Multiple Discharged Dual Spark Ignition System | DISCONTINUED |
 | Nagai Denshi ULTRA M.D.I.-DUAL (Old) (Ignition System Parts) -9950 | ITEM DETAILS |
| Multiple Discharged Dual Spark Ignition System | DISCONTINUED |
 | OKADA Projects Plasma Booster (Ignition System Parts) -SB101200B | ITEM DETAILS |
| High power amplifier which drastically boosts ignition coil current. With an increase in spark current, the ignition process is faster and it also creates a faster burn, thus leading to more horsepower and torque. Complete ignition decreases the incidence of "hot spots" in the combustion chamber and lowers the risk of detonation. Simple installation, only 2 wires on distributor type ignition. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Compatible with OBD-II (On-Board-Diagnostics). | $ 175.74 |
 | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | ITEM DETAILS |
| DISCONTINUED |
 | PIVOT SPARK EARTH (Ignition System Parts) -SES | ITEM DETAILS |
| DISCONTINUED |
 | SARD Magic Box (Ignition System Parts) -62311 | ITEM DETAILS |
| Voltage stabiliser. | DISCONTINUED |
 | SARD Sweeper (Ignition System Parts) -62310 | ITEM DETAILS |
| Voltage stabiliser. | DISCONTINUED |
 | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | ITEM DETAILS |
| DISCONTINUED |
 | HKS 210cc Inector (Injectors) -1402-RT002 | ITEM DETAILS |
| DISCONTINUED |
| HKS 290cc Inector (Injectors) -1402-RT003 | ITEM DETAILS |
| DISCONTINUED |
 | Auto Staff Oil Catch Tank (Oil Breather Tanks) -(GL)ENOCAUSAE8601 | ITEM DETAILS |
| $ 177.00 |
 | CUSCO Oil Catch Tank More Info (Oil Breather Tanks) -116 009 A | ITEM DETAILS |
| Car specific kit. | $ 63.75 |
 | IMPULSE 5 Valve Oil Catch Tank (Oil Breather Tanks) -(GL)ENOCIMUAE8601 | ITEM DETAILS |
| Oil catch tank for AE86 models with 5 valve (20 valve) 4AGE. | $ 182.36 |
 | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | ITEM DETAILS |
| Universal kit. 1000ml. | $ 92.60 |
 | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | ITEM DETAILS |
| Universal kit. | DISCONTINUED |
| TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | ITEM DETAILS |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
 | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | ITEM DETAILS |
| Universal kit. 680ml. | $ 87.24 |
 | Monster Sport Power Filter PFX100 High Performance Oil Filter (Oil Filters) -65SZ | ITEM DETAILS |
| Power Filter PFX100 is a performance filtered derived from engine development engineers after research and development. Oil pressure drop reduced to approx 15% while exhibiting the same high dirt collection performance as a normal filter. It stabilizes the hydraulic pressure even in the harsh sports driving scene and contributes to engine protection. | $ 21.16 |
 | Monster Sport Power Filter Ti-100 (Oil Filters) -65SU | ITEM DETAILS |
| Titanate Fiber Oil Filter. | DISCONTINUED |
 | TRD Sports Oil Filter (Oil Filters) -90915-SP000 | ITEM DETAILS |
| Sports oil filter that always keeps the engine clean even under harsh conditions in the high rotation range. Achieves high filtration efficiency while reducing pressure loss. High engine protection performance with smooth engine oil circulation and excellent impurity capture performance. Features a backup net similar to that used in racing cars prevents deformation and damage of the filter paper, ensuring high durability even under harsh conditions. | $ 26.93 |
 | HKS Oil Pressure U/P Kit (Oil Other) -2499-RT004 | ITEM DETAILS |
| DISCONTINUED |
 | NAPREC Aluminium Oil Pan (Oil Pans (Sumps) and Baffle Plates) -(GL)ENOPNAPAE8601 | ITEM DETAILS |
| DISCONTINUED |
| Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
| Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | ITEM DETAILS |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
 | Billion Racing PS Tank (Other) -BRPS-090 | ITEM DETAILS |
| Power steering fluid tank. | DISCONTINUED |
 | Garage Annex 5 Valve Swap Water Kit (Other) -(GL)ENOTGAAAE8601 | ITEM DETAILS |
| Water kit for AE86 models with 5 valve (20 valve) 4AGE. | $ 463.29 |
 | IMPULSE 5 Valve Swap Water Block Standard Kit (Other) -(GL)ENOTIMUAE8601 | ITEM DETAILS |
| For street. Water kit for AE86 models with 5 valve (20 valve) 4AGE. | $ 374.16 |
 | RS Chita 5 Valve Swap Water Kit (Other) -(GL)ENOTRSCAE8601 | ITEM DETAILS |
| Water kit for AE86 models with 5 valve (20 valve) 4AGE. | $ 262.23 |
 | SS Works Water Line Kit (Other) -(GL)ENOTSSWAE8101 | ITEM DETAILS |
| Suitable for 20V sensors. Suitable for use with power steering and air conditioning. Thermostat relocated (upper) for improved water temp stability. | $ 403.77 |
 | JUN W Series Excellent Piston Kit (Piston Kits and Parts) -1001W-T003 | ITEM DETAILS |
| DISCONTINUED |
 | TODA High Power Profile Piston Kit (Piston Kits and Parts) -13010-4AG-000 | ITEM DETAILS |
| Forged piston kit. | $ 549.90 |
 | TOMEI Forged Piston Kit (Piston Kits and Parts) -1163815012 | ITEM DETAILS |
| Kit includes pistons, piston rings, pins and circlips. | DISCONTINUED |
| TOMEI Forged Piston Kit 4AG Repair Parts (Piston Kits and Parts) -1163815014 | ITEM DETAILS |
| Parts for repair/overhaul of TOMEI Forged Piston Kit. | $ 177.57 |
 | JUN Reinforced Head Bolts (Reinforced Bolts) -1027M-T001 | ITEM DETAILS |
| $ 147.52 |
 | NAPREC Cam Cap Stud Bolt (Reinforced Bolts) -(GL)ENHPNPAE8601 | ITEM DETAILS |
| $ 99.02 |
 | NAPREC Crank Cap Stud Bolt Set (Reinforced Bolts) -(GL)ENHPNPAE8602 | ITEM DETAILS |
| $ 152.44 |
 | TOMEI Crank Cap Ladders (Reinforced Bolts) -193074 | ITEM DETAILS |
| $ 133.85 |
 | TOMEI Head Stud Set (Reinforced Bolts) -193071 | ITEM DETAILS |
| $ 253.22 |
 | TOMEI Main Studs (Reinforced Bolts) -193072 | ITEM DETAILS |
| $ 128.50 |
 | TOMEI Main Studs and Ladder Set (Reinforced Bolts) -193075 | ITEM DETAILS |
| $ 262.35 |
| TRD Heavy Duty Cylinder Head Bolts (Reinforced Bolts) -10108-AE901 x 5 | ITEM DETAILS |
| DISCONTINUED |
 | Nagai Denshi ULTRA Blue Point Plug Wire (Spark Plug Leads) -2163-40 | ITEM DETAILS |
| Ideal for extracting maximum performance from modern spark plugs (iridium etc). Silicone rubber covered cable, boots, and caps (cobalt blue colour), is excellent at withstanding voltage, and heat resistance. The copper core wire features excellent conductivity, and with the three layer structure of silicone core, glass braid (sheath) and silicone rubber cloth (like that featured in the conventional silicone series), these wires can withstand voltages of 150,000 V or more. Matched to modern spark plug characteristics, "Blue point power plug cords" are low resistance cords. Low uniform resistance value of 0.5 KΩ (Less than 1/2 of the conventional Ultra Silicone wires) for each cylinder. These wires also incorporate of line resistance technology (noise prevention device). With the low resistance value of 0.5 kΩ, the winding type noise suppressor (resistance) efficiently cuts noise by the effect of the L (inductance) component. Moreover, by adopting ultra unique proprietary noise suppressor at the end of the plug cord, a uniform resistance value is realized for each cylinder, and by adopting a low resistance value of 0.5 kΩ, the maximum spark energy is supplied without loss. The low resistance value of 0.5 kΩ per cylinder is best matched to plug with R (register) and iridium plugs. | $ 103.78 |
 | Nagai Denshi ULTRA Silicone Power Plug Wire (Spark Plug Leads) -2163-10 | ITEM DETAILS |
| High conductivity copper core wires. Using winding fixed resistors developed for each type of vehicle, these wires extract, and supply the maximum, uniform spark energy for each cylinder regardless of the length of the cord. Winding resistance is set in the boot of both cord terminals, and noise is efficiently eliminated by the noise source. Ultra's original construction method combined with the copper core wire creates a wire with excellent tensile strength. The pure silicone rubber outer cover provides excellent weather resistance and can withstand high voltages, providing durability that often exceeds the life of the car. | $ 85.82 |
 | OS Giken Racing Plug Cords (Spark Plug Leads) -(GL)ENSK-OSG-4AG-01 | ITEM DETAILS |
| $ 202.20 |
 | TRD Spark Plug Cord Set (Spark Plug Leads) -90919-AE851 | ITEM DETAILS |
| The spark plug cord must reliably transmit the high voltage from the ignition coil so that the spark plug can reliably send a spark across its gap. The TRD spark plug cord sets were developed based on the racing use concept - That is, achieve ideal resistance to enable a strong, steady spark, even under harsh conditions. Silicon rubber is used - with its excellent heat and water resistance characteristics. Red - to evoke the TRD image, which makes an even hotter looking engine. | DISCONTINUED |
 | TRUST GReddy Racing Plug (Iridium Tune) More Info (Spark Plugs) -13000066 | ITEM DETAILS |
| These spark plugs are designed standard to highly modified engines. The center electrode on these plugs are iridium alloy, which provide stronger spark even at lower voltage, beneficial for creating power and response. 0.6mm high refraction iridium alloy center electrode. Nickel “project type” ground electrode. NA engines can expect an increase across the rpm range, and turbo engines can expect lower end torque. Sold individually (Single unit). | DISCONTINUED |
 | TRUST GReddy Racing Plug PRO More Info (Spark Plugs) -13000107 | ITEM DETAILS |
| Iridium center electrode and platinum outer electrode. Sold individually (Single unit). | DISCONTINUED |
 | TRUST GReddy Racing Plug PRO (Platinum) More Info (Spark Plugs) -13000118 | ITEM DETAILS |
| Designed to dissipate extra heat created by increased horsepower engines. This plug type has high durability for wide range of high heat conditions. 0.8mm platinum center electrode and nickel outer electrode. Sold individually (Single unit). | $ 19.72 |
 | Harada Shokai Intake Manifold Kit (Throttle Bodies and Intake Parts) -1033 | ITEM DETAILS |
| Intake manifold for use with Solex/Weber and other side draft carburettors (Not included). | DISCONTINUED |
| KAMEARI Fuel Hose (Throttle Bodies and Intake Parts) -(GL)1033-FH | ITEM DETAILS |
| For use with KAMEARI Intake Manifold Kit. | $ 11.21 |
| KAMEARI Intake Manifold Gasket (For Intake Manifold) (Throttle Bodies and Intake Parts) -1033-GK | ITEM DETAILS |
| For use with KAMEARI Intake Manifold Kit. | $ 8.36 |
| KAMEARI Intake Manifold Kit (Throttle Bodies and Intake Parts) -1033 | ITEM DETAILS |
| Intake manifold for use with Solex/Weber and other side draft carburettors (Not included). | DISCONTINUED |
 | NOBY BOOTH AE101 Throttle Induction Box (Throttle Bodies and Intake Parts) -108-A | ITEM DETAILS |
| Induction box assembly. | $ 156.25 |
 | NOBY BOOTH AE101 Throttle Induction Box Set (Throttle Bodies and Intake Parts) -108-B | ITEM DETAILS |
| Induction box assembly, and air cleaner set. | $ 232.46 |
 | OER Sports Injection Kit (Throttle Bodies and Intake Parts) -(GL)ENTB-OER-AE86-01 | ITEM DETAILS |
$ 963.75 |
 | TODA Sports Injection Kit (Throttle Bodies and Intake Parts) -17100-4AG-453 | ITEM DETAILS |
| Quad throttle body kit. An individual throttle for each cylinder. Gives super response, and improvements through out the rev range to both power and torque. | $ 1555.85 |
 | KAMEARI Water Pump (Water Pumps) -WPT-052 | ITEM DETAILS |
| Shaft is attached to the pump body via a bearing, and a spiral impeller is attached to the tip of the shaft. Bearings and mechanical seals are attached to the shaft, allowing for smooth cooling, and preventing water leaks at the same time. Abrasion resistant bearings - Reliable quality bearings that can withstand the constant load from the tension of the fan belt. Corrosion resistant impeller. Water leakage resistant mechanical seals - Durable seals that prevent noise, but also prevent leakage of coolant even while touch the shaft at high rpm. | $ 48.16 |
Drivetrain Parts
 | APP Direct Clutch Line System (Clutch Hoses) -GTC002 | ITEM DETAILS |
| $ 46.23 |
 | TRD Direct Clutch Line (Clutch Hoses) -90947-AE800 | ITEM DETAILS |
| Stainless mesh hose. | DISCONTINUED |
 | OS Giken Super Single (Aluminium Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SSA-OHA | ITEM DETAILS |
| $ 238.73 |
 | OS Giken Super Single (Press Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SS-OHA | ITEM DETAILS |
| $ 238.73 |
 | OS Giken TS2A Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2A-OHA | ITEM DETAILS |
$ 264.56 |
 | OS Giken TS2AS Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2AS-OHA | ITEM DETAILS |
$ 264.56 |
 | OS Giken TS2B Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2B-OHA | ITEM DETAILS |
$ 344.87 |
 | OS Giken TS2BS Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2BS-OHA | ITEM DETAILS |
$ 302.35 |
 | CUSCO Clutch Cover (Clutches) -00C 022 B802 | ITEM DETAILS |
| $ 135.05 |
 | CUSCO Copper Disc (Clutches) -00C 022 R116 | ITEM DETAILS |
| Copper clutch disc. | $ 91.71 |
 | CUSCO Metal Disc (Clutches) -00C 022 C201T | ITEM DETAILS |
| Metal clutch disc. | $ 135.05 |
 | EXEDY Single Sports Series Clutch Cover (Clutches) -TC01T | ITEM DETAILS |
| $ 135.05 |
 | EXEDY Single Sports Series Clutch Disc (Clutches) -TD01H | ITEM DETAILS |
| $ 106.01 |
 | EXEDY Single Sports Series Clutch Set (Clutches) -TK01H | ITEM DETAILS |
| Disc and cover set. Approximately 40% higher clamp load than the standard clutch. | $ 223.80 |
 | EXEDY Hyper CARBON-R (Single) (Clutches) -TH01SBMC | ITEM DETAILS |
| Includes flywheel. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
 | EXEDY Hyper SINGLE (Clutches) -TH01SD | ITEM DETAILS |
| Damper type metal disc. Includes flywheel. Durability is improved with the use of a stronger, smaller damper disc, specifically redesigned for the Hyper Single. A lower level of inertia is achieved over the genuine fitment clutch which improves shift response for faster gear changes. 20 to 30% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 845.96 |
 | JUN Single Sports Clutch Kit (Clutches) -2511M-T005 | ITEM DETAILS |
| Lightweight flywheel, clutch disc and heavy duty clutch cover kit. | $ 439.04 |
 | ORC Light Series ORC-250-Light (Clutches) -ORC-250L-TT0406 | ITEM DETAILS |
| The fun of a manual transmission car is not only higher output and drifting, there is also the pleasure of comfortable operation by the driver. However, until now, the enjoyment of the reinforced clutch was a little different due to being difficult to use. This single plate clutch unit has the same operation feeling as the standard clutch. ORC's Light Clutch series is are clutches that allows the engine to run lightly, maintaining the fun of changing gears while providing good feel in semi engaged conditions. | $ 564.39 |
 | ORC Metal Series ORC-309 (Clutches) -ORC-309D-13T | ITEM DETAILS |
| Single Plate Clutch. ~340N/m(35kgf/m). | $ 559.35 |
 | ORC Carbon Series ORC-309-CC (Clutches) -RC-309CC-13T | ITEM DETAILS |
| Single Plate Carbon Clutch. ~340N/m(35kgf/m). | DISCONTINUED |
 | ORC Racing Series ORC-309-RC (Clutches) -ORC-309D-TT0406-RC | ITEM DETAILS |
| Super light weight (60~70% of standard), highly direct for circuit racing applications. Engine idle stability may be affected in some applications. Single Plate Clutch. | $ 811.31 |
 | OS Giken Release Sleeve Bearing Set (Clutches) -(GL)DTCLOSG-AE86-TS2AS-RSB | ITEM DETAILS |
| $ 41.57 |
 | OS Giken Super Single (Clutches) -(GL)DTCLOSG-AE86-SSP-204 | ITEM DETAILS |
| The Super Single clutch kit was designed to provide power holding performance for your simple bolt on equipped vehicle. This kit should also be able to handle the heat capacity requirements of track and aggressive use. For a balance of performance and longevity, this clutch is ideal for applications with less than 400 lb/ft (540 N/m, 55 kg/m) of torque. | $ 502.91 |
 | OS Giken Racing Carbon TRSB-C (Clutches) -(GL)DTCLOSG-AE86-TRSB-C | ITEM DETAILS |
| Single plate carbon clutch for small capacity, force induced (turbo/supercharged) applications. Aluminium cover. Single plate push type. 204mm carbon disc. | DISCONTINUED |
| OS Giken Racing Carbon TRSSB-C (Clutches) -(GL)DTCLOSG-AE86-TRRSB-C | ITEM DETAILS |
| Single plate carbon clutch for high response, naturally aspirated applications. Aluminium cover. Single plate push type. 204mm carbon disc. | DISCONTINUED |
 | OS Giken TS2A More Info (Clutches) -(GL)DTCLOSG-AE86-TS2A | ITEM DETAILS |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. 184mm discs. For applications with less than 400 lb/ft (540 N/m, 55 kg/m) of torque. | $ 628.33 |
 | OS Giken TS2AS More Info (Clutches) -(GL)DTCLOSG-AE86-TS2AS | ITEM DETAILS |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. 184mm discs. Single type diaphragm spring (Low pressure). 6,700N/m (690kgf/m). | $ 604.70 |
 | OS Giken TS2B More Info (Clutches) -(GL)DTCLOSG-AE86-TS2B | ITEM DETAILS |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. 204mm discs. 9,800N/m (1,000kgf/m). For applications with less than 550 lb/ft (745 N/m, 76 kg/m) of torque. | $ 760.60 |
 | OS Giken TS2BS More Info (Clutches) -(GL)DTCLOSG-AE86-TS2BS | ITEM DETAILS |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. 204mm discs. Single type diaphragm spring (Low pressure). 6,700N/m (690kgf/m). | $ 661.40 |
 | TODA Heavy Duty Clutch Cover (Clutches) -22300-4AG-200 | ITEM DETAILS |
| $ 171.71 |
| TODA Metal Clutch Disc (Clutches) -22200-4AG-00M | ITEM DETAILS |
| $ 138.14 |
| TODA Non Asbestos Clutch Disc (Clutches) -22200-4AG-01N | ITEM DETAILS |
| $ 106.01 |
 | TODA Sports Clutch Kit (Metal Disc) - Balanced (Clutches) -26000-4AG-00M | ITEM DETAILS |
| Lightweight chromoly flywheel, clutch disc and heavy duty clutch cover (Balanced). | $ 547.26 |
 | TODA Sports Clutch Kit (Non Asbestos) - Balanced (Clutches) -26000-4AG-01N | ITEM DETAILS |
| Lightweight chromoly flywheel, clutch disc and heavy duty clutch cover (Balanced). | $ 517.02 |
 | TRD Clutch Cover (Clutches) -31210-NP111 | ITEM DETAILS |
| This clutch cover provides you the optimal clutch performance with either metal type or robust sports facing type discs. Complete your clutch tuning with a high-performance discs (Sold separately) and cover set. | DISCONTINUED |
 | TRD Clutch Disc (Metal Facing Type) (Clutches) -31250-TA462 | ITEM DETAILS |
| TRD metal clutch discs were specially developed to handle the harsh use demanded particularly by hard motor sports racing and high-output engines. The plate employs reinforced bolts and springs, and the facing uses a special alloy pad that exhibits high anti-wear characteristics. | DISCONTINUED |
 | TRD Clutch Disc (Sports Facing Type) (Clutches) -31250-AE853 | ITEM DETAILS |
| With its reinforced plate and a facing pad that boasts outstanding durability, the TRD sports facing clutch disc is a truly amazing clutch disc that exhibits stable operation and feel even when used under intense clutch work or for long periods of time. It can be used for purposes ranging from gymkhana driving, with its demands for miraculous clutch work, to street and motor sports racing. | $ 106.77 |
| TRD Drive Pinion Bearing Spacer (Differential Overhaul Kits and Parts) -41231-TA002 | ITEM DETAILS |
| DISCONTINUED |
| TRD Toyota Drive Pinion Gear Preload Adjustment Shim (Differential Overhaul Kits and Parts) -90564-TA001 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Repair Kit (Differential Overhaul Kits and Parts) -40107-TA003 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Shim (Differential Overhaul Kits and Parts) -40101-TA411 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO LSD Initial Torque Check Tool (SST) (Differential Parts) -LSD SST 01 | ITEM DETAILS |
| Limited slip differential initial torque check tool. Pricing for 1 unit (2 required for use). | $ 48.19 |
 | CUSCO LSD Type MZ More Info (Differentials) -LSD 130 E | ITEM DETAILS |
| LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 554.31 |
 | CUSCO LSD Type RS More Info (Differentials) -LSD 130 F | ITEM DETAILS |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 554.31 |
 | KAAZ LSD (Differentials) -DBT1630 | ITEM DETAILS |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 610.06 |
 | KAAZ LSD Super Q (Differentials) -DBT1630SQ | ITEM DETAILS |
| Quiet locking performance featuring WPC treated clutch plates. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 674.31 |
 | TOMEI TECHNICAL TRAX ADVANCE LSD (Differentials) -562034 | ITEM DETAILS |
| 2 Way LSD that locks very well when ON or OFF throttle. T-TRAX ADVANCE has several advantages over similar mechanical limited slip differentials from other manufacturers. It features optimized cam angles, spring discs, larger surface area clutch discs and a higher initial torque setting. These all translate to improved corner entry, more precise driving, better corner exit traction as well as quicker response through successive corners. T-TRAX ADVANCE offers superior performance in every way. | $ 680.29 |
 | TRD Mechanical LSD (Differentials) -41301-TA005 | ITEM DETAILS |
| Limited slip capacity is provided using a number of clutch plates, it exhibits a direct, reliable LSD effect. | DISCONTINUED |
 | CUSCO Final Gear (Final Drive Gears) -116 029 A51 | ITEM DETAILS |
$ 1166.89 |
 | Revolver Final Gear Set (Final Drive Gears) -(GL)DTFG-REV-AE86-05 | ITEM DETAILS |
| $ 458.57 |
 | Techno PRO Spirit Final Gear (Final Drive Gears) -(GL)DTDPTSAE8604 | ITEM DETAILS |
| Includes oil seal and nut spacer. | $ 388.02 |
 | TRD Final Gear Set (Final Drive Gears) -41201-AE851 | ITEM DETAILS |
| DISCONTINUED |
 | TOMEI Reinforced Flywheel Bolt Set (Flywheel Bolts) -193070 | ITEM DETAILS |
| The vibrations from the crankshaft that occurs with the sudden engagement of the clutch at high RPM are transmitted to the flywheel. The flywheel bolts cannot withstand the vibrations from the flywheel in which can cause the bolts to loosen or break. These TOMEI flywheel bolts are made from high intensity forged material of 19000psi (1336kgf/cm2 and especially heat treated) its tensile strength greatly exceeds the factory genuine bolts. | $ 49.76 |
 | JUN Light Weight Flywheel (STD) (Flywheels) -2001M-T005 | ITEM DETAILS |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $ 246.29 |
 | JUN Light Weight Ultralight Flywheel (HS) (Flywheels) -2010M-T005 | ITEM DETAILS |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $ 294.48 |
 | KAMEARI Super Lightweight Chromoly Flywheel (STD) (Flywheels) -(GL)DTFWKEWAE8601 | ITEM DETAILS |
| Street use. SCM435 Chromoly steel. | $ 283.46 |
 | ORC Light Weight Flywheel (Flywheels) -ORC-010-04T | ITEM DETAILS |
| SCM435 Chromoly steel. | DISCONTINUED |
 | SILK ROAD Chromoly Light Weight Flywheel (Flywheels) -FW04 | ITEM DETAILS |
| Light weight, direct replacement flywheel made from chromoly steel. Suitable for use with standard clutch disc and cover. | $ 247.36 |
| TODA Ultra Light Weight CrMo Flywheel (Flywheels) -22100-4AG-000 | ITEM DETAILS |
| Lightweight chromoly steel flywheel. | $ 271.49 |
 | CUSCO Close Ratio Gear Set (Gearboxes and Gear Sets) -116 028 AA | ITEM DETAILS |
| Designed to fit standard gearbox cases, the close ratio gear set is ideal for keeping the power and torque band at its most effective region. Close ratio gears prevents engine revolution drop during up-shifting to keep the rpm in the optimal range. Combined with the appropriate final gear (sold separately, not available for all applications), this is a powerful modification that enables the drive to extract the full potential of the engine. | $ 1729.39 |
 | Dewpoint Adelia Close Ratio Mission (Gearboxes and Gear Sets) -0080-TT500 | ITEM DETAILS |
| $ 1669.86 |
 | Revolver Close Gear Set (Gearboxes and Gear Sets) -(GL)DTGSREVAE8601 | ITEM DETAILS |
| Close ratio gear set. Brings each gear closer together, reducing the drop in engine revolutions between shift changes, keeping you in the power band. Almost essential to extract performance in applications where the power band has been shifted to high engine revolution ranges. | $ 1868.60 |
 | Revolver Over Top Gear (Gearboxes and Gear Sets) -(GL)DTGSREVAE8609 | ITEM DETAILS |
| Suppresses rpm at high speeds when using a short final gear or close gear set. | $ 260.97 |
 | Revolver Reverse Gear (Gearboxes and Gear Sets) -(GL)DTGSREVAE8607 | ITEM DETAILS |
| $ 251.52 |
| Revolver Second Gear (Gearboxes and Gear Sets) -(GL)DTGSREVAE8608 | ITEM DETAILS |
| $ 251.52 |
 | Takata Techno Service 5th Gear (Gearboxes and Gear Sets) -MX08-3653 + MX08-3654 | ITEM DETAILS |
| $ 372.90 |
 | Takata Techno Service Close Mission (Gearboxes and Gear Sets) -(GL)DTGSTTSAE8601 | ITEM DETAILS |
| Close ratio gear set. | $ 779.82 |
 | Takata Techno Service Dog Mission (Gearboxes and Gear Sets) -(GL)DTGSTTSAE8604 | ITEM DETAILS |
| $ 1984.18 |
 | Takata Techno Service Heavy Duty 3rd Gear (Gearboxes and Gear Sets) -MX12-3088 | ITEM DETAILS |
| $ 146.70 |
 | TRD Close Ratio Transmission Gear Set (Gearboxes and Gear Sets) -33030-AE811 | ITEM DETAILS |
| The gear ratio is changed for sports driving, such as motor sports and circuit racing. Torque band utilization can be maximized by optimizing the step ratio (linkage ratio) for sports driving, to deliver the most power from your engine. | DISCONTINUED |
 | CUSCO Shift Lever Collar (Other) -116 940 A | ITEM DETAILS |
| $ 20.41 |
Suspension Parts
 | CUSCO Stabiliser Bar More Info (Anti Roll (Sway/Stabiliser) Bars) -116 311 A23 | ITEM DETAILS |
| Sway bar replaces the factory bar and uses the factory mounting locations (if equipped). The CUSCO anti-sway bar will dramatically reduce body roll since its stiffness is greater than the factory bar or if the vehicle is not equipped with one. The larger diameter and steel strength bar give the CUSCO bar more resistance against torsion, which helps keep the vehicle stabilized during cornering and reduces weight transfer. | $ 161.57 |
 | OKUYAMA Front Pipe Stabiliser (Anti Roll (Sway/Stabiliser) Bars) -120 004 0 | ITEM DETAILS |
| $ 225.63 |
| OKUYAMA Rear Pipe Stabiliser (Anti Roll (Sway/Stabiliser) Bars) -121 004 0 | ITEM DETAILS |
| $ 282.32 |
 | TRD Stabiliser Bar Set (Anti Roll (Sway/Stabiliser) Bars) -48810-AE800 | ITEM DETAILS |
| DISCONTINUED |
 | CUSCO BCS More Info (Brake Cylinder Stoppers) -116 561 A | ITEM DETAILS |
| Brake cylinder stopper (BCS). Suppresses bulkhead deflection that occurs when applying brakes by reinforcing the brake master cylinder. Provides for more direct braking feel. For right hand drive models. | $ 65.82 |
 | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | ITEM DETAILS |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
 | APP Brake Line System (Brake Lines) -TB002B-ST | ITEM DETAILS |
| $ 121.00 |
 | ENDLESS Brake Lines (Swivel Racing Type) (Brake Lines) -EB202 | ITEM DETAILS |
| Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $ 196.53 |
 | ENDLESS Brake Lines (Swivel Steel Type) (Brake Lines) -EB202SS | ITEM DETAILS |
| Steel and stainless construction ensures durability and excellent reliability. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: Carbon Steel. Socket: Stainless. | $ 131.02 |
 | ENDLESS CC-A (Brake Pads) -EP067CCA | ITEM DETAILS |
| Street. Ceramic Carbon Metal. 50~480°C. Average friction coefficient: 0.38~0.45. | $ 87.24 |
 | ENDLESS CC-R (Brake Pads) -EP067CCR | ITEM DETAILS |
| Winding road/circuit. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | DISCONTINUED |
 | ENDLESS CC-Rg (Brake Pads) -EP067CRG2 | ITEM DETAILS |
| Winding road/circuit. UPDATED compound for 2017 - lower starting heat range and higher brake friction. Material: Ceramic Carbon Metal. Brake rotor operating temperature: 50~800°C. Average friction coefficient: 0.38~0.45. Previous specifications: Material: Ceramic Carbon Metal. Brake rotor operating temperature: 150~800°C. Average friction coefficient: 0.35~0.42. | $ 121.57 |
 | ENDLESS CC-X (Brake Pads) -EP067CCX | ITEM DETAILS |
| Winding road/circuit. Ceramic Carbon Metal. 50~700°C. Average friction coefficient: 0.38~0.50. | DISCONTINUED |
 | ENDLESS MX72 (Brake Pads) -EP067MX72 | ITEM DETAILS |
| Winding road/circuit. Material: Semi Metallic (Ceramic Carbon Metal). Brake rotor operating temperature: 50~700°C. Average friction coefficient: 0.37~0.47. | $ 127.87 |
 | ENDLESS NEW Type R (Brake Pads) -EP067TRN | ITEM DETAILS |
| Winding road/circuit. Material: Low steel. Brake rotor operating temperature: 50~650°C. Average friction coefficient: 0.30~0.35. Ideal tyre: radial/high grip radial. | $ 88.82 |
 | ENDLESS NS97 (Brake Pads) -EP067NS97 | ITEM DETAILS |
| Street. Low steel (non-asbestos). 0~500°C. Average friction coefficient: 0.37~0.43. | DISCONTINUED |
 | ENDLESS SNP (Brake Pads) -EP067SNP | ITEM DETAILS |
| Street. NAO compound (Non-Asbestos-Organic). 0~400°C. Average friction coefficient: 0.35~0.41. | DISCONTINUED |
 | ENDLESS SSM (Brake Pads) -EP067SSM | ITEM DETAILS |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | $ 101.10 |
 | ENDLESS SSY (Brake Pads) -EP067SY2 | ITEM DETAILS |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
 | ENDLESS Type R (Brake Pads) -EP067TR | ITEM DETAILS |
| Winding road/circuit. Material: Non asbestos. Brake rotor operating temperature: 0~650°C. Average friction coefficient: 0.35~0.44. | DISCONTINUED |
 | Project μ (Mu) B-SPEC (Brake Pads) -F186-BSP | ITEM DETAILS |
| Street Sports. Reliable braking power and fade resistance suitable for sports driving, all at a reasonable price. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 75.02 |
 | Project μ (Mu) BESTOP (Brake Pads) -F186-BESTOP | ITEM DETAILS |
| Genuine type. Asbestos free. 0~380°C. Friction coefficient: 0.30~0.38. | DISCONTINUED |
 | Project μ (Mu) BOOM WAGON (Brake Pads) -F186-BoomWagon | ITEM DETAILS |
| A standard model that compensates for shortages in braking force and provides stable performance. Street. Non steel. 0~450°C. Friction coefficient: 0.36~0.43. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | DISCONTINUED |
 | Project μ (Mu) CLUBMAN SINTERED (Brake Pads) -F186-ClubmanSintered | ITEM DETAILS |
| Circuit Race. Ideal for clubman racing or amateur endurance racing. Designed for high durability and heat resistance experienced during high load circuit racing. Material: Super alloy sintered. Temperature range: 350~1000°C. Friction coefficient: 0.28~0.35. | DISCONTINUED |
 | Project μ (Mu) COMP-B for Gymkhana (Brake Pads) -F186 GYM | ITEM DETAILS |
| Compound dedicated to the gymkhana competition, pursuing the pleasure of freely controlling the vehicle. Competition. Carbon metal. Front: 0~450°C. Friction coefficient: 0.38~0.49. Rear: 0~400°C. Friction coefficient: 0.48~0.60. | DISCONTINUED |
 | Project μ (Mu) D1 Spec (Brake Pads) -R186-D1SP | ITEM DETAILS |
| Competition. Asbestos free. 0~380°C. Friction coefficient: 0.50~0.55. | $ 56.12 |
 | Project μ (Mu) D1 Spec EXTREME (Brake Pads) -R186-D1EX | ITEM DETAILS |
| Competition. Carbon metal. 50~550°C. Friction coefficient: 0.48~0.59. | $ 75.02 |
 | Project μ (Mu) D1 Spec F (Brake Pads) -F186-D1SpecF | ITEM DETAILS |
| Maximised controllability during drift, with this specialised model designed for front brakes. Through reduced effect temperature to pedal touch, these pads deliver more linear performance, resulting in greater brake control. Competition. Super Graphite Metallic. 0~550°C. Friction coefficient: 0.29~0.34. | DISCONTINUED |
 | Project μ (Mu) D1 Spec ZERO (Brake Pads) -F186-D1Z | ITEM DETAILS |
| Achieves brake control according to pedaling force by reducing changes in effectiveness and touch with respect to temperature. A low mu model that specializes in controllability in extreme conditions during drifting. Competition. Super Graphite Metallic. 0~550°C. Friction coefficient: 0.27~0.34. | $ 75.02 |
 | Project μ (Mu) HC CS18 (Brake Pads) -F186-CS18 | ITEM DETAILS |
| Hyper Carbon CS18. Sports model specialized in pedal control performance. By lowering the initial bite of the HC M1, outstanding pedal control performance and fade resistance are achieved. This compound is suited to electronic control devices and ABS intervention characteristics. Street Sports. Super graphite metallic. 50~700°C. Friction coefficient: 0.35~0.45. | $ 122.26 |
 | Project μ (Mu) NS-C (Brake Pads) -F186-NSC | ITEM DETAILS |
| Street. Non steel. 0~400°C. Friction coefficient: 0.34~0.38. Ideal for radial street tyres and vehicles with wheels larger than standard. Low noise and dust. | $ 65.57 |
 | Project μ (Mu) RACING 777 (Brake Pads) -F186-R777 | ITEM DETAILS |
| Circuit Race. Carbon metal. 300~800°C. Friction coefficient: 0.40~0.55. | $ 122.26 |
 | Project μ (Mu) RACING 999 (Brake Pads) -F186-R999 | ITEM DETAILS |
| Circuit Race. Carbon metal. 200~800°C. Friction coefficient: 0.42~0.59. | $ 122.26 |
 | Project μ (Mu) RACING-N+ (Brake Pads) -F186-RNPL | ITEM DETAILS |
| Circuit Race. Super Graphite Metallic. 100~800°C. Friction coefficient: 0.39~0.48. | $ 112.82 |
 | Project μ (Mu) RACING-N1 (Brake Pads) -F186-RN1 | ITEM DETAILS |
| Circuit Race. Carbon metal. 100~800°C. Friction coefficient: 0.33~0.45. | $ 112.82 |
 | Project μ (Mu) Sports Rear SHOE (Brake Pads) -S186-SportsRearShoe | ITEM DETAILS |
| Excellent braking power and controllability, for street runs to circuit racing.. Brake shoes. Non asbestos. 0~400°C. | $ 70.30 |
 | Project μ (Mu) Type HC-CS (Brake Pads) -F186-CS | ITEM DETAILS |
| Hyper Carbon - Circuit Spec. Street Sports. Carbon metal. 50~800°C. Friction coefficient: 0.41~0.50. | $ 112.82 |
 | Project μ (Mu) Type HC-M1 (Brake Pads) -F186-M1 | ITEM DETAILS |
| Hyper Carbon M1. The flagship model of the HC series that covers everything from city driving to sports driving. In addition to the linear effect of the pedal control, it exhibits outstanding and stable braking power in the high temperature range. These pads have been finished with specifications that suppress dust as much as possible among graphite metal materials. Street Sports. Super graphite metallic. 50~800°C. Friction coefficient: 0.41~0.55. | $ 122.26 |
 | Project μ (Mu) Type HC+ (Brake Pads) -F186-HCPL | ITEM DETAILS |
| Hyper Carbon Plus. Street Sports. Carbon metal. 0~800°C. Friction coefficient: 0.43~0.58. | $ 112.82 |
 | Project μ (Mu) Type NS (Brake Pads) -F186-NS | ITEM DETAILS |
| Street. Asbestos free. 0~400°C. Friction coefficient: 0.37~0.42. | DISCONTINUED |
 | Project μ (Mu) Type PS (Brake Pads) -F186-PS | ITEM DETAILS |
| Street Sports. Perfect Spec. Providing adequate braking power for street sports driving, while also being low dust and noise. Brake pedal feel and control performance are high across a wide range of light to heavy vehicle applications. Material: Super graphite metallic. Temperature range: 0~500°C. Friction coefficient: 0.32~0.45. | $ 98.64 |
 | DIXCEL FCR FP Disc Rotor (Brake Rotors) -FP 311 2730 S | ITEM DETAILS |
| Stronger type plain disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). | $ 125.10 |
 | DIXCEL FCR FS Disc Rotor More Info (Brake Rotors) -FS 311 2730 S | ITEM DETAILS |
| Stronger type slit (6) disc rotors with 20% increased carbon content. Heat treated for stable strength after repeated expansion/contraction. Improved distortion and crack resistance. Flexible surface hardness improves biting of pads. Excellent compatibility with various compounds. Brake squeal suppressed through excellent damping characteristics. Anti rust (special heat resistant coating). Pair of 2 (Left and right). 12 slit type option available (Please contact us for further details). | $ 150.29 |
 | DIXCEL HD Disc Rotor (Brake Rotors) -HD 311 2730 S | ITEM DETAILS |
| Heated Disc Rotor. Pair of 2 (Left and right). | DISCONTINUED |
 | DIXCEL HS Disc Rotor (Brake Rotors) -HS 311 2730 S | ITEM DETAILS |
| Heated Slit Disc Rotor. Pair of 2 (Left and right). | DISCONTINUED |
 | DIXCEL PD Disc Rotor (Brake Rotors) -PD 311 2730 S | ITEM DETAILS |
| Standard type, plain disc rotor with enhanced corrosion resistance (rust prevention). High quality but reasonably priced, ideal for those who want a little more performance than standard disc rotors. Pair of 2 (Left and right). | $ 83.97 |
 | DIXCEL SD Disc Rotor More Info (Brake Rotors) -SD 311 2730 S | ITEM DETAILS |
| Slit type disc rotor. 20% improved braking performance for greater stability. Pair of 2 (Left and right). | $ 112.50 |
 | ENDLESS BASIC Brake Rotor More Info (Brake Rotors) -ER212B x 2 | ITEM DETAILS |
| FC Forged. Pair of 2. 1 piece brake rotors. Ideal for users who wish to use a higher quality brake rotors when replacing standard units. | $ 224.87 |
 | ENDLESS CURVING SLIT Brake Rotor More Info (Brake Rotors) -ER212CS x 2 | ITEM DETAILS |
| FC Forged (Heat treated). 1 piece curving slit (Slotted) brake rotors. Ideal for users maximise the potential of the brake pads. Pair of 2 (Left and right). | $ 278.42 |
 | ENDLESS E-SLIT Brake Rotor More Info (Brake Rotors) -ER212ES x 2 | ITEM DETAILS |
| FC Forged. Pair of 2. 1 piece E-SLIT type (Slotted) brake rotors. Ideal for users who wish to improve lap times at the circuit and for better compatibility with higher performance brake pads. | $ 353.37 |
 | Project μ (Mu) SCR Pure Plus 6 (Brake Rotors) -SPPT103-S6 | ITEM DETAILS |
| 2 piece type. Straight slit (slotted). 8 per side. Discs: High grade alloy FC cast iron (High carbon) and rust plating treated. Bell housings: Super hard aluminium alloy (TUFRAM anodised). Suitable for circuit use. Pair of 2 (Left and right). The two-piece structure reduces weight and improves cooling efficiency, while the floating structure reduces distortion and vibration at high temperatures. The tension spring used at the joint minimizes unpleasant noise on the street, while also supporting heavy use such as circuit driving. In addition, the bell housing and bobbin have been specially treated to suppress wear. | $ 180.53 |
 | Techno PRO Spirit Genuine Type Rotor (Brake Rotors) -(GL)SHBRTSAE8601 x 2 | ITEM DETAILS |
| Pair of 2. | $ 139.84 |
| Techno PRO Spirit Genuine Type Rotor (Slotted) (Brake Rotors) -(GL)SHBRTSAE8603 x 2 | ITEM DETAILS |
| Pair of 2. | DISCONTINUED |
 | ACRE Billet 4 Caliper Kit (Brake Upgrade Kits) -ACK-S660BLACK | ITEM DETAILS |
| Racing 4POT billet brake caliper kit. Includes Light Sports brake pads. | $ 2202.13 |
| ACRE Billet 4 Caliper Kit Brake Lines (Brake Upgrade Kits) -B1002 | ITEM DETAILS |
| Brake lines for use with Caliper Kit. | $ 215.43 |
 | SILK ROAD Big Rotor Kit (Brake Upgrade Kits) -1AB-J02 | ITEM DETAILS |
| $ 165.66 |
 | SILK ROAD Rear Big Rotor Stay Set (Brake Upgrade Kits) -1AB-J02ST | ITEM DETAILS |
| Rear big rotor bracket set. Offsets standard rear calipers (disc brake models) for use with larger brake rotors. | $ 114.64 |
 | CUSCO Hyper Rubber Bushes (Bushes and Collars) -116 913 A | ITEM DETAILS |
| 50~100% stiffer than factory rubber bushes. Pressed in the metal shell cases (where applicable). | $ 21.10 |
 | CUSCO Pillow Ball Bushes (Bushes and Collars) -116 464 A | ITEM DETAILS |
| Change to the rigid metal ball joint pivots, for precise control and stability! Race proven high quality spherical joint bearings result in no compression, no squeeze bushings, making the suspension work. Bearings are assembled in high quality shells with the rubber dust boots (on the majority of models). | $ 111.18 |
 | CUSCO Urethane Bushes (Bushes and Collars) -116 C918 A | ITEM DETAILS |
| More durable, heat-proven, smoother and stiffer than standard rubber or CUSCO Hyper Rubber Bushes. | $ 33.51 |
 | TRD Suspension Bush (Bushes and Collars) -40818-AE851 x 2 | ITEM DETAILS |
| DISCONTINUED |
| TRD Suspension Bush Set (Bushes and Collars) -40862-AE852 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Upper Support (Bushes and Collars) -48603-AE851 + 48609-AE851 | ITEM DETAILS |
| DISCONTINUED |
 | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | ITEM DETAILS |
| Performance damper unit only. | DISCONTINUED |
 | CUSCO Tension Rod Bar (Chassis Bars) -116 485 A | ITEM DETAILS |
| Made from 22mm steel pipe that enhances chassis stiffness, rigidity and stabilizes alignment. More effective when used with the Cusco Pillowball Tension Rod kit (Sold separately), where further stability can be achieved when the vehicle is under extreme drag/dive (acceleration/braking). | $ 46.11 |
 | NAGISA Auto UEO Style Front Bomber (Chassis Bars) -XUB0044 | ITEM DETAILS |
| Front chassis frame reinforcement. | DISCONTINUED |
 | NAGISA Auto Gachiri Support (Chassis Bars) -Gacchiri-T-AE86 | ITEM DETAILS |
| Inner fender braces. Patent approved, 3D CAD designed. Steel. | $ 148.91 |
 | SARD SARD Damper (Chassis Bars) -86715 (Old: 86704) | ITEM DETAILS |
| SARD x AISIN collaboration item. Improved line tracing performance. Reduced body roll during cornering. Improved pitch convergence after passing uneven road surfaces. The SARD Damper is installed in the front and rear parts of the cabin where the body twists greatly, suppressing unpleasant vibrations and roll overshoots. It achieves both improved steering response and high-quality ride comfort. A damper with a damping mechanism is incorporated in the component parts to improve steering operability and suppress minute vibrations that can be felt by humans. AISIN's unique mechanical structure, a friction damper that combines disc springs and friction plates, is effective even at low telescopic stroke speeds. | $ 646.28 |
 | Blitz Damper ZZ-R (Coilover Kits) -92778 | ITEM DETAILS |
| Full length adjustable, single cylinder (monotube) coilover suspension with 32 levels of damper adjustment. | $ 1238.54 |
 | Blitz Damper ZZ-R Spec-C (Coilover Kits) -93121 | ITEM DETAILS |
| Full length adjustable, single cylinder (monotube) coilover suspension with 2 way, 32 levels damper adjustment and separate tank. | $ 1676.24 |
 | DG-5 Suspension Kit (Coilover Kits) -(GL)SHCODG5AE8601 | ITEM DETAILS |
| Coilover kit that adjusts to all driving styles, for street and track conditions. - 30 Step adjustable damper. - Enhanced strength utilising a 50/60mm diameter cylinder. - Superior strength steel brackets. - Adjustable upper mounts (Applicable models). - Additional helper/traction spring for improved tractability (Applicable models). - Highest quality Swift 65mm springs. | $ 1610.04 |
 | NOBY BOOTH AE86 Original Full Type Suspension (Coilover Kits) -(GL)SHCONBAE8601 | ITEM DETAILS |
| DISCONTINUED |
| TODA FIGHTEX Damper Kit Type FS (Coilover Kits) -51500-AE8-000 | ITEM DETAILS |
| Fine Sports. | DISCONTINUED |
 | TRUST GReddy Performance Damper Remote-Control Kit (Coilover Kits) -15500213 | ITEM DETAILS |
| For use with TRUST GReddy Performance Damper. | DISCONTINUED |
| TRUST GReddy Performance Damper Remote-Control Kit Upper Mount Spacers (Coilover Kits) -14411115 | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Performance Damper Remote-Control Set (Coilover Kits) -14012206 | ITEM DETAILS |
| Performance Damper Type-S and Remote-Control Kit. | DISCONTINUED |
 | TRUST GReddy Performance Damper Type-S (Coilover Kits) -14012203 | ITEM DETAILS |
| Sports suspension kit suitable for enjoying the circuit, while maintaining ride quality around town on the streets. Linear damping force, supporting the stable driving. A wide range of damping characteristics makes it possible to achieve both supple ride comfort, and sports performance. | $ 1058.57 |
 | ADVICS Heritage Parts Master Cylinder Assy (Other) -BMT-043 | ITEM DETAILS |
| DISCONTINUED |
 | AISIN Door Stabilizer More Info (Other) -DSL-002 | ITEM DETAILS |
| By using a spacer to close the gap between the door catch and the striker, twisting and distortion of the door opening is suppressed. As a result, vehicle response delay during steering operations is reduced and quick response is achieved . Set of 2 (Left and right). Door Stabilizer is a registered trademark of Aisin Co., Ltd.. | $ 96.69 |
 | AISIN Door Stabilizer Bolt Set (Other) -DSL-SP02 | ITEM DETAILS |
| Bolt set required for installation of CUSCO Door Stabilizer. | $ 12.31 |
 | CUSCO Door Stabilizer (Other) -00B 066 01 | ITEM DETAILS |
| By using a spacer to close the gap between the door catch and the striker, twisting and distortion of the door opening is suppressed. As a result, vehicle response delay during steering operations is reduced and quick response is achieved . Set of 2 (Left and right). Door Stabilizer is a registered trademark of Aisin Co., Ltd.. | $ 112.44 |
| CUSCO Door Stabilizer Bolt Set (Other) -00B 066 SP02 | ITEM DETAILS |
| Bolt set required for installation of CUSCO Door Stabilizer. | $ 5.67 |
 | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | ITEM DETAILS |
| $ 12.60 |
 | PROVA Resevoir Tank Cover (Other) -90000JL0200 | ITEM DETAILS |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
 | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | ITEM DETAILS |
| Mechanical lifter kit. | DISCONTINUED |
 | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | ITEM DETAILS |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
 | CUSCO Adjustable Front Lower Arms (Rods and Control Arms) -116 462 C | ITEM DETAILS |
| $ 418.25 |
 | CUSCO Adjustable Lateral Rod (Rods and Control Arms) -116 466 A | ITEM DETAILS |
| $ 101.10 |
 | CUSCO Formula Link (Rods and Control Arms) -116 470 A | ITEM DETAILS |
| $ 244.40 |
 | CUSCO Formula Link JUNIOR (Rods and Control Arms) -116 471 A | ITEM DETAILS |
| $ 166.29 |
 | CUSCO GT Link (Rods and Control Arms) -116 480 A | ITEM DETAILS |
| $ 125.98 |
 | CUSCO N-1 Link (Rods and Control Arms) -116 472 A | ITEM DETAILS |
| $ 121.26 |
 | CUSCO Pillow Ball Tension Rods (Rods and Control Arms) -116 473 A | ITEM DETAILS |
| Castor rods. | $ 312.43 |
 | CUSCO Roll Center Adjuster (Rods and Control Arms) -116 467 A | ITEM DETAILS |
$ 83.90 |
 | JIC Magic Pillow Tension Rods (Rods and Control Arms) -PTE86TB | ITEM DETAILS |
| Castor rods. | $ 223.17 |
 | Jubiride Traction Brackets (Rods and Control Arms) -FO03-20071228160028 | ITEM DETAILS |
| $ 119.37 |
 | MANATEE Racing Pillowball Pipe Arm Set (Rods and Control Arms) -(GL)SHRCMANAE8601 | ITEM DETAILS |
| $ 793.67 |
| MANATEE Racing Pillowball Tie Rod Ends (Rods and Control Arms) -(GL)SHRCMANAE8602 | ITEM DETAILS |
| $ 193.38 |
 | NAGISA Auto A Arm Kit (Rods and Control Arms) -(GL)SHRCNAAE002 | ITEM DETAILS |
| $ 703.28 |
 | NAGISA Auto Front Pillow Lower Arms (Rods and Control Arms) -(GL)SHRCNAAE003 | ITEM DETAILS |
| $ 356.84 |
 | NAGISA Auto UEO Style Front Pillow Lower Arms (Rods and Control Arms) -(GL)SHRCNAAE004 | ITEM DETAILS |
| DISCONTINUED |
 | NAGISA Auto Pillow Lateral Rod (Rods and Control Arms) -(GL)SHRCNAAE007 | ITEM DETAILS |
| $ 155.90 |
 | NAGISA Auto Pillow Reinforced Lateral Rod (Rods and Control Arms) -(GL)SHRCNAAE008 | ITEM DETAILS |
| $ 109.60 |
 | NAGISA Auto Pillow Tension Rods (Rods and Control Arms) -(GL)SHRCNAAE005 | ITEM DETAILS |
| $ 249.76 |
 | NAGISA Auto UEO Style Pillow Tension Rods (Rods and Control Arms) -(GL)SHRCNAAE006 | ITEM DETAILS |
| DISCONTINUED |
 | NAGISA Auto UEO Style Pillow Tie Rod Ends (Rods and Control Arms) -(GL)SHRCNAAE013 | ITEM DETAILS |
| DISCONTINUED |
 | NAGISA Auto Super Tie Rod Ends (Rods and Control Arms) -(GL)SHRCNAAE001 | ITEM DETAILS |
| $ 218.26 |
 | NAGISA Auto Traction Brackets (Rods and Control Arms) -(GL)SHRCNAAE009 | ITEM DETAILS |
| $ 148.97 |
 | NAGISA Auto Traction Kit Junior (Rods and Control Arms) -(GL)SHRCNAAE010 | ITEM DETAILS |
| Full pillow ball bush control arm set. Quick and accurate alignment achieved with turnbuckle type adjustment. | $ 284.40 |
 | NAGISA Auto Traction Kit Pro (Rods and Control Arms) -(GL)SHRCNAAE011 | ITEM DETAILS |
| Equal length 4 link kit. Full pillow ball bush control arm set. Quick and accurate alignment achieved with turnbuckle type adjustment. | $ 627.70 |
 | NAGISA Auto UEO Style UP Tie Rod (Rods and Control Arms) -(GL)SHRCNAAE014 | ITEM DETAILS |
| DISCONTINUED |
 | NOBY BOOTH Heavy Duty Tie Rod Ends (Rods and Control Arms) -005-A | ITEM DETAILS |
| $ 76.91 |
 | Revolver Negative Camber Spacer (Rods and Control Arms) -(GL)SHRCREVAE9602 | ITEM DETAILS |
| DISCONTINUED |
 | Revolver Rear Roll Centre Adapter (Rods and Control Arms) -(GL)SHRCREVAE9603 | ITEM DETAILS |
| $ 44.72 |
 | Revolver Roll Centre Adapter (Rods and Control Arms) -(GL)SHRCREVAE9601 | ITEM DETAILS |
| $ 85.67 |
| Revolver Traction Brackets (Rods and Control Arms) -(GL)SHRCREVAE9604 | ITEM DETAILS |
| DISCONTINUED |
 | SILK ROAD Front Lower Arms (Rods and Control Arms) -1AB-H05 | ITEM DETAILS |
| DISCONTINUED |
 | SILK ROAD Front Tension Rods (Rods and Control Arms) -1AB-G08 | ITEM DETAILS |
| $ 275.01 |
 | SILK ROAD Lower Arm Ball Joints (Rods and Control Arms) -BJ-KE30 | ITEM DETAILS |
| $ 40.94 |
 | SILK ROAD Rear Control Arms (Rods and Control Arms) -1AB-H08R | ITEM DETAILS |
| $ 205.35 |
 | SILK ROAD Tie Rod Ends (Rods and Control Arms) -1AB-G09 | ITEM DETAILS |
| Turnbuckle type adjustable tie rod ends for precise toe setup. | $ 69.29 |
 | SUPER NOW Tie Rod Ends (Rods and Control Arms) -(GL)SHRC-SNW0-AE86-01 | ITEM DETAILS |
| NMB 3 piece pillow balls (spherical bearings). | $ 337.63 |
 | TEIN Pillowball Tension Rods (Rods and Control Arms) -PTT30-11F00 | ITEM DETAILS |
| Castor rods. | DISCONTINUED |
 | URAS Futokusuru (Rods and Control Arms) -0105002-Toyota | ITEM DETAILS |
| Heavy duty tie rod adapter. Prevents pending of tie rods (even heavy duty types). Strengthens the screw part of tie rods, often the wek point of even aftermarket heavy duty tie rods. Length: 100mm, thickness: 25mm, thread pitch: M14 x 1.5. | $ 53.60 |
 | URAS Happy End (Rods and Control Arms) -0105002 | ITEM DETAILS |
| Inverse joint type heavy duty tie rod ends. For use with M14 x 1.5 tie rods or M12 x 1.25 Taper Knuckle. | $ 78.74 |
 | URAS Super Strengthened Tie Rods (Rods and Control Arms) -(GL)SHRAURAE8601 | ITEM DETAILS |
| Strengthened and increased steering angle. | $ 87.56 |
 | URAS Tie Rod Extension (Rods and Control Arms) -01060 | ITEM DETAILS |
| "Tsukitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | $ 53.98 |
 | URAS Tie Rod Extension (Short) (Rods and Control Arms) -0105001 | ITEM DETAILS |
| "Cyoitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | DISCONTINUED |
 | KYB CLIMB Gear (Shock Absorbers) -CGC4030 x 2 | ITEM DETAILS |
| High speed tarmac. | DISCONTINUED |
 | KYB Real Sports Damper GRAVEL (Shock Absorbers) -SDC0020Z x 2 | ITEM DETAILS |
| DISCONTINUED |
 | KYB New SR Special (Shock Absorbers) -NSC4030 x 2 | ITEM DETAILS |
| Sports shock absorber making everyday driving more comfortable. The NEW SR SPECIAL adopts the same shape as a genuine shock absorber, and optimizes the damping force characteristics without changing durability and other qualities, while firmly upgrading the basic performances such as cruising, turning and stopping of the car. Developed with the concept of a balance with the comfort, the ride is "Not hard, but hard!" - with the sense of wearing casual shoes for everyday use. | $ 192.07 |
 | KYB Super Special for Street (Shock Absorbers) -SSC4030 x 2 | ITEM DETAILS |
| For drivers who want ride that is close to standard, but I also want to enjoy stable high-speed cruising. Damper adjustable (4 level). | $ 216.46 |
 | TOKICO HTS Damper (Shock Absorbers) -HTS102 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Race Shock Absorber (Shock Absorbers) -48511-AE941 x 2 | ITEM DETAILS |
| $ 200.59 |
 | TRD Rally/Dirt Trial Shock Absorber (Shock Absorbers) -48511-TE061 x 2 | ITEM DETAILS |
| DISCONTINUED |
| TRD Shock Absorber (Shock Absorbers) -48511-AE851 x 2 | ITEM DETAILS |
| Street use. | DISCONTINUED |
| TRD Shock Absorber Spacer (Shock Absorbers) -48525-AE800 x 2 | ITEM DETAILS |
| DISCONTINUED |
 | TRD Springs (Competition Use) (Springs) -48131-AE801 x 2 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Strut Tower Bar (Strut Tower Bars) -96127 | ITEM DETAILS |
| $ 100.63 |
 | CUSCO Strut Tower Bar Type 40 (Strut Tower Bars) -116 526 A | ITEM DETAILS |
| 40mm Aluminium shaft. Center Bar: Engineered inside and out, the stylish 40mm cross section made of lightweight aluminum. The piping diameter provides great rigidity, able to withstand the harshest of chassis flex. Brackets: The aluminum end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | $ 93.35 |
 | CUSCO Strut Tower Bar Type ALC OS (Strut Tower Bars) -116 535 A | ITEM DETAILS |
| Oval Aluminium-Carbon shaft. Center Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring. Plates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk. Types: Two center bar types are available, specifically set per application. | $ 102.80 |
 | CUSCO Strut Tower Bar Type AS (Strut Tower Bars) -116 510 A | ITEM DETAILS |
| Aluminum Circular Shaft. Center Bar: The most simple and lightweight aluminum shaft bar made hollow for lightweight and rigid characteristics. Brackets: The steel end plate brakets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. | $ 65.01 |
 | CUSCO Strut Tower Bar Type CB (Strut Tower Bars) -116 551 A | ITEM DETAILS |
| 40mm Carbon Fiber. Center Bar: The most lightweight and rigid strut bar available, made from 100% layered carbon fiber for extreme lightness and unmatched strength. Brackets: The steel end plate brakets painted in titanium gray color provide flawless fitment per vehicle application. | $ 112.25 |
 | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -116 540 A | ITEM DETAILS |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 79.18 |
 | CUSCO Strut Tower Bar Type OS-T (Strut Tower Bars) -116 544 A | ITEM DETAILS |
| V style 3 point brace. Third Point Add-On Bar. Bolt-on a third point to pre-existing Cusco strut tower bars (sold separately) for added rigidity, direct contact with the chassis. Bars: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Fitment: Applies to Type 40, Type CB, Type OS, and Type AS Cusco rear strut tower bars. | $ 65.01 |
 | CUSCO Strut Tower Bar Type ST (Strut Tower Bars) -116 511 A | ITEM DETAILS |
| Steel shaft. | $ 74.17 |
 | LAILE Beatrush Strut Tower Brace (Strut Tower Bars) -S8116-FTA | ITEM DETAILS |
| Strut tower bar. | $ 87.24 |
 | NAGISA Auto UEO Style Rear 4P Tower Bar (Strut Tower Bars) -XUT044R | ITEM DETAILS |
| DISCONTINUED |
 | OKUYAMA CARBING Strut Tower Bar More Info (Strut Tower Bars) -611 004 0 | ITEM DETAILS |
| $ 155.71 |
 | CUSCO Pillow Ball Upper Mounts (Upper Mounts) -116 410 A | ITEM DETAILS |
| These upper mounts replace the flimsy factory rubber for a more solid and direct road surface input to the driver as well as keeping alignment specs to the static position during hard cornering. The solid state of the mounts translates the road irregularities to be fully absorbed by the suspension rather than rubber components. This enables improved steering control of the vehicle. CUSCO offers several types of mounts, (camber adjust, fixed, center lock, gravel spec) depending on your vehicle application. All mounts use 6mm thick 2017S duralumin plates. Made to cater to many different types of shock absorbers with a full line of custom pillow nuts and collars. Sold in pairs (Left and right). | $ 169.57 |
 | HKS Pillow Ball Upper Mounts (Upper Mounts) -1712-RT001 | ITEM DETAILS |
| DISCONTINUED |
 | TEIN Pillow Ball Upper Mounts More Info (Upper Mounts) -PAT30-31PFR | ITEM DETAILS |
| Eliminates compliance, for sharper and more direct steering feel. TEIN's pillow ball (spherical bearing) upper mounts are designed specifically for each individual vehicle model. By retaining upper spring and shock absorber position close to standard, TEIN's pillow ball upper mounts keep height change to the minimum and stroke center is maintained. Rubber bushes are replaced with a pillow ball bearings which eliminates the load input compliance, reduces the change of alignment to improve the grip of the tire. *NMB pillow ball bearings are used. Ultra duralumin A2017S-T4 (aircraft grade) is used for upper seats and adjusting plates with anodized aluminum to have maximum strength and durability. High tension material S45C is used for serration bolts. Long bolt design, allows easy mounting and gives enough thread for strut tower bars to be fitted. Sold in pairs (Left and right). | $ 244.09 |
 | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | ITEM DETAILS |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
 | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | ITEM DETAILS |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
 | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | ITEM DETAILS |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
 | Project μ (Mu) Hyper Nut (Wheel Nuts) -HPN-P150B | ITEM DETAILS |
| Heavy duty chromium-molybdenium wheel nuts. 20 nuts (Project Mu Logo) and socket. | $ 75.97 |
 | Project μ (Mu) Racing Floating Nut (Wheel Nuts) -FN-P150M | ITEM DETAILS |
| Floating aluminum collar deployed on nut taper, these super-light and hard nuts work to improve contact with the wheel and prevent loose screws. SCM435 Chromium-molybdenium gun metalllic nuts, with aluminium floating collars. 20 nuts and socket. | DISCONTINUED |
 | Project μ (Mu) Racing Floating Nut II (Wheel Nuts) -FN2P150B | ITEM DETAILS |
| Super-lightweight, high-hardness nuts with floating aluminum collars improves adhesion with the wheel and prevents loosening of the screw. Features green alumite coloured end caps (detachable), and floating collars. Includes: 20 x SCM35 Chrome molybdenum steel nuts with aluminium caps, key adapter socket, and aluminium cap adapter. Optional lock nuts sold separately. | $ 129.82 |
 | Project μ (Mu) Racing Floating Nut II Lock Set (Wheel Nuts) -FN2P150BLN | ITEM DETAILS |
| Super-lightweight, high-hardness lock nuts with floating aluminum collars improves adhesion with the wheel and prevents loosening of the screw. Features green alumite coloured end caps (detachable), and floating collars. Includes: 4 x SCM35 Chrome molybdenum steel lock nuts with aluminium caps, key adapter socket, and aluminium cap adapter. | $ 32.50 |
 | Project μ (Mu) Super Lock Nut 7 (Wheel Nuts) -LN-P150M | ITEM DETAILS |
| High-strength nuts that have a heptagonal (7 sided) shape that prevents removal with ordinary tools, protecting your wheels from theft. 20 (7 sided) nuts and adapter socket. Chromium-molybdenium steel (SCM435) nuts, with aluminium caps. | DISCONTINUED |
 | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | ITEM DETAILS |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | ITEM DETAILS |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | ITEM DETAILS |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | ITEM DETAILS |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
 | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | ITEM DETAILS |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
 | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | ITEM DETAILS |
| $ 218.89 |
 | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | ITEM DETAILS |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
 | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
 | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
 | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
 | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | ITEM DETAILS |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
 | TRD Lug Nut Set (Wheel Nuts) -42607-SP020 | ITEM DETAILS |
| 20 nuts and socket. M12 x 1.5. For use with wheels with nut hole diameter greater than 21mm. Not suitable for use with Toyota OEM wheels. | DISCONTINUED |
| WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | ITEM DETAILS |
| DISCONTINUED |
 | WORK Lock Nut Set (Wheel Nuts) -240254 | ITEM DETAILS |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
 | WORK RS Nut (Wheel Nuts) -240007 | ITEM DETAILS |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
 | SUPER NOW 4 to 5 Hole Conversion Spacer (Wheel Spacers) -(GL)SHWSSNWGEN01 | ITEM DETAILS |
| For 4H/PCD114.3 vehicles only. 27mm thick. Set of 2. | $ 106.14 |
Suspension Parts
 | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | ITEM DETAILS |
| $ 28.47 |
 | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | ITEM DETAILS |
| $ 27.46 |
 | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | ITEM DETAILS |
| $ 38.55 |
 | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | ITEM DETAILS |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
 | J-Blood Front Bumper Spoiler (Front Bumpers) -T-07 | ITEM DETAILS |
| $ 472.55 |
 | Garage Vary Universal Turbulator (Other) -30-4001 | ITEM DETAILS |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
 | KENSTYLE Accent Screws (Other) -(GL)AS01 | ITEM DETAILS |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
 | J-Blood Rear Spoiler Type 2 (Spoilers/Wings) -T-06 | ITEM DETAILS |
| $ 329.12 |
 | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | ITEM DETAILS |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
 | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | ITEM DETAILS |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
 | J-Blood Rear Hatch (Race) (Trunk/Boot Lid/Rear Hatches) -T-12 | ITEM DETAILS |
| $ 388.02 |
 | J-Blood Rear Hatch (Street) (Trunk/Boot Lid/Rear Hatches) -T-11 | ITEM DETAILS |
| $ 495.73 |
 | Run Free 3 Door Rear Gate (Trunk/Boot Lid/Rear Hatches) -(GL)ETBL-RUN-AE86-01 | ITEM DETAILS |
| FRP rear gate with integrated rear spoiler. 3 door hatch models only. | $ 460.77 |
Other Parts
 | FUJITSUBO EXH+ Hood Support (Bonnet Dampers) -070-22451 | ITEM DETAILS |
| Titanium bonnet support/bonnet stay. | $ 115.90 |
 | East Bear Clear Winker Lenses (Exterior Parts) -(GL)OTEPEBAE8601 | ITEM DETAILS |
| Indicator lenses. | DISCONTINUED |
 | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | ITEM DETAILS |
| Universal. Pair (Left and right). | $ 95.05 |
 | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | ITEM DETAILS |
| Universal. Pair (Left and right). | $ 149.29 |
 | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | ITEM DETAILS |
| Universal. Pair (Left and right). | DISCONTINUED |
 | SARD Aero Blade (Exterior Parts) -61967 | ITEM DETAILS |
| Sold individually (1 piece). | $ 20.31 |
 | SARD Front Bumper Canard (Exterior Parts) -61965 | ITEM DETAILS |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
 | SARD Front Under Flap (Exterior Parts) -61966 | ITEM DETAILS |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
 | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | ITEM DETAILS |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
 | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | ITEM DETAILS |
| $ 217.69 |
 | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | ITEM DETAILS |
| Gas/Petrol cap cover. | DISCONTINUED |
 | Blitz i-Burner Expansion Kit (Globes) -14566 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz i-Burner Spark Lights (Globes) -14565 | ITEM DETAILS |
| DISCONTINUED |
 | East Bear Aero Mirror (Mirrors) -(GL)OTMREBAE8601 | ITEM DETAILS |
| DISCONTINUED |
 | HKS Billet Oil Filler Cap (Oil Filler Caps) -24003-AT002 | ITEM DETAILS |
| Duralumin. | $ 51.15 |
 | TRD Aluminium Oil Filler Cap (Oil Filler Caps) -12180-SP002 (Old: 12180-SP000) | ITEM DETAILS |
| DISCONTINUED |
 | TRD Duracon Oil Filler Cap (Oil Filler Caps) -MS112-00001 (Old: 12180-SP030 12180-SP031) | ITEM DETAILS |
| DISCONTINUED |
 | TRUST GReddy Oil Filler Cap (Oil Filler Caps) -13911023 / 13911013 | ITEM DETAILS |
| Chrome or chrome blue. | DISCONTINUED |
 | TRUST GReddy Oil Filler Cap B-Type More Info (Oil Filler Caps) -13901501 GOC-B01 | ITEM DETAILS |
| Machined from aluminum. Comes with a special tool that is convenient when the cap is hot or when the cap is difficult to remove. Includes O ring/seal. | $ 45.73 |
 | TRUST GReddy Cable Ties (Other) -18001742 | ITEM DETAILS |
| GReddy logo cable ties. | $ 14.19 |
 | CUSCO D1 Roll Cage More Info (Roll Cages) -116 261 C | ITEM DETAILS |
| The D1 chromoly roll cages are recommended for street use appliactions as they are 33% lighter than conventional steel cages. Available in many configurations CUSCO D1 Roll Cages strengthen individual areas of the chassis to keep the cabin intact during a roll over. Mounting points, bar joints and other details were thoroughly examined, researched and tested during the design phase to enable a light but strong roll bar/cage. D1 Roll Cage bars are made from chromoly steel pipe. 40mm pipe diameter. Pipe thickness: 1.6mm. CUSCO blue painted. | $ 349.15 |
 | CUSCO SAFETY 21 Roll Cage More Info (Roll Cages) -116 270 C20 | ITEM DETAILS |
| Steel Safety 21 rollcages are made for those who regularly track their cars. These steel rollcages comply with sanctioning race bodies that abide by FIA regulations (depending on santioning body). Available in many configurations CUSCO SAFETY 21 Roll Cages strengthen individual areas of the chassis to keep the cabin intact during a roll over. Mounting points, bar joints and other details were thoroughly examined, researched and testedduring the design phase to enable a light but strong roll bar/cage. Safety 21 bars are made from cold drawn seamless carbon steel (Black). 40mm pipe diameter. Pipe thickness: 2.0mm. Some Safety 21 cages comply to FIA regulations (depending on sanctioning body). Mounting plate size/thickness: >60cm2 / 2.6mm. Reinforcement plate size/thickness: >120cm2 / 3.2mm. | $ 288.68 |
 | CUSCO SAFETY 21 Roll Cage - Race More Info (Roll Cages) -116 280 C20 | ITEM DETAILS |
| Specially designed cages for race use applications. Designed to "just fit" vehicles with fully stripped out interiors (No roof trim). Steel Safety 21 rollcages are made for those who regularly track their cars. These steel rollcages comply with sanctioning race bodies that abide by FIA regulations (depending on santioning body). Available in many configurations CUSCO SAFETY 21 Roll Cages strengthen individual areas of the chassis to keep the cabin intact during a roll over. Mounting points, bar joints and other details were thoroughly examined, researched and testedduring the design phase to enable a light but strong roll bar/cage. Safety 21 bars are made from cold drawn seamless carbon steel (Black). 40mm pipe diameter. Pipe thickness: 2.0mm. Some Safety 21cages comply to FIA regulations (depending on sanctioning body). Mounting plate size/thickness: >60cm2 / 2.6mm. Reinforcement plate size/thickness: >120cm2 / 3.2mm. | $ 288.68 |
 | CUSCO SAFETY 21 Roll Cage - Works Type More Info (Roll Cages) -116 270 W9 | ITEM DETAILS |
| 9 to 15 point roll cages provide further strength and safety . Includes removable side bars and center/A pillar brackets (where possible - depending on vehicle type). Steel Safety 21 rollcages are made for those who regularly track their cars. These steel rollcages comply with sanctioning race bodies that abide by FIA regulations (depending on santioning body). Available in many configurations CUSCO SAFETY 21 Roll Cages strengthen individual areas of the chassis to keep the cabin intact during a roll over. Mounting points, bar joints and other details were thoroughly examined, researched and testedduring the design phase to enable a light but strong roll bar/cage. Safety 21 bars are made from cold drawn seamless carbon steel (Black). 40mm pipe diameter. Pipe thickness: 2.0mm. Some Safety 21cages comply to FIA regulations (depending on sanctioning body). Mounting plate size/thickness: >60cm2 / 2.6mm. Reinforcement plate size/thickness: >120cm2 / 3.2mm. | $ 621.27 |
 | HKS Emblem (Stickers and Emblems) -51003-AK027 | ITEM DETAILS |
| Silver. 87 x 35mm. | DISCONTINUED |
 | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | ITEM DETAILS |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
 | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | ITEM DETAILS |
| ABS resin emblem of Tuned by HKS. Size：115mm x 19mm. | $ 28.22 |
 | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | ITEM DETAILS |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
 | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | ITEM DETAILS |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
 | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | ITEM DETAILS |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
 | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | ITEM DETAILS |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
 | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | ITEM DETAILS |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
 | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | ITEM DETAILS |
| HKS logo on oil color. | $ 12.35 |
 | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | ITEM DETAILS |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
 | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | ITEM DETAILS |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
 | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | ITEM DETAILS |
| Small-sized transcription sticker. | $ 12.35 |
 | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | ITEM DETAILS |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
 | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | ITEM DETAILS |
| High brightness reflective sheet. | $ 24.76 |
 | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | ITEM DETAILS |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
 | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | ITEM DETAILS |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
 | TOMEI 70 Sticker (Stickers and Emblems) -761031 | ITEM DETAILS |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
 | TOMEI Emblem (Stickers and Emblems) -763000 | ITEM DETAILS |
| 120 x 22mm. | $ 19.65 |
 | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | ITEM DETAILS |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
 | Top Fuel Emblem (Stickers and Emblems) -26735831 | ITEM DETAILS |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
 | TRD Carbon Emblem E Type (Stickers and Emblems) -08231-SP074 | ITEM DETAILS |
| 27 x 150mm. Discontinued. | DISCONTINUED |
 | TRD Emblem (B Type) (Stickers and Emblems) -08231-SP090 | ITEM DETAILS |
| 26 x 70mm. Discontinued. | DISCONTINUED |
 | TRD Emblem (Logo Type) (Stickers and Emblems) -08231-SP088 | ITEM DETAILS |
| 24 x 171mm. Discontinued. | DISCONTINUED |
 | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | ITEM DETAILS |
| DISCONTINUED |
 | Blitz Towing Strap (Tow Hooks/Straps) -13890 | ITEM DETAILS |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
 | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | ITEM DETAILS |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
 | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | ITEM DETAILS |
| $ 41.04 |
 | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | ITEM DETAILS |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
 | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | ITEM DETAILS |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
 | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | ITEM DETAILS |
| Set of 4. | $ 19.84 |
 | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | ITEM DETAILS |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
 | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | ITEM DETAILS |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
 | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | ITEM DETAILS |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
 | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | ITEM DETAILS |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
 | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | ITEM DETAILS |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
| CUSCO Acrylic Windows (Windows) -116 800 A | ITEM DETAILS |
| Designed to shed weight off of race machines. These acrylic windows are direct factory replacement, and weigh a fraction of the standard factory glass. Designed for competition use. | $ 642.50 |
| STOUT Acrylic Window (Windows) -(GL)OTWNSTOAE8601 | ITEM DETAILS |
| $ 404.40 |
Back | Back to TOPCan't find a part or not listed for your model?
Email: [email protected]
Images are for illustration purposes only, and may not be of exact product.
Pricing in currencies other than JPY Japanese Yen are for reference purposes only.
All prices are subject to change, and are not inclusive of shipping.
|
Customer Services Contact Us Purchasing Information International Shipping Payment Methods Currency Conversion |
Don't Miss Out Mailing List Specials Product Catalogue |
About Greenline About Greenline |
We specialise in shipping internationally!
And offer local delivery by special arrangement.
© Greenline Motorsports, 2002-2026 Terms and Conditions, Privacy Policy
A Gosaru Solution
