| Categories: | |
![]() | Apex APEXi AVC-R (Boost Controllers) -420-A004 | |
| Acutator Valve Controller Type-R. | DISCONTINUED |
![]() | Blitz A/F Box (Boost Controllers) -15063 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional Press Sensor Set. | DISCONTINUED |
![]() | Blitz Dual-SBC Spec R (Boost Controllers) -15059 | |
| High performance Digital boost controller. Twin solenoid (~2.5kg/cm3). | DISCONTINUED |
![]() | Blitz Dual-SBC Spec S (Boost Controllers) -15058 | |
| High performance Digital boost controller. Single solenoid (~1.2kg/cm3). | DISCONTINUED |
![]() | Blitz External Voltage Input Harness (Boost Controllers) -15053 | |
| Optional part for use with SBC-iD/SBC i-Color to display one additional ECU signal (0~16V). | DISCONTINUED |
![]() | Blitz Press Sensor Set (Boost Controllers) -19211 | |
| Optional part for use with SBC i-Color. Cannot be used in conjuntion with optional A/F Box. | $ 69.29 |
![]() | Blitz Remote Switch (Boost Controllers) -15045 | |
| DISCONTINUED |
![]() | Blitz SBC i-Color Spec R (Boost Controllers) -15082 | |
| Multi Function & Full Colour Display. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-Color Spec S (Boost Controllers) -15080 | |
| Multi Function & Full Colour Display. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec R (Boost Controllers) -15078 | |
| Hi-DEF Boost Controller. Twin solenoid valve. | DISCONTINUED |
![]() | Blitz SBC i-D Spec S (Boost Controllers) -15073 | |
| Hi-DEF Boost Controller. Single solenoid valve. | DISCONTINUED |
![]() | Blitz SBC Type R (Boost Controllers) -15039 | |
| High performance Digital boost controller. Twin solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S (Boost Controllers) -15040 | |
| High performance Digital boost controller. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. | DISCONTINUED |
![]() | Blitz SBC Type S PLUS (Boost Controllers) -15044 | |
| High performance boost controller with improved visibility using a new VA liquid crystal display. Maximum 4 boost setting (modes) channels (Low, High, M-1 and M-2), while maintaining the performance of the previous model. Single solenoid (~3.00hkPa, 43.5PSI). All new solenoid and algorithms. Real-time boost display, after peak, peak hold, warning, limiter, scramble boost. By connecting the optional Blitz Remote Switch (Sold separately), scramble boost function can be engaged with the hand switch. The Blitz Remote Switch can also be setup to switch boost channels (modes) easily. | DISCONTINUED |
![]() | Blitz SBC-DC (Boost Controllers) -15060 | |
| DISCONTINUED |
![]() | Blitz SBC-iD III (Boost Controllers) -15085 | |
| Twin sequential solenoid. | DISCONTINUED |
![]() | Blitz Temp Sensor Set (Boost Controllers) -19210 | |
| Optional part for use with SBC i-Color. One set per SBC i-Color. | $ 69.29 |
![]() | Blitz Wireless Remote Switch (Boost Controllers) -15042 | |
| Option Part for Blitz SBC Type S/Type R. For scramble or HI/LOW boost channel switching. | DISCONTINUED |
![]() | HKS EVC (Old) (Boost Controllers) -45003-AK001 | |
| 4th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC Black Limited (Boost Controllers) -45003-AK004 | |
| 4th Generation Electronic Valve Controller. Limited Edition. Discontinued. | DISCONTINUED |
![]() | HKS EVC Display Stand (Boost Controllers) -53002-AK001 | |
| For use with display of HKS EVC. | $ 7.56 |
![]() | HKS EVC Easy Writer (Boost Controllers) -45999-AK026 | |
| Computer connection kit for use with HKS EVC VI/EVC VI IR. Conveniently view and edit maps and settings. Not required for HKS EVC IR 2.4. Software available for download from HKS website. | $ 75.59 |
![]() | HKS EVC EZ II (Boost Controllers) -45003-AK002 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC V (Boost Controllers) -45003-AK005 | |
| 5th Generation Electronic Valve Controller. Discontinued. | DISCONTINUED |
![]() | HKS EVC V and Easy Writer Set (Boost Controllers) -45003-AK006 | |
| Discontinued. | DISCONTINUED |
![]() | HKS EVC VI (Boost Controllers) -45003-AK010 | |
| 6th Generation Electronic Valve Controller. Featuring all new display and valve units for new functions. | DISCONTINUED |
![]() | HKS EVC VI and Easy Writer Set (Boost Controllers) -45003-AK010 + 45999-AK026 | |
| DISCONTINUED |
![]() | HKS EVC VI-IR (Boost Controllers) -45003-AK011 | |
| 2.2 inch full colour TFT screen. | DISCONTINUED |
![]() | HKS EVC VI-IR 2.4 (Boost Controllers) -45003-AK012 | |
| 2.4 inch full colour TFT screen for better visibility. Directly pushing 4 buttons on the unit enables simple settings. Correction map function is added for more precise boost setting. HKS boost setting tool EasyWriter can be easily connected. Basic performance as a boost controller is the same as EVC6-IR. - Correction map grid point : 10 x 10. - Pressure correction range : -180 - 180. - More precise correction is possible for modern smaller sized turbo. Monitor Navigation System easily leads the user to the correct setting and logging screens. The proven Stepping Motor is utilized as a valve unit. | DISCONTINUED |
![]() | HKS EVC VII (Boost Controllers) -45003-AK013 | |
| 7th Generation Electronic Valve Controller. Featuring all new "HIPER ENGINE" CPU for even better boost control than previous models. | DISCONTINUED |
![]() | HKS EVC VII Option Parts (Boost Controllers) -45999-AK029 | |
| Option/Repair parts for use with HKS EVC VII. | $ 22.55 |
![]() | HKS EVC VII-MR (Boost Controllers) -45003-AK016 | |
| Revamped model of the high-end boost controller EVC VII. While retaining its wide range of functions, it now offers more precise control and improved response at high boost levels. | $ 408.18 |
![]() | HKS EVC-S (Boost Controllers) -45003-AK009 | |
| DISCONTINUED |
![]() | HKS EVC-S2 (Boost Controllers) -45003-AK015 | |
| The simple-to-operate boost controller EVC-S has evolved with a color LCD for excellent visibility. The display area is doubled compared to the previous EVC-S. A variety of displays that utilize dot displays enable intuitive operation and improve operability. Displays the function of each button during setup (button information display) and supports modification operations. Boost settings have been expanded from the previous 2 modes to 4 modes (Modes A to D) making it easy to select boost according to the conditions. New features include circuit mode and scramble mode (Controlled by switching between two of the four boost settings) (Scramble mode is switched according to the set time). Added overtime setting to warning function - Warning control will not start unless the warning value has exceeded a set time, so the range of adjustment for warning control has been expanded. The maximum control boost is 250kPa and supports a wide range of boost control. Inheriting the control logic of the EVC-S, which has excellent boost control, and expanding the range of settings by adding a sampling time setting. | $ 250.95 |
![]() | Power Enterprise Power Boost Controller (PBC) (Boost Controllers) -(GL)ELBCPREPBC-Black | |
| DISCONTINUED |
![]() | TRUST GReddy External Signal Harness (Boost Controllers) -15900544 | |
| For use of Profec E-01. 2 pulse inputs, 2 linear inputs and 1 linear output. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy Pressure Sensor Share Harness (Boost Controllers) -15900543 | |
| For use of Profec E-01 pressure sensor with e-Manage. | $ 10.23 |
![]() | TRUST GReddy Profec (Boost Controllers) -15500214 | |
| OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | $ 264.96 |
![]() | TRUST GReddy PRofec B Spec. II (Boost Controllers) -15500209 | |
| DISCONTINUED |
![]() | TRUST GReddy PRofec E-01 (Boost Controllers) -15500207 | |
| Can be used in conjunction with Trust e-Manage. | DISCONTINUED |
![]() | TRUST GReddy Profec Repair Parts (Boost Controllers) -15900011 | |
| Repair /service part for Profec (OLED screen). | $ 10.25 |
![]() | TRUST GReddy PRofec TYPE-S (Boost Controllers) -15500211 | |
| DISCONTINUED |
![]() | TRUST GReddy Profec White (Boost Controllers) -15500219 | |
| Limited edition model with white display, buttons and dial. OLED screen. Controller dimensions: 89 x 36.5mm, 11mm thick (not including switch portion). Includes bracket (stay). | DISCONTINUED |
![]() | TRUST GReddy Remote Switching System (Boost Controllers) -15500351 | |
| For use with Gradis-9000, PRofec boost controllers. | DISCONTINUED |
![]() | Apex APEXi AFC Neo (Engine Management) -401-A018 (Old: 401-A017) | |
| Colour Display Airflow Converter. Does not include APEXi General Purpose Stand. | DISCONTINUED |
![]() | Apex APEXi EL FC Commander More Info (Engine Management) -415-A030 | |
| APEXi Power FC (Full Computer) control unit. EL backlit version. For use with APEXi Power FC. If purchasing separately from Power FC, please supply Power FC serial number. | $ 239.74 |
![]() | Apex APEXi FC Commander More Info (Engine Management) -415-T001 | |
| APEXi Power FC (Full Computer) control unit. For use with APEXi Power FC. If purchasing separately from Power FC, please supply Power FC serial number. | DISCONTINUED |
![]() | Apex APEXi Power FC (AP Engineering Special) More Info (Engine Management) -4E14T05Z | |
| DISCONTINUED |
![]() | Apex APEXi Power FC (Special Edition) More Info (Engine Management) -(GL)ELEMAPXPFCSPL13 | |
| Special consignment model. FC Commander not included. | DISCONTINUED |
![]() | Apex APEXi Power FC Boost Controller Kit More Info (Engine Management) -415-A003 | |
| Optional kit designed to control boost through the Power FC. Simple connection to the Power FC allows the user to access a full self-learning boost controller. The Power FC allows up to 4 different boost presets for any stage of driving. The high grade solenoid valve is the same one used in our Super AVC-R boost controller. As with the S-AVCR, the Boost control kit allows increased boost response and boost stability at high RPM. If purchasing separately from Power FC, please supply Power FC serial number. | $ 239.74 |
![]() | Apex APEXi Power FC Idle D-Kit (Engine Management) -499-X001 / 49C-A004 | |
| For Power FC to use mass air pressure sensor reading as opposed to air flow meter at idle. | DISCONTINUED |
![]() | Apex APEXi Power FC Pressure Sensor and Harness kit (Engine Management) -499-X001 / 49C-A003 | |
| DISCONTINUED |
![]() | Apex APEXi Power FC Pro Spec.CPU More Info (Engine Management) -1JGT2PRO | |
| For Drag. | DISCONTINUED |
![]() | Apex APEXi S-AFC II More Info (Engine Management) -401-A011 | |
| Super Air Flow Converter II. | DISCONTINUED |
![]() | Blitz R-FIT (Engine Management) -15120 | |
| Fuel Intensity Tracer. 16 point engine revolution fuel control. | DISCONTINUED |
![]() | HKS F-CON Harness (Engine Management) -4202-RT026 | |
| For use with F-CON SZ, F-CON iS or F-CON V Pro. | $ 164.40 |
![]() | HKS F-CON V Pro Ver.3.4 + Power Writer Set (Engine Management) -42016-AK002 | |
| Full control over fuel and ignition signals. Other optional functions can be used to control solenoid valves, relays, lamps, etc. Various output settings can be made with the power writer. You can also check engine information on the monitor. When performing boost-up or harder tuning, it is possible to rewrite data in real time, which is not possible with other companies' flash rewriting methods, and the setting workability is particularly good. Log function allows the user to keep a history of their driving data. By capturing standard engine sensor signals it is possible to control the engine. In order to use this product, you will need computer operation, knowledge of the vehicle/engine, and technical skills related to control. If the installation and settings are not performed correctly, the engine performance will not be achieved satisfactorily, and may even result in damage. This product is for professional use only, and specifications and settings will vary depending on the vehicle, installed parts, and usage environment. For this reason technical support specific to the application vehicle cannot be offered. For use with vehicles where HKS F-CON Harness (Sold separately) is available. Does not include maps. Requires tuning to suit application vehicle. Startup maps are available for some vehicles. Communications unit is tied to each F-CON V Pro unit (Not suitable for other F-CON V Pro units). Power Writer Software designed for use on computers with Microsoft Windows 7 and later, more than 2GB RAM, More than 1GB of hard disc space, USB port. | $ 1133.82 |
![]() | HKS F-CON V Pro Ver.4 + Power Writer Set (Engine Management) -42016-AK001 | |
| Full control over fuel and ignition signals. Other optional functions can be used to control solenoid valves, relays, lamps, etc. Various output settings can be made with the power writer. You can also check engine information on the monitor. Analog Voltage Input: Throttle opening, water temp., air temp., and etc., 0 to 5V sensor can be input up to 20 channels. A/F Knocking Input: Connecting the A/F sensor (* option parts required) or knock sensor enables to measure the linear A/F or knock level. Built-in Air Pressure Sensor: Air pressure sensor is built-in to provide stable control under various environment conditions. Fuel & Ignition Control: Independent output control up to 8 channels, and sequential control is available up to 8 cylinders. DC Motor Output: Controlling the electronic control throttle of DC motor type, which is widely used for the stock automobiles, is available up to 2 channels. Other Output Control: Controlling the valve timing of HKS V-CAM system or stock system and boost pressure (*Option parts are required.) is available. Also, controlling the output up to 22 channels, relay, and warning notice is possible under an optional condition. Built-in Log Data Memory: 8MB of memory to save the log data is available. When performing boost-up or harder tuning, it is possible to rewrite data in real time, which is not possible with other companies' flash rewriting methods, and the setting workability is particularly good. Log function allows the user to keep a history of their driving data. By capturing standard engine sensor signals it is possible to control the engine. In order to use this product, you will need computer operation, knowledge of the vehicle/engine, and technical skills related to control. If the installation and settings are not performed correctly, the engine performance will not be achieved satisfactorily, and may even result in damage. This product is for professional use only, and specifications and settings will vary depending on the vehicle, installed parts, and usage environment. For this reason technical support specific to the application vehicle cannot be offered. For use with vehicles where HKS F-CON Harness (Sold separately) is available. Does not include maps. Requires tuning to suit application vehicle. Startup maps are available for some vehicles. Communications unit is tied to each F-CON V Pro unit (Not suitable for other F-CON V Pro units). Power Writer Software designed for use on computers with Microsoft Windows 7 and later, more than 2GB RAM, More than 1GB of hard disc space, USB port. | DISCONTINUED |
![]() | Power Enterprise CAMCON Extension Cable (Engine Management) - | |
| For use with Power Enterprise CAMCON. 1.5m | DISCONTINUED |
![]() | Power Enterprise CAMCON Ti (Engine Management) -CC-111 | |
| Cam and Airflow Controller. | DISCONTINUED |
![]() | TRUST GReddy E-01 (Engine Management) -15500208 | |
| For use with Trust GReddy e-Manage - not boost controller. | DISCONTINUED |
![]() | TRUST GReddy e-manage (Engine Management) -15500510 (Old: 15500500) | |
| TRUST Greddy e-manage (Blue). Piggy back engine management system that enables fuel adjustment to effeectively derive power regardless of power, from beginners to high end users. Requires e-manage Harness Kit - Injector and e-manage Harness Kit (Ignition) (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
![]() | TRUST GReddy e-manage Knock Sensor Adapter (Engine Management) -15900903 | |
| Option part for use with Trust GReddy e-Manage. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor (Engine Management) -16401301 | |
| Option part for use with Trust GReddy e-Manage. 3.0kg/cm2. For use with factory or AF or MAP sensor. | DISCONTINUED |
![]() | TRUST GReddy e-manage Pressure Sensor Harness (Engine Management) -16401406 | |
| Option part for use with Trust GReddy e-Manage. For use with e-Manage Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate More Info (Engine Management) -15500501 | |
| Engine Control Unit Manager ULTIMATE. The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of existing sensors, the ability to easily alter factory settings and not having to tune from scratch. Requires harness kit (vehicle specific harness available for some applications) - Sold separately. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor (Engine Management) -16401301 | |
| For use with Trust GReddy e-Manage Ultimate. 3.0kg/cm2. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Harness (Engine Management) -16401406 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Pressure Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Ultimate Pressure Sensor Type II for Turbo (Engine Management) -16401306 | |
| For use with Trust GReddy e-Manage Ultimate. -99~3.0kPa. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit (Engine Management) -15901500 | |
| Universal harness. For applications where no car specific harness is available. 18P, 14P, 12P connectors and wiring set. | DISCONTINUED |
![]() | TRUST GReddy e-manage Ultimate Universal Harness Kit Type 2 (Engine Management) -15901510 | |
| Universal harness. For applications where no car specific harness is available. With current reverse flow diode. 18P, 14P, 12P connectors and wiring set. | $ 106.71 |
![]() | TRUST GReddy e-manage Ultimate Vehicle Specific Harness (Engine Management) -15911503 | |
| Plug and play harness. | $ 156.25 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor (Engine Management) -16401304 | |
| For use with Trust GReddy e-Manage Ultimate. | $ 45.73 |
![]() | TRUST GReddy e-manage Ultimate Water Temp Sensor Harness (Engine Management) -16401408 | |
| For use with Trust GReddy e-Manage Ultimate. For use with e-Manage Ultimate Water Temp Sensor. | $ 26.33 |
![]() | TRUST GReddy e-manage Vehicle Specific Harness (Engine Management) -15910913 | |
| Plug and play harness. Injector and ignition harnesses not required when using this product with TRUST e-manage. | DISCONTINUED |
![]() | TRUST GReddy Extension Harness More Info (Engine Management) -15911101 | |
| ECU wiring harness extension for splicing in electronic parts, preserving your standard harness. Suitable for GReddy e-manage, GReddy e-manage Ultimate, GReddy v-manage, GReddy f-manage. | DISCONTINUED |
![]() | TRUST GReddy v-manage (Engine Management) -15500551 | |
| Variable Valve Timing Manager. | DISCONTINUED |
![]() | TRUST GReddy v-manage Option Part (Engine Management) -15901606 | |
| $ 22.17 |
![]() | TRUST GReddy v-manage Vehicle Specific Harness (Engine Management) -(GL)15932000(?) | |
| Plug and play harness for use with TRUST v-manage. | DISCONTINUED |
![]() | Nagai Denshi ULTRA Shift Indicator (Other) -4500 | |
| Displays selected gear in real time. Shift change indicator function. Reverse gear display function. Lock up gear indicator (compatible automatic transmission models only). Installation using 5 connections: IG power (or ACC power supply), body ground, vehicle speed signal, rpm signal, reverse signal (mainly for MT car only). | DISCONTINUED |
![]() | Apex APEXi ACTIVE ECV (Other Controllers) -157-A001 | |
| Valve unit only. For use with ACTIVE ECV Controller (Sold separately). Valve opening control based on vehicle speed or engine rpm. | $ 350.60 |
![]() | Apex APEXi ACTIVE ECV Controller (Other Controllers) -433-A002 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | $ 166.29 |
![]() | Apex APEXi ACTIVE ECV Controller (Old Version) (Other Controllers) -433-A001 | |
| Control unit only. For use with ACTIVE ECV (Exhaust Control Valve) - Sold separately. | DISCONTINUED |
![]() | Apex APEXi DECS ECV Controller (Other Controllers) -432-A002 | |
| DECS Exhaust Control Valve. Controller, motor unit and wire cable. For use with APEXERA APEXi Exhaust Control Valves (Sold separately). Discontinued. | DISCONTINUED |
![]() | Apex APEXi ECV (For DECS ECV Controller) (Other Controllers) -155-B020 | |
| DISCONTINUED |
![]() | Bee-R Rev Limiter (Other Controllers) -(GL)ELOT-BEE-TOY-01 | |
| $ 170.95 |
![]() | Billion VFC II (Other Controllers) -BVTW-03 | |
| Advanced Variable Fan Controller. 2 adjustable outputs. Control the electric fan in two stages at any water temperature. | $ 124.72 |
![]() | Billion VFC-Pro Dual Digital (Other Controllers) -BVP-PRO2 | |
| Variable Fan Controller PRO DD. | DISCONTINUED |
![]() | Billion VFC-Pro Dual Digital Manual Override Switch (Other Controllers) -BVP-PRO2SW | |
| VFC-Pro Dual Digital option part. For activation of fan manually. Switch illuminates green when activated. Includes: Switch, harness (1.5m) and bracket. | $ 22.87 |
![]() | Blitz E-ESC (Other Controllers) -16087 | |
| Electric Exhaust Sound Controller. Universal item exhaust volume controller. Auto modes and manual mode. | DISCONTINUED |
![]() | HKS AFR (Other Controllers) -4604-RN001 | |
| Air Fuel Ratio Regulator. | $ 68.03 |
![]() | HKS FCD (Other Controllers) -4501-RA002 | |
| Fuel (Boost) Cut Defencer. Removes fuel cut that occurs when increasing boost on turbo charged engines. Although it is relatively easy to increase boost level on turbo cars, the standard computer on some models determines that the higher level of boost as abnormal and controls cuts fuel to preserve the engine. This FCD removes this fuel cut and widens the range of possible boost pressure settings. Please note that the FCD cannot control fuel and engine damage can occur if boost level is excessive. | $ 73.57 |
![]() | HKS SLD (Other Controllers) -4502-RA002 | |
| Speed Limit Defencer. | $ 73.57 |
![]() | HPI Multi Temp Controller (Other Controllers) -HPEE-MTC | |
| Universal controller for switching on/off electric fans, oil/differential cooler pumps at set temperature (between 60-120 degrees Celsius). Includes: Control unit, temperature sensor 1/8PT, temperature sensor harness, zip ties. For 12V vehicles only. | DISCONTINUED |
![]() | Kinokuni Run Max Electric Fan Control Kit (Other Controllers) -1403N | |
| $ 73.45 |
![]() | Kinokuni Run Max Separate Electric Fan Multi Control Kit (Other Controllers) -1405 | |
| $ 115.02 |
![]() | PIVOT Fan Control Gauge (Other Controllers) -FCG | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Super Temp Controller (Other Controllers) -STC | |
| Fan controller with water or oil temperature display. | DISCONTINUED |
![]() | TRUST GReddy Dual Switching Controller (Other Controllers) -15500610 | |
| Control of 2 channels. Separate on and off points. Warning, peak hold functions. Commonly used for control of electric fans, water spray, oil pumps, NOS solenoids etc. | $ 176.27 |
![]() | TRUST GReddy Multi Switching System (Other Controllers) -15500600 | |
| DISCONTINUED |
![]() | TRUST GReddy Relay Kit (Other Controllers) -15901400 | |
| For use with TRUST Multi Switching System. For use with high drawing items (fuel pumps/fans etc). | $ 18.68 |
![]() | Yashio Factory Okachan Water Temp oC (Other Controllers) -(GL)EL-OT-YFT-03 | |
| DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor (Other Controllers) -(GL)EL-OT-YFT-06 | |
| For use with Okachan Water Temp oC. Includes harness. | DISCONTINUED |
![]() | Yashio Factory Okachan Water Temp Sensor Attachment (Other Controllers) -(GL)EL-OT-YFT-07 | |
| For use with Okachan Water Temp oC. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP (Performance Meters) -405-A012 | |
| The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. This new aesthetically pleasing model was crafted to match the likes of other highly popular APEXi electronics such as the VAFC (VTEC Controller) and the AVCR (Boost Controller). The new screen utilizes the easy to read VFD (Vacuum Fluorescent Display) with built in light sensor used in many of APEXi's line up. The new unit also delivers a host of new functions. Standard features include: Engine RPM, Vehicle Speed, Travel Distance, and Battery Voltage (All which can be displayed in real time graph mode, numerical mode, or analogue mode; 1-4 channels at a time.), Peak Hold, Replay (With 60 second playback.), Speed Limiter Cut, 0-100m, 200m, 400m times with trap speed, 0-100km/h, 200km/h, 300km/h times, 100km/h, 200km/h, 300km/h b 0 times, user defined Mid Range Acceleration, Stop Watch functions, Best Time Memory, RPM Warning, Speed Warning, RPM and Speed Outputs (For external devices requiring an RPM or speed signal.), Tire Size Correction (For acceleration and timing accuracy.), and Vehicle weight input. One of the most exiting of the new features is the option to utilize the revolutionary APEXi G-Sensor (Sold separately.). The G Sensor allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G on the race track, or used in an array of new features including: Highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, Horse Power Calculation, and Loss Power Calculation. By taking advantage of the optional G Sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel-spin. Using the G Sensor modifies the speed sensor signal, compensating for wheel-spin and producing impeccably accurate acceleration times. | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP G-Sensor (Performance Meters) -430-A013 | |
| An added feature to the Rev Speed Meter GP, the G-Sensor unit allows the unit to measure G forces in 4-way front/rear/left/right directions. This data can be plotted in a graph display to map acceleration characteristics and lateral G's on the race track, or used in an array of new features including: highly accurate 100m/200m/400m times with trap speed and wheel-spin correction, horse power calculation, and loss power calculation. By taking advantage of the optional G-sensor, the user can produce extremely accurate acceleration measurements. Usually, when measuring acceleration times using the speed sensor signal alone, the meter will end measurement too early (shorter distance) due to wheel spin. The G-sensor modifies the speed sensor signal, compensating for wheel spin and producing impeccably accurate times. For use with APEXi Rev/Speed Meter GP (Sold separately). | DISCONTINUED |
![]() | Apex APEXi Rev/Speed Meter GP Shift Lamp (Performance Meters) -430-A011 | |
| With the optional shift indicator light, you can easily incorporate shift points into an A'PEXi Rev Speed Meter-GP (Sold separately). | DISCONTINUED |
![]() | ARK Design Boost Pressure Sensor (Performance Meters) -01-0103X-00 | |
| DISCONTINUED |
![]() | ARK Design Meter Stand (Performance Meters) -01-0106X-L | |
| DISCONTINUED |
![]() | ARK Design MFD (Performance Meters) -01-0003X-00 | |
| Multi Function Display. Universal unit for connecting to (wiring into) vehicle ECU wiring harness (Suitable for vehicles without OBD connector). For the boost, display delay is eliminated with the built in pressure sensor. Lightweight compact design (Half DIN). Width: 85mm, depth: 10mm (15mm including switch), height: 50mm. High-definition 2.4 inch LCD. High-response and speedy information is displayed graphically. The display graphic can be rotated 180 degrees, so the switch position can be installed on either the right or left. Two types of analog display, single and twin, and four types of digital display are possible. You can select the display graphics that suit your purpose. By using optional sensors, it is possible to display water temperature, oil temperature, oil pressure, etc. at any location. *When installing the optional sensors on the vehicle side, an attachment or adapter is required separately. | DISCONTINUED |
![]() | ARK Design Oil Pressure Sensor (Performance Meters) -01-0102X-00 | |
| DISCONTINUED |
![]() | ARK Design Water/Oil Temperature Sensor (Performance Meters) -01-0101X-00 | |
| DISCONTINUED |
![]() | Blitz MMD i-Color (Performance Meters) -15062 | |
| Multi Function & Multi Angle Display. | DISCONTINUED |
![]() | Blitz Power Meter iD III (Performance Meters) -15086 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 2 (Performance Meters) -44006-AK003 | |
| DISCONTINUED |
![]() | HKS A/F Knock Amp 3 (Performance Meters) -44006-AK004 | |
| 3rd generation of the HKS A/F Knock Amp. Air/fuel and knock monitoring functions in one package with an all new display. High precision measurement of air/fuel ratio using Bosch A/F sensor (Included). Monitor knock through headphones to aid setup of fuelling/ignition with F-CON V Pro or a similar tunable ECU. Knock level threshold can be set and shown in the display by setting knocking conditions. Air-fuel ratio and knock level can be output as voltage signals. Connecting the A/F Knock Amp to an F-CON unit allows controlling the air-fuel ratio feedback, knock retard, etc. Two A/F sensors can be used simultaneously. The main unit can measure 2 different A/F values of the V-bank engine or multi-cylinder engine using 2 sensors. Digital filter is implemented for knocking sensor signal processing. This filter seperates other noises such as engine vibration for improved knock detection. | $ 521.56 |
![]() | HKS A/F Sensor (Performance Meters) -44999-AK022 | |
| For use with HKS A/F Knock Amp 2/3. | $ 143.18 |
![]() | HKS A/F Sensor Harness (Performance Meters) -44999-AK023 | |
| For use with HKS A/F Knock Amp 2/3. | $ 53.42 |
![]() | HKS CAC Cute (Performance Meters) -44007-AK002 | |
| Circuit Attack Counter Cute. A must-have for circuit users who care about every thousandth of a second! Small but smart enough to accurately measure lap times at any time. CAC Cute is a lap time measurement device that is the successor to CIRCUIT ATTACK COUNTER (commonly known as CAC). Wireless and utlising an iOS app (Free - iOS only) make it more convenient. Simply attach the CAC Cute main unit to the vehicle and connect it to the smartphone app "CAC Cute" to measure lap times. The CAC Cute app displays the information necessary to improve lap times in an easy-to-understand interface. A must-have item for those who really enjoy circuit driving. | $ 168.94 |
![]() | HKS CAMP (Performance Meters) -4801-SA001 | |
| Computerized Automobile Multi Player. Screen not included. | DISCONTINUED |
![]() | HKS CAMP Junction Box (Performance Meters) -4801-SA003 | |
| DISCONTINUED |
![]() | HKS O2 Sensor Boss and Bolt Set (Performance Meters) -44999-AK001 | |
| $ 66.77 |
![]() | PIVOT Speed Meter X (Performance Meters) -SML-X | |
| Discontinued. | DISCONTINUED |
![]() | PIVOT Speed Meter Z (Performance Meters) -SML-Z | |
| Discontinued. | DISCONTINUED |
![]() | SARD A/F Device (Performance Meters) -67502 | |
| For use with SARD Analyzer-II. Includes: A/F Sensor, Sensor harness and sensor fitting kit. | $ 611.13 |
![]() | SARD A/F Device A/F Sensor (Performance Meters) -67519 | |
| Part included with A/F Device (repair part). | $ 311.80 |
![]() | SARD A/F Device A/F Sensor Cable (Performance Meters) -67518 | |
| Part included with A/F Device (repair part). | $ 112.25 |
![]() | SARD A/F Device Sensor Fitting (Performance Meters) -67517 | |
| Part included with A/F Device (repair part). | $ 17.46 |
![]() | SARD Analyzer-II (Performance Meters) -67515 | |
| DISCONTINUED |
![]() | TECHTOM G-TECH PRO Competition (Performance Meters) -(GL)ELPMTTGEN01 | |
| Ver. 4.0.1. Discontinued. | DISCONTINUED |
![]() | Apex APEXi Auto Timer (Turbo Timers) -405-A011 | |
| For NA and Turbo. | DISCONTINUED |
![]() | Blitz ASTT-X (Turbo Timers) -14360 | |
| Auto Start Twin Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-DCIV (Turbo Timers) -14369 | |
| Dual Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz DTT-X (Turbo Timers) -14362 | |
| Dual Turbo Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + (Turbo Timers) -15043 | |
| Full Auto Timer Advance +. The long awaited release of the all new Full Auto Turbo Timer is here! By Installing the optional boost sensor (19240 - sold separately), turbo boost can also be shown. Succeeding the FATT DC (FULL AUTO TURBO TIMER DIGITAL COMPACT) series concept, with an all new, compact, slim design. LCD display makes visibility even clearer, and incorporates a matte black body for the luxury look. Combination of 7-segment display with barograph makes various displays and searching a simple operation with only three buttons. Discontinued. | DISCONTINUED |
![]() | Blitz FATT Advance + Boost Sensor Set (Turbo Timers) -15240 | |
| Option part for use with Blitz FATT Advance + for boost pressure display, peak and warning functions. Includes: Sensor, sensor harness and fitting set. | DISCONTINUED |
![]() | Blitz FATT-DCIV (Turbo Timers) -14368 | |
| Full Turbo Timer Digital Compact IV. Black only. Discontinued. | DISCONTINUED |
![]() | Blitz FATT-X (Turbo Timers) -14361 | |
| Full Auto Timer X. Discontinued. | DISCONTINUED |
![]() | Blitz Turbo Timer Harness (Turbo Timers) -51154 | |
| DISCONTINUED |
![]() | HKS Turbo Timer Harness (Turbo Timers) -4103-RT005 | |
| Turbo Timer Harness makes it easy and safe to install HKS Turbo Timers. Take out the key switch wiring connector and connect the HKS Turbo Timer Harness for easy and reliable connection. For use with HKS Turbo Timer Type 0/Type 1/X. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Turbo Timers) -41001-AK009 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: Red color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. | DISCONTINUED |
![]() | HKS Turbo Timer Type 0 (Old) (Turbo Timers) -4101-RA009 | |
| DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Turbo Timers) -41001-AK010 | |
| Timer function: Manual 1, 2 mode Battery voltage indication function: Battery voltage, Peak value indication, ON/OFF of warning function. Back light color: White color text. Hand brake detection safety circuit: The hand brake detection function prevents accident while Turbo Timer is working. Also able to display vehicle speed, engine rpm. Also features stopwatch and laptime functions. | DISCONTINUED |
![]() | HKS Turbo Timer Type 1 (Old) (Turbo Timers) -4101-RA011 | |
| DISCONTINUED |
![]() | HKS Turbo Timer X (Turbo Timers) -41001-AK012 | |
| 10th generation HKS turbo timer boasts simplicity and high operability. Single button control and red LED numerical display simplify operation and improve visibility. 5 time ranges. Selectable between 1, 3, 5, 10, and 30 minutes (Maximum timer duration is 30 minutes). Accurate time duration can be selected by manual setting. Handbrake detective safety circuit. High capacity relay. Timer operation stops under unstable conditions caused by low voltage of battery, etc. Not suitable for push button start vehicles. | $ 66.01 |
![]() | PIVOT ATT (Turbo Timers) -ATT | |
| Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Flat-B (Turbo Timers) -ELTTPVGEN002 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT Full Auto Turbo Time e-timer (Turbo Timers) -ETT-B | |
| DISCONTINUED |
![]() | PIVOT SAT (Turbo Timers) -SAT | |
| Security Auto Timer. | DISCONTINUED |
![]() | PIVOT Super Baby Timer (Turbo Timers) -ELTTPVGEN001 | |
| Full Auto Turbo Timer. | DISCONTINUED |
![]() | PIVOT TTX (Turbo Timers) -TTX | |
| Ultra compact design. | DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer (Turbo Timers) -15500021 | |
| DISCONTINUED |
![]() | TRUST GReddy Full Auto Turbo Timer II (Turbo Timers) -15500022 | |
| Separate type. | DISCONTINUED |
![]() | Daikei Boss Kit (Boss Kits) -NOS-02 | |
| Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 39.68 |
![]() | FET Boss Spacer 10 and 20 (Boss Kits) -(GL)INBKFETGEN01 | |
| DISCONTINUED |
![]() | FET QRS III (Boss Kits) -FQS005 | |
| Quick Release System Generation III. Suitable for Nardi, OMP and MOMO type steering wheels. | $ 177.00 |
![]() | FET QRS III Steering Plate (Boss Kits) -FQS006 | |
| Additional steering plate for use with Quick Release System Generation III. For attachment to second steering wheel to allow for quick changes. Suitable for Nardi, OMP and MOMO type steering wheels. | DISCONTINUED |
![]() | HKB Boss Kit (Boss Kits) -OT-155 | |
| Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 23.36 |
![]() | HKS Q-Release WB Rapfix II Keylock Set (Boss Kits) -51007-AK721 | |
| The Works Bell RAPFIX II KEYLOCK SET is now available in an HKS oil color. This set includes the RAPFIX II steering wheel detachment system, which provides the highest level of safety and convenience, born from the pursuit of speed, and the RAPFIX II KEYLOCK SYSTEM, which prevents vehicle theft and has an audible warning function. Comes with a cover for the key lock system to prevent scratches during storage and to prevent the key cylinder number from being read when installed. Steering boss kit to suit vehicle is required for installation (Sold separately). Vehicles with a steering angle sensor connector at 12 o'clock, such as the BNR32, cannot be used. Limited edition item. | $ 573.84 |
![]() | Night Pager Earth Ring Set (Boss Kits) -(GL)INBKNTPGEN05 | |
| $ 16.38 |
![]() | Night Pager Long Boss Spacer STD (Boss Kits) -(GL)INBKNTPGEN01 | |
| DISCONTINUED |
![]() | Night Pager Steering Smart Phone Holder (Boss Kits) -(GL)INBKNTPGEN06 | |
| Aluminium smart phone holder attachment. Installed between steering wheel and steering wheel boss. Pictured smart phone/universal bicycle silicone smart phone holder not included. | DISCONTINUED |
![]() | SIGNAL Quick Steering Boss (Boss Kits) -(GL)INBKSAGEN01 | |
| For use with regular boss kits (sold separately). | DISCONTINUED |
![]() | TRUST GReddy x Works Bell Rapfix II (Boss Kits) -70723801 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). Laser etched logo. | $ 238.17 |
![]() | TRUST Greddy x Works Bell Rapfix II Key Lock Case (Boss Kits) -18001933 | |
| Minimizes damage to the key lock body when storing or carrying the key lock system when it is not installed in the vehicle. Made of neoprene material with excellent cushioning properties. Since it has a zipper and is compact, it can also be used as a storage space for small items. | $ 32.64 |
![]() | TRUST GReddy x Works Bell Rapfix II Key Lock System +e (Boss Kits) -70723811 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys (serial number matched). | $ 203.78 |
![]() | Works Bell 3-6 Hole Change Adapter (Boss Kits) -103283 | |
| Option for part for use with Works Bell Rapfix GTC-R/Racing (Sold separately) to use MOMO/Nardi type 6 hole steering wheels. | $ 44.72 |
![]() | Works Bell Boss Kit (Boss Kits) -534 | |
| Depending on vehicle, normal, airbag, and/or auto cruise types available. Suitable for 70mm x 6 (MOMO, OMP, SIMONI Racing) and 74mm x 6 (NARDI) PCD type steering wheels. | $ 40.00 |
![]() | Works Bell Rapfix Flipper (Boss Kits) -103260 | |
| Option for part for use with Works Bell Rapfix II (Sold separately) allows steering wheel release without pressing the Rapfix II safety button. | $ 60.79 |
![]() | Works Bell Rapfix GTC (Boss Kits) -103270 | |
| With no loss in safety and design appeal, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease! Patented ball lock system. Duralumin (Alumite treated surface). | $ 245.09 |
![]() | Works Bell Rapfix GTC-R (Boss Kits) -103282 | |
| Single large lever type. For use competition cars, one action allows tilting up of steering wheel. Allows getting in and out of tight seats with ease - Quick driver changes! Patented ball lock system. Aluminium alloy A2024T4 (Ball: Steel SUJ2). | $ 276.53 |
![]() | Works Bell Rapfix II (Boss Kits) -103030 | |
| Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 203.21 |
![]() | Works Bell Rapfix II 13 Pole Insulator (Boss Kits) -(GL)103285 | |
| Optional 13-pole insulator exclusively for Rapfix 2 meets the recent demand for additional switches around the steering wheel in racing and customization scenes. The insulator part on the socket side and plug side are designed speficially for use with Rapfix 2. It is necessary to prepare wiring and terminals separately for connection. Not suitable for Rapfix 2 models prior to 2007/09 (Please contact us for further details). | $ 120.31 |
![]() | Works Bell Rapfix II Security Kit (Boss Kits) -103150 | |
| Rapfix II and Key Lock System set. Steering wheel quick release system. Ideally for use with for use with Works Bell Short Boss (sold separately). | $ 231.87 |
![]() | Works Bell Rapfix Key Lock System (Boss Kits) -101070 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Includes 2 keys. | DISCONTINUED |
![]() | Works Bell Rapfix Key Lock System +e (Boss Kits) -101111 | |
| Option anti theft mechanism for use with Works Bell Rapfix II (Sold separately). Horn will sound if the key lock body is inadvertently pressed. Includes 2 keys. | $ 157.70 |
![]() | Works Bell Rapfix Racing (Boss Kits) -103330 | |
| Steering wheel quick release system for competition cars. | $ 208.50 |
![]() | Works Bell Rapfix Racing Electrode Kit (Boss Kits) -103076 | |
| Option for part for use with Works Bell Rapfix Racing (Weld on type only - sold separately). 12 pole electrodes. Terminals attached and detached with steering wheel. | $ 309.28 |
![]() | Works Bell Short Boss for Rapfix More Info (Boss Kits) -535S | |
| Short type (low height) boss kit ideal for use with Works Bell Rapfix. Suitable for 70mm x 6 PCD (MOMO, OMP, SIMONI Racing) type steering wheels. | $ 63.56 |
![]() | Works Bell Wiring Plate (Boss Kits) -103284 | |
| This product is useful when attaching the RAPFIX2 4 pole type or when pulling out wiring other than the horn from the boss. | $ 18.27 |
![]() | SARD RD-1 (Clusters and Cluster Gauges) -67520 | |
| Racing Display 1. | DISCONTINUED |
![]() | STACK ST8100 (Clusters and Cluster Gauges) -67000 | |
| DISCONTINUED |
![]() | STACK ST8130 (Clusters and Cluster Gauges) -67003 | |
| DISCONTINUED |
![]() | STACK ST8130P (Clusters and Cluster Gauges) -67002 | |
| $ 1530.66 |
![]() | Monster Sport Alumi Heel Plate (Floor Mats) -848100-0000M | |
| Universal heel plate bolting to existing floor mats (Not included). Protects the floor mat from wear, during pedal operation. 2mm thick aluminium (Alumite treated). 240mm x 170mm. Stainless steel button type bolts. | $ 48.09 |
![]() | Blitz Meter Holder (Gauge Mounts) -19160 | |
| $ 17.13 |
![]() | BORDER TRI-EYE Meter Panel (On Board Type) (Gauge Mounts) -ME.3F.H | |
| On dash type. | $ 118.74 |
![]() | Defi Fitting Kit (Gauge Mounts) -DF05301 | |
| Suitable for Defi Link Meters (52, 60 and 80mm). | DISCONTINUED |
![]() | HKS Display Stand (Gauge Mounts) -53002-AK001 | |
| $ 11.97 |
![]() | HKS Meter Cap (Gauge Mounts) -53002-AK002 | |
| $ 8.00 |
![]() | HKS Meter Hood (Gauge Mounts) -5404-SA001 | |
| $ 32.44 |
![]() | HKS Meter Stand (Gauge Mounts) -5404-SA006 | |
| DISCONTINUED |
![]() | OMORi Meter DIN Size Panel (Gauge Mounts) -P-107 | |
| DIN-N size meter panel for 45mm meters. 179x51mm. | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel DX (Gauge Mounts) -P-106 | |
| DIN-DX size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | OMORi Meter DIN Size Panel N (Gauge Mounts) -P-105 | |
| DIN-N size meter panel for 52mm meters. 180x59mm (Slightly larger than 1 DIN size). | DISCONTINUED |
![]() | TRUST GReddy A-Pillar Gauge Mount (Single) (Gauge Mounts) -16003001 | |
| DISCONTINUED |
![]() | TRUST Meter Parts Meter Adjustable Holder (Gauge Mounts) -16400053 | |
| Meter not included. Includes double sided tape. | DISCONTINUED |
![]() | URAS 3 Gauge Meter Panel (Gauge Mounts) -02017-2 | |
| $ 95.49 |
![]() | Apex APEXi Mounting Bracket (General Accessories) -430-A006 | |
| Mounting bracket (General Purpose Stand/Stay) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | Apex APEXi Mounting Bracket II (General Accessories) -430-A017 | |
| Swivel type mounting bracket (General Purpose Stand) for use with APEXi Rev/Speed Meter GP, AVC-R and S-AFC II. | DISCONTINUED |
![]() | CUSCO Spin Turn Knob (Hand Brake Accessories) -00B 014 AR | |
| Push button to elminate hand brake lock and pull out to lock. Aluminium. | $ 20.47 |
![]() | Prodrive Racing Harness (team TECH) (Harnesses) -52304501 | |
| $ 507.57 |
![]() | Prodrive Racing Harness (Willans) (Harnesses) -52304491 | |
| DISCONTINUED |
![]() | Project μ (Mu) Seat Belt Pad (Harnesses) -ACC-SP02 | |
| These seat belt pads feature a zipper closure for easy attachment and reduce the pressure of the seat belt digging into the body. Pair of 2. | $ 48.25 |
![]() | SARD 4 Point Harness (Harnesses) -80221 | |
| FIA-approved 4-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 233.38 |
![]() | SARD 6 Point Harness (Harnesses) -80223 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. Buckle/shoulder belt features SARD logo. | $ 317.15 |
![]() | SARD GR Aero Stabilizing Shoulder Pad (Harnesses) -76013 | |
| $ 29.61 |
![]() | SARD GR Racing Harness (6 Point) (Harnesses) -76023 | |
| FIA-approved 6-point seat belt for competition use. Holds the body firmly even during sports driving with large G-forces. 2 and 3 inch shoulder belts ideal for use with FHR equipment. Adjuster with strap allows quick and easy adjustment of belt length. Rotary buckle allows release with one action. | $ 478.72 |
![]() | SPOON SPORTS Racing Harness (Harnesses) -ALL-81450-000 | |
| $ 519.04 |
![]() | TAKATA Comfort Pads (2 Inch) (Harnesses) -78008-0 | |
| $ 110.55 |
![]() | TAKATA Comfort Pads (3 Inch) (Harnesses) -78008-0 | |
| $ 116.22 |
![]() | TAKATA Crotch Strap (Harnesses) -TK-CS-350 | |
| DISCONTINUED |
![]() | TAKATA DRIFT II Bolt/Bolt (Harnesses) -74001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II N SNAP/SNAP (Harnesses) -74000N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 243.30 |
![]() | TAKATA DRIFT II Snap/Snap (Harnesses) -74000-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Bolt (Harnesses) -74003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT II Wrap/Snap (Harnesses) -74002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 2 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Bolt/Bolt (Harnesses) -70003-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Bolt on). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III N SNAP/SNAP (Harnesses) -70002N-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | $ 362.04 |
![]() | TAKATA DRIFT III Snap/Snap (Harnesses) -70002-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Snap hook). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Bolt (Harnesses) -70005-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Bolt on). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA DRIFT III Wrap/Snap (Harnesses) -70004-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts (Wrap). 2 inch lap belts (Pull up type) (Snap hook). ECE-R 16.04 / DOT FMVSS 209 approved. | DISCONTINUED |
![]() | TAKATA Eye Bolt (Harnesses) -(GL)SG23 | |
| Set of 2. | $ 19.27 |
![]() | TAKATA FORMULA 6 (Harnesses) -73000-0 | |
| 6 point harness. For formula vehicles. 3 inch shoulder belts. 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA FORMULA 6 HANS (Harnesses) -73003-0 | |
| 6 point harness. For formula vehicles. 2/3 inch shoulder belts (HANS compatible). 2 inch lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Bolt on fittings. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340R (Harnesses) -TK-MPH-340R | |
| 4 point harness. FIA Approved. | DISCONTINUED |
![]() | TAKATA MPH-340WR (Harnesses) -TK-MPH-340WR | |
| 4 point harness. FIA Approved. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA MPH-341 (Harnesses) -TK-MPH-341 | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. | DISCONTINUED |
![]() | TAKATA MPH-341W (Harnesses) -TK-MPH-341W | |
| 4 point harness. FIA Approved (8853-98/8854-98). Green only. Includes 4 x Small head short eye bolt. For 2 seater or roll bar harness mounts. | DISCONTINUED |
![]() | TAKATA RACE 2x2 (Harnesses) -94005-0 | |
| FIA8853-2016 approved 6 point harness. FHR (hans) 2 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 484.71 |
![]() | TAKATA RACE 3x2 (Harnesses) -94004-0 | |
| FIA8853-2016 approved 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings. | $ 379.83 |
![]() | TAKATA RACE 4 BOLT (Harnesses) -71001-0 | |
| 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Bolt on fittings. FIA Approved. Optional Anti Sub strap available (Sold separately). | DISCONTINUED |
![]() | TAKATA RACE 4 N SNAP (Harnesses) -71000-0 | |
| FIA approved 4 point harness. Anti Submarine (ASM) System. 3 inch shoulder belts. 2 inch lap belts (Pull up type). Aluminium rotary buckle. Snap hook fittings. Optional Anti Sub strap available (Sold separately). | $ 487.70 |
![]() | TAKATA RACE 6 Anti Sub Strap (Harnesses) -79000-0 | |
| Optional strap for TAKATA RACE 4 (Becomes 6 point harness). T-bar style. FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 (Harnesses) -72000-0 | |
| 6 point harness. 3 inch shoulder belts. 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-2 HANS (Harnesses) -72003-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 2 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 (Harnesses) -72004-0 | |
| 6 point harness. 3 inch shoulder belts. 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA RACE 6-3 HANS (Harnesses) -72005-0 | |
| 6 point harness. 2/3 inch shoulder belts (HANS compatible). 3 inch pull down adjuster lap belts. Aluminium rotary buckle. T-bar style Anti Sub strap. Snap hook fittings (Bolt On option kit sold separately). FIA Approved. | DISCONTINUED |
![]() | TAKATA Shoulder Pads (Harnesses) -SP-301 | |
| Pair. | DISCONTINUED |
![]() | TAKATA Stress Plate (Harnesses) -STP-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Shoulder Pad (Harnesses) -18001988 | |
| Pair. | $ 21.10 |
![]() | TRUST GReddy Sports Harness (Harnesses) -16500004 | |
| 4 x 4 point harness. | DISCONTINUED |
![]() | OKUYAMA DASH Heel Adjust Plate (Other) -315 015 0 | |
| Driver's side floor plate. RHD vehicles only. | DISCONTINUED |
![]() | OKUYAMA CARBING Passenger Plate More Info (Other) -420 001 0 | |
| 3mm aluminium. Attatched to floor carpet by velcro tape. | $ 108.15 |
![]() | BRIDE FO Type Super Seat Rail (Seat Accessories) -T109FO | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA seats. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. | $ 101.78 |
![]() | BRIDE FX Type Super Seat Rail (Seat Accessories) -T109FX | |
| For use with BRIDE full bucket seats. Including edirb 031/042/061. Not suitable for ZIEG IV WIDE, ZETA III Type-XL and ZODIA. Also suitable for: - RECARO - SP-G. - SPARCO - Prodrive. - AAR Racing. - Cobra. - Other full bucket seats within size limits of seat rail. Aluminium side brackets. Fixed type. FIA approved. | $ 146.14 |
![]() | BRIDE Import Side Stay (Seat Accessories) -A35NPO | |
| Import side brackets. For use with BRIDE RO/RB/RK type seat rails (sold separately) to special size full bucket seats. Not suitable for use with RX type seat rails. Suitable for: RECARO: SPG-N, Pole Position. SPARCO: Corsa, RevII, Pro2000, Evo. | $ 45.70 |
![]() | BRIDE MO Type Super Seat Rail (Seat Accessories) -T109MO | |
| For use with BRIDE reclinable seats. EUROSTER series, STREAMS series, DIGO series, ZAOU, edirb 032/054, edirb 110/132, EURO II series, BRIX (Old), ERGO (Old), XAX (Old), REVS. Also suitable for: - SPARCO - Star 2, Torino 2, Milano 2, Monza, Sportivo, Speed, Sprint. | $ 134.04 |
![]() | BRIDE RO Type Super Seat Rail (Seat Accessories) -T109RO | |
| For use with BRIDE reclinable seats. GIAS series, STRADIA series, deirb 023/033, CUGA series, VORGA series, BRIX2, ERGO2, XAX2, PROS. Super Low Position (maximum -30mm). Also suitable for: - RECARO - SR series, L series. - GULL (Love Lark). - D&W. Also suitable for (with BRIDE Import Side Stay - Sold separately): - RECARO - SPG-N. - Sparco - Corsa, Rev II, Pro 2000, Evo. | $ 131.37 |
![]() | BRIDE Side Stay (Seat Accessories) -A02NPO | |
| $ 32.31 |
![]() | BRIDE XL Type Super Seat Rail (Seat Accessories) -T109XL | |
| For use with BRIDE ZIEG IV WIDE, ZETA III type-XL seats. Super low position (maximum -30mm). | $ 171.52 |
![]() | BRIDE YO Type Super Seat Rail (Seat Accessories) -T109YO | |
| For use with BRIDE reclinable seats (BRIX, ERGO, XAX, REVS). Super Low Position (maximum -30mm). | DISCONTINUED |
![]() | East Bear Seat Protector (Seat Accessories) -(GL)INSAEBRGEN001 | |
| DISCONTINUED |
![]() | RECARO Side Protector (Seat Accessories) -7216966 | |
| For protection of the side cushion fabric when getting in and out of bucket seats. For full bucket seats. Single unit. Suitable for use on left or right sides. | $ 61.10 |
![]() | Prodrive Competition Seat (Seats) -55660011 | |
| Carbon aramid super monocoque shell. The simple design of the competition seat, which does not have a reclining mechanism, achieves both high rigidity and light weight at a high level. The shoulder and seat surface, which uses Prodrive's special high-class buckskin, provide stable hold performance without slipping, and the two-piece support on the seat surface promises stress-free pedal work.. Seat rails sold separately. | DISCONTINUED |
![]() | TRUST GREX Shift Knob (Shift Knobs) -14510501 | |
| DISCONTINUED |
![]() | TRUST GREX Type SH Shift Knob (Shift Knobs) -14510530 | |
| Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
![]() | TRUST GREX Type SL Shift Knob (Shift Knobs) -14510531 | |
| Includes red, white and blue shift pattern stickers. 5 speed only. | DISCONTINUED |
![]() | C's Short Stroke Shift (Shifter Kits) -110200 | |
| DISCONTINUED |
![]() | TRD Quick Shift Lever Set (Shifter Kits) -33530-JX000 | |
| DISCONTINUED |
![]() | Blitz Sports Steering Wheel (Steering Wheels) -13530 | |
| DISCONTINUED |
![]() | CUSCO Racing Steering Wheel (Steering Wheels) -00B 763 A330 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 299.83 |
![]() | HKS 50th Steering Wheel NARDI Sports 34S (Steering Wheels) -51007-AK534 | |
| Limited edition HKS x NARDI collaboration model steering wheel. Special specification CLASSIC SPORTS TYPE A - 340mm. The dimpled black punching leather is a sports use model with excellent grip. It is a masterpiece made by hand by authentic Italian craftsmen with cross-stitch in the three HKS oil colors and classic type HKS original horn button. Pre order period March 24~April 30 2023. Delivery expected November 2023. | DISCONTINUED |
![]() | Mine's D-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-01 | |
| D shape steering wheel. | $ 453.53 |
![]() | Mine's R-S Steering (Steering Wheels) -(GL)INSW-MNW-GEN-03 | |
| Round shape steering wheel. | $ 535.42 |
![]() | MOMO MOD.08 (Steering Wheels) -M-58 | |
| Model 08 features a plain steering grip with no bumps to support quick steering work. The 90mm deep cone boasts the deepest dish in the MOMO steering wheel range, offsetting the wheel towards the driver by about 50mm compared to the general model (37mm) elliviating the need for boss kit spacers. The grip part has a shape close to a perfect circle of about 30 mm that makes it easy to apply force, and the operation feeling when wearing racing gloves is outstanding. It is stable when holding with both hands but also when holding the steering with one hand when using the hand/side/emergency brake. 350mm. 90mm dish. | $ 213.85 |
![]() | Nardi Personal Blitz (Steering Wheels) -P071 | |
| Grip: Black polyurethane. Spoke: Black. Horn Button: Yellow logo. | DISCONTINUED |
![]() | Nardi Personal Blitz Leather (Steering Wheels) -P075 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Silver logo. | $ 221.09 |
![]() | Nardi Classic Deep Cone - Punching Leather (Steering Wheels) -N753 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 278.42 |
![]() | Nardi Classic Deep Cone - Suede (Steering Wheels) -N754 | |
| Deep Corn. Grip: Black suede, red stitch. Spoke: Black. | $ 224.87 |
![]() | Nardi Personal Neo Grinta (Steering Wheels) -P024 | |
| Grip: Black leather, red stitch. Spoke: Black. Horn Button: Red logo. | $ 267.71 |
![]() | Nardi Personal Pole Position (Steering Wheels) -P002 | |
| Grip: Black leather, black suede, silver embroided logo. Spoke: Black. Horn Button: Silver logo. | $ 203.46 |
![]() | Nardi Classic Punching Leather (Steering Wheels) -N005 | |
| Developed for sports use. Punching leather with dimples applied to the entire rim is used to enhance grip. | $ 203.46 |
![]() | Nardi Classic Smooth Leather (Steering Wheels) -N111 | |
| High-quality genuine leather and traditionally hand-sewn by craftsmen. The more you use it, the more it fits in the pilot's hands, and every time you clear a corner, the sense of unity with your car increases. | $ 278.42 |
![]() | Nardi Classic Suede Leather (Steering Wheels) -N115 | |
| Developed on the premise of using a racing gloves in competition use. Suede leather used throughout the rim provides the best grip. | $ 203.46 |
![]() | Nardi Personal Trophy (Steering Wheels) -P051 | |
| Grip: Black leather, yellow stitch, yellow embroided logo, yellow top mark. Spoke: Black. Horn Button: Yellow logo. | $ 240.94 |
![]() | R Magic RM Steering Vol. 4 (Steering Wheels) -stea4 | |
| Vol.4 (Version 4) of R Magic's steering wheel. ATS collaboration, limited production item. 32.5mm diameter. Includes horn button. Red stitching. First delivery expected early May 2018. | DISCONTINUED |
![]() | SARD Steering - D-shape (Steering Wheels) -80219 | |
| 345 x 320 mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 310.54 |
![]() | SARD Steering - Semi Deep (Steering Wheels) -80227 | |
| 345mm (65mm deep). NARDI type (PCD 74mm) Steering boss (hub) kit is required for installation (Sold separately). | $ 359.04 |
![]() | TOMEI MOMO MOD.08 (Steering Wheels) -763034 | |
| TOMEI x MOMO collaboration MOD.08 model steering wheel. The center mark is a chic grey, with the TOMEI logo embroidered on the spokes and the mark embroidered on the bottom of the grip. The included horn button also has a design unique to this collaboration. | $ 428.33 |
![]() | Top Secret Steering Wheel (Steering Wheels) -(GL)INSW-TOP-GEN-01 | |
| DISCONTINUED |
![]() | TRUST GReddy Sports Steering (Steering Wheels) -16600001 | |
| Sports steering wheel. GReddy coloured stitching, high-quality leather on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 203.46 |
![]() | TRUST GReddy x MOMO Sports Steering (Steering Wheels) -36600003 (MOMO: 16500212 Old: 16600012) | |
| Steering boss (hub) kit is required for installation (Sold separately). | DISCONTINUED |
![]() | TRUST GReddy Sports Steering Real Carbon (Steering Wheels) -16600007 | |
| Sports steering wheel. Black leather, black real carbon, black stitching with black alumite spokes. | $ 348.02 |
![]() | TRUST GReddy Sports Steering Suede (Steering Wheels) -16600013 | |
| Sports steering wheel. GReddy coloured stitching, ultra suede on rim, and the three centre spokes anodized black. Steering boss (hub) kit is required for installation (Sold separately). | $ 294.48 |
![]() | TRUST GReddy Sports Steering Wood Type (Steering Wheels) -16600008 | |
| Steering boss (hub) kit is required for installation (Sold separately). | $ 267.71 |
![]() | TRUST GReddy Steering Titan Bolt (Steering Wheels) -16600006 | |
| Titanium bolts for TRUST GReddy Sports Steering Wheels. | $ 37.98 |
![]() | Apex APEXi Power Intake Kit More Info (Air Filters) -507-T005 | |
| Air filter with minimal air-flow restriction. Dual funnel filter system minimizes intake turbulence. Vehicle specific kits include adapters and other fitting parts. The Power Intake is the premier air filter designed to create pure horsepower. The intake funnels used in racing machines take advantage of a characteristic where air travels along the side of the side of surfaces. However, the center portion of the funnel is virtually unused. It is this concept that gave birth to the Dual Funnel design. A primary funnel on the top portion of the air cleaner was inserted to channel the air flow directly into the lower funnels at the base of the cleaner. This design was a huge success on the former Super Intake model. The Power Intake took this design and improved the flow characteristics. New funnel design, element material and air flow channeling characteristics make the Power Intake one of the most efficient air cleaners on the market today. By constructing the upper and lower funnel from a highly durable injected resin, engineers were able to construct the ideal shaped funnel previously not possible with the stainless steel material. Funnel shapes focused on increasing air speed without changing the flow direction of the intake air. The result is a high speed and smooth flow of air into the intake. The lower funnel has been engineered at a 14 degree curve for maximum efficiency. Also, the lower funnel position has been made even closer to the base of the cleaner to reduce drag and eliminate any _dead spotsb within the cleaner. The Power Intake incorporates a newly developed material (layer filter of dry density fibers) which improves the element density. This allows maximum protection from foreign materials entering the engine. Compared with past model, the Power Intake has also succeeded in decreasing its ventilation resistance by about 10% (pressure loss) for maximum performance and protection. The Power Intake is dry-type filter and is touble free. Some of the problems associated with wet type cleaners, such as oil sticking to the air flow meter, are a thing of the past. The Power Intake is basically maintenance free. Filter replacement, when necessary, can be done at a very low cost. | DISCONTINUED |
![]() | Blitz Advance Power Cleaner More Info (Air Filters) -42058 | |
| Superceding the BLITZ Sonic Power Cleaner, the new Blitz Advance Power Cleaner uses a stainless steel mesh filter that produces high inhalation efficiency and racy intake sound. Cooling shield with large diameter funnel shields radiant heat from the engine bay, preventing heat soak of the filter. By suppressing the rise in the temperature of the filter, high filling efficiency is maintainted providing a stable suction temperature. With the variable shield structure, it is possible to secure a large amount of air around the filter, and it is effective for instantaneous increase of intake air. Large diameter funnels efficiently supply a large amount of air, achieving high suction efficiency. Cooling shield made of aluminum, with blue anodized lock plate. | DISCONTINUED |
![]() | Blitz Carbon Power Air Cleaner More Info (Air Filters) -35058 | |
| Uses the highly acclaimed stainless mesh filter from SUS Power/Advance Power air cleaners. Conical body with "M" folds maximise the intake area, while balancing dust collecting ability with intake efficiency. The carbon shield deflects surrounding heat, preventing intake air temperature from rising. Being made from carbon, the shield itself emits very little heat. With proper care and maintenance, the stainless mesh filter can be used indefinitely. | DISCONTINUED |
![]() | Blitz Sonic Power Air Cleaner (Air Filters) -58058 | |
| DISCONTINUED |
![]() | Blitz SUS Power Air Cleaner More Info (Air Filters) -26058 | |
| Stainless steel mesh filter suitable for over 1000 PS. SUS 304 stainless mesh shell & matrix structure like that used in Formula 1. Conical body which maximizes suction area. By adopting a mesh with a different matrix structure for the top and side, high dust collection effect and inhalation efficiency up are achieved. By drastically reducing inhalation resistance, a sharp engine sound and racy intake sound is achieved. Reusable - Once washed, it can be used any number of times. | DISCONTINUED |
![]() | Blitz SUS Power Core Type LM More Info (Air Filters) -56058 | |
| Filter colour: blue. | DISCONTINUED |
![]() | Blitz SUS Power Core Type LM Red More Info (Air Filters) -59058 | |
| Filter colour: red. | DISCONTINUED |
![]() | HKS Super Power Flow (Air Filters) -70019-AT104 | |
| Infamously known as the "invisible filter", the Super Power Flow Filter has further evolved utilising the new hyper stealth frame. Opening area enlarged by about 27% over the super stealth frame used in the previous Super Power Flow Reloaded filters, intake efficiency is further improved. Vehicle specific kits include adapters and other fitting parts. | $ 100.03 |
![]() | HKS Super Power Flow (Old) (Air Filters) -1504-ST015 | |
| DISCONTINUED |
![]() | HKS Super Power Flow Reloaded (Air Filters) -70019-AT015 | |
| DISCONTINUED |
![]() | Night Pager Twin Cleaner Kit (Air Filters) -(GL)INAFNPJZZ3001 | |
| TRUST AIRINX Air Filters. | DISCONTINUED |
![]() | TRUST GReddy AIRINX B-Type (Air Filters) -12511014 (TY-M014B) | |
| Car specific kit using a 3D hemispherical high efficiency filter body. Combined with the 2 layer filter, both filtering performance, and air flow efficiency are improved. | DISCONTINUED |
![]() | Apex APEXi Power Intake Filter More Info (Air Filters (Panel/OEM) Type) -503-T103 | |
| Factory replacement filter featuring: Progressive-density filter element improves power and efficiency, without compromising ability to filter dust and dirt. Dry-type filter element requires no oiling, and will not foul air flow sensors. Ideal for light-tune cars, and cars that develop problems with idle and throttle response issues when the factory air box is removed. Easy intallation, cleaning, and maintenance. | DISCONTINUED |
![]() | Blitz SUS Power Air Filter LM (Air Filters (Panel/OEM) Type) -ST-36B 59502 | |
| Standard air filter replacement using dry type special fiber material (fabric) and mesh filter as used in proven SUS POWER core type air cleaners. Highly durable and strong due to the stainless steel coated material. In addition, the two layer structure reduces pressure loss, further improving suction efficiency while effective in collection of dust and other particles. | $ 23.97 |
![]() | TRD Sports Air Filter (Air Filters (Panel/OEM) Type) -17801-JA810 | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Flange (Blow Off Valves and Kits) -BOVNSDAAL | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Funnel (Blow Off Valves and Kits) -BOVNSF1 | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Gasket (Blow Off Valves and Kits) -BOVGK | |
| DISCONTINUED |
![]() | ARC Super Blow Off Valve Type NS (Blow Off Valves and Kits) -BOV00NS4 | |
| DISCONTINUED |
![]() | Blitz Super Sound Blow Off Valve BR (Blow Off Valves and Kits) -70645 | |
| Vehicle specific kit. Super Sound Blow Off Valve BR (Blow Response). High quality aluminum die-cast body. High precision CNC machining optimizes the clearances, achieving smooth and responsive piston movement. The piston itself has a coating to improve corrosion resistance, as well as providing excellent lubrication performance even in tight clearances. Special black coating and anodized red highlights are resistant to corrosion and ideal for dressing up the engine room. Revision of the venturi design of the funnel has increased the flow rate by 17%, while creating a sharper, more powerful opening sound than the previous model. | $ 193.25 |
![]() | Blitz Super Sound Blow Off Valve DD Kit (Blow Off Valves and Kits) -70045 | |
| DISCONTINUED |
![]() | Blitz Super Sound Blow Off Valve VD Kit More Info (Blow Off Valves and Kits) -70145 | |
| Vehicle specific kit. Venturi Drive valve. Employs the dual drive mechanism from the previous Super Sound Blow Off Valve DD. Funnel is venturi shaped to create sharp, dynamic sound. High quality die cast aluminium. Dissipates heat effectively through the ribs on the main body and funnel. 36mm big valve (with rubber) ensures sealing even in high boost applications. Piston is coated with special lubricating agent to prevent dirt/dust from damaging the piston. | DISCONTINUED |
![]() | HKS Super SQV II Kit (Blow Off Valves and Kits) -71004-AT002 | |
| DISCONTINUED |
![]() | HKS Super SQV Kit (Blow Off Valves and Kits) -1421-ST002 | |
| DISCONTINUED |
![]() | SARD R2D2 Blow Off Valve Kit (Blow Off Valves and Kits) -66100 | |
| Racing Blow Off Twin Drive Type-2 (Angle Type). | DISCONTINUED |
![]() | SARD Racing Blow Off Valve Kit (Blow Off Valves and Kits) -66060 | |
| DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve FV Kit More Info (Blow Off Valves and Kits) -11511211 (BFV-106) | |
| Vehicle specific kit. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. | $ 184.72 |
![]() | TRUST GReddy Blow Off Valve Type FV More Info (Blow Off Valves and Kits) -11501665 | |
| Universal. Blow off valve unit only. The new generation TRUST GReddy BLOW OFF VALVE FV has adapted floating valve structure which does not open up when the surge tank (intake manifold) has negative pressure. Without strong initial load, both quick response under low boost and prevention of the relief under high pressure are achieved. Adjustable floating valve, revised funnel outlet (Blue). Floating valve design with opposing springs, alows for improved control, response and idle. New top hat design allows for rotating of the vacuum nipple without disassmebling of the unit. Suitable for 100~420HP. Compatiable with standard 2-bolt GReddy BOV flanges and Type-RZ outlet adapters. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type FV2 (Blow Off Valves and Kits) -11501672 | |
| Universal. Blow off valve unit only. GReddy Blow Off Valve FV2 inherits the floating valve structure that was popular in the previous model, while being improved with a more sophisticated design providing better maintainability and reliability. A fidget spinner is used to adjust the spring preload without tools and the hose union direction of the top cover can be adjusted 360° without tools. Can directly replace GReddy Blow Off Valve Type RS, RZ, and FV as the mounting flange and opening have the same dimensions. | $ 164.88 |
![]() | TRUST GReddy Blow Off Valve Type R More Info (Blow Off Valves and Kits) -11501660 | |
| Universal. Blow off valve unit only. | $ 152.37 |
![]() | TRUST GReddy Blow Off Valve Type RS Adapter Set (Blow Off Valves and Kits) -11511106 | |
| Vehicle specific kit. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type RZ Adapter Set (Blow Off Valves and Kits) -11511201 | |
| Vehicle specific kit. | DISCONTINUED |
![]() | TRUST GReddy Blow Off Valve Type S Adapter Set (Blow Off Valves and Kits) -11511012 | |
| Vehicle specific kit. | DISCONTINUED |
![]() | HKS Piping Kit More Info (Piping) -1302-ST005 | |
| For better durability and consistent boost pressure even under high boost conditions. Satndard plastic or rubber intercooler pipes can expand or crack under high boost levels. In addition to this, standard pipes have many bends which in some places are very tight radius which causes a lot of flow resistance and pressure drops. HKS Piping Kits are made of aluminum for increased durability and safety. The pipes have been redesigned to decrease the number of bends and to increase bend radius to minimize pressure loss and flow resistance. | DISCONTINUED |
![]() | Night Pager Aluminium Intake Pipe Set (Piping) -(GL)INPGNPJZZ3001 | |
| DISCONTINUED |
![]() | HKS Racing Catalyzer (Catalytic Converters / Straight Pipes) -33005-RK001 | |
| Metal catalyzer for race use. Suitable for use in various scenes with consideration for the environment. * This product does not conform with safety standards, therefore driving on public roads with this product is prohibited. Large Opening Area and Higher Durability. Higher durability is provided since brazing is not chosen to avoid melting. The opening area is larger keeping back pressure at an extremely low level. | DISCONTINUED |
![]() | SARD Sports Catalyzer (Catalytic Converters / Straight Pipes) -89080 | |
| Sports catalytic converter for high power and high response. Vehicle specific models feature either a 200/180cpsi large metal honeycomb structure cell (withstands 1200°C, made in Japan), heat plate (shield) precision welded into a unit designed to replace the standard unit. | $ 696.04 |
![]() | Blitz NUR-SPEC R (Exhaust Systems (Cat Back)) -MT3140 | |
| Straight type competition use model ideal for circuit use. Exhaust system with removable silencer to adjust power output and volume. Maximum performnace in closed circuits when silencer is removed, decreased volume with silencer installed for street use. Fully constructed using SUS 304 stainless steel for looks and maximum durability. | DISCONTINUED |
![]() | GP Sports EXAS EVO Tune (Exhaust Systems (Cat Back)) -250114 | |
| $ 633.05 |
![]() | HKS silent Hi-Power (Exhaust Systems (Cat Back)) -31019-AT006 | |
| High quality sound. Sport exhaust system with reduced noise level. Silent Hi-Power mufflers offer high performance and sporty appearance, with the added benefit of reduced noise levels making it the best choice for more mature enthusiasts. Silent Hi-Power mufflers are constructed entirely of SUS304 grade stainless steel for high lustre, and long lasting performance. For certain applications, HKS has introduced the "Silent Chamber" which removes a lot of the lower frequency noise that can often be heard into the cabin even when cruising. The silent chamber removes this uncomfortable noise but due to its closed end design, where only a minimal amount of exhaust gas flows into it, meaning that the disruption to exhaust gas flow through the entire system is minimized and there is no harm to performance. | DISCONTINUED |
![]() | KAKIMOTO Racing HYPER FULLMEGA N1+REV (Exhaust Systems (Cat Back)) -T31306 | |
| Race muffler, redesigned to be JASMA compliant. | $ 604.70 |
![]() | KAKIMOTO Racing Inner Silencer (Exhaust Systems (Cat Back)) -NIS001 | |
| $ 34.01 |
![]() | Apex APEXi GT Spec. Front Pipe (Front and Centre Pipes) -145-T003 | |
| SUS304. | $ 274.64 |
![]() | HKS Front Pipe (Front and Centre Pipes) -3103-RT006 | |
| HKS Front Pipe pulls out potential power from turbocharged vehicles. Diameter of pipe was studied and selected for each vehicle, engine performance and characteristics. Pipe is designed as straight as possible to reduce secondary exhaust gas pressure. Response of turbocharger is improved, and potential power of turbocharged vehicle comes out. | $ 151.49 |
![]() | KAKIMOTO Racing Front Pipe (Front and Centre Pipes) -TF345 | |
| $ 238.73 |
![]() | Apex APEXi GT Spec Reserve Tank (Breather Tanks) -573-A002 | |
| The GT Reservoir Tank is manufactured with the highest quality fabrication. When setup correctly, the hand welded aluminum tank is not just a reservoir but serves as an air separation tank with built-in partitions. Each tank includes its own APEX reservoir cap, as well as all appropriate hoses and hardware for ease of installation. | DISCONTINUED |
![]() | Apex APEXi GT-Spec Radiator Cap (Breather Tanks) -591-A001 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | ARC Super Micro Conditioner Series Air Remover Tank Set (Breather Tanks) -ERT32 | |
| DISCONTINUED |
![]() | Billion Universal Header Tank Set (Breather Tanks) -BR-HT21S | |
| DISCONTINUED |
![]() | Billion Universal Swirl Pot Set (Breather Tanks) -BR-SP21S | |
| DISCONTINUED |
![]() | OKUYAMA CARBING Combination Hose Adatper More Info (Breather Tanks) -221 308 0 | |
| Combination hose adaptor takes both reserve tank return hose and water temperature sensor (1/8 PT) fitting. | $ 38.99 |
![]() | OKUYAMA CARBING Radiator Reservoir Tank More Info (Breather Tanks) -220 002 0 | |
| Engine coolant cavitatation occurs during higher than normal engine rpm during sports driving. Cavitation cause unstable cooling system pressure and can lead to overheating. Cavitation may also cause serious damage such as cavitation damage (erosion of cooling system). OKUYAMA CARBING Radiator Reservoir Tank prevents from cavitation from occuring, avoiding these problems. Removal of cavitation (bubbles) stabilizes the pressure of the cooling system, controls the water temperature rise, and ultimately increases the cooling efficiency of the radiator. Cavitation is bubbles generated as the coolant temperature rises during sports driving, when the engine rotates at a higher speed than usual. | $ 210.76 |
![]() | SARD Breather Tank Kit More Info (Breather Tanks) -29214 | |
| All aluminium breather tank. Optimized structure removes air bubbles from engine coolant even more than existing breather tanks. The nipple part is removable screw type, and by combining with optional AN fittings (Sold separately), will correspond to various layouts and car models. Includes: Breather Tank (65mm diameter x 148mm), 8mm silione hose (2m), radiator cap, radiator seal cap and bracket. Please confirm radiator cap type on the vehicle to which the breather tank is to be installed. | $ 171.33 |
![]() | SARD Breather Tank Kit (Old) (Breather Tanks) -29209 / 29210 | |
| Includes: Breather Tank (67mm diameter x 180mm), 8mm silione hose (2m), radiator cap, radiator seal cap and bracket. | DISCONTINUED |
![]() | SARD Lower Hose Adapter (Breather Tanks) -19434 | |
| Includes: Adapter, 9mm-M14 nipple, 2 x hose bands and washer. | $ 25.67 |
![]() | TRUST GReddy Breather Tank More Info (Breather Tanks) -12400908 | |
| Remove air bubbles from radiator coolant for improved cooling efficiency. | DISCONTINUED |
![]() | TRUST GReddy Breather Tank Option Part (Breather Tanks) -11900626 | |
| $ 13.04 |
![]() | TRUST GReddy Radiator Filler Seal Cap (Breather Tanks) -12400906 | |
| As included with TRUST Breather Tank. For sealing of standard radiator filler when using separate breather tank. | $ 10.68 |
![]() | CUSCO Transmission/Differential Oil Cooler Kit (Differential Oil Coolers) -00B 013 A | |
| Universal gear oil cooler kit. | $ 792.41 |
![]() | HPI Differential Oil Cooler (Differential Oil Coolers) -HPDOC-AN610 | |
| Universal differential oil cooler kit. | $ 776.35 |
![]() | Kinokuni Rear Differential Oil Cooler Kit (Differential Oil Coolers) -KDT-001R | |
| $ 655.44 |
![]() | ARC Intercooler Kit (Front Mount Type) More Info (Intercoolers) -M073JZZ30F03 | |
| DISCONTINUED |
![]() | ARC Intercooler Kit (Standard Replacement Type) More Info (Intercoolers) -M105JZZ30G03 | |
| DISCONTINUED |
![]() | HKS S TYPE Intercooler Kit (Intercoolers) -13001-AT005 | |
| S TYPE is designed for street use; ideal for stock vehicles, lightly tuned vehicles, and for vehicles with stock replacement type turbines. The engine response under street driving and performance at a mid to high speed range are well-balanced. Core features: Inner fins 1. Short type - We have adopted short type that the pitch is optimized for fin shape, for small and light to improve the cooling efficiency. 2. Triangular straight type - We adopted triangular straight type for less pressure loss of air flow. Outer Fins (triangular louver type) - Cooling efficiency improved with louver because of the shorter length and angle of the fin. - Wide surface of louver make it more efficient in cooling. Aluminium polished piping type kits available for some models. | DISCONTINUED |
![]() | HPI EVOLVE Hi-SPEC Intercooler Kit (Intercoolers) -HPICE-7JZZ30 | |
| Low resistance, lightweight core suitable for applications with standard replacement (bolt on) turbos. ~approx 500PS. Kits include (new type) black silicone hose, spring clamp hose bands, aluminium piping (where applicable) and all other fitting parts. | DISCONTINUED |
![]() | HPI Intercooler Kit EVOLUTION II (Intercoolers) -HP2IC-7JZZ30 | |
| DISCONTINUED |
![]() | HPI EVOLVE Intercooler Kit spec-R (Intercoolers) -HP3ICE-T0101 | |
| Low resistance, lightweight core suitable for applications with standard replacement (bolt on) turbos. ~approx 500PS. Kits include silicone hose(s), hose bands, aluminium piping (where applicable) and all other fitting parts. | $ 556.83 |
![]() | HPI EVOLVE Intercooler Kit spec-S (Intercoolers) -HPIC-T0101 | |
| Street~Hard Sports use. Suitable for applications with standard turbo with increased boost. ~approx 300PS. Kits include silicone hose(s), hose bands, aluminium piping (where applicable), hose bands and all other fitting parts. | $ 374.79 |
![]() | HPI STD-SPEC Intercooler Kit (Intercoolers) -HPIC-7JZZ30 | |
| Street~Hard Sports use. Suitable for applications with standard turbo with increased boost. ~approx 300PS. Kits include silicone hose (blue), aluminium piping (where applicable), hose bands and all other fitting parts. | DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit (Intercoolers) -12010056 | |
| Recommended for sports turbine~full tune applications. Lightweight intercooler core (tube type, offset inner fin) design focused on cooling efficiency, maximizing filling efficiency (reduced pressure loss), in high power/high boost. - SPEC-R HG: Mirror finish side tanks, buff finish aluminium piping. - SPEC-R: barrel finish tanks and aluminium piping. Cores are CCP treated for increased corrosion resistance. | DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit SPEC-LS (Intercoolers) -12010466 | |
| Recommended for increased boost, and sports turbine applications. Lighweight core (inner fin), excellent cooling performance, and high response, all at low cost. Core features straight hole type inner fins which weigh less, and have less pressure loss than offset type inner fins in other manufacturers intercooler kits. Barrel finished side tanks and aluminium piping. | $ 230.54 |
![]() | TRUST GReddy Intercooler Kit SPEC-M (Intercoolers) -12010447 | |
| DISCONTINUED |
![]() | TRUST GReddy Intercooler Kit SPEC-R (Intercoolers) -12010417 | |
| $ 564.45 |
![]() | TRUST GReddy Intercooler Kit SPEC-R HG (Intercoolers) -12010419 | |
| $ 685.02 |
![]() | TRUST GReddy Intercooler Kit SPEC-V (Intercoolers) -12010421 | |
| $ 542.53 |
![]() | Blitz Racing Oil Cooler Universal Kit RD (Oil Coolers) -10332 | |
| Universal oil cooler kit featuring drone cup style core. | DISCONTINUED |
![]() | TRUST GReddy Oil Cooler Kit (Standard Type) (Oil Coolers) -12014617 | |
| $ 335.74 |
![]() | ARC Cool Fin (Other) -19004-10187 (Old: CF310) | |
| W95mm x H10mm x L100mm. Includes heat conduction double sided tape (W95mm x L100mm). | $ 23.56 |
![]() | ARC Wind Master (Flat Type) More Info (Other) -WMF-B03 | |
| 1 piece. | DISCONTINUED |
![]() | ARC Wind Master (Offset Type) More Info (Other) -WMO-B03 | |
| 1 piece. | DISCONTINUED |
![]() | TRUST Gear Oil Pump (Other) -12004820 | |
| Universal gear oil pump. Output pressure: 0.5bar (0.5kgf/cm2). Output volume: 160L/h (2.66L/min). IN: 15mm hose, OUT: 8mm hose. Suitable for use with differential and transmission coolers. | $ 257.00 |
![]() | TRUST GReddy Oil Element Relocation Kit (Other) -12014905 | |
| Oil filter relocation kit. | $ 151.49 |
![]() | TRUST GReddy Washer Tank (Other) -13506101 | |
| Kangaroo (Pouch) type. Universal. 1.0L (approx). Includes: Nozzle, bracket, tube and switch. For relocation of washer tank in engine bays with tight clearances. | $ 28.35 |
![]() | HKS Radiator Cap More Info (Radiator Caps) -15009-AK005 | |
| Silicone rubber seal improves sealing properties. This radiator cap can support the reliable cooling performance under severe driving conditions. | $ 19.72 |
![]() | SARD High Pressure Radiator Cap (Radiator Caps) -61006 | |
| $ 21.10 |
![]() | TRD Radiator Cap (Radiator Caps) -MS143-18001 (Old: 16401-SP030) | |
| $ 30.24 |
![]() | TRUST GReddy Radiator Cap (Radiator Caps) -13901003 | |
| The TRUST Greddy High Pressure Radiator Cap raises the boiling point by increasing the opening pressure of the main pressure valve compared to the standard cap. The temperature difference compared to the external temperature is increased reducing chances of overheating while improving cooling effect. 1.3 kg/cm2 (127kPa). Rust-resistant stainless steel body. Silicon rubber seal which is superior in heat and corrosion resistance. Made in Japan. | $ 19.53 |
![]() | TRUST GReddy Radiator Cap (Old) (Radiator Caps) -13901001 | |
| 1.3 kg/cm2 (127kPa). | DISCONTINUED |
![]() | APP Radiator Hose System (Radiator Pipes and Hoses) -TZ030-UR | |
| Stainless mesh braided radiator hose. Billet aluminium mechanical clamp fittings. Reduces chances of hose breakage and coolant leaks, especially under harsh operating conditions (high engine rpm etc). | $ 87.30 |
| Night Pager Silicone Hose Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZZ3003 | ||
| For use with Night Pager Stain Upper Hose. | DISCONTINUED |
![]() | Night Pager Stain Upper Hose (Radiator Pipes and Hoses) -(GL)CLRPNTPJZZ3001 | |
| Stainless upper hose. Suitable for use with M16 and PT1/8 temperature sensors. | DISCONTINUED |
![]() | Night Pager Stain Upper Water Bypass Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZZ3004 | |
| DISCONTINUED |
![]() | Night Pager Water Bypass Kit (Radiator Pipes and Hoses) -(GL)CLRPNTPJZZ3006 | |
| Stabilises coolant temperature by bypassing the coolant from the heater hose. This bypass function stabilises the rear cylinder temperature where heat easily accummulates, preventing heat soak and over heating. Billet aluminium A5056 adapters. Stainless mesh bypass hose. For installation, cutting of the standard upper hose and heater hose is required. | $ 146.83 |
![]() | TRUST GReddy Aluminium Radiator Pipe (Radiator Pipes and Hoses) -13911240 | |
| Highly durable aluminium radiator pipe that is designed to with water temperature sensor adapter. Pipe diameter and shape is designed to ensure sufficient coolant flow and flow speed. Standard hose swelling caused by heat is avoided enabling more eficient coolant flow. | DISCONTINUED |
![]() | OKUYAMA CARBING Radiator Cooling Plate (Radiator Shrouds (Hoods)) -421 010 0 | |
| Attached to the upper part of the radiator and the upper part of the front grill, the radiator cooling plate closes the gap between the main radiator body and the front grill. This increases the volume of air flowing through the radiator, increasing cooling efficiency. It also provides an aesthetically pleasing touch to the engine bay. | $ 124.22 |
![]() | TRUST GReddy Air Diversion Plate (Radiator Shrouds (Hoods)) -12014202 | |
| DISCONTINUED |
![]() | KOYO High Pressure Radiator Cap (Radiators) -SK-C13 | |
| Rust resistant stainless steel and chrome plated finish. Special synthetic rubber that is resistant to heat and corrosion. 1.3 kg/cm2 (127kPa). | $ 20.13 |
![]() | KOYO Type-R Radiator (Radiators) -(011)KA010453 | |
| Copper 3 row core (41 or 49mm wide depending on application). Brass tanks. Named Type-R for "Racing", this radiator type adopts KOYO's 3 row core with excellent thermal conductivity. Suitable for highly tuned engines. | $ 599.35 |
![]() | SARD Racing Radiator (Radiators) -29028 | |
| Super lightweight all aluminium 2 row radiator. Core sizes maximised, though maintaining full bolt on installation (with standard radiator shroud). Fins and tanks designed for maximum efficiency. | DISCONTINUED |
![]() | SARD Reserve Tank (Reserve Tanks) -29700 | |
| Aluminium radiator reserve (reservoir) tank. Internal baffle prevents deflection of coolant. Compact cylindrical design allows for installation in narrow spaces. | $ 91.97 |
![]() | Billion Super Thermo (Thermostats) -BST-S07 | |
| Low temp thermostat. Suppresses over heating and loss of power by maintaining optimum engine water temperature. This low temp thermostat that opens approx 10~20°C (Depending on application) earlier than the standard thermostat. | $ 47.09 |
![]() | SARD Cooling Thermo (Thermostats) -19403 | |
| Highly responsive to variations in coolant temperature allows for fine, linear control of the flow rate, preventing thermal droop, and reduces chances of overheating. | $ 42.36 |
![]() | TRD Sports Thermostat (Thermostats) -16340-SP020 | |
| DISCONTINUED |
![]() | HPI Transmission Oil Cooler (Transmission Oil Coolers) -HPMDOCE-W4 | |
| Universal transmission oil cooler kit. | $ 829.89 |
![]() | Kinokuni Transmission Oil Cooler Kit (Transmission Oil Coolers) -KMT-001R | |
| $ 501.59 |
![]() | Power Enterprise Cool Power Twin (Transmission Oil Coolers) -(GL)CLDCPREGEN01 | |
| Universal compact transmission oil/power steering fluid cooler. | $ 321.25 |
![]() | TRUST ATF Cooler Kit (Transmission Oil Coolers) -12014802 | |
| Cooler for cooling automatic transmission fluid (ATF). Prevents the increase of torque control slip of the automatic transmission (leading to power loss) when fluid gets hot in powered up cars or standard cars when driven hard. Lightweight and compact ATF kit using EARL'S autoflex hose / fitting. | DISCONTINUED |
![]() | TRUST Transmission/Differential Oil Cooler Kit (Transmission Oil Coolers) -12004811 | |
| Universal transmission or differential oil cooler kit. | $ 524.71 |
![]() | Advance Black Alternator (Alternators) -BA-JZ130-C | |
| High power, low resistance, better cooling. DENSO SC stator coil. Black body, red or blue aluminium pulley. | $ 345.06 |
![]() | Power Enterprise F1 Black Metal (Conrod) (Bearings) -1101-MT315 | |
| Set. | $ 185.06 |
![]() | Power Enterprise F1 Black Metal (Main #1) (Bearings) -1103-MT315 | |
| Set. | $ 244.91 |
![]() | Power Enterprise F1 Black Metal (Main) (Bearings) -1102-MT315 | |
| Set. | $ 244.91 |
![]() | TOMEI Competition Bearing (Conrod) More Info (Bearings) -127200 | |
| Upper and lower set. | $ 22.14 |
![]() | TOMEI Competition Bearing (Main) More Info (Bearings) -126200 | |
| Upper and lower set. | $ 40.28 |
![]() | Apex APEXi STB Heavy Duty Timing Belt (Belts and Chains) -818-T003 | |
| Sports tuning belt. | $ 80.00 |
![]() | HKS Fine Tune Timing Belt (Belts and Chains) -24999-AT003 | |
| Designed for use with HKS Slide Cam-Pullies (Sold separately), these belts are optimized for each engine type. Ideal for high power/high rpm applications. Designed to allow stable belt extension even when heat expansion occurs in the engine. Correctly shaped belt teeth reduces chances of slipping in high torque engines at lower belt tension, therefore not compromising belt strength. Teeth rubber are made from H-NBR grade rubber for additional strength. * Materials and/or molding method may vary sightly depending on application. | $ 89.45 |
![]() | Power Enterprise Super Kevlar II Timing Belt (Belts and Chains) -BT211 | |
| Stretch resistant - Maintains long-term performance. Significant improvements against belt tooth failure and cut resistance. Drives camshafts accurately. | $ 98.08 |
![]() | Power Enterprise Super Kevlar V Belt (Belts and Chains) -6PK1940-Blue | |
| Compared to standard belts, Power Enterprise Super Kevlar V Belts are: 4 times more heat resistant. 3 times more resistant to slip. 2 times less abrasive. | $ 56.19 |
![]() | TOMEI Nissan Adjustable Belt Tensioner (Alternator Relocation) (Belts and Chains) -AY460-NS013 + 13074-V5000 + 09340-0014P + 08911-2401A | |
| Nissan adjustable belt tensioner and fitting parts. Requires TOMEI High Strength Stud Bolt and TOMEI Tensioner Height Adjustment (Both sold separately). | $ 37.77 |
![]() | TOMEI Alternator Relocation Bracket (Belts and Chains) -195107 | |
| Brackets for relocation of the alternator, prevents fan belt from dropping out. Protects Cylinder Block Under extreme conditions such as competition use, the stock cylinder block easily gets cracked due to a stud bolt underneath the alternator by its own vibration. Relocating the alternator with this kit also prevents this problem. Keeps Alterator away from heat When running a big turbo on 1JZ/2JZ, the alternator is directly exposed to the heat coming from the exhaust. It's ideal to relocate the alternator to the intake side to prevent heat damage. For applications where air con compressor has been removed. Significantly increased durability to support the performance and withstand extreme conditions in highly tuned engine. Redesigned with higher class material and thicker structure. Designed to accommodate a tensioner pulley as necessary for the electric water pump setup popular competition vehicles (Not included). | $ 177.00 |
![]() | TOMEI Alternator Relocation Bracket (Old Version) (Belts and Chains) -195102 | |
| Brackets for relocation of the alternator, prevents fan belt from dropping out. Protects Cylinder Block Under extreme conditions such as competition use, the stock cylinder block easily gets cracked due to a stud bolt underneath the alternator by its own vibration. Relocating the alternator with this kit also prevents this problem. Keeps Alterator away from heat When running a big turbo on 1JZ/2JZ, the alternator is directly exposed to the heat coming from the exhaust. It's ideal to relocate the alternator to the intake side to prevent heat damage. For applications where air con compressor has been removed. | DISCONTINUED |
![]() | TOMEI Heavy Duty Timing Belt (Belts and Chains) -154001 | |
| Designed to ensure camshafts are driven at the right valve timing even under severe conditions. Although the timing belt is a common part of the engine, not all OEM and aftermarket timing belts are designed to be used on highly tuned turbo powered engines. The durability of the timing belt is greatly reduced with performance engines running at high RPM with aggressive camshafts, increased torque coming from the valve springs, extreme heat conditions from the larger turbos and more. | $ 74.45 |
![]() | TOMEI High Strength Stud Bolt (Belts and Chains) -191330 | |
| Required for installation of adjustable belt tensioner when using TOMEI Alternator Relocation Bracket. | $ 20.03 |
![]() | TOMEI Tensioner Height Adjustment (Belts and Chains) -34109010 | |
| Modification service of Nissan Adjustable Belt Tensioner (Sold separately) for use with Alternator Relocation Bracket. | $ 40.63 |
![]() | TRUST GReddy Heavy Duty Timing Belt (Belts and Chains) -13514501 | |
| Extreme Timing Belt. Engineered to increase heat-resistance, flexibility and durability, TRUST GReddy Extreme Timing Belts reduce the chances of cracking from heat, inconsistent timing from stretching and skipping or snapping. Improvements in materials and construction lead to a more reliable belt that will be more consistent and last longer. | $ 86.17 |
![]() | JUN Strengthened Valve Guide (Camshaft and Valvetrain Parts) -1008M-T004 | |
| Heavy duty racing valve guide set. | $ 231.80 |
![]() | NAPREC Forged Big Valves (Camshaft and Valvetrain Parts) -(GL)ENHPNP1JZ01 | |
| Set of oversized intake and exhaust forged valves. | $ 316.52 |
![]() | NAPREC Reinforced Race Valve Springs (Camshaft and Valvetrain Parts) -(GL)ENCV-NAP-1JZGTE-01 | |
| $ 222.35 |
![]() | TOMEI Valve Springs (Camshaft and Valvetrain Parts) -163061 | |
| $ 214.48 |
![]() | HKS Cam Pulley (Camshaft Pulleys and Sprockets) -22004-AT003 | |
| Review of the materials, shape, and surface treatment, HKS have delivered a lighter, stronger, and more precise evolved cam slide pulley. Using ultra lightweight duralumin (A2014) dramatically improved durability (strength: 50%, hardness: 30%) compared to conventional products. By using duralumin, changes to the design and shape of the pulleys has allowed for further weight reduction (approx 10% in the case of RB pulleys), reducing the burden on the valve train, improving engine response. Wear resistance has been improved by nickel plating the gear portion of the pulleys. Nickel plating of the gear portion of the pulleys improves the surface hardness (Hv hardness: 350->500), greatly improving wear resistance under severe conditions conditions such as using heavy duty timing belts, or when sand/grit gets between the teeth. | $ 89.45 |
![]() | HKS Cam Pulley (Old) (Camshaft Pulleys and Sprockets) -2204-RT002 | |
| DISCONTINUED |
![]() | JUN Cam Slide Sprocket (Camshaft Pulleys and Sprockets) -1006M-T007 | |
| Adjust the best valve timing when you change camshaft and/or do engine tuning. Able to correct off valve timing according to resurfacing cylinder head when overhaul. JUN Cam Slide Sprockets have marks for every 4 degrees of crank duration (Majority of applications). | $ 115.40 |
![]() | TOMEI Adjust Pulley (Camshaft Pulleys and Sprockets) -152016 | |
| Adjustable Cam Gear. | $ 122.64 |
![]() | TRUST GReddy Cam Sprocket (Camshaft Pulleys and Sprockets) -13513301 | |
| DISCONTINUED |
![]() | HKS Camshaft (Camshafts and Camshaft Kits) -22002-AT003 | |
| $ 328.81 |
![]() | HKS Valcon Plus VCAM Kit (Camshafts and Camshaft Kits) -2211-RT001 | |
| Control unit and adapters, intake and exhaust camshafts. | DISCONTINUED |
![]() | HKS Valcon Plus VCAM Kit Pro (Camshafts and Camshaft Kits) -2207-RT001 | |
| Camshaft(s), control unit and adapters. | $ 835.25 |
![]() | JUN Camshaft (Camshafts and Camshaft Kits) -1004M-T021 | |
| $ 306.76 |
![]() | TOMEI Forged H-Beam Conrod Kit (Connecting Rods and Parts) -1262003221 | |
| $ 816.35 |
![]() | TRUST GReddy Connecting Rod Bolt Set (Connecting Rods and Parts) -13900510 x 12 | |
| For use with TRUST H Cross section billet type connecting rods. | DISCONTINUED |
![]() | TRUST GReddy Connecting Rod Set (Connecting Rods and Parts) -13515400 | |
| DISCONTINUED |
![]() | Weld Heat Sink Cover 100 (Covers) -WHC026-Silver | |
| $ 110.61 |
![]() | Weld Heat Sink Cover 90 (Covers) -WD0084b (Old: WHC021-Silver) | |
| $ 110.61 |
![]() | Do Luck Transmission Collar (Engine Mounts) -SPF2475K | |
| DISCONTINUED |
![]() | Kazama SPL Engine Mount (Engine Mounts) -(GL)ENEMJZZ3001 | |
$ 158.80 |
![]() | HKS Set Up Kit (Exhaust Manifolds (Turbo)) -1420-RT001 | |
| Exhaust manifold and wastegate kit. | DISCONTINUED |
![]() | HKS Stainless Steel Exhaust Manifold (Exhaust Manifolds (Turbo)) -1419-RT007 | |
| Pulls out potential power from turbocharged engine. The best solution to reduce primary exhaust gas pressure and supply smooth exhaust gas. Shape, diameter of pipes and production quality of exhaust manifold between engine and turbine affect performance of turbine. HKS Exhaust Manifolds were developed with know-how and data from long time development experience of turbo technologies. Diameter and bending of pipes is designed for each engine. Welds between flanges and pipes are flattened to reduce friction of exhaust gas. As a result, response of the turbocharger at middle and high rpm range is improved. Both torque and horsepower are also increased. | DISCONTINUED |
![]() | HPI Stainless Exhaust Manifold (Exhaust Manifolds (Turbo)) -HPEX-1JZGTB42 | |
| SUS304. | $ 685.33 |
![]() | Rasty VR High Power Exhaust Manifold (Exhaust Manifolds (Turbo)) -(GL)ENEMRASJZZ3003 | |
| $ 1323.42 |
![]() | TOMEI Exhaust Manifold (Exhaust Manifolds (Turbo)) -412001 | |
| $ 680.29 |
![]() | TOMEI EXPreme Exhaust Manifold (Exhaust Manifolds (Turbo)) -412001-Old | |
| DISCONTINUED |
![]() | TRUST GReddy Sus. Turbo Ex. Manifold (Exhaust Manifolds (Turbo)) -10511033 | |
| Stainless steel turbo exhaust manifold. Design layout with runners as close equal length within the space constraints of the of the engine bay, optimising turbo efficiency. Main pipe diameter and the waist gate line diameter are designed to efficiently spool the turbo. | $ 1231.45 |
![]() | Blitz Fuel Pump (Fuel Pumps) -31255 | |
| DISCONTINUED |
![]() | Power Enterprise Fuel Pump (Fuel Pumps) -(GL)0244130LH | |
| DISCONTINUED |
![]() | SARD BOSCH 005 Fuel Pump (Fuel Pumps) -58248 | |
| DISCONTINUED |
![]() | SARD BOSCH 044 Fuel Pump (Fuel Pumps) -58251 | |
| DISCONTINUED |
![]() | SARD BOSCH 979 Fuel Pump (Fuel Pumps) -58250 | |
| DISCONTINUED |
![]() | SARD Fuel Filter (Fuel Pumps) -58254 | |
| $ 4.03 |
![]() | SARD Fuel Pump (In Tank) (Fuel Pumps) -58222 | |
| $ 194.32 |
![]() | SARD Pump Harness Kit (Fuel Pumps) -58253 | |
| Universal. For use with SARD Fuel Pumps. Kit contents: Wiring, relay terminal, electronic adapter and other connectors. | $ 55.12 |
![]() | TOMEI Universal Over Size Fuel Pump (Fuel Pumps) -183018 | |
| When upgrading your engine to get more power, just by upgrading the turbo and camshafts alone are not enough. More fuel is required to match the increased air flow. TOMEI fuel pumps are often adequate to suit most engines for the desired power increase that most end users are after. TOMEI pumps are quiet, and doesn't require much electrical power. An effective budget performance in-tank (internal) fuel pump. | $ 225.82 |
![]() | SARD Fuel Delivery Pipe (Fuel Rails) -63541 | |
| Fuel rail. Gold. | $ 167.55 |
![]() | HKS Adjustable Fuel Regulator (Fuel Regulators) -1407-RA015 | |
| Universal adjustable fuel regulator. Includes mounting bracket. AN#6. | $ 90.58 |
![]() | SARD Fuel Regulator Setting Meter (Fuel Regulators) -64008 | |
| 52mm gauge (0~800kPa). Kit includes, fuel hose (1m), 4 x hose band, 2 x 8mm-PT1/8 Hose nipple, 8mm nipple-PT1/8 (female)-8mm nipple (3 way),and PT1/8 plug bolt. | DISCONTINUED |
![]() | SARD Fuel Regulator Standard (Fuel Regulators) -69010 | |
| Universal adjustable fuel regulator. 50mm diameter x 96mm. For use with applications ~600PS. | $ 81.89 |
![]() | SARD Type RJ Fuel Regulator (Fuel Regulators) -69030 | |
| Universal adjustable fuel regulator. 66mm diameter x 92mm. For use with applications 600PS~ . | $ 156.85 |
![]() | TOMEI Fuel Pressure Gauge (Fuel Regulators) -185112 | |
| Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | $ 40.44 |
![]() | TOMEI Fuel Pressure Gauge (Old Version) (Fuel Regulators) -185111 | |
| 0 kg/cm2~7 kg/cm2 (0 PSI~100 PSI). Simple and easy to use, precisely displays the fuel pressure which aids you to precisely adjust the fuel pressure. This gauge can be used in the fuel lines or in conjunction with the TOMEI Fuel Pressure Regulators (Sold separately). | DISCONTINUED |
![]() | TOMEI Fuel Regulator Type L More Info (Fuel Regulators) -185002 | |
| 50mm diaphragm. For high flow/high pressure/high boost applications. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 118.11 |
![]() | TOMEI Fuel Regulator Type S More Info (Fuel Regulators) -185001 | |
| 33mm diaphragm. Includes fittings (AN6 1/8NPTx2, #8 Straight and 1/8NPTx2). Hard anodized finish adds more protection to the regulator since it will spend it's time in a harsh environment. This finish helps protect the thick membrane from harmful grit/grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety. | $ 92.60 |
![]() | SARD Fuel Collector Tank (Fuel Swirl Pots and Collector Tanks) -58263 | |
| $ 283.46 |
![]() | SARD Mount Stay (Fuel Swirl Pots and Collector Tanks) -74306 | |
| Mount bracket. | $ 32.88 |
![]() | HKS Head Gasket More Info (Gaskets) -2301-RT0036 | |
| Head gasket that ensures that contact surface pressure is spread as evenly as possible, adapts quickly to the ever changing gaps that can appear in the contact surface in order to maintain a good seal, with good pressure. | $ 165.98 |
![]() | TOMEI Head Gasket (Gaskets) -1372875121 | |
| $ 180.94 |
![]() | TRUST GReddy Metal Head Gasket (Gaskets) -13511313 | |
| DISCONTINUED |
![]() | TRUST GReddy Titanium Turbo Blanket (Heat Shields and Heat Wrap (Bandages)) -11900537 | |
| High wear resistant turbo exhaust housing cover. Contact surface heat resistantance: ~1000°C. Radiated heat resistantance: ~1350°C. Colour: Titanium gold + aluminium GReddy emblem. | $ 112.94 |
![]() | Buddy Club Racing Spec Condenser (Ignition System Parts) -(GL)ENISBCGEN01 | |
| Voltage stabiliser and earthing system. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser II (Ignition System Parts) -(GL)ENISBCGEN02 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | Buddy Club Racing Spec Condenser III (Ignition System Parts) -(GL)ENISBCGEN03 | |
| Voltage stabiliser and earthing system. Increase Engine Performance (HP/Torque). High Rev RPM. More Stable Low Speed & Idle, Better Accelerate Response. Increase Fuel Economy. Reduce Environmental Pollution. Reduce Battery Load (Increase Battery Life). Increase Output Power For Aftermarket Sound Systems. | DISCONTINUED |
![]() | HKS Circle Earth System (Ignition System Parts) -48004-AK001 | |
| "CIRCLE MAGIC" is HKS' answer for an earthing system that allows for fully customisable wire layout. By changing the earth cable, energy efficiency is restored, bringing out the full capability of electric components. | $ 91.59 |
![]() | HKS Super Fire Racing Coil Pro (Ignition System Parts) -43005-AT002 | |
| Compared to standard coils, secondary voltage is increased providing a strong and reliable spark and preventing misfire at high RPM. | $ 1009.10 |
![]() | HKS Twin Power Harness (Ignition System Parts) -4399-ST001 | |
| Car specific harness. | DISCONTINUED |
![]() | HKS Twin Power TYPE-DLI (Ignition System Parts) -43001-AK001 | |
| Twin Power high performance ignition system. High powered tuned engines can cause ingnition system issues. The Twin Power can solve all these problems and maximiz potential engine power. Full transistor type: Long duration of discharge to obtain stable combustion at a low RPM. CDI System: Fast initial rise of current discharge so it has strong ignition energy which is good for high RPM. | DISCONTINUED |
![]() | Kazama Spark EXE Coil (Ignition System Parts) -0180T009 | |
| Approx 10% higher spark capacity than standard ignition coils. high output coil with a spark voltage of 30000V. Direct replacement for standard ignition coils. | $ 192.18 |
![]() | mature HIGHSPARK Ignition Coil (Ignition System Parts) -(GL)ENIP-MAU-TOY-02 | |
| Specially tuned ignition coils with modified coil design that raises the secondary voltage output. By outputting a high and stable secondary voltage, engine quietness, increased torque and response idle/low rpm, and high output during acceleration. | $ 289.63 |
![]() | OKADA Projects Plasma Booster (Ignition System Parts) -SB203100B | |
| High power amplifier which drastically boosts ignition coil current. With an increase in spark current, the ignition process is faster and it also creates a faster burn, thus leading to more horsepower and torque. Complete ignition decreases the incidence of "hot spots" in the combustion chamber and lowers the risk of detonation. Simple installation, only 2 wires on distributor type ignition. 100% secondary current (Spark Amperage) increase. 4 Times Spark Energy Increase for the initial spark discharge. Compatible with OBD-II (On-Board-Diagnostics). | $ 226.95 |
![]() | PIVOT Mega RAIZIN (Ignition System Parts) -VS-M | |
| DISCONTINUED |
![]() | PIVOT RAIZIN SPARK Type S (Ignition System Parts) -VS-S | |
| DISCONTINUED |
![]() | PIVOT RAIZIN Volt Stabilizer (Ignition System Parts) -VS-1 | |
| DISCONTINUED |
![]() | PIVOT SPARK EARTH (Ignition System Parts) -SES | |
| DISCONTINUED |
![]() | SARD Magic Box (Ignition System Parts) -62311 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | SARD Sweeper (Ignition System Parts) -62310 | |
| Voltage stabiliser. | DISCONTINUED |
![]() | TRUST GReddy Ground Wiring Kit (Ignition System Parts) -18501001 | |
| DISCONTINUED |
![]() | Power Enterprise 550cc Injector (Injectors) -SH550A | |
| DISCONTINUED |
![]() | Power Enterprise 650cc Injector (Injectors) -SH650A | |
| DISCONTINUED |
![]() | Power Enterprise 800cc Injector (Injectors) -SH800A | |
| DISCONTINUED |
![]() | SARD 530cc Injector (Injectors) -63516 | |
| DISCONTINUED |
![]() | SARD 540cc Injector (Injectors) -63560 | |
| DISCONTINUED |
![]() | SARD 650cc Injector (Injectors) -63561 | |
| DISCONTINUED |
![]() | SARD 800cc Injector (Injectors) -63564 | |
| DISCONTINUED |
![]() | SARD 850cc Injector (Injectors) -63507 | |
| DISCONTINUED |
![]() | SARD Injector Collar (Injectors) -63525 x 6 | |
| Part required for attachment of injectors to standard fuel delivery pipe. | DISCONTINUED |
![]() | SARD Injector Kit (Injectors) -63812 | |
| Kit including injectors and all parts required for bolt installation to standard fuel delivery pipe. | DISCONTINUED |
![]() | SARD Oil Catch Tank (Oil Breather Tanks) -29241 | |
| Oil catch (breather) tank kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank 1000 (Oil Breather Tanks) -13500601 (Old: 13500509) | |
| Universal kit. 1000ml. | $ 92.60 |
![]() | TRUST GReddy Oil Catch Tank 500 (Oil Breather Tanks) -13500506 | |
| Universal kit. | DISCONTINUED |
![]() | TRUST GReddy Oil Catch Tank Hose (Oil Breather Tanks) -12400459 | |
| Hose for use with TRUST GReddy Breather Tanks. | $ 10.90 |
![]() | TRUST GReddy Oil Catch Tank Short (Oil Breather Tanks) -13500611 | |
| Universal kit. 680ml. | $ 87.24 |
![]() | Apex APEXi U.F.O Oil Filter (Oil Filters) -569-A385 | |
| Ultra Flow Oil Filter. | DISCONTINUED |
![]() | HKS Oil Filter (Oil Filters) -52009-AK013 (Old: 52009-AK007) | |
| New concept oil filter improves oil pressure drop and flow properties. The oil pressure drop and flow properties are improved by approximately 30% compared to current sports oil filters. The stress on the engine is reduced for better engine response. Utilizing the filter original designed for HKS Oil Filter and increasing its filter surface area by 15%, compared with a conventional product, greatly improved particle collection performance. HKS Oil Filter's minimum particle size is 20μ compared with 25μ of JIS standard which corresponds to the filtration performance requirement of most engines. Filter replacement is recommended every 10,000 km or 6 months under the normal driving environment. For sports and/or race use, it is recommend to replace filters every 3,000 km ~ 5,000km. | $ 17.89 |
![]() | Power Enterprise Mag Power II Oil Filter (Oil Filters) -OF2-05A (OFII-05A) | |
| The pioneer of oil filters with built-in magnets designed to help protect the engine. Particle capture efficiency of >10 microns: 90% (6 times standard oil filters). Special large magnet installed in the middle of the flow path adsorbs fine iron particles. Special material filter is used to ensure sufficient surface area. Mesh structure for the filter holding material, allows smooth oil flow and a pressure loss of approx half that of the standard oil filters, reducing engine load and improving performance. Replacement recommended at 10,000km or every 6 months. For continuous high-load applications on a circuit/track, replacement at 5,000km or every 3 months is recommended. | DISCONTINUED |
![]() | TRD Sports Oil Filter (Oil Filters) -90915-SP020 | |
| Sports oil filter that always keeps the engine clean even under harsh conditions in the high rotation range. Achieves high filtration efficiency while reducing pressure loss. High engine protection performance with smooth engine oil circulation and excellent impurity capture performance. Features a backup net similar to that used in racing cars prevents deformation and damage of the filter paper, ensuring high durability even under harsh conditions. | $ 28.25 |
![]() | CUSCO Neodymium Magnet Drain Bolt (Oil Other) -00B 001 ND01 | |
| 4500 gauss neodymium (Nd-Fe-B) magnet for capture of metal particles in engine oil not filtered by oil filter. Aluminium alloy bolt (Blue alumite finish). Includes aluminium gasket. | $ 20.47 |
![]() | Night Pager Oil Level Gauge Support (Oil Other) -(GL)ENOO-NTP-1JZ-01 | |
| Stops oil level gauge (dip stick) moving in holder during sports driving. It is easy to install and you can use it as a dress up in the engine room. | $ 37.16 |
![]() | SARD Drain Plug MAG II (Oil Other) -19345 SMD-01 | |
| Features 5000 gauss magnet for capture of metal particles in engine oil not filtered by oil filter. Includes sealing washer. Duralumin A2017. | $ 15.43 |
![]() | SARD Dren Plug MAG+ (Oil Other) -19338 SDM-04 | |
| Magnetic. Includes sealing washer. | $ 14.05 |
![]() | TRUST GReddy Neodymium Mag Drain Bolt (Oil Other) -13901301 | |
| Magnetic oil drain plug that attracts fine particles in the engine oil protecting the engine from internal damage. Strong 5000 gauss neodymium magnet. Aluminum with hard anodized aluminum. | $ 18.52 |
![]() | TRUST GReddy Neodymium Mag Drain Bolt Seal Washer (Oil Other) -13901401 | |
| Replacement seal washer for use with TRUST GReddy Neodymium Mag Drain Bolt. | $ 6.16 |
![]() | TOMEI Oil Pan Baffle Plate More Info (Oil Pans (Sumps) and Baffle Plates) -194009 | |
| Protects the engine under the strong G-force on track! During hard acceleration, deceleration and cornering, the sudden change in inertial forces will cause the oil to jump and move around too much. When this happens, the oil can move away from the oil pickup, which then in turn cuts oil supply to the engine. The TOMEI baffle plate is designed to prevent this problem from happening especially when the car is used for competition use. | $ 152.12 |
![]() | Top Secret FUSION R20 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 0W-20 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R30 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 5W-30 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R40 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 10W-40 SL/CF. 4 litres. | $ 67.40 |
![]() | Top Secret FUSION R50 (Oils (Engine) and Lubrication) -(GL)ENEO-TOP-01 | |
| 15W-50 SL/CF. 4 litres. | $ 67.40 |
![]() | Billion Racing PS Tank (Other) -BRPS-090 | |
| Power steering fluid tank. | DISCONTINUED |
![]() | TOMEI Forged Piston Kit (Piston Kits and Parts) -1161865212 | |
| Kit includes pistons, piston rings, pins and circlips. | $ 1009.10 |
![]() | TRUST GReddy Forged Piston Set (Piston Kits and Parts) -13515800 | |
| DISCONTINUED |
![]() | TRUST GReddy Forged Piston Set by OS Giken (Piston Kits and Parts) -13516605 | |
| Highly durable piston with low power loss. High sealing performance - that does not release combustion power. Low friction - that allows smooth vertical movement. High thermal efficiency - that releases heat from the piston. These elements are embodied in a different approach than before, and we have created a high durability piston with little power loss. | $ 895.72 |
![]() | TRUST GReddy Aluminium Pulley Kit (Pulleys) -13512102 | |
| $ 187.58 |
![]() | URAS No Pororin (Belt Stopper) (Pulleys) -(GL)ENPU-URA-1JZ-001 | |
| Prevents belt slipping off pulley. | $ 31.65 |
![]() | TOMEI ARP Head Stud Kit (Reinforced Bolts) -203-4205 | |
| $ 178.67 |
![]() | TOMEI ARP Undercut Head Stud Kit (Reinforced Bolts) -203-4702 | |
| $ 196.02 |
![]() | TOMEI Turbine Kit (1JZGTE) (Turbocharger Kits) -173025 | |
| DISCONTINUED |
![]() | TRD Exchange Turbine Kit (Turbocharger Kits) -17200-JX000 | |
| DISCONTINUED |
![]() | TRUST GReddy Turbo Kit (Wastegate Type) (Turbocharger Kits) -11510041 | |
| Full external wategate type turbocharger kit. High grade product for customer who wants ideal engine tuning. Using a special stainless steel exhaust manifold and intake piping to suit the redesigned layout. Piping modifications are not necessary (some models may require slight adjustments). This kit is intended for full-fledged engine tuning for use in conjunction computer tuning, high-performance intercooler, and other supporting engine parts (Not included). | $ 2623.53 |
![]() | TOMEI EXPREME Full Cast Turbo Outlet Pipe (Turbocharger Outlets and Parts) -424002 | |
| $ 362.82 |
![]() | TOMEI EXPREME Turbine Outlet Pipe (Turbocharger Outlets and Parts) -424001 | |
| DISCONTINUED |
![]() | HKS GT3037ProS (Turbochargers) -14001-AK005 | |
| DISCONTINUED |
![]() | APP Direct Clutch Line System (Clutch Hoses) -GTC030 | |
| $ 46.23 |
![]() | OS Giken GT1CD Overhaul Kit (Clutch Overhaul Kits) -(GL)GT1CD-OHB | |
$ 549.27 |
![]() | OS Giken GT2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)GT2CD-OHB | |
$ 557.46 |
![]() | OS Giken GTS2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)GTS2CD-OHB | |
$ 557.46 |
![]() | OS Giken R3C Overhaul Kit (Clutch Overhaul Kits) -(GL)R3C-OHA | |
$ 543.29 |
![]() | OS Giken R4C Overhaul Kit (Clutch Overhaul Kits) -(GL)R4C-OHA | |
$ 803.12 |
![]() | OS Giken STR2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)STR2CD-OHA | |
$ 401.56 |
![]() | OS Giken Super Single (Aluminium Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SSA-OHA | |
| $ 238.73 |
![]() | OS Giken Super Single (Press Type) Overhaul Kit (Clutch Overhaul Kits) -(GL)SS-OHA | |
| $ 238.73 |
![]() | OS Giken TR2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)TR2CD-OHA | |
$ 401.56 |
![]() | OS Giken TS2B Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2B-OHA | |
$ 344.87 |
![]() | OS Giken TS2BD Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2BD-OHA | |
$ 368.49 |
![]() | OS Giken TS2CD Overhaul Kit (Clutch Overhaul Kits) -(GL)TS2CD-OHA | |
$ 354.32 |
![]() | OS Giken TS3B Overhaul Kit (Clutch Overhaul Kits) -(GL)TS3B-OHA | |
$ 458.25 |
![]() | OS Giken TS3BW Overhaul Kit (Clutch Overhaul Kits) -(GL)TS3BW-OHA | |
$ 458.25 |
![]() | EXEDY Hyper CARBON-D (Twin) (Clutches) -TM032HDMC1 | |
| Damper type discs. Silent type hub. Carbon clutches offer excellent operational feel by reducing inertia. Unique damper design significantly reduces shock torque and gearbox rattle. The highest possible performance with the same ease of use as the original equipment clutch. SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 20 to 30% reduction in inertia vs OEM. Suitable for: Street Modified / Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper CARBON-R (Triple) (Clutches) -TM033SBMC1 | |
| Damperless (centre hub) type discs. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper CARBON-R (Twin) (Clutches) -TM032SBMC1 | |
| Damperless (centre hub) type discs. Rigid type center hub design gives the Carbon-R the ultimate shift response. Light weight flywheel and hub design significantly reduces inertia, giving excellent acceleration response. Added SX coating to the Pressure plate and Intermediate plate further increases stability and torque capacity. 40 to 50% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper COMPE-D (Twin) (Clutches) -TM032SDL | |
| Lightweight model. Damper type discs. The Compe-D damper absorbs shock torque, protecting the drive system. The combination of a lightweight forged aluminium clutch cover and ultra-light drilled chromium-molybdenum flywheel allows the Compe-D to achieve the lowest possible weight. The centre plate with grooves provides improved disc release for better disengagement at any rpm. The 6-PAD disc design ensures low weight and low inertia, contributing to faster shift response. 20 to 30% reduction in inertia vs OEM. Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper MULTI (Twin) (Clutches) -TM032SD | |
| Self-levelling intermediate plate design reduces gearbox rattle and increases the disengagement performance (PAT.). Unique intermediate plate design increases heat resistance which improves clutch life. 20 to 30% reduction in inertia vs OEM. Suitable for: Street Modified / Track day / Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 1096.53 |
![]() | EXEDY Hyper SINGLE (Clutches) -TH04SD1 | |
| Damper type metal disc. Includes flywheel. Durability is improved with the use of a stronger, smaller damper disc, specifically redesigned for the Hyper Single. A lower level of inertia is achieved over the genuine fitment clutch which improves shift response for faster gear changes. 20 to 30% reduction in inertia vs OEM. Suitable for: Track day / Circuit Racing / Time Attack / Drift / Drag. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | DISCONTINUED |
![]() | EXEDY Hyper SINGLE VF (Clutches) -TH04SDV | |
| Various Friction. Metal and Organic (Ultra Fiber) damper type disc. Includes flywheel. Capable of handling a high torque capacity without sacrificing the feel of a standard clutch. Combination of cerametallic & organic friction facings allows for high heat durability. Unique cushioning plate design reduces pedal effort by 12% vs Hyper Single. 20 to 30% reduction in inertia vs OEM. 225mm disc models rated to 500Nm (approx 370 ft lbf). 200mm disc models rated to 300Nm (approx 220 ft lbf). Suitable for: Street Modified / Track day. All Hyper Series clutches come with a chromoly steel flywheel and forged aluminium clutch cover, which has no clamp load deflection as found in a pressed metal cover. | $ 775.28 |
![]() | HKS GD Clutch Max (Clutches) -26004-ST003 | |
| DISCONTINUED |
![]() | HKS GD Clutch Pro (Clutches) -2604-RT006 | |
| DISCONTINUED |
![]() | HKS LA Clutch Twin More Info (Clutches) -26011-AT001 | |
| The tuning expert HKS provides the clutch system for streets and sports use. Capable torque, pedal effort, and semi-engagement range are closely examined for various driving situations. Despite supporting approximately 700ps, the main concept for the Twin Plate LA Clutch remains the same. Using "MG Composite Discs" to reduce judder and achieve better driving feel compare to stock clutch. Disc dampers are used to reduce gear noise and protect the transmission from shock torque. The LA Twin also has a "Pivot Ring" within the pressure plate to offer partial engagement like no other twin plate clutch. Twin plate clutch. | $ 1235.86 |
![]() | ORC Metal Series ORC-1000F (Clutches) -ORC-P1000F-TT0202 | |
| Triple Plate Clutch. Highly durable metal construction for all conditions. Designed for high power, high stress drag and circuit racing applications. ~980N/m (100kgf/m). | $ 1159.02 |
![]() | ORC Metal Series ORC-1000F-SE (Clutches) -ORC-1000F-TT0202-SE | |
| $ 1269.88 |
![]() | ORC Light Series ORC-400-Light (Clutches) -ORC-P400L-HP-TT0202 (Old: P400L-HP-TT0202) | |
| The fun of a manual transmission car is not only higher output and drifting, there is also the pleasure of comfortable operation by the driver. However, until now, the enjoyment of the reinforced clutch was a little different due to being difficult to use. This single plate clutch unit has the same operation feeling as the standard clutch. ORC's Light Clutch series is are clutches that allows the engine to run lightly, maintaining the fun of changing gears while providing good feel in semi engaged conditions. | $ 730.68 |
![]() | ORC Metal Series ORC-409 (Clutches) -ORC-P409D-TT0202 | |
| Single Plate Clutch. ~420N/m(43kgf/m). | $ 730.68 |
![]() | ORC Carbon Series ORC-409-CC (Clutches) -ORC-409CC-02T | |
| Single Plate Carbon Clutch. ~420N/m(43kgf/m). | DISCONTINUED |
![]() | ORC SE Clutch ORC-409-SE (Clutches) -ORC-409D-TT0202-SE | |
| Single Plate Clutch. "Cushioned" pressure plate increases partial engagement range allowing smooth operation not found in other heavy duty clutches. This increased range also reduces the impact torque at the time of clutch engagement upon changing gears. Impact forces of 40% less (ORC testing) helps protects transmission, differential and driveshafts. (Impact torque 40% down: Our comparison) transmissions and differential gear, To reduce the impact applied to the drive shaft, to protect the drive system. | $ 910.21 |
![]() | ORC Metal Series ORC-559 (Clutches) -ORC-P559-TT0202 | |
| Twin Plate Clutch. ~630N/m(65kgf/m). | $ 967.53 |
![]() | ORC Carbon Series ORC-559-CC (Clutches) -ORC-P559CC-TT0202 | |
| Twin Plate Carbon Clutch. ~630N/m(65kgf/m). | $ 1820.41 |
![]() | ORC SE Clutch ORC-559-SE (Clutches) -ORC-559D-TT0202-SE | |
| Twin Plate Clutch. "Cushioned" pressure plate increases partial engagement range allowing smooth operation not found in other heavy duty clutches. This increased range also reduces the impact torque at the time of clutch engagement upon changing gears. Impact forces of 40% less (ORC testing) helps protects transmission, differential and driveshafts. (Impact torque 40% down: Our comparison) transmissions and differential gear, To reduce the impact applied to the drive shaft, to protect the drive system. | $ 1188.62 |
![]() | ORC Metal Series ORC-659 (Clutches) -ORC-P659-TT0202 | |
| Twin Plate Clutch. ~735N/m(75kgf/m). | $ 992.72 |
![]() | ORC Metal Series ORC-709 (Clutches) -ORC-709-02T | |
| Twin Plate Clutch. ~780N/m(80kgf/m). | DISCONTINUED |
![]() | OS Giken Fitting Kit (Clutches) -(GL)DTCLOSG-JZZ30-TS2B-FITKIT | |
| Movement alteration kit. Pull to push conversion kit. For fitting of OS Giken multi plate clutches (Where not included). Push rod, release hook, release sleeve, release bearing and other miscellaneous parts required for fitting. | $ 188.97 |
![]() | OS Giken Grand Touring (Street Master) GT1CD (Mono Metal Hard) (Clutches) -(GL)DTCLOSG-JZZ30-GT1CD | |
| Street Master Hard cover. This is a clutch model designed for those who don't really drive aggressively, yet make a ton of power. A lot of "show car builds with a lot of power" like this clutch as it is designed to be easier to slip and drive everyday. The caveat being increased wear when used in an aggressive manner like track, drift, or autocross. For dual purpose applications, the STR series is highly recommend. Single plate. Damper type 215mm disc. ~430PS. | $ 947.37 |
![]() | OS Giken Grand Touring (Street Master) GT2CD (Twin Metal Hard) (Clutches) -(GL)DTCLOSG-JZZ30-GT2CD | |
| Street Master Hard cover. This is a clutch model designed for those who don't really drive aggressively, yet make a ton of power. A lot of "show car builds with a lot of power" like this clutch as it is designed to be easier to slip and drive everyday. The caveat being increased wear when used in an aggressive manner like track, drift, or autocross. For dual purpose applications, the STR series is highly recommend. Twin plate. Damper type 215mm discs. ~700PS. | $ 1138.86 |
![]() | OS Giken Grand Touring (Street Master) GTS2CD (Twin Metal Soft) (Clutches) -(GL)DTCLOSG-JZZ30-GTS2CD | |
| Street Master Soft cover. This is a clutch model designed for those who don't really drive aggressively, yet make a ton of power. A lot of "show car builds with a lot of power" like this clutch as it is designed to be easier to slip and drive everyday. The caveat being increased wear when used in an aggressive manner like track, drift, or autocross. For dual purpose applications, the STR series is highly recommend. Twin plate. Damper type 215mm discs. ~500PS. | $ 1138.86 |
![]() | OS Giken Option Flywheel Bolt Set (Clutches) -(GL)DTCLOSG-JZZ30-FWB | |
| For fitting of OS Giken multi plate clutches (Where not included). | $ 32.00 |
![]() | OS Giken R3C More Info (Clutches) -(GL)DTCLOSG-JZZ30-R3C | |
| R series clutch kits are power holding monsters. Often found in professional level drift applications as they handle all the heat and abuse that drift has to offer. Also used in serious drag race applications for its relative ease of use and slip. The center hub is separate from the clutch discs to provide more reliability and integrity to the clutch system. By focusing all the energy through the floating hub, reliability is increased while and clutch hub failures often found in other brands are decreased (at the same amount of torque). Centre hub, aluminium cover. Triple (3) plate. 215mm discs. 10,700N/m (1,100kgf/m). For applications with less than 1100 lb/ft (1491 N/m, 152 kg/m) of torque. | $ 1058.23 |
![]() | OS Giken R4C More Info (Clutches) -(GL)DTCLOSG-JZZ30-R4C | |
| R series clutch kits are power holding monsters. Often found in professional level drift applications as they handle all the heat and abuse that drift has to offer. Also used in serious drag race applications for its relative ease of use and slip. The center hub is separate from the clutch discs to provide more reliability and integrity to the clutch system. By focusing all the energy through the floating hub, reliability is increased while and clutch hub failures often found in other brands are decreased (at the same amount of torque). Centre hub, aluminium cover. Quadruple (4) plate. 215mm discs. 10,700N/m (1,100kgf/m). For applications with less than 1400 lb/ft (1898 N/m, 193 kg/m) of torque. | $ 1162.17 |
![]() | OS Giken STR2CD More Info (Clutches) -(GL)DTCLOSG-JZZ30-STR2CD | |
| STR series clutch is a dual purpose type clutch that a lot of customers love. This clutch is ideal for applications that see occasional track day or autocross use. Really soft in pedal pressure for ease of drive-ability. Not designed for drift use (TS series recommended). Aluminium cover. Twin plate push type. Damper type 215mm discs. | $ 1034.61 |
![]() | OS Giken Super Single (Clutches) -(GL)DTCLOSG-JZZ30-SSP | |
| The Super Single clutch kit was designed to provide power holding performance for your simple bolt on equipped vehicle. This kit should also be able to handle the heat capacity requirements of track and aggressive use. For a balance of performance and longevity, this clutch is ideal for applications with less than 400 lb/ft (540 N/m, 55 kg/m) of torque. | $ 655.10 |
![]() | OS Giken Racing Carbon TR2B-C (Clutches) -(GL)DTCLOSG-JZZ30-TR2B-C | |
| Carbon twin plate clutch. Aluminium cover. Twin plate push type. 204mm carbon discs. By using two relatively small diameter, lightweight "RACING CARBON" discs (204mm), the TR2B-C clutch's ability is dramatically improved at above 250°C, while maintaining high response. Clutch capacity is comparable to a metal triple plate clutch when above 250°C. | DISCONTINUED |
![]() | OS Giken TR2CD More Info (Clutches) -(GL)DTCLOSG-JZZ30-TR2CD | |
| TR Series clutch lineup is designed for track or drift dedicated applications. This clutch can handle a lot of abuse while providing a fairly standard pedal pressure. Aluminium cover. Twin plate push type. Damper type 215mm discs. 10,700N/m (1,100kgf/m). For applications with less than 750 lb/ft (1016 N/m, 103 kg/m) of torque. | $ 873.99 |
![]() | OS Giken Racing Carbon TRSD-C (Clutches) -(GL)DTCLOSG-JZZ30-TRSD-C | |
| Single plate carbon clutch that extracts ultimate performance. Aluminium cover. Single plate push type. 225mm carbon disc. | DISCONTINUED |
![]() | OS Giken TS2B More Info (Clutches) -(GL)DTCLOSG-JZZ30-TS2B | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. 204mm discs. 9,800N/m (1,000kgf/m). For applications with less than 550 lb/ft (745 N/m, 76 kg/m) of torque. | $ 760.60 |
![]() | OS Giken TS2BD More Info (Clutches) -(GL)DTCLOSG-JZZ30-TS2BD | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. Damper type 204mm discs. 9,800N/m (1,000kgf/m). For applications with less than 550 lb/ft (745 N/m, 76 kg/m) of torque. | $ 793.67 |
![]() | OS Giken TS2CD More Info (Clutches) -(GL)DTCLOSG-JZZ30-TS2CD | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Twin plate push type. Damper type 215mm discs. 9,800N/m (1,000kgf/m). For applications with less than 750 lb/ft (1016 N/m, 103 kg/m) of torque. | $ 845.64 |
![]() | OS Giken TS3B More Info (Clutches) -(GL)DTCLOSG-JZZ30-TS3B | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Triple plate push type. 204mm discs. 9,800N/m (1,000kgf/m). | $ 840.92 |
![]() | OS Giken TS3BW More Info (Clutches) -(GL)DTCLOSG-JZZ30-TS3BW | |
| TS series clutch is a great entry level start for moderate increase in power. With pedal pressure being close to standard, this clutch has very high drive-ability. Steel press (Stamped) cover. Triple plate push type. 204mm discs. Lightweight flywheel. 9,800N/m (1,000kgf/m). | $ 850.36 |
![]() | TRD Twin Plate Clutch (Clutches) -31000-JX000 | |
| DISCONTINUED |
![]() | Yanagida Machine Works (YANACK) Diff Mount Rigid Collar (Differential Bushes and Collars) -YK-063-06 | |
| $ 177.00 |
![]() | CUSCO Hybrid Differential More Info (Differentials) -HBD 167 A | |
| Super low initial torque. 1 way. Designed for automatic transmission models. | $ 655.10 |
![]() | CUSCO LSD Type MZ More Info (Differentials) -LSD 167 E | |
| LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
![]() | CUSCO LSD Type MZ Spec F More Info (Differentials) -LSD 167 ET | |
| Flat Friction Disc Type (For smoother/milder actuation). LSD where initial torque initiated by cone plates. Higher durability in high power applications. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
![]() | CUSCO LSD Type RS More Info (Differentials) -LSD 167 F | |
| RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
![]() | CUSCO LSD Type RS Spec F More Info (Differentials) -LSD 167 FT | |
| Flat Friction Disc Type (For smoother/milder actuation). RS spring equipped, low initial torque type LSD. Minimised chatter. Smoother oil flow between plates increases LSD efficiency. High tension chrome molybdenum steel with high precision casting. Oil through system. Pressure ring features dual profiles to switch between (1 way & 1.5 way) (1 way & 2 way) (1.5 way & 2 way) without purchasing additional components. | $ 655.10 |
![]() | KAAZ LSD (Differentials) -DBT3020 | |
| Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 735.72 |
![]() | KAAZ LSD Super Q (Differentials) -DBT3020SQ | |
| Quiet locking performance featuring WPC treated clutch plates. Competition vehicles demand the up most from your differential and at times can push this component beyond it's boundaries. The KAAZ Limited Slip Differential is precision engineered to endure this type of "punishment". A reliable and highly competitive differential that has proven it's worthiness in professional racing vehicles all over the world. | $ 856.35 |
![]() | TOMEI TECHNICAL TRAX ADVANCE LSD (Differentials) -562027 | |
| 2 Way LSD that locks very well when ON or OFF throttle. T-TRAX ADVANCE has several advantages over similar mechanical limited slip differentials from other manufacturers. It features optimized cam angles, spring discs, larger surface area clutch discs and a higher initial torque setting. These all translate to improved corner entry, more precise driving, better corner exit traction as well as quicker response through successive corners. T-TRAX ADVANCE offers superior performance in every way. | $ 816.35 |
![]() | TRD Mechanical LSD (Differentials) -41301-JS402 | |
| Limited slip capacity is provided using a number of clutch plates, it exhibits a direct, reliable LSD effect. | DISCONTINUED |
![]() | Greenline Motorsports Light Weight Flywheel (Flywheels) -DTFWGL1JZ01 | |
| Chromoly. Made in Japan. | DISCONTINUED |
![]() | JUN Light Weight Flywheel (STD) (Flywheels) -2001M-T016 | |
| The JUN light weight flywheel is designed to the optimal weight, strength, and balanced for each car type from forged chrome-molybdenum steel. The surface is processed to increase wear and heat durability. Direct replacement for standard flywheels, JUN light weight flywheels are suitable for use with standard/standard replacement type clutches. | $ 246.29 |
![]() | SILK ROAD Chromoly Light Weight Flywheel (Flywheels) -FW01 | |
| Light weight, direct replacement flywheel made from chromoly steel. Suitable for use with standard clutch disc and cover. | $ 247.36 |
![]() | Auto Refine arc Pipe Stablizer (Anti Roll (Sway/Stabiliser) Bars) -(GL)SHSBAURJZZ3001 | |
| $ 252.27 |
![]() | NAGISA Auto Adjustable Stabliser Links (Anti Roll (Sway/Stabiliser) Bars) -NST009F | |
| Adjustable stabilizer/swaybar/anti roll bar links. | $ 124.72 |
![]() | ENDLESS RF-650 (Brake Fluids) -ORF-650500 | |
| Racing Super Fluid. Boiling Point: 323°C (Dry), 218°C (Wet). DOT 5. | $ 24.57 |
![]() | ENDLESS Brake Lines (Swivel Racing Type) (Brake Lines) -EB213 | |
| Designed for hard use and high durability without wasting pedal force improving brake pedal response. Steel and SUS304 stainless construction ensures excellent reliability with improved anti corrosion properties. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: SUS304 Stainless. Socket: SUS304 Stainless. | $ 165.35 |
![]() | ENDLESS Brake Lines (Swivel Steel Type) (Brake Lines) -EB213SS | |
| Steel and stainless construction ensures durability and excellent reliability. Swivel mechanism allows for easy installation. Hose: Stainless mesh. Fitting: Carbon Steel. Socket: Stainless. | $ 107.40 |
![]() | ENDLESS SSM (Brake Pads) -EP261SSM | |
| Super Street M-Sports. Street. Low dust. Material: Non asbestos. Brake rotor operating temperature: 0~530°C. Average friction coefficient: 0.30~0.40. | $ 101.10 |
![]() | ENDLESS SSS (Brake Pads) -EP261SS2 | |
| Super Street S-Sports. Street. Non asbestos. 0~480°C. Average friction coefficient: 0.38~0.45. | $ 82.52 |
![]() | ENDLESS SSY (Brake Pads) -EP261SY2 | |
| Super Street Y-Sports. Street. Non asbestos. 0~400°C. Average friction coefficient: 0.35~0.45. | $ 56.06 |
![]() | Project μ (Mu) D1 spec Inner SHOE (Brake Pads) -IS100A-D1SHOE | |
| Designed for high speed drift. Side (hand) brake pads. Super graphite metallic. 50~450°C. | $ 112.82 |
![]() | Project μ (Mu) Sports Inner SHOE (Brake Pads) -IS100A-SP-INSHOE | |
| Provides powerful initial braking force for initiation of spin turns and drift. Side (hand) brake pads. Non asbestos. 0~400°C. | $ 89.19 |
![]() | TRD Brake Pad (Black) (Brake Pads) -04491-ST010 | |
| Street use. μ=0.48~0.32. 0~500°C. | DISCONTINUED |
![]() | Biot Front Brake Offset Kit (Brake Upgrade Kits) -BR.OS.F-30-S | |
| Kit that replaces the standard brake rotors with larger diameter rotors and offsets the stock caliper outward from the center of the rotor using the included stays (brackets). Left and right set. | $ 897.61 |
![]() | Night Pager UCF30 Celsior Caliper Kit (Brake Upgrade Kits) -(GL)SHBKNPJZZ3001 | |
| Upgrade your brakes using UCF30 monoblock (single piece) calipers and 324mm diameter JZA80 rotors (most applications). Requires 65mm (or more) wheel clearance from brake rotor. Includes: 2 x modified UCF30 brake caliper (unpainted), 2 x brake rotor, sports brake pads and brake brackets (A2024 duralumin). | DISCONTINUED |
![]() | TRUST GREX Brake System (Brake Upgrade Kits) -15015650 | |
| Pair. | DISCONTINUED |
![]() | Do Luck Super Pro Front Lower Arm Bush (Front Side) (Bushes and Collars) -70110 | |
| DISCONTINUED |
![]() | Do Luck Super Pro Front Lower Arm Bush (Rear Side) (Bushes and Collars) -70112 | |
| DISCONTINUED |
![]() | Do Luck Super Pro Front Upper Arm Inner Bush (Vehicle Side) (Bushes and Collars) -70107 | |
| DISCONTINUED |
![]() | Do Luck Super Pro Rear Member Collar (Front) (Bushes and Collars) -SPF2553K | |
| DISCONTINUED |
![]() | Do Luck Super Pro Rear Member Collar (Rear) (Bushes and Collars) -SPF2520K | |
| DISCONTINUED |
![]() | Do Luck Super Pro Steering Rack Mount (Bushes and Collars) -SPF1193K | |
| DISCONTINUED |
![]() | IKEYA FORMULA Bush Removal Tool (Bushes and Collars) -IFAT01003 | |
| $ 74.64 |
![]() | IKEYA FORMULA Rear Knuckle Pillow Bush (Bushes and Collars) -IFAP05013 | |
| $ 101.41 |
![]() | IKEYA FORMULA Rear Member Spacers (Bushes and Collars) -IFAA02003 | |
|   | $ 107.15 |
![]() | Bee-R Yamaha Performance Damper (Chassis Bars) -(GL)SHCBBEEGEN01 | |
| Performance damper unit only. | DISCONTINUED |
![]() | Do Luck Floor Support Bar (Chassis Bars) -42032 | |
| DISCONTINUED |
![]() | BOYZ CST Zero 1 (Coilover Kits) -(GL)SHCOBYJZZ3001 | |
| DISCONTINUED |
![]() | BOYZ CST Zero 1 (SWIFT Version) (Coilover Kits) -(GL)SHCOBYJZZ3002 | |
| Swift Springs. | DISCONTINUED |
![]() | DG-5 Suspension Kit (Coilover Kits) -(GL)SHCODG5JZZ3001 | |
| Coilover kit that adjusts to all driving styles, for street and track conditions. - 30 Step adjustable damper. - Enhanced strength utilising a 50/60mm diameter cylinder. - Superior strength steel brackets. - Adjustable upper mounts (Applicable models). - Additional helper/traction spring for improved tractability (Applicable models). - Highest quality Swift 65mm springs. | $ 1802.83 |
![]() | GP Sports G-MASTER Suspension Kit (Coilover Kits) -501206S | |
| DISCONTINUED |
![]() | HKS HIPERMAX D' (Coilover Kits) -80015-AT009 | |
| Full set. | DISCONTINUED |
![]() | HKS HIPERMAX II (Coilover Kits) -1760-ST009 | |
| Full set. | DISCONTINUED |
![]() | JIC Magic FLT-A2 (Coilover Kits) -A2PPZ30 | |
| Adjustable height. 15 way adjustable damper. | $ 1276.83 |
![]() | JIC Magic FLT-AS (Coilover Kits) -FSRRZ30 | |
| Adjustable height. 10 way adjustable damper. | $ 746.45 |
![]() | SILK ROAD SECTION Sports SPEC-RM/A8 (Coilover Kits) -(GL)SHCOSRJZZ3001 | |
| Steel case, full height adjustable. 8 level damping adjustment. | DISCONTINUED |
![]() | TEIN Comfort SPORT (Coilover Kits) -GST60-K1SS3 | |
| DISCONTINUED |
![]() | TEIN EDFC (Coilover Kits) -EDK01-12120 | |
| Electronic Damper Force Controller. For use with TEIN suspension compatible with EDFC. | $ 258.82 |
![]() | TEIN MONO FLEX (Coilover Kits) -GST60-F1SS1 | |
| DISCONTINUED |
![]() | TEIN Street Advance (Coilover Kits) -GST60-21SS2 | |
| $ 558.75 |
![]() | TEIN Street Basis (Coilover Kits) -GST60-11SS2 | |
| $ 439.43 |
![]() | TEIN Super Drift (Coilover Kits) -GST60-D1SS1 | |
| DISCONTINUED |
![]() | TEIN Super Street (Coilover Kits) -GST60-A1SS2 | |
| DISCONTINUED |
![]() | TEIN Type FLEX (Coilover Kits) -DST60-71SS2 | |
| DISCONTINUED |
![]() | Project μ (Mu) Resevoir Tank Cover (Other) -ACC-TC03 | |
|   | $ 12.60 |
![]() | PROVA Resevoir Tank Cover (Other) -90000JL0200 | |
| Made from heat resistant fabric, this reservoir tank cover helps prevent spilling of fluid in your engine bay. Prevents stray brake or clutch fluid from coating the engine bay. The entire cover including the logo tag is made from heat resistant material, meaning you can rest assured that this cover will stand up to the harsh underhood environment in your vehicle. Not for use as heat shielding. Compatible with approx. 50-110mm diameter, roughly circular reservoirs. | DISCONTINUED |
![]() | ROBERUTA Cup Kit (Other) -(GL)SHOTROB-GEN-01 | |
| Mechanical lifter kit. | DISCONTINUED |
![]() | TRUST GReddy Resevoir Tank Cover (Other) -18001897 | |
| Renewed vertical shape improves functionality and is now more affordable. Absorbs liquid leakage caused by accidents and prevents secondary damage in the engine room. | $ 17.13 |
![]() | GP Sports G-Master Tie Rod End (Rods and Control Arms) -(GL)SHRAGPSJZZ3001 | |
| DISCONTINUED |
![]() | IKEYA FORMULA Adjuster Rear Lower Arms (Rods and Control Arms) -IFAO20003 | |
| Set of 2 (Left and right). | $ 574.47 |
![]() | IKEYA FORMULA Front Upper Arms (Rods and Control Arms) -IFAK13003 | |
$ 563.32 |
![]() | IKEYA FORMULA Rear Camber Adjuster Upper Arms (Rods and Control Arms) -IFAG11003 | |
$ 574.47 |
![]() | IKEYA FORMULA Rear Toe Adjuster Rods (Rods and Control Arms) -IFAH13003 | |
|   | $ 366.22 |
![]() | IKEYA FORMULA Roll Center Adjuster Pillow Lower Arms (Rods and Control Arms) -IFAE10002 | |
|   | $ 861.70 |
![]() | IKEYA FORMULA Traction Adjuster Rods (Rods and Control Arms) -IFAM16003 | |
|   | $ 247.36 |
![]() | JIC Magic Negative Upper Link (Rods and Control Arms) -NURA80 | |
| Negative Upper Arms. | DISCONTINUED |
![]() | NAGISA Auto Rear Pillow Lower Arms (Rods and Control Arms) -Rear-Lower-Arm-JZA80 | |
| $ 658.25 |
![]() | NAGISA Auto Rear Pillow Tension Rods (Rods and Control Arms) -Rear-Tension-Rod-JZA80 | |
|   | $ 241.69 |
![]() | NAGISA Auto Rear Pillow Toe Adjuster Rods (Rods and Control Arms) -Rear-Toe-Control-Arm-JZA80 | |
|   | $ 259.64 |
![]() | NAGISA Auto Super Tie Rod Ends (Rods and Control Arms) -Sp-tierodend-toyota | |
|   | $ 272.87 |
![]() | ORIGIN Pillow Rear Lower Arm (Rods and Control Arms) -FW-RLA-T0002-SET | |
| Toe adjustment arm. | DISCONTINUED |
![]() | SILK ROAD Rear Tension Rods (Rods and Control Arms) -1BN-G06 | |
$ 170.07 |
![]() | SILK ROAD Rear Toe Rods (Rods and Control Arms) -1BN-G03 | |
$ 215.43 |
![]() | SUPER NOW Super Steering Angle Tie Rod Ends (Rods and Control Arms) -(GL)SHRC-SNW0-JZZ30-01 | |
| 90 degrees more steering angle standard. Easy installation - of all bolt on! NMB 3 piece pillow balls (spherical bearings). | $ 403.77 |
![]() | SUPER NOW Tie Rod Ends (Rods and Control Arms) -(GL)SHRC-SNW0-JZZ30-03 | |
| NMB 3 piece pillow balls (spherical bearings). | $ 337.63 |
![]() | URAS Super Strengthened Tie Rods (Rods and Control Arms) -01065-3 | |
| Strengthened and increased steering angle. | $ 74.96 |
![]() | URAS Tie Rod Extension (Rods and Control Arms) -01060 | |
| "Tsukitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | $ 53.98 |
![]() | URAS Tie Rod Extension (Short) (Rods and Control Arms) -0105001 | |
| "Cyoitashi-no". For when standard length tie rods are not long enough when used with extended knuckles or lower arms. | DISCONTINUED |
![]() | KYB New SR Special (Shock Absorbers) -NSF9025 x 2 | |
| Sports shock absorber making everyday driving more comfortable. The NEW SR SPECIAL adopts the same shape as a genuine shock absorber, and optimizes the damping force characteristics without changing durability and other qualities, while firmly upgrading the basic performances such as cruising, turning and stopping of the car. Developed with the concept of a balance with the comfort, the ride is "Not hard, but hard!" - with the sense of wearing casual shoes for everyday use. | $ 118.28 |
![]() | KYB Super Special for Street (Shock Absorbers) -SSB9035 x 2 | |
| For drivers who want ride that is close to standard, but I also want to enjoy stable high-speed cruising. Damper adjustable (4 level). | $ 216.46 |
![]() | RS-R Ti2000 Suspension Coil (Springs) -T186TD | |
| Titanium formulated for extreme durability (higher sag resistance and corrosion resistance), and maximum drop height without compromising ride comfort. With the new materials used in the Ti2000, it has become possible to manufacture a highly durable suspension coil, with a smaller diameter, and fewer spring coils. The result is lightweight springs making a noticeable difference in driving performance. For example: Toyota Altezza SXE10: 7.0398kg (Std: 9.3594kg), 24.7% reduction. | $ 194.01 |
![]() | TEIN S.TECH Springs (Springs) -SKY06-S1B00 | |
| Dress Up Master. Easy lowering springs, in green to brightly decorate your suspension. Simple suspension tuning for beginners - at an affordable price. | $ 163.77 |
![]() | TRUST GReddy BL Comfort Down Spring (Springs) -TYG024 | |
| BL Comfort Springs produces an attractive style with a moderate drop in ride height while maintaining a comfortable ride. Designed for safe and calm handling characteristics even with the lowered ride height. Vanadium is mixed as metal additive in order to be durable for hard repetition of extension and compression during sports driving. The springs maintain high strain and high heat resistance and is durable against sag, maintaining stable performance. Different from springs designed only for low ride height, TRUST GReddy pursued the ideal design as a tuning parts maker. Total balance was considered while using the standard genuine shock absorber, calculate preload and it ensures stable traction when cornering. BL Comfort Spring is considered rebound performance conspicuous, and simultaneously enables comfortable ride, spring rate is suitable 10-20% up than standard genuine spring. Black coated, double shot peened. | $ 169.44 |
![]() | CUSCO Strut Tower Bar Type ALC OS (Strut Tower Bars) -185 535 AN | |
| Oval Aluminium-Carbon shaft. Center Bar: Made from aluminum and real carbon fiber wrap. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The end plate brackets provide flawless fitment per vehicle application and is finished in titanium gray coloring. Plates: Titanium gray color. To highlight the carbon fiber, the plates are finished in titanium gray, giving you the sporty or race look in your engine bay or trunk. Types: Two center bar types are available, specifically set per application. | $ 102.80 |
![]() | CUSCO Strut Tower Bar Type OS (Strut Tower Bars) -185 540 AN | |
| Oval Shaft design. Center Bar: Engineered inside and out, the stylish oval cross section made of lightweight aluminum. The inside of the piping is designed for the perfect balance between light weight characteristics and strength. Brackets: The steel end plate brackets painted in the trademarked Cusco blue provide flawless fitment per vehicle application. Types: Three center bar types are available, specifically set per application. | $ 79.18 |
![]() | CUSCO Strut Tower Bar Type ST (Strut Tower Bars) -185 510 A | |
| Steel shaft. | DISCONTINUED |
![]() | TRUST GReddy Strut Tower Bar STD (Strut Tower Bars) -14013003 | |
| DISCONTINUED |
![]() | HKS Pillow Ball Upper Mounts (Upper Mounts) -(GL)SHPBHK006 | |
| DISCONTINUED |
![]() | Blitz Racing Wheel Nut (Wheel Nuts) -14010 | |
| High-strength nuts made from forged SCM435 chrome-molybdenum steel. Lightweight nuts, weighing just 47g each. Made in Japan. | $ 22.99 |
![]() | Buddy Club P-1 Racing Nut (Wheel Nuts) -(GL)SHWN-BUD-P1R-01 | |
| Inconel 625 complexe alloy steel wheel nuts. | $ 33.01 |
![]() | CUSCO Racing Wheel Nut (Wheel Nuts) -00B 738 12516B | |
| Wheel nuts made from highly reliable chromium molybdenum steel (SCM435), which has a coefficient of thermal expansion close to that of bolts, so it does not loosen even at high temperatures during hard driving. A long penetration type (total length 48mm) is designed for a balance between weight, durability and ease of handling in motorsports. | $ 67.15 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN50 | |
| Set of: 12/16 x 19HEX duralumin wheel nut, 4 x 7 sided lock nut and 1 x lock nut socket. | DISCONTINUED |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 4H) (Wheel Nuts) -(GL)SHWNRAYGEN40 | |
| Set of: 12 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 83.52 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L32 5H) (Wheel Nuts) -(GL)SHWNRAYGEN05 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L32mm), 4 x lock nut and 1 x lock nut socket. | $ 114.64 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L37 6H) (Wheel Nuts) -(GL)SHWNRAYGEN30 | |
| Set of: 20 x 19HEX duralumin (A7075) wheel nut, 4 x lock nut and 1 x lock nut socket. | $ 137.38 |
![]() | RAYS DURA Series Duralumin Lock & Nut Set (Straight Type L42 5H) (Wheel Nuts) -(GL)SHWNRAYGEN15 | |
| Set of: 16 x 19HEX duralumin (A7075) wheel nut (L42mm), 4 x lock nut and 1 x lock nut socket. | $ 113.44 |
![]() | RAYS FORMULA Series Formula Nut FN-II Set (Wheel Nuts) -7414000012000 | |
| $ 218.89 |
![]() | RAYS FORMULA Series Formula Nut Set (Wheel Nuts) -(GL)SHWNRAYGEN01 | |
| DISCONTINUED |
![]() | RAYS RACING Series Racing 2 Piece Nut Set (Open End Type) (Wheel Nuts) -7413 74130000206BK | |
| Nut: Chrome molybdenum steel (SCM435). Collar: Aluminium A7075 T6. Open end type. | $ 27.81 |
![]() | RAYS RACING Series Racing Bolt Set (Wheel Nuts) -7413 74130000307BK | |
| Chrome molybdenum steel (SCM435) wheel bolts. | $ 40.03 |
![]() | RAYS RACING Series Racing Lock Nut Set (Open End Type) (Wheel Nuts) -7413 74130000251BK | |
| Chrome molybdenum steel (SCM435) wheel lock nuts. Open end type. | $ 35.84 |
![]() | RAYS RACING Series Racing Nut Set (Closed End Type) (RN-C) (Wheel Nuts) -7413 74130000012BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Closed end type. | $ 43.46 |
![]() | RAYS RACING Series Racing Nut Set (Open End Type) (Wheel Nuts) -7415 74130000224BK | |
| Chrome molybdenum steel (SCM435) wheel nuts. Open end type. | $ 51.15 |
![]() | TRD Lug Nut Set (Wheel Nuts) -42607-SP020 | |
| 20 nuts and socket. M12 x 1.5. For use with wheels with nut hole diameter greater than 21mm. Not suitable for use with Toyota OEM wheels. | DISCONTINUED |
![]() | WORK Duralumin Lock & Nut Set (Wheel Nuts) -(GL)WNWKGEN01 | |
| DISCONTINUED |
![]() | WORK Lock Nut Set (Wheel Nuts) -240254 | |
| Robust steel lock nut set. The special lock nuts prevent tightening or removal with a regular torque wrench, helping to prevent theft. | $ 66.77 |
![]() | WORK RS Nut (Wheel Nuts) -240007 | |
| This lightweight lock nut set is made from A6061-T6 material, which is also used in aircraft, and offers excellent strength and hardness. The anodized surface not only provides excellent corrosion and abrasion resistance, but its colorful design also adds a touch of fashionability, enhancing the dress-up effect. Thanks to its carefully calculated shape and design, the weight is 25g, less than half that of the average steel nut. The nuts are 21HEX, non-penetrating type with a total length of 34mm. The WORK logo "W" is featured on the top of the nuts and lock nuts. Pack of 20 (16 nuts, 4 lock nuts, 1 adapter wrench). | $ 84.72 |
![]() | CUSCO Alumi Bonnet Pins (Bonnet Pins and Hooks) -00B 817 AL | |
| $ 28.47 |
![]() | CUSCO Bonnet Pins (Bonnet Pins and Hooks) -00B 817 A | |
| $ 27.46 |
![]() | CUSCO Flat Bonnet Pins (With Lock) (Bonnet Pins and Hooks) -A517 C402 | |
| $ 38.55 |
![]() | CUSCO Spring Trunk Hooks (Bonnet Pins and Hooks) -00B 818 A | |
| Spring type rear hatch/boot lid hooks. | $ 30.55 |
![]() | KT Project Side Marker (Lights (Head, Tail, Indicator)) -T-5011 | |
| Side indicators. Pair (Left and right). | $ 89.63 |
![]() | BOMEX Aero Mirror (Mirrors and Mirror Covers) -Z30-AM-02FE | |
| Manual adjustment type FRP aero mirrors for weight reduction in aero dynamic form. Unpainted. Pair (Left and right). Requires rivet removal if dismantling before painting. | $ 316.21 |
![]() | Garage Vary Universal Turbulator (Other) -30-4001 | |
| Universal turbolator (vortex generator). To be modified to suit application. Unpainted. | $ 69.04 |
![]() | KENSTYLE Accent Screws (Other) -(GL)AS01 | |
| Universal dress up accent screws. Ideal for completing the wide fender look. | $ 27.72 |
![]() | SARD GT Wing 014 More Info (Spoilers/Wings) -61554-1400 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1410.98 |
![]() | SARD GT Wing 015 More Info (Spoilers/Wings) -61557-1610-Type1 | |
| Universal carbon GT wing with swan neck style stays. 2 wing end plate sizes available. Swan neck (hanging type) allows creation of greater downforce than conventional type stays. | $ 1470.82 |
![]() | Behrman WISE SQUARE JZA80 Look Tail (Exterior Parts) -(GL)OTEP-BEH-JZZ30-01 | |
| Tail lights based on JZA80 MKIV Supra design. | DISCONTINUED |
![]() | ORIGIN Front EX Canard (Exterior Parts) -W037-SET | |
| Universal. Pair (Left and right). | $ 95.05 |
![]() | ORIGIN Front Under Canard (Exterior Parts) -D-032-SET | |
| Universal. Pair (Left and right). | $ 149.29 |
![]() | ORIGIN Side Under Canard (Exterior Parts) -D067-SET-Carbon | |
| Universal. Pair (Left and right). | DISCONTINUED |
![]() | SARD Aero Blade (Exterior Parts) -61967 | |
| Sold individually (1 piece). | $ 20.31 |
![]() | SARD Front Bumper Canard (Exterior Parts) -61965 | |
| Carbon. Includes: brackets and nut/bolt set. Universal (approx 465 x 165mm). | DISCONTINUED |
![]() | SARD Front Under Flap (Exterior Parts) -61966 | |
| Carbon. Includes: nut/bolt set and double sided tape. Universal (approx 510x270mm). | DISCONTINUED |
![]() | URAS Connection Rod (Exterior Parts) -(GL)01066-M-1 | |
| Support lip spoilers, canards, rear spoilers, and diffusers. Adjustable length. Universal item. | $ 38.68 |
![]() | HKS DHOB (Fuel Additives) -5303-SA001 x 12 | |
| $ 217.69 |
![]() | Top Secret Fuel Cap Cover (Fuel Filler Caps) -(GL)OTFFTOPGEN01 | |
| Gas/Petrol cap cover. | DISCONTINUED |
![]() | Blitz i-Burner Expansion Kit (Globes) -14566 | |
| DISCONTINUED |
![]() | Blitz i-Burner Spark Lights (Globes) -14565 | |
| DISCONTINUED |
![]() | Koito High Power Halogen (Globes) -9006-J (H-07) | |
| $ 15.12 |
![]() | Ganador Super Mirror (Mirrors) -SM-41PCL | |
| DISCONTINUED |
![]() | TRD Aluminium Oil Filler Cap (Oil Filler Caps) -ENEATDGEN001 | |
| DISCONTINUED |
| TRD Duracon Oil Filler Cap (Oil Filler Caps) -ENEATDGEN002 | ||
| DISCONTINUED |
![]() | TRUST GReddy Oil Filler Cap (Oil Filler Caps) -13911022 / 13911012 | |
| Chrome or chrome blue. | DISCONTINUED |
![]() | TRUST GReddy Cable Ties (Other) -18001742 | |
| GReddy logo cable ties. | $ 14.19 |
![]() | HKS Emblem (Stickers and Emblems) -51003-AK027 | |
| Silver. 87 x 35mm. | DISCONTINUED |
![]() | HKS Emblem - Silver (Stickers and Emblems) -51003-AK125 | |
| Diamond cut aluminum HKS emblem. Size: 89mm x 36mm. | $ 15.75 |
![]() | HKS Emblem - Tuned By HKS (Stickers and Emblems) -51003-AK126 | |
| ABS resin emblem of Tuned by HKS. Size:115mm x 19mm. | $ 28.22 |
![]() | HKS Sticker - Emboss (Stickers and Emblems) -51003-AK119 | |
| HKS Embossed sticker (2 pcs. included). Sticker size : 100mm x 50mm. | $ 12.35 |
![]() | HKS Sticker - Fast (Stickers and Emblems) -51003-AK123 | |
| Mt. Fuji collaboration sticker with Japanese character meaning "fast". | $ 12.35 |
![]() | HKS Sticker - Fujiyama Silver (Stickers and Emblems) -51003-AK116 | |
| Design combined with HKS logo and Mt. Fuji. Hairline finish. Sticker size : 235mm x 52mm. | $ 12.35 |
![]() | HKS Sticker - Metal Logo (Stickers and Emblems) -51007-AK231 | |
| Metallic sticker of HKS standard logo. Set of three different sized stickers. Sticker size: L - 95.5mm x 37mm. M - 51.5mm x 20mm. S - 27mm x 10.5mm. | $ 12.35 |
![]() | HKS Sticker - Stripe Silver (Stickers and Emblems) -51003-AK115 | |
| Stripe sticker of the HKS logo (2 pcs. included). Hairline finish. Sticker size : 230mm x 23mm. | $ 12.35 |
![]() | HKS Sticker - Super Racing (Stickers and Emblems) -51003-AK122 | |
| HKS logo on oil color. | $ 12.35 |
![]() | HKS Sticker - Tuned by (Stickers and Emblems) -51003-AK117 | |
| Tuned by HKS sticker. Hairline finish. | $ 12.35 |
![]() | HKS Sticker - URL (Stickers and Emblems) -51003-AK121 | |
| Sticker of the HKS website URL (2 pcs. included). Hairline finish. Sticker size : 234mm x 22mm. | $ 12.35 |
![]() | HKS Sticker - Variety (Stickers and Emblems) -51003-AK120 | |
| Small-sized transcription sticker. | $ 12.35 |
![]() | Monster Sport Chrome Emblem (Stickers and Emblems) -ZZZE32 | |
| ABS plastic emblem with chrome (mekki) finish. | $ 23.56 |
![]() | Monster Sport Door Reflection Sticker (Stickers and Emblems) -896119-0000M | |
| High brightness reflective sheet. | $ 24.76 |
![]() | Monster Sport Premium Sticker (Stickers and Emblems) -896116-0000M | |
| Set of 10 premuim Monster Sport logo stickers. | DISCONTINUED |
![]() | Project μ (Mu) Project μ Emblem (Stickers and Emblems) -ACC-TC17 | |
| Logo emblem with beautiful hairline material logo. Compact size that is easy to stick on familiar items such as smartphones. H60mm x W20mm. | $ 8.94 |
![]() | TOMEI 70 Sticker (Stickers and Emblems) -761031 | |
| Sticker design as used by TOMEI in the 1970's ('70). Small size. | $ 9.76 |
![]() | TOMEI Emblem (Stickers and Emblems) -763000 | |
| 120 x 22mm. | $ 19.65 |
![]() | TOMEI Sticker Sheet (Stickers and Emblems) -761027 | |
| A4 size sticker sheet (22 individual). Non waterproof. | DISCONTINUED |
![]() | Top Fuel Emblem (Stickers and Emblems) -26735831 | |
| Metal plate emblem with engraved Top Fuel logo. | $ 12.28 |
![]() | TRD Carbon Emblem E Type (Stickers and Emblems) -08231-SP074 | |
| 27 x 150mm. Discontinued. | DISCONTINUED |
![]() | TRD Emblem (B Type) (Stickers and Emblems) -08231-SP090 | |
| 26 x 70mm. Discontinued. | DISCONTINUED |
![]() | TRD Emblem (Logo Type) (Stickers and Emblems) -08231-SP088 | |
| 24 x 171mm. Discontinued. | DISCONTINUED |
![]() | TRUST GReddy GReddy 3D Emblem (Stickers and Emblems) -18001743 | |
| DISCONTINUED |
![]() | Blitz Towing Strap (Tow Hooks/Straps) -13890 | |
| Tow strap with embroidered patch type logo. Size: Length of strap only 220mm, width 50mm / metal fittings height 50mm, width 70mm, hole diameter 16mm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 20.31 |
![]() | CUSCO Tow Strap (Tow Hooks/Straps) -00B CTV RD | |
| Bracket type for easy installation on standard traction hook mounting screw. 2 inch (50mm) wide high strength strap belt (Load capacity: 3500 kgf). Universal part. Please prepare bolts (not included) of screw size according to vehicle that can be used for 16mm holes of product bracket. When strap belt portion is to be used outside of the bumper, it may be necessary to drill and cut to bumper. | $ 33.07 |
![]() | GP Sports G-SONIC Towing Strap (Tow Hooks/Straps) -030921 | |
| $ 41.04 |
![]() | TAKATA Tow Strap (Tow Hooks/Straps) -78009-0 | |
| Universal tow strap. Stainless steel bolt bracket. Capable of two more than 1800kg. Maximum bolt size: 12mm (7/16 inch). 17cm belt. | $ 63.93 |
![]() | TOMEI Towing Strap (Tow Hooks/Straps) -763032 | |
| Universal towing strap (belt). Maximum Towing Capacity: 3.0 tons. Loop Length: 10 cm. * Universal item - processing and bolts/nuts are required separately for installation on the vehicle. | $ 42.33 |
![]() | BBS Air Valve Cap (Valve Caps) -P5615011 x 4 | |
| Set of 4. | $ 19.84 |
![]() | Monster Sport Air Valve Cap (Valve Caps) -680500-0000R | |
| Barrel-shaped aluminium air valve caps that fits your fingertips, and has excellent workability due to the non-slip knurling. The shape has been carefully designed to make it easy to turn even in the narrow spaces between the wheel spokes, and to reduce irritation to the fingertips even in cold weather. Set of 4. | $ 27.15 |
![]() | Project μ (Mu) Air Valve Cap (Valve Caps) -ACC-TC50 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | $ 13.13 |
![]() | Project μ (Mu) Air Valve Cap (Old) (Valve Caps) -ACC-TC15 | |
| Set of 4 billet aluminum air valve caps. Finished in a brilliant green alumite with P.mu logo. | DISCONTINUED |
![]() | SEEKER Real Carbon Air Valve Cap (Valve Caps) -140858982 | |
| Set of 4 black chrome plated aluminium air valve caps with real carbon fibre sides. Laser printed SEEKER logo on top. | $ 36.85 |
![]() | TRUST GReddy Air Valve Cap (Valve Caps) -18001996 | |
| Aluminium air valve caps (Titanium gradation colour). 11mm x 11mm. Set of 4. | $ 15.43 |
Back | Back to TOP